ASSEMBLING INSTRUCTION COMPONENTS SERIES 1 2 3 4 5 6 SIDE PANEL ADJUSTABLE LOWER PANEL BACK PANEL DOORS TOP PANEL SHELF HARDWARE 7 8 9 10 11 12 13 14 STORAGE CABINET HUCTH MINI FIX MINI FIX STRAIGHT HINGES PULLS 1/8" x 5/8" 1/8" x 7/8" STEEL SHELF CONNECTING BOLT HOUSING WARDROBE HANGER WOOD SCREW SCREW SUPPORT INSTALLING BODY TOOL REQUIRED : - PHILLIPS HEAD SCREW DRIVER AND FLAT HEAD SCREW DRIVER 6 7 1 4 3 1 Step 1 Step 2 Step 3 Step 4 Step 5 Attach the mini fix connecting bolt into the nylon a. Attach the lower panel Attach another side panel Attach the back panel Attach the top panel sockets provided in each panel. to the side panel. to the pre-assembled to the pre-assembled to the pre-assembled b. Tighten all the mini fix components and tighten all components and tighten components and tighten housings. the mini fix housings. all the mini fix housings. all the mini fix housings. 13 Step 8 a. Install WARDROBE HANGER Step 6(2436 SCH) Step 7 ( 2436 WCH ) by using 1/8" x 5/8" SCREW a. Put the steel shelf support pin into b. Position the adjustable shelf Put the steel shelf support pin into the NOTE : the predrilled holes at the side panels. on the steel shelf support pin. predrilled holes at the side panels - STEP 7 AND 8 NOT REQUIRED FOR INSTALLING 2436 HAV & 2436 SCH INSTALLING DOORS Note: Installing doors only for 2436 HAV 9 5 9 Step 1 DETAIL 1 Step 2 Step 3 Step 4 a. Attach the hinges to Attach the doors to the Align the doors by adjust Attach the pulls to the the doors. cabinet's body. the hinges doors by using 1/8" x 7/8" ( see detail 1 ) screws. Clip on features All of the Formcase products use clip on hinges. Once the doors is attached to the cabinet / hutch,the doors can be easily removed or reinstalled without using a tool. How to remove a clip on hinge? How to reinstall a clip on hinge? Simply push the clip, located near Position the clip to the part of the the side panel and pull out the hinge at the side panel, and then doors. push the door to reconnect the hinge.