XVIIth International Conference on Electrical Machines Chania Crete XVIIth International Conference on Electrical

Document Sample
XVIIth International Conference on Electrical Machines Chania Crete XVIIth International Conference on Electrical Powered By Docstoc
					                        XVIIth International Conference on Electrical Machines, Chania, Crete Island, Greece, September 2 – 5, 2006
                                                                      Activities Schedule
         Saturday, September 2nd, 2006                                     Monday, September 4th, 2006                                     Tuesday, September 5th, 2006
                                                             08:00-09:00                  Registration                       08:00-09:00                  Registration
                                                             09:00-10:00          Plenary Oral Session OSK2                  09:00-10:00          Plenary Oral Session OSK3
                                                                                Keynote presentation on traction motors                        Keynote presentation on generators for WT
                                                             10:00-10:20                 Coffee Break                        10:00-10:20                 Coffee Break
11:00-13:30                  Registration                    10:20-11:30             Poster Sessions PMM                     10:20-11:30             Poster Sessions PTM
                                                                             PMM1: Permanent Magnet Machines                                PTM1: Power Generation by Renewable Sources
                                                                             PMM2: Drives of Induction Machines                             PTM2: Drives of Synchronous, PM and DC
                                                                             PMM3: Design of Electric Machines and                                 Machines
                                                                                    Teaching                                                PTM3: Transformers and Inductors
                                                                             PMM4: Testing, Measurements, Acoustic Noise                    PTM4: Electric Vehicles and Power Electronics
                                                                                    and Vibration Aspects
                                                             11:40-13:20               Oral Sessions OMM                     11:40-13:20               Oral Sessions OTM
                                                                             OMM1: Permanent Magnet Machines                                OTM1: Power Generation by Renewable Sources
                                                                             OMM2: Drives of Induction Machines                             OTM2: Drives of Synchronous Machines
                                                                             OMM3: Design of Electric Machines                              OTM3: Transformers
                                                                             OMM4: Teaching                                                 OTM4: Testing, Measurements, Acoustic Noise
                                                                                                                                                   and Vibration Aspects
13:30-14:10            Opening Ceremony                      13:20-1430                      Lunch                           13:20-1430                      Lunch
14:10-15:10        Plenary Oral Session OSK1                 14:30-15:40             Poster Sessions PMA                     14:30-15:40              Poster Sessions PTA
                Keynote presentation on power transformers                   PMA1: Permanent Magnet Machines                                PTA1: Power Generation by Renewable Sources
                                                                             PMA2: Drives of Variable Reluctance Machines                          - Flywheels
                                                                             and Particular Control Techniques                              PTA2: Variable Reluctance Machines
                                                                             PMA3: Induction Machines                                       PTA3: Theory, Modeling and Simulation
                                                                             PMA4: DC Machines and Actuators                                PTA4: Monitoring and Diagnostics
                                                                             PMA5: Materials and Losses                                     PTA5: Thermal Phenomena and Cooling
15:10-15:30                Coffee Break                      15:40-16:00                  Coffee Break                       15:40-16:00                  Coffee Break
15:30-16:40            Poster Sessions PSA                   16:00-17:40               Oral Sessions OMA                     16:00-17:40               Oral Sessions OTA
               PSA1: Permanent Magnet Machines                               OMA1: Monitoring and Diagnostics                               OTA1: Power Generation by Renewable Sources
               PSA2: Synchronous Machines                                    OMA2: Drives of Variable Reluctance                            OTA2: Variable Reluctance Machines
               PSA3: Induction Machines                                            Machines                                                 OTA3: Theory, Modeling and Simulation
               PSA4: Special Machines                                        OMA3: Electric Vehicles and Power Electronics                  OTA4: Losses, Thermal Phenomena and Cooling
               PSA5: Superconducting Machines                                OMM4: DC Machines and Actuators
16:50-18:30             Oral Sessions OSA                                                                                    17:50-18:20               Closing Ceremony
               OSA1: Permanent Magnet Machines
               OSA2: Synchronous Machines
               OSA3: Induction Machines
               OSA4: Special Machines
20:00-22:00     Welcome Reception at Minoa Palace Hotel        19:30           Departure from Minoa Palace Hotel for the
                                                                                            Official Dinner

         Sunday, September 3rd, 2006
07:00-07:45                Registration
   08:00      Departure from Minoa Palace Hotel for the
                      One Day Cultural Visit to Knossos
                            Archaelogical Site
                                                                                    1/34
                                     XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

Saturday, September 2nd 2006
11:00-13:30 : Registration
13:30-14:10 : OPENING CEREMONY (Athina1 Room)
14:10-15:10 : PLENARY ORAL SESSION OSK1 (Athina1 Room)
Keynote presentation by D. Spiliopoulos, (Schneider Electric SA) Greece, on description of
activities of the company and on “Recent advances on power transformers”

15:10-15:30 Coffee Break

15:30-16:40 POSTER (DIALOGUE) SESSION PSA1: PERMANENT MAGNET
                                              MACHINES
                                       Saturday, September 2nd 2006
                                                                                                                 Country of the
  No      Ref                      Paper title                                         Authors                   corresponding
                                                                                                                     author
                A Permanent Magnet Generator for Small Scale             J.R. Bumby, N. Stannard and R.
PSA1-1    141   Wind Turbines                                            Martin                                       UK
                A Method for Dynamic Analysis of an Interior
                Permanent Magnet Motor Based on Nonlinear                K. Nakamura, M. Ishihara, and
PSA1-2    313   Magnetic Circuit                                         O. Ichinokura                              Japan
                High-speed permanent magnet generators design
PSA1-3    163   and testing                                              Yanush Danilevich, Victor Antipov          Russia
                An Attempt to Extend the Flux Weakening Range of         Imen Abdennadher, Ahmed
PSA1-4    180   a Single Stator Dual Rotor PM Machine                    Masmoudi and Ahmed Elantably               Tunisia
                Numerical design of DC brush motor with rare-
                earth magnets for ABS system including
PSA1-5    234   tolerances of input parameters                           G. Ombach, J. Junak and A. Ackva          Germany
                A Stator Turn Fault Tolerant Strategy for Interior PM
                Synchronous Motor Drives in Safety Critical              Youngkook Lee, Hyung-Bin Ihm, Tae-
PSA1-6    244   Applications                                             Hoon Lee and T.G. Habetler                  USA
                Comparative Evaluation of Axial Flux versus Radial       M. Krishnamurthy, B. Fahimi and K.
PSA1-7    245   Flux Permanent Magnet Synchronous Machines               D. Oglesby                                  USA
                Design and Implementation of a Tubular Brushless
PSA1-8    249   DC Motor for Direct-Drive Applications                   S.H. Mao, B.J. Lin, and M.C. Tsai          Taiwan
                Design of Interior Permanent Magnet Motors for
PSA1-9    250   Smoothening Back-EMF Waveform                            H.S. Chen and M.C. Tsai                    Taiwan
                Development of the Discontinuous Primary                 Kenji Suzuki, Yong-Jae Kim, Masaya
PSA1-10   251   Permanent Magnet Linear Synchronous Motor                Watada and Hideo Dohmeki                   Japan
                Optimised design of concentrated winding PM              A. Castagnini, P. Faure Ragani, G.
PSA1-11   254   brushless motors                                         Secondo                                     Italy
                Evaluation of Eddy Current Loss in Tubular
                Permanent Magnet Motors by Three-Dimensional
PSA1-12   266   Finite Element Analysis                                  J. Chai, J. Wang and D. Howe                 UK
                Magnetic Field Distribution in Brushless Permanent
                Magnet AC Motors with Interior Permanent
PSA1-13   267   Magnets (IPM) and Slotted Stator                         F. Poltschak, W.Amrhein                    Austria
                A Brushless Permanent Magnet Motor with Hybrid
PSA1-14   274   Windings                                                 L. Y. Hsu and M. C. Tsai                   Taiwan
                Torque ripple reduction design of Multi-layer Interior
                Permanent Magnet Synchronour Motor by using              Liang Fang, Soon-O Kwon, Peng
PSA1-15   276   Response Surface Methodology                             Zhang, Jung-Pyo Hong                       China
                Reluctance Network Analysis Model of a Permanent
                Magnet Generator Considering an Overhang                 K. Nakamura, M. Ishihara, and O.
PSA1-16   311   Structure                                                Ichinokura                                 Japan
                Multipolar Reluctance Generator Using Stator Core        O. Ichinokura, T. Ono, T. Tashiro, K.
PSA1-17   312   with Permanent Magnet                                    Nakamura, and A. Takahashi                 Japan
                Distribution, coil-span and winding factors for AFPM
PSA1-18   346   with concentrated windings                               S. E. Skaar, Ø. Krøvel                     Norway
                Application of a Toroidal Harmonic Expansion for
                Computing the Magnetic Field from a Balanced 6-          J. Selvaggi, S. Salon, O. Kwon, and
PSA1-20   284   Pole Permanent-Magnet Motor                              M.V.K. Chari                                USA

                                                      2/34
                                    XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

    15:30-16:40 POSTER (DIALOGUE) SESSION PSA2: SYNCHRONOUS
                                             MACHINES
                                      Saturday, September 2nd 2006
                                                                                                               Country of the
  No      Ref                     Paper title                                        Authors                   corresponding
                                                                                                                   author
                New Approach to Identification of Turbogenerator
PSA2-1    135   Rotor Quantities                                       G. Rogozin, N. Pjatlina                    Ukraine
                About Currents from the Damping Winding Bars of
                Three-phase Synchronous Generator Connected
PSA2-2    188   on Rectifier                                           C. Nica, S. Enache, M. A. Enache          Romania
                Time-stepping FEM Based Modeling of a
                Synchronous Generator connected to infinite bus
PSA2-3    213   via a Delta-star Transformer                           Luo Ying-li, Zhang Xinli Meng Liang         China
                The Analysis and Validation of Saturation Curve
PSA2-4    214   Series of Synchronous Generators                       Zhang Xinli, Luo Yingli, Liu Xiaofang       China
                Half-order modelling of turboalternators - An          S. Racewicz, D. Riu, N. Retiere, P.
PSA2-5    217   adapted method of parameter identification             Chrzan                                     Poland
                Computation of Forces and Stresses in the Winding      Georg Traxler-Samek, Axel Fuerst,
                Overhang of Large Hydrogenerators at Faulty            Alexander Schwery and Carlos
PSA2-6    221   Conditions                                             Ramirez                                  Switzerland
                On the Identification of the Synchronous Machine       L. Vicol, M. Tu Xuan, J.-J. Simond,
PSA2-7    229   Parameters Using Standstill DC Decay Test              I.A. Viorel                              Switzerland
                A Comprehensive Algorithm for the estimation of
PSA2-8    233   Synchronous Generator Parameters                       Elias Kyriakides                           Cyprus
                Damping Shaft Torsional Oscillation of
                Synchronous Generator by Fuzzy Logic-Controlled        Mohd. Hasan Ali, Toshiaki Murata,
PSA2-9    247   SMES                                                   and Junji Tamura                           Japan
                Special consideration in On-line Partial Discharge
                (PD) Monitoring for Stator Insulation Condition
PSA2-11   293   Assessment of Large Steam-Turbo Generators             E. Sharifi, S. Amini, K. Rahmani             Iran
                Stochastic Evaluation of Turbine-Generator Shaft
PSA2-12   294   Torsional Torques in a Six-Phase Power System          S.O. Faried and S. Aboreshaid              Canada
                Design of A Steam-resistant Insulation System for
PSA2-13   329   the Stator of A Low-voltage Turbo-Generator            V. Sihvo, J. Pyrhönen                      Finland
                                                                       Ling Luo, Chunting Mi, Haran
                Numerical Modelling of Large Solid Pole                Karmaker, Peter Zong and George
PSA2-14   338   Synchronous Motors                                     Gao                                         USA
                A Method of Eddy Current Calculation for Stator        Katsumi Yamazaki and Yuta
PSA2-15   372   Core Ends of Turbine Generators                        Watanabe                                   Japan
                The Nonlinear Characteristics of Turbo-generator       Kang Jinping, Luo Yingli, Wang Jing,
PSA2-16   383   under Abnormal Operating Conditions                    Liu Xiaofang, MengLiang                     China
                 Pulsating torques during starting of synchronous
                motors: Implementation and comparative analysis
PSA2-17   408   of different measurement methods                       Christer Danielsson, Holger Persson        Sweden
                On the Design of a Remote Intelligent Excitation       Yannis L. Karnavas, Nicolaos P.
PSA2-18   437   Controller for a Synchronous Generator                 Polyzos, Demetrios P. Papadopoulos         Greece
                The influence of magnetic saturation towards the
                induced voltage for homopolar synchronous              Sorin Deaconu, Lucian Tutelea,
PSA2-19   486   generator                                              Gabriel N. Popa, Iosif Popa               Romania
                Analysis of Unbalanced Magnetic Pull in Train-
                Lighting Brushless Alternators with Skewed Rotor       K.P.P. Pillai, Achuthsankar S. Nair,
PSA2-20   492   under Static Eccentricity and Conical Rotor Motion     G.R. Bindu                                  India
PSA2-21   497   Rotor monitoring tool for turbogenerators              E. Guillot                                 France
                Permeance network method coupling with                 Dmitry Petrichenko, Michel Hecquet,
                experimental design in order to optimize turbo-        Pascal Brochet, Vyacheslav
PSA2-22   498   alternators                                            Kuznetsov, Daniel Laloy                    France
                Line-Switching Test Based Practical Approach for
PSA2-23   508   Identification of Synchronous Machine Parameters       R. Wamkeue, J. Christian, I. Kamwa         Canada
                Behavior of Syncronous Generators with Rotor
                Excentricity Evaluated by the Polarization Fixed       I.R.Ciric, F.Hantila, M.Maricaru, and
PSA2-24   436   Point Method                                           S.Marinescu                               Romania
PSA2-25   604   Limits of turbine generator’s underexcited operation   Z. Maljkovic, M. Pavlica                   Croatia
                Surface currents in solid poles of large
PSA2-26   639   synchronous machines at direct start                   Yujing Liu, Holger Persson                 Sweden
                Magnetic Unbalance in a Hydrogenerator's rotor
PSA2-27   685   and its effects on the Synchronous machine             A. Millan, A. Romero                     Venezuela
                Steady-State Performance of a Hybrid Excitation        Nobuyuki Naoe, Tadashi Fukami,
PSA2-28   687   Single-Phase Synchronous Generator                     Akiyuki Minamide, Kazuya Takemata          Japan
                A BAS application of a Series Magnetized
PSA2-29   691   Synchronous Machine                                    D. Hagstedt, M. Alakula, T. Bergh          Sweden


                                                     3/34
                                    XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

15:30-16:40 POSTER (DIALOGUE) SESSION PSA3: INDUCTION MACHINES
                                      Saturday, September 2nd 2006

                                                                                                              Country of the
  No      Ref                      Paper title                                        Authors                 corresponding
                                                                                                                  author
                                                                        Lieven Vandevelde, Claus B.
                Radial forces and torque ripples in split-phase         Rasmussen and Jan A. A.
PSA3-1    584   induction motors                                        Melkebeek                                Belgium
                A Complete Induction Motor Model for Low and
PSA3-2    119   High Frequency Analysis                                 A. Boglietti, A. Cavagnino                Italy
                A New Posibility for the Determination of the           S. Enache, A. Campeanu, I. Vlad, M.
PSA3-3    202   Induction Machines Parameters                           A. Enache                               Romania
                Influence of Magnetic Saturation on Induction           Marko Hinkkanen, Anna-Kaisa Repo,
PSA3-4    203   Motor Model Selection                                   Jorma Luomi                              Finland
                A Comparison of 3D Models for Determining Skin          C. del Perugia, R.D. Findlay, N.
PSA3-5    246   Effect in Induction Motor End Rings                     Stranges                                 Canada
                The Comparison Study of Different Models Used
                for Calculation of the Transient Processes of an
PSA3-6    252   Induction Motor During Frequency and Soft Starting      Maria Dems, Krzysztof Komeza             Poland
                Energy Efficiency of small Induction Machines:          Wim Deprez, Annick Dexters, Johan
PSA3-7    269   Comparison between Motor and Generator Mode             Driesen, Ronnie Belmans                  Belgium
                Electromagnetic Excitation Forces in Small              Y. Yoshikuwa, A. Imagi, H. Kometani
PSA3-8    279   Induction Motors                                        and J. Okada                             Japan
                Analysis of Induction Motor Static Eccentricity using   M.B.B. Sharifian, J. Faiz, B.M.
PSA3-9    289   Time Stepping Finite Element                            Ebrahimi                                   Iran
                Using Improved Winding Function Theory and 2D
                Finite Element Method to Model Air-Gap                  E. Khosrowshahli, E. Sharifi
PSA3-10   298   Eccentricity in Induction Motors                        Ghazvini, S. Shamloo                       Iran
                Detailed Transient Analysis of Self Excited             Mehmet Akbaba, Amin M. Sultan,
PSA3-11   326   Induction Generator Feeding Induction Motor             Ebrahim Al-Gallaf                        Bahrain
                Die-cast Copper Rotor Motors via Simple                 R. Kimmich, M. Doppelbauer, D.T.
PSA3-12   358   Substitution and Motor Redesign for Copper              Peters, J.G. Cowie, E.F. Brush          Germany
                The complete electrical supply characterization of
                an induction motor that operates under a given
PSA3-13   365   NEMA unbalance                                          L. F. Mantilla, M. A. Rodríguez           Spain
                The Influence of Stochastic Properties on the Motor     C. Bastiaensen, W. Deprez, S.
PSA3-14   384   Parameters of an Induction Machine                      Stevens, J. Driesen                      Belgium
                Optimization-Based Steady State Analysis of
                Parallel-Operated Three Phase Induction
PSA3-15   390   Generators and Motors                                   Alolah and Alkanhal                   Saudi Arabia
                Steady-State Analysis of a Mixed Faults Three-
                phase Squirrel-cage Induction Motor using Time          B.M. Ebrahimi, J. Faiz and M.B.B.
PSA3-16   391   Stepping Finite Element Method                          Sharifian                                  Iran
                                                                        L. Petkovska, G. Cvetkovski, V.
PSA3-17   393   FE Torque Analysis of a Shaded-Pole Motor               Sarac                                    FYROM
                Stator-Tooth Optimization of an Induction Machine       C. Schlensok, S. Felgentrager, D.
PSA3-18   453   with Squirrel-Cage Rotor                                van Riesen, K. Hameyer                  Germany
                Behaviour Analysis of Induction Machine Under
PSA3-19   458   Broken Bars and Distorted Voltage Input                 J. Kappatou, A. Safacas                  Greece
                Insulation Aging in AC motors due to mechanical         J-Ph. Lecointe, S. Duchesne, R.
PSA3-20   463   stresses                                                Romary, J-F. Brudny, P. Schlupp          France
                Parallel Scheme for Estimation of Rotor Position
                and Stator Resistance in Sensorless Speed Control       R. Ghosn, M. Pietrzak-David and B.
PSA3-21   200   of a Doubly Fed Induction Machine                       de Fornel                               Lebanon
                The influence of the frame and windings on the          S. L. Nau, B. C. Bork, H. L. V. dos
PSA3-22   196   natural frequencies of stator of induction motors       Santos, N. Sadowski and R. Carlson        Brazil
                A solid rotor induction machine for turbo-assist        J.R. Bumby, E Spooner and M.
PSA3-23   104   operation                                               Jagiela                                    UK




                                                     4/34
                                    XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

 15:30-16:40 POSTER (DIALOGUE) SESSION PSA4: SPECIAL MACHINES
                                      Saturday, September 2nd 2006

                                                                                                               Country of the
  No      Ref                     Paper title                                      Authors                     corresponding
                                                                                                                   author
                                                                     L. M. de Castro Neto, J. R.
                Revisiting the MMF Analysis of Asymmetrical Two-     Camacho, H. R. de Azevedo, S. C.
PSA4-1    130   Phase Induction Motors                               Guimaraes, C. H. Salerno                      Brazil
                A New Hybrid Brushless dc Motor without              E. Afjei, M.M. Nezamabadi and M.A.
PSA4-2    169   Permanent Magnet                                     Saati                                          Iran
                Modeling Techniques for Hybrid Excited Doubly
PSA4-3    175   Salient Motor with Rotor Skewing                     Xiaoyong Zhu, Ming Cheng                      China
                A New Claw Pole Synchronous Machine with DC
                Excitation in the Stator:a Comparison with the       H. Aloui, A. Masmoudi, M. Lecrivain
PSA4-4    191   Conventional Claw Pole Alternator                    and M. Gabsi                                 Tunisia
                Magnetic Anisotropy considered for Synchronous
PSA4-5    193   Claw-Pole Alternators with Axial Flux Component      S. Schulte, F. Henrotte, K. Hameyer         Germany
                Model to Evaluate the Influence of the Winding
PSA4-6    207   Data on the Brush Wear in Universal Motors           A. Di Gerlando, R. Perini                     Italy
                                                                     Tadashi Fukami, Masatoshi
                Performance of a Dual-Winding Reluctance             Momiyama, Kazuo Shima, Ryoichi
PSA4-7    211   Generator With Multiple-Barrier Rotor                Hanaoka, and Shinzo Takata                   Japan
PSA4-8    264   Electrostatic Hysteresis Motor                       M. Crivii and M. Jufer                     Switzerland
                Some types of unconventional electromechanical
PSA4-9    361   energy converters: application and classification    I. Shvedchikova                              Ukraine
                2D-FEM Modeling of an Axial-Flux Solid-Rotor         M. Valtonen, A. Parviainen and J.
PSA4-10   404   Induction Motor                                      Pyrhönen,                                    Finland
                Clawpole Transverse-Flux Machine with Hybrid         M. R. Dubois, H. Polinder, D.
PSA4-11   412   Stator                                               Massicotte                                   Canada
                Light Structures for Low-Speed Multi-Pole
PSA4-12   421   Machines for Direct-Drive Applications               P.J.Tavner, E. Spooner                         UK
                                                                     P J Tavner, R A McMahon, P
PSA4-13   439   Rotor Design and Performance for a BDFM              Roberts, E Abdi-Jalebi, X Wang                 UK
PSA4-14   531   Limits and Advantages of Scaling as a Fast           Kang D H, Chang J H, Viorel I -A,             Korea
                Procedure for Designing Transverse Flux Motors       Viorel Alina Cristina, Strete Larisa
                                                                     Jaewon Lim, Ho-Yong Choi, Sun-Ki
                Developement of Tubular Type Linear Generator        Hong, Dong-Hyeok Cho and Hyun-
PSA4-15   578   for Free-Piston Engine                               Kyo Jung                                      Korea
                Brushless DC Motor with Frequency Generator           Hiro Takano, Mikihiro Kishio, Hideaki
PSA4-16   581   Substituted for Position Sensor                      Nanko                                        Japan
                Comparative Study on the equivalent circuit of the
                electric motor and traveling wave piezoelectric
PSA4-17   589   ultrasonic motor                                     Mircea Ignat, George Zarnescu               Romania
                High torque motor (vernier reluctance magnet
PSA4-18   606   machine) for specific systems                        Ph. Enrici, J. Jac, N. Ziegler, D. Matt      France
                Performance Comparison of Three and Four-Phase       W. Missaoui, L. El Amraoui Ouni, F.
PSA4-19   647   Linear Tubular Stepping Motors                       Gillon, M. Benrejeb, P. Brochet              France




                                                    5/34
                                  XVII International Conference on Electrical Machines
                             Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                            Web-site: http://www.ntua.gr/ICEM2006/

15:30-16:40 POSTER (DIALOGUE) SESSION PSA5: SUPERCONDUCTING
                                            MACHINES
                                     Saturday, September 2nd 2006

                                                                                                           Country of the
 No      Ref                     Paper title                                    Authors                    corresponding
                                                                                                               author
                                                                  E.N. Andreev, L.I. Chubraeva, M.V.
               Development of Synchronous Alternator with HTSC    Manzuk, M.Yu. Platonova, S.S.
PSA5-1   348   Armature                                           Timofeyev                                   Russia
                                                                  E.N. Andreev, L.I. Chubraeva, D.A.
               Development of Three-Phase Transformer with        Korotkov, M.Yu. Platonova, D.A.
PSA5-2   347   HTSC Windings and Amorphous Alloy Cores            Volkov                                      Russia
               Introducing complex engineering approach into      I. Vajda, L. Farkas, S. C. Kashyap, D.
PSA5-3   544   curricula by superconductivity                     K. Pandya                                  Hungary
               Design of permanent motors/generators for energy
               storage flywheels with Superconducting magnetic
PSA5-4   610   bearings                                           Z.Kohari                                   Hungary
                                                                  Raimond Grimberg, Adriana Savin,
               Nondestructive evaluation of electrical machines   Rozina Steigmann, Sorin Leitoiu,
PSA5-5   633   using superconductor windings                      Alina Bruma                                Romania
                                                                  K. Sivasubramaniam, E.T. Laskaris,
               HTS HIA Generator and Motor for Marine             M. R. Shah, J. W. Bray, N. R.
PSA5-6   744   Applications                                       Garrigan                                     USA




  16:50-18:30 ORAL SESSION OSA1: PERMANENT MAGNET MACHINES
                                     Saturday, September 2nd 2006
                                                 Athina1 Room


                                                                                                           Country of the
 No      Ref                     Paper title                                    Authors                    corresponding
                                                                                                               author
               Electromagnetic Design Analysis of Tooth Coil,     A. Di Gerlando, G. M. Foglia, R.
OSA1-1   235   Voltage Regulated, PM Synchronous Generators       Perini, M. Ubaldini                          Italy
               Maximum Efficiency Operation of Interior           Toshiaki Murata, Kazuhito
               Permanent Magnet Synchronous Generator Based       Nakamura, Junji Tamura and
OSA1-2   156   on State Space Model                               Takeshi Tsuchiya                            Japan
               Analysis of a High Pole Number Motor with          S. J. Salon, O-Mun Kwon, M.V.K.
OSA1-3   352   Assymetries Using a Reduced Model                  Chari                                        USA
               Unbalanced Magnetic Pull in High-Speed
               Brushless Permanent Magnet Motors –
OSA1-4   426   Experimental Observations and Results              U.M. Hoefer, A.G. Jack, B.C. Mecrow           UK
               Magnet Loss Analysis of Permanent-Magnet
OSA1-5   457   Synchronous Motors with concentrated windings      C. Deak, A. Binder, K. Magyari             Germany




                                                   6/34
                                     XVII International Conference on Electrical Machines
                                Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                               Web-site: http://www.ntua.gr/ICEM2006/

         16:50-18:30 ORAL SESSION OSA2: SYNCHRONOUS MACHINES
                                       Saturday, September 2nd 2006
                                                    Athina2 Room


                                                                                                               Country of the
 No        Ref                     Paper title                                       Authors                   corresponding
                                                                                                                   author
                                                                       M.Kakiuchi, T.Otaka, S.Nagano,
                                                                       T.Tokumasu, M.Fujita, K.Nagakura,
                 Study on Frequency Characteristics of                 J. Shiina, H.Ito, H.Shimada, D.
OSA2-1     216   Synchronous Generator Damper Circuit                  Hiramatsu, K. Nagasaka                     Japan
                 Connection to Weak Electrical Supply Network of
                 Two Synchronous Machines Operating in Recovery        A. Campeanu, Mihai Radulescu,
OSA2-2     287   Regime                                                Marian Badica, Razvan Prejbeanu           Romania
                 Development of High-Temperature                       Gunar Klaus, Wolfgang Nick, Heinz-
                 Superconducting Electrical Machines at Siemens        Werner Neumüller, Georg Nerowski
OSA2-3     343   AG                                                    and William McCown                        Germany
                 Effect of Voltage Swells on the Transient
OSA2-4     413   Performance of Saturated Synchronous Motors           Ahmed M. El-Serafi, Narayan C. Kar         Canada
                                                                       Di Wu, Haran Karmaker, Peter
                 Simplified 3D-effects modeling for low L/D Aspect     Zhong, Colin Sun, Hengfeng Chen,
OSA2-5     562   Synchronous Motors                                    George Gao                                  USA




          16:50-18:30 ORAL SESSION OSA3: INDUCTION MACHINES
                                       Saturday, September 2nd 2006
                                                    Athina3 Room


                                                                                                               Country of the
 No        Ref                     Paper title                                       Authors                   corresponding
                                                                                                                   author
                 The Effect of Practical Operating Conditions on the   Wim Deprez, Cindy Bastiaensen,
OSA3-1     345   Performance of Induction Machines                     Stijn Stevens, Ronnie Belmans              Belgium
                 Cast Copper Induction Motor Inter-bar Resistance      S. Englebretson, J.L. Kirtley Jr., K.
OSA3-2     367   Measurements                                          Molina                                      USA
                 Induction Machine Analysis for the Diagnosis of
OSA3-3     518   Rotor Faults Using the Leakage Magnetic Field         J. Kappatou, C. Marchand, A. Razek         Greece
                 Estimating circuit models for a deep-bar Induction
OSA3-4     614   Motor using the harmonic finite element analysis      A.-K. Repo, A. Niemenmaa, A. Arkkio        Finland
                 DTC vs. FOC for an induction machine-based
                 flywheel energy storage system associated to a        Gabriel Cimuca, Stefan Breban,
                 variable-speed wind generator – Experimental          Mircea M. Radulescu,Christophe
OSA3-5     206   results                                               Saudemont, Benoît Robyns                  Romania




                                                     7/34
                                    XVII International Conference on Electrical Machines
                              Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                             Web-site: http://www.ntua.gr/ICEM2006/

           16:50-18:30 ORAL SESSION OSA4: SPECIAL MACHINES
                                      Saturday, September 2nd 2006
                                                  Ariadne Room


                                                                                                          Country of the
  No      Ref                     Paper title                                     Authors                 corresponding
                                                                                                              author
                Estimation of the Boundaries for the Claw-pole
OSA4-1    110   Geometry in Electrical Water Pump Applications       H. Hembach, D. Gerling, S. Beyer       Germany
                An Innovative Axial-Flux Multi-Stack Homopolar       P. Bolognesi, O. Bruno, L.
OSA4-2    731   SRM                                                  Taponecco                                Italy
                Numerical Modeling of 3-D Comb Drive
                Electrostatic Accelerometers Structure - Field And
OSA4-3    323   Mechanical Models                                    S. Wiak, K. Smółka                      Poland
                Soft Magnetic Composite Axial flux seven-phase
OSA4-4    434   machine                                              F. Locment, E.Semail and F. Piriou      France
                Dynamic Characteristics Analysis of 3D Conveyer
                System Linear Induction Motor for Control            Su jin Jeon, Sun bum Kwon, and
OSA4-5    535   Algorithm Developments                               Jung ho Lee                              Korea




20:00-22:00 : Welcome Reception at Minoa Palace Hotel




                                                    8/34
                                   XVII International Conference on Electrical Machines
                              Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                             Web-site: http://www.ntua.gr/ICEM2006/

Sunday, September 3rd 2006

08:00 : Departure from Minoa Palace Hotel for the One Day Cultural Visit to
Knossos Archaelogical Site


Monday, September 4th 2006

09:00-10:00 : PLENARY ORAL SESSION OSK2 (Athina1 Room)
Keynote presentation by R. Periot, (ALSTOM Transport) France, on description of activities
of the company and on “Traction motors : some technological aspects”

10:00-10:20 Coffee Break

       10:20-11:30 POSTER (DIALOGUE) SESSION PMM1: PERMANENT
                                       MAGNET MACHINES
                                      Monday, September 4th 2006

                                                                                                             Country of the
  No      Ref                     Paper title                                     Authors                    corresponding
                                                                                                                 author
                Effect of Back-EMF Constraints on Fractional-Slot
                Surface PM Machines Designed for Wide               Ayman M. EL-Refaie, Thomas M.
PMM1-1    340   Constant-Power Speed Range Operation                Jahns, John W. McKeever                      USA
                Torque ripple improvement with IPMSM rotor
PMM1-2    351   shape modification                                  S. Vivier, V. Lanfranchi, G. Friedrich      France
                A Backstepping Controller for Sensorless Speed
                Control of DC Servo Motor Using Adaptive            A. Farrokh Payam, B. Mirzaeian
PMM1-3    353   Backstepping Observer                               Dehkordi, M. Keivanfard                       Iran
                Torque ripple and cogging torque of surface         P. Salminen, H. Jussila, M. Niemelä
PMM1-4    363   mounted PM machines with concentrated windings      and J. Pyrhönen                             Finland
                Harmonic Current Injection Approach To Cogging
                Torque Suppression In Axial Flux PM Synchronous     J.A. Tapia, D. Soto, A. Valenzuela,
PMM1-5    368   Machines                                            R. Wallace                                   Chili
                Experimental Validation of an Axial Flux PM         J. A. Tapia, D. Gonzalez, R. R.
PMM1-6    369   Machine with Field Weakening Capability             Wallace, M. A. Valenzuela                    Chili
                An analytical equation for cogging torque
                calculation in surface mounted permanent magnet     K. Y. Lu, P. O. Rasmussen, E.
PMM1-7    382   motors                                              Ritchie                                    Denmark
                Toward Accurate Torque Calculation in Brushless     John Simkin, Christopher P. Riley,
PMM1-8    398   Permanent Magnet and Reluctance Motors              and Alexandros M. Michaelides                 UK
                Iron Loss Calculation in a Reciprocating Tubular
                Permanent Magnet Motor with Soft Magnetic
PMM1-9    406   Composite                                           T. Ibrahim, J. Wang, and D. Howe              UK
                Determination of d and q reactances of permanent-   J. A. Güemes, A. M. Iraolagoitia and
PMM1-10   444   magnet synchronous motors using FEM                 P. Fernández                                 Spain
                Design parameters for directly network connected
                non-salient permanent magnet synchronous            J. Kinnunen, J. Pyrhφnen, O.
PMM1-11   455   generator                                           Liukkonen, P. Kurronen                      Finland
                Disk Built-in DC Motor With High Coercive Nd-Fe-B
PMM1-12   456   Magnets                                             M. Zagirnyak, P. Belyi, D. Miljavec         Ukraine
                Analytical vs. Numerical calculation of magnetic
PMM1-13   477   circuits of PM Machines at no-load and load         A. Rastogi, A. Binder                      Germany
                Optimization Elements of the PM Excited
PMM1-14   566   Transverse Flux Linear Motors                       D. H. Kang and P. Curiac                     Korea
                Experimental Tests on a 9-phase Direct Drive PM     D. Vizireanu, X. Kestelyn, S.Brisset,
PMM1-15   509   Axial-Flux Synchronous Generator                    P. Brochet, E.Semail                        France
                Comparison of non-salient pole permanent magnet     J. Figueroa, L.Radaorozandry,
PMM1-16   529   motors structures for traction application          J.Cros, P. Viarouge                         Canada
                Modeling and controlling attractive forces in
PMM1-17   545   permanent magnet machines                           H. Polinder, M. Huizer, M. Scuotto        Netherlands

                                                   9/34
                                    XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

                Cogging torque elimination in permanent magnet
PMM1-18   551   machines                                               Bernard Laporte                            France


       10:20-11:30 POSTER (DIALOGUE) SESSION PMM2: DRIVES OF
                                       INDUCTION MACHINES
                                       Monday, September 4th 2006

                                                                                                               Country of the
                                     Paper title                                      Authors
  No      Ref                                                                                                  corresponding
                                                                                                                   author
                                                                       E.S. de Santana, E. Bim and W.C. do
PMM2-1    120   Induction Motor Control using Predictive Algorithm     Amaral                                      Brazil
                Closed-Form Analytical Investigation of
                Electromagnetic Torque-Ripple Components in
                Induction Motor Drive Fed from PWM VSI with DC-                                                   Czech
PMM2-2    133   Link Voltage Pulsation                                 J. Klima                                  Republic
                Robust Sensorless Operation of Vector Controlled
                AC motors using Extended Kalman Filter trained
PMM2-3    172   neural networks                                        Vedam Subrahmanyam                          India
                Control Limits of Three Phase AC Controller under      A.I. Alolah, R.M. Hamouda and A.
PMM2-4    189   Induction Motor Load                                   Eltamely                                Saudi Arabia
                Improved Rotor Flux Linkage Oriented Control of
                an Induction Motor with Included Magnetic
PMM2-5    258   Saturation                                             D. Dolinar, G. Stumberger, P. Ljusev      Slovenia
                High Performance Field Oriented Rotor Control of       V. Cecconi, V. Di Dio, A. O. Di
PMM2-6    322   Induction Generators                                   Tommaso, D. La Cascia, R. Miceli            Italy
                                                                       Amar Golea, Abdelhakim Saiad,
                Induction Motor Control using Variable Structure       Noureddine Golea, Naziha
PMM2-7    357   Approach                                               Benounnas                                  Algeria
                Computer investigation of the dynamic behaviour of
                an asynchronous motor using fuzzy logic for            Z. Koutsogiannis, G. Adamidis, A.
PMM2-8    438   immediate torque control                               Fyntanakis,                                Greece
                Microscopic Investigation of Energy Conversion in
                a Squirrel-Cage Induction Motor Drive under Field-
PMM2-9    447   Oriented Control                                       M. Krishnamurthy and B. Fahim               USA
                In Wind-Unwind Application the Comparative
                Realization of Tension Control with Induction
                Motors Which are Run by Different Controlled
PMM2-10   449   Techniques                                             N. Bekiroglu and E. Aycicek                Turkey
                Optimal speed trajectory tracking of an AC motor
                drive system with simultaneous fuzzy logic             Eleftheria S. Sergaki, George S.
PMM2-11   423   minimization of its electromechanical losses           Stavrakakis,                               Greece
                Adaptive Fuzzy Control of Reversible Rectifier
                Feeding Induction Motor with Improved Power            M.T. Benchouia , A. Golea, S.E.
PMM2-12   465   Factor                                                 Zouzou and A. Ghamri                       Algeria
                Development of a Wavelet theory-based Field-
                Oriented Control method for small power Electrical
PMM2-13   485   Machines                                               E. Mitronikas                              Greece
                Robust Parameter Estimation Procedures for             Carlos H. S. De Vasconcelos, Zelia
PMM2-14   488   Vector Controlled Induction Machine Drives             M. Assis Peixoto                            Brazil
                Robust Flux Weakening Operation of Induction
PMM2-15   489   Motor Drives Based on Stator Flux Vector Control       D.Casadei, G. Serra, A. Tani, L.Zarri       Italy
                Inverter Nonlinearities Compensation in a Double
                Fed Induction Motor Drive close to Synchronous         M.S. Carmeli, F. Castelli Dezza, R.
PMM2-16   496   Speed                                                  Perini                                      Italy
                Design of a Robust voltage controller for an
                induction generator in an autonomous power             Alon Kuperman, Vitaly Spitsa, Raul
PMM2-17   539   system                                                 Rabinovici, Ezra Zeev, George Weiss         Israel
                Design of Transient Excitation Sequences for
PMM2-18   554   Sensorless Control of AC Machines                      Th.M. Wolbank, J.L. Machl                  Austria
                Vectored Direct Torque Control for Induction Motor     Hmidet Ali, Bacha Faouzi, Dhifaoui
PMM2-19   588   under Losses Minimization                              Rachid                                     Tunisia
                Transient states of polymerizer drive including real
PMM2-20   594   load of specially designed induction motor             A. Rusek, A. Popenda                       Poland
                Modified Field Oriented Control of Induction
PMM2-21   662   Machine                                                Samir Moulahoum, Omar Touhami              France
                PWM Waveform impact on Induction Motor Drive           Z. Papazacharopoulos, I. Xydis, I.
PMM2-22   736   Efficiency                                             Tsakirakis                                 Greece
                Power factor monitoring of induction machines by       D. Raptis, A. Kladas and J.
PMM2-23   803   using rotor flux oriented vector control               Tegopoulos                                 Greece




                                                    10/34
                                    XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

       10:20-11:30 POSTER (DIALOGUE) SESSION PMM3: DESIGN OF
                         ELECTRIC MACHINES AND TEACHING
                              Monday, September 4th 2006

                                                                                                             Country of the
  No      Ref                     Paper title                                       Authors                  corresponding
                                                                                                                 author
                Tooth Concentrated Fractional Windings for Low
PMM3-1    362   Speed Three Phase a.c. Machines                        M. Cistelecan, B. Cosan, M. Popescu     Romania
                The Implementation of Computational Fluid
                Dynamics and Electromagnetic Finite Element
                Methods as Standard Design Tools for Large             B. Streibl, E. Schlemmer, J.
PMM3-2    385   Synchronous Generators                                 Schönauer and F. Ramsauer                Austria
                Design of Plastic Bounded Iron Powder Core
PMM3-3    386   Motors                                                 A. Reinap, M. Alaküla                    Sweden
                Optimum designed induction motors with die-cast
                aluminum and copper cages – a comparative
PMM3-4    464   study                                                  W. Jazdzynski                            Poland
                A Rational Way Combining Analytical and
                Numerical Models with Deterministic Global
                Optimization Algorithms for the Design of Electrical   J. Fontchastagner, F. Messine, Y.
PMM3-5    555   Machines                                               Lefevre                                  France
                Preliminary Design and FEM Analysis of a Rotary-
PMM3-6    726   Linear Brushless Machine                               P. Bolognesi, L. Taponecco                Italy
                On the optimal choice of the end ring resistance for
                one slot per pole per phase single phase induction
PMM3-7    716   motors                                                 M. Poloujadoff                           France
                Hegel’s Dialectical Method as a Means for
                Activating the Students’ Thinking during Delivering
PMM3-8    134   the Lectures on the Transients in Induction Motors     G. Rogozin                               Ukraine
                Real Time Phasor Diagram of Synchronous                D. Makuc, M. Berlec, M. Bugeza, K.
PMM3-9    192   Machine as an Educational Tool                         Lenasi                                  Slovenia
                Development of Wind Turbines Prototyping
                Software Under Matlab/Simulink®Through                 M.E.H. Benbouzid, D. Diallo, Y.
PMM3-10   204   Undergraduate Student Projects                         Amirat, H. Mangel and A. Mamoune         France
                Development and implementation of an automated
                computer aided laboratory exercise integrated in
PMM3-11   333   electrical drives courses                              I. Tsoumas, A. Safacas                   Greece
                Free Fall Attraction as a Practical and Theoretical
PMM3-12   450   Project in Electrical Engineering Education            Carlsson, J. Soulard                     Sweden
                Teaching numeric modeling and design of electrical
PMM3-13   514   devices                                                A.Reinap                                 Estonia
                Education modernization of Electric Power
                Engineering Education at Budapest University of
PMM3-14   692   Technology and Economics                               I. Vajda, S. Halasz                     Hungary
                                                                       Luo Yingli, Chen Xiqiang, Wang Hao,
                Animation Model bank for Electrical Machinery          Wang Jing, Niu Yinsuo, Ma Bo, Liu
PMM3-15   661   Teaching                                               Xiaofang, Zhang Jianhua                   China
                Preparation measurements scripts, analysis,
                selection of measuring apparatus units for
                education process aims diagnostics of rotary
PMM3-16   630   machines on example car alternator                     Konrad Skowronek, Artur Wozniak          Poland
                Design Considerations for a High Performance
                Electric Drive for an Unmanned Helicopter Main
PMM3-17   650   Rotor                                                  Sam J. Nall and Phil H. Mellor             UK
                Skew Effect Parameters of AC Machines with
PMM3-18   171   Skewed Slots                                           Vedam Subrahmanyam                        India




                                                    11/34
                                     XVII International Conference on Electrical Machines
                                Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                               Web-site: http://www.ntua.gr/ICEM2006/



          10:20-11:30 POSTER (DIALOGUE) SESSION PMM4: TESTING,
         MEASUREMENTS, ACOUSTIC NOISE AND VIBRATION ASPECTS
                       Monday, September 4th 2006

                                                                                                                 Country of the
  No       Ref                     Paper title                                        Authors                    corresponding
                                                                                                                     author
                 Digital Calculation of Frequency of Sinusoidal
PMM4-1     105   Signal                                                 T. Benslimane, B. Chetate                   Algeria
                 A Simplified Online-technique for the Detection of     Pedro V. Jover Rodriguez, J. A.
PMM4-2     114   Eccentricity in Induction Motor                        Antonino, Antero Arkkio                     Finland
                 Wavelet Analysis for the Detection of Inter-turn
                 Short-circuits and Broken Rotor Bars in Induction      J. A. Antonino, P. Jover, M. Riera, A.
PMM4-3     115   Machines                                               Arkkio, J. Roger-Folch                       Spain
                 Development of a Small Spherical AC Servo Motor        T. Yano, T.Takatuji, S.Osawa,
PMM4-4     157   for Laser Tracker                                      Y.Motomura, T.Itabe, T.Suzuki               Japan
                 A new approach for EMI simulation of complex
PMM4-5     220   electrical systems                                     E. Napieralska, D. Roger, K. Komeza         France
                 Modified Method to Determine Rotor-Bar-Iron
                 Resistance in Three-Phase Copper Squirrel-Cage
PMM4-6     230   Induction Motors                                       Konrad Dabala                               Poland
                 Electromechanical system for static force              Emmanuel Baudet, Patrick Ragot,
PMM4-7     304   measurements on keyboard musical instruments           Miroslav Markovic and Yves Perriard       Switzerland
                                                                        Dieter Gerling, Rainer Hildebrand,
                 Test-Bench for High-Speed High-Power Electrical        Harald Hofmann, Kathrin Jungnickel,
PMM4-8     178   Drives                                                 Benno Lange                                Germany
                 Stator Winding Resistance Measurement of
PMM4-9     394   Inverter- Fed Induction Machines                       Y. Plotkin, M. Stiebler, M. Centner        Germany
                 Measurement and detection of Barkhausen Noise:
PMM4-10    487   the time-domain approach                               B. Guinand, R.Goyet, O. Garrigues           France
                 A Hybrid Algorithm for the Non Destructive Testing     A.Nouicer , M.E.H.Latreche and
PMM4-11    542   of the Magnetic Materials                              M.Feliachi                                  Algeria
                 Vibration Sparking, an unrecognized damage
PMM4-12    154   mechanism of High Voltage Windings                     Manfred Liese                              Germany
                 Validity of numerical impulse response test in
                 studying unbalanced magnetic pull in electrical
PMM4-13    577   machines with parallel stator windings                 Andrej Burakov and Antero Arkkio            Finland
                 On-line monitoring of the induction motor stator
                 windings temperature by using the modulating           A. Balestrino, O. Bruno, A. Landi, L.
PMM4-14    611   function approach                                      Sani                                         Italy
                 Impedance Vector Monitoring strategy for on-line
PMM4-15    506   detection of eccentricity in induction motors          Andreas Stavrou                             Cyprus
                 An Effective Technique on Extracting Negative
                 Sequence Harmonic Information in Stator Current        Long Wu, Zhi Gao, Thomas G.
PMM4-16    704   Based Induction Motor Condition Monitoring             Habetler, and Ronald G. Harley               USA
                 Detection of Broken Rotor Bars in Induction Motor      Rastko Fiser, Miroslav Bugeza,
PMM4-17    710   Drives Using Run-up Test                               Primoz Bajec, Henrik Lavric                Slovenia
                                                                        F. Ishibashi, T.Takemasa,
PMM4-18    127   Space Flux Pattern of DC-brushless Motor               T.Nishizawa, S.Noda                         Japan
                 Comparison of Vibration Characteristics of 3-phase
                 Permanent Magnet Machines with Concentrated,
PMM4-19    131   Distributed and Modular Windings                       J. Wang, Z. P. Xia and D. Howe                UK
                 Acoustic Optimization of a Switched Reluctance
PMM4-20    144   Machine using Numerical Simulation                     B. Schmulling, K. Hameyer                  Germany
                 A New Structure for Stator Pole to Reduce Torque
                 Ripple and Acoustic Noise in Switched Reluctance       M. Bahramgiri, M. Babaei, M.
PMM4-21    305   Motor                                                  Sahebzamani                                   Iran
                 Vibrations optimization of brushless power steering
                 motor with taking into account magnetostriction
PMM4-22    335   effects                                                G. Ombach, J. Junak and A. Ackva           Germany
                 Noise Reduction using Multi-Phase Windings for
PMM4-23    359   Synchronous Machines                                   S. Schulte, K. Hameyer                     Germany
                 A coupled magnetic, structural and acoustic model      M. Furlan, R.Rebec, A. Černigoj, D.
PMM4-24    387   of the alternator                                      Čelič, M. Boltežar                         Slovenia
                 Modeling and verification of magnetic forces in the
PMM4-25    388   alternator                                             A. Černigoj, M. Furlan                     Slovenia
                 Acoustic Measurement for detecting Manufacturing       D. van Riesen, C. Schlensok, F.
PMM4-26    468   Faults in Electrical Machines                          Henrotte, K. Hameyer                        Belgium
                 Permanent magnet synchronous machine                   S. Bujacz, M. Hecquet, M.
PMM4-27    601   simulations to predict vibrations and acoustic noise   Goueygou, P. Brochet, J. Nieznanski         Poland
                 Vibroacoustic Methods in the Diagnosis of the
PMM4-28    694   Electric Machines                                      H. Balan, R.Tirnovan, P.Karaissas          Romania
                                                     12/34
                                    XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

                                                                      J. Le Besnerais, A. Fasquelle, M.
                A fast noise predictive multiphysical model of the    Hecquet, A. Ait-Hammouda, V.
PMM4-29   712   PWM-controlled Asynchronous Machine                   Lanfranchi, P. Brochet, A. Randria      France
                Magneto-elastic Coupling model for the study of
PMM4-30   728   Vibrations in a Thin Plate                            F. Hocini, H. Mohellebi                 Algeria
                An effective test bench for PM synchronous motor      L. Sgarbossa, M. Dai Pre, S.
PMM4-31   709   characterization                                      Bolognani                                Italy




  11:40-13:20 ORAL SESSION OMM1: PERMANENT MAGNET MACHINES
                                       Monday, September 4th 2006
                                                   Athina1 Room


                                                                                                           Country of the
  No      Ref                      Paper title                                     Authors                 corresponding
                                                                                                               author
                Comparative study of 2-phase Flux-Switching and
                Doubly-Salient Permanent Magnet Brushless             Wei Hua, Ming Cheng, Z.Q. Zhu and
OMM1-1    137   Machines                                              D. Howe                                  China
                Cogging Torque Analysis on PMSM Machines by           D. van Riesen, C. Schlensok, B.
OMM1-2    467   Simulation and Measurement                            Schmulling, K. Hameyer                 Germany
                A general design strategy for multiphase machine
                applied to the design of a 7-phase fractional slot    F. Scuiller, JF Charpentier, E.
OMM1-3    397   concentrated winding PM Machine                       Semail, S. Clenet                       France
                Maximum torque and inductances of surface             P. Salminen, A. Parviainen, and J.
OMM1-4    399   mounted PM machines                                   Pyrhönen                                Finland
                Physical Modeling of PM Synchronous Machine
                With Short Circuit Winding Faults Based on Circuit-
OMM1-5    684   Field Coupled FE Analysis                             O. A. Mohammed, S. Liu, and Z. Liu       USA




 11:40-13:20 ORAL SESSION OMM2: DRIVES OF INDUCTION MACHINES
                                       Monday, September 4th 2006
                                                   Athina2 Room


                                                                                                           Country of the
  No      Ref                      Paper title                                     Authors                 corresponding
                                                                                                               author
                Stator Winding Design for Multi-Phase Two-Motor       E.Levi, M.Jones, S.N.Vukosavic and
OMM2-1    100   Drives with Single VSI Supply                         H.A.Toliyat                               UK
                Field Oriented Control of self-excited Induction      A. Bellini, G. Franceschini, E.
OMM2-2    673   Generator                                             Lorenzani, C. Iori, C. Tassoni           Italy
                Dynamic behaviour of Low Power and Low Cost
OMM2-3    261   Induction Machine Drives with Single Shunt            K. Kanelis, W. Zeng                    Germany
                Operational Behaviour of a Vector Controlled
                Induction Machine Drive System fed by a Three-        P. Potamianos, E. Mitronikas, A.
OMM2-4    371   Phase Space-Vector Modulated Matrix Converter         Safacas                                 Greece
                Self–Tuning Speed Controller Of Indirect Field–
OMM2-5    563   Oriented Induction Machine Drives                     M. Masiala and A. Knight                Canada




                                                    13/34
                                    XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

  11:40-13:20 ORAL SESSION OMM3: DESIGN OF ELECTRIC MACHINES
                                       Monday, September 4th 2006
                                                   Athina3 Room


                                                                                                         Country of the
  No      Ref                     Paper title                                   Authors                  corresponding
                                                                                                             author
                Design Studies on Squirrel Cage Induction Motors
                with Transient Finite Element Calculations and
OMM3-1    113   Directly Coupled Circuits                          C. Grabner                              Germany
OMM3-2    212   Advancements in Electric Machines                  Jacek F. Gieras                          USA
                Optimization of a Toothless BLDC Motor with
                Faulhaber Winding using a Multiphysic Analytical
OMM3-3    265   Model                                              P. Ragot, M. Markovic, Y. Perriard     Switzerland
                Innovating engineering-focused software solution   G. Lacombe, A. Foggia, Y. Maréchal,
OMM3-4    525   for rotating electrical machines                   X. Brunotte                              France
OMM3-5    695   Calculation of Stator Slot Harmonic Fields         S. Williamson and Y.N. Feng                UK




                11:40-13:20 ORAL SESSION OMM4: TEACHING
                                       Monday, September 4th 2006
                                                  Ariadne Room


                                                                                                         Country of the
  No      Ref                     Paper title                                   Authors                  corresponding
                                                                                                             author
                A novel Web platform dedicated to teach Power      I.C Kobougias, A.C. Nanakos, N.P.
OMM4-1    282   Electronics laboratory exercises                   Filippas, E.C. Tatakis                   Greece
                Teaching Electrical Engineering Students in
OMM4-2    519   Creative Design                                    T.Jokinen                                Finland
                Java applets of electrical machines support
OMM4-3    617   laboratory work                                    M. Centner, R. Hanitsch                 Germany
                Computational Electromagnetics in the Teaching
                Environment of an Electrical Machines Laboratory   Paulo G. Pereirinha and Carlos
OMM4-4    570   – A Small Magnetic Levitator                       Lemos Antunes                           Portugal
                Teaching Electric Drives: a Comparison of Basic    A. Molina-Garcia, E. Gomez, J.A.
OMM4-5    648   Modeling and Real Industrial A.C. Drives           Fuentes and J.A. Villarejo                Spain




13:20-14:30 Lunch at Minoa Palace Restaurant




                                                    14/34
                                    XVII International Conference on Electrical Machines
                              Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                             Web-site: http://www.ntua.gr/ICEM2006/

       14:30-15:40 POSTER (DIALOGUE) SESSION PMA1: PERMANENT
                                        MAGNET MACHINES
                                       Monday, September 4th 2006

                                                                                                               Country of the
  No      Ref                     Paper title                                        Authors                   corresponding
                                                                                                                   author
                Development of a shaft-mounted permanent              A. Nakahara, K. Takahashi, A.
                magnet generator for brushless excitation systems     Semba, F.Goto, K. Hattori, and
PMA1-1    572   of turbo-generators                                   M.Saeki                                     Japan
                Effect of the Presence of Magnetic Wedges on
                Saturated Self and Cross-Coupling Inductances of      R. Lateb, F. Meïbody-Tabar, N.
PMA1-2    580   Permanent Magnet Synchronous Motors                   Takorabet, J. Enon, A. Sarribouette         France
                Efficiency Comparison of In-wheel PM Motors for       M. Andriollo, G. Bettanini, A. Morini,
PMA1-3    590   Bus Propulsion                                        G. Martinelli, A. Tortella                   Italy
                Study on Optimal Design of Concentrated Winding
PMA1-4    591   IPMSM with Wide Speed Range                           S. I. Kim, J. H. Bhan, J. P. Hong            Korea
                Comparison of permanent magnet synchronous
                machines with distributed and concentrated
PMA1-5    609   windings                                              R. Nuscheler                               Germany
                Steady-State and Transient Performance Analysis
                for Line-Start Permanent-Magnet Synchronous
PMA1-6    615   Motors with Skewed Slots                              K. Kurihara, T. Monzen, and M. Hori         Japan
                Permanent Magnet 3 MW Low-Speed Generator
PMA1-7    629   Development                                           J. Pyrhönen and P. Kurronen                 Finland
                A Method for Time-Domain Analysis of Permanent-
                Magnet Brushless Motors Using Permeance
PMA1-8    683   Network Approach                                      L. Ovacik, S. Alkan, B. Kemence             Turkey
                Performance Evaluation of PM DC Commutator
PMA1-9    698   Motor Based on FE Analysis                            G. Cvetkovski and L. Petkovska              FYROM
                Vector Control of a Trapezoidal Back-EMF PMSM         A. Lidozzi, L. Solero, P. Kshirsagar
PMA1-10   725   Machine for High Speed Applications                   and D. Boroyevich                            Italy
                Performance comparison of IPMSM with distributed      Soon O Kwon, Sung Il Kim, Jung Pyo
PMA1-11   635   and concentrated windings                             Hong                                         Korea
                Reduction of the cogging torques of permanent-
                magnet excited motors with radial flux by the pole-   Marlene Marinescu, Nicolae
PMA1-12   636   shifting method                                       Marinescu, Wolfgang Wagner                 Germany
                Study and Optimisation of an Electrical Generator     M. Benseti, P. Dessante, P. Vidal,
PMA1-13   667   with Original Structure                               J.C. Vannier, C. Marchand                   France
                Influence of magnetic materials on maximum power      R. Missoum, N. Bernard, M.E Zaim,
PMA1-14   696   limits of permanent magnet synchronous machines       J. Bonnefous                                France
                Design Guidelines for the Optimisation of a           D. Andessner, W. Amrhein, M.
PMA1-15   703   Switched Permanent Magnet Motor                       Huber, G. Jungmayr                          Austria
                Optimal design based on 2D analytical model of        J. Azzouzi, N. Abdel Karim, G.
PMA1-16   706   axial flux permanent magnet synchronous machine       Barakat, B. Dakyo                           France
                Permanent Magnet Machines with Concentrated
PMA1-17   740   Windings                                              Ekkehard Bolte, Burghard Kipp              Germany
                Integrated Design Process and Experimental
                Verification of a 50 kW Interior Permanent Magnet     M. Aydin, M. K. Guven, Seok-Hee
PMA1-18   735   Synchronous Machine                                   Han and T. M. Jahns                          USA




                                                   15/34
                                    XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

14:30-15:40 POSTER (DIALOGUE) SESSION PMA2: DRIVES OF VARIABLE
  RELUCTANCE MACHINES AND PARTICULAR CONTROL TECHNIQUES
                  Monday, September 4th 2006

                                                                                                               Country of the
  No      Ref                     Paper title                                       Authors                    corresponding
                                                                                                                   author
                Mathematical Modeling and Numerical Simulation
                of the H2 Robust Controlled Stepping Motor-based
PMA2-1    332   Systems                                               Szász Csaba                                Romania
                Sensorless Direct Torque Control of Switched          Fuat Kucuk Hiroki Goto Hai-Jiao Guo
PMA2-2    582   Reluctance Motor Using Artificial Neural Networks     Osamu Ichinokura                            Japan
                A Novel Position Sensorless Drive of SR Motors        M. Mitani, H. Goto, H. J. Guo and O.
PMA2-3    583   Based on Direct Torque Control                        Ichinokura                                  Japan
                A Real-Time environment for industrial electrical
PMA2-4    538   drive control board testing                           G. Bucca, F.L. Mapelli,M. Mauri              Italy
                A Drive Circuit of Switched Reluctance Motors
PMA2-5    587   using Three-phase Power Modules                       H. Goto, H. J. Guo                          Japan
                A New Converter Topology for a Hybrid Brushless       E. Afjei, M.A. Saati and M.M.
PMA2-6    116   dc Motor without Permanent Magnet                     Nezamabadi                                    Iran
                Wide Speed Control of a Hybrid Excited                D. Fodorean, I.-A. Viorel, A. Djerdir,
PMA2-7    201   Synchronous Machine                                   A. Miraoui                                  France
PMA2-8    330   Human Brain Modeling of Motor Control                 Akshay S. Patwal                             India
                Variable Current Control of A Five Axis               M. N. Şahinkaya, A. E. Hartavi and
PMA2-9    401   Magnetically Levitated Turbomolecular Pump            R. N. Tuncay                                Turkey
                A vector controlled axial flux seven-phase machine    F. Locment, E.Semail and X.
PMA2-10   435   in default mode                                       Kestelyn                                    France
                Modeling resolvers for their application in high
PMA2-11   442   performance drives                                    J.-Ph. Conard, F. Labrique, P. Sente        Belgium
                Influence of the drive system on the performance of   H. Polinder, C.S.P. Tol, P.M.
PMA2-12   443   a magnetic levitated disk                             Overschie, J.W. Spronck                   Netherlands
PMA2-13   451   PM excited polyphase machine with low inertia         W.-R. Canders, M. R. Rezaei                Germany
                Mechatronics traction control design to improve
PMA2-14   495   comfort of a tyred electrical tramcar                 G. Bucca, F.L. Mapelli, M. Mauri             Italy
                An Efficient Kiln Drive System For The Cement         George A. Christopoulos and
PMA2-15   504   Industry                                              Athanasios N. Safacas                       Greece
                An Integrated Drive Circuit for Travelling Wave        Ch. Patsios, C. Efstathiou, E. C.
PMA2-16   275   Ultrasonic Motor                                      Tatakis, A. Tzes                            Greece
                Electrical Drive Assisted Mobility of Paraplegic       Harald Hofmann, Dieter Gerling,
PMA2-17   314   Patients                                              Johann Szecsi                              Germany
                On a Control System Design Using the Partial
PMA2-18   574   Model Model Maching of Controlled Processes           F.F.Shoji, N.Takazaki and H.H.Lee           Japan
                A Parallel-Connected Vector-Controlled Five-Phase
PMA2-19   729   Two-Motor Drive                                       M.Jones, E.Levi and S.N.Vukosavic             UK
                Simulation of common-bus drivers with use of          Krystyna Macek-Kaminska, Marcin
PMA2-21   732   Object Oriented Programming                           Kaminski                                    Poland




                                                    16/34
                                     XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

       14:30-15:40 POSTER (DIALOGUE) SESSION PMA3: INDUCTION
                                              MACHINES
                                        Monday, September 4th 2006

                                                                                                                  Country of the
  No      Ref                      Paper title                                         Authors                    corresponding
                                                                                                                      author
                Artificial Neural Network Based Identification of
PMA3-1    507   Nonlinear Model of Induction Machines                   R. Wamkeue, N. Kandil, D. Aguglia            Canada
                Thrust ripple reduction of linear induction motor by
PMA3-2    512   using additional inductances                            T. Utsumi and I. Yamaguchi                   Japan
                Modeling of Split-Phase Induction Machine using         P. Scavenius Anderson and D. G
PMA3-3    521   Rotating Field Theory                                   Dorrell                                        UK
                                                                        Cui Xueshen, Luo yingli, Liu
                A Novel Energy Saving Control Method of Motors          xiaofang, Zhang liancheng,
PMA3-4    523   Used for Multi-mode Gravity load                        Wangyilong                                    China
                Analysis of the three-phase induction motor with        Ramon Mujal-Rosas, Oriol Boix-
PMA3-5    527   spiral sheet rotor                                      Aragones                                      Spain
                Characteristics of End-effect Compensator using
PMA3-6    532   Magnet Rotator for Linear Induction Motor               N. Fujii and T. Yoshihara                    Japan
                Three-Phase Induction Motor Simulation Model
                Based on a Multifrequency Per-Phase Equivalent
                Circuit Considering Stator-Winding MMF Spatial          F. J. T. E. Ferreira, A. T. de Almeida,
PMA3-7    549   Harmonics and Thermal Parameters                        and G. Baoming                              Portugal
                Considerations on the Custom Design of the
                Stator-Winding of Low-Voltage, Three-Phase, Cage
                Induction Motors to Improve their Efficiency and        F. J. T. E. Ferreira and A. T. de
PMA3-8    550   Reliability                                             Almeida                                     Portugal
                Torsional Dynamics of Generator-Units During The
PMA3-9    552   Start-up of The Induction Motor                         M. Mirosevic, Z. Maljkovic                   Croatia
                Notes About Inductances Calculation of Induction
PMA3-10   565   Motor Under Radial And Axial Air-gap Eccentricity       A. Ghoggal , S.E. Zouzou                     Algeria
                Improving Three-Phase Induction Motor Efficiency
PMA3-11   586   by the Optimized Design With Copper Rotor Cage          P-W. Han, Y-D.Chun, D-H. Koo                  Korea
                Finite – Element techniques enhancing the
                traditional analytical induction motor design
PMA3-12   618   procedure                                               M. Centner, R. Hanitsch                     Germany
                Study on the Bearing Currents Activity in Cage          F. J. T. E. Ferreira , P. Pereirinha
PMA3-13   620   Induction Motors using Finite-Element Method            and A. T de Almeida                         Portugal
                Modelling of a Squirrel-cage Linear Induction Motor     Ana Julia Escalada, Javier Poza,
PMA3-14   627   by Space Harmonics                                      Sergio Luri, Antonio González                 Spain
                Reduction of Harmincs of Single Phase Induction
                Motors with a Small Power Range by Specified
PMA3-15   631   Design Steps                                            J. P. Bacher, HJ. Köfler                     Austria
                Frequential modelling of induction machine in view
PMA3-16   672   of phase currents simulation                            M. Belhaj, P. Guérin, M.E. Zaim              France
                Analysis of rotor slot harmonics rotation in squirrel    M.Y. Kaikaa, A. Khezzar, M.
PMA3-17   677   cage induction machines                                 Boucherma and M.E.K. Oumaamar                Algeria
                An Analytical Analysis for Self-Excited Induction       L. Louze, A. Khezzar and M.
PMA3-18   678   Generator                                               Boucherma                                    Algeria
                Full-Load and Half-Load Efficiency as
                Characteristics of Energy Efficiency Induction
PMA3-19   717   Motors at all Loads                                     M. Kostic                                    Serbia




                                                      17/34
                                    XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

 14:30-15:40 POSTER (DIALOGUE) SESSION PMA4: DC MACHINES AND
                                            ACTUATORS
                                       Monday, September 4th 2006

                                                                                                             Country of the
  No      Ref                     Paper title                                       Authors                  corresponding
                                                                                                                 author
                Study of dynamic regimes at direct current motors
PMA4-1    231   by numerical methods                                  I. Vlad, A. Campeanu, S. Enache          Romania
                Estimation of the electrical and mechanical
                parameters of a permanent magnet dc motor model       Roland R. Seebacher, Guenther
                taking into account the oscillations of the induced   Dannerer, Klaus Krischan, Georg
PMA4-2    602   voltage                                               Ofner                                     Austria
                Spectral Analysis of Signals of Commutator DC
PMA4-3    656   Motor                                                 Z. Głowacz and A. Zdrojewski              Poland
                Computer Simulation of Actuators Working on                                                     Czech
PMA4-4    272   Principle of Thermoelasticity                         I. Dolezel, M. Mach, B. Ulrych           Republic
                PM Tube machine designed for a controlled vehicle
                shock-absorber suited for energy recuperative         Istvan Zador, Daniel Horvath, Istvan
PMA4-5    402   operation                                             Vajda                                    Hungary
                StackedType Electrostatic Actuator with Squared       Kazuo Okuda, Yoshiyuki Hata and
PMA4-6    416   Thick Electrodes                                      Keiji Saneyoshi                           Japan
                Promoting the Virtual Work Principle as the
                General Way to Compute a Magnetic Force:              D. Ladas, V. Mazauric and P.
PMA4-7    472   Application to Voice-coil Type Actuators              Pruvost                                   France
                Two cogging force minimization applied to a linear    G.Krebs, A.Tounzi, B.Pauwels,
PMA4-8    480   actuator                                              D.Willemot, F.Piriou                      France
                Integrated Electromagnetic-Thermal-Mechanical         D.Casadei, F. Milanesi, G. Serra, A.
PMA4-9    490   Design of Tubular Permanent Magnet Actuators          Tani, L.Zarri                              Italy
                Electromagnetic Valve Controlled Internal
                Combustion Engines: a Comparison Between Two          H. Aloui, M. Gabsi,H. Ben Ahmed
PMA4-10   522   Major Topologies                                      and M. Lecrivain                          France
                Smart BLDC actuator with an integrated
PMA4-11   612   mechanical clutch                                     J. Tbatou, D. Prudham, L. Billet          France
                A multi-air-gaps linear electric actuator design
PMA4-12   641   using finite elements methods                         N. Ziegler, D.Matt, J.Jac ,P. Enrici      France
                Selection of the Soft Magnetic Materials for a High   A. Lebedev, E. Lomonova, D. Laro,
PMA4-13   642   Precision Positioning System Design                   A. Vandenput                            Netherlands
                Passive and Active Constant Force-Displacement        L. Encica, J. Paulides, E. Lomonova,
PMA4-14   645   Characteristics of a Long-Stroke Linear Actuator      A. Vandenpu                             Netherlands
                Design and optimization of a clutch magnet            V. Pauvert, N. Bernard, M.E. Zaοm,
PMA4-15   697   actuator                                              J. Bonnefous                              France
                Torque Analysis of Various Microshutter Actuators     Hong-Joo Lee, Sang-Moon Hwang
PMA4-16   658   Using Virtual Work Principle                          and Tae-Soon Kim                           Korea
                Development of microspeaker with a linear air gap     Sang-Moon Hwang , Joong-Hak
PMA4-17   659   in mobile phones                                      Kwon and Yong-Chang Yang                   Korea




   14:30-15:40 POSTER (DIALOGUE) SESSION PMA5: MATERIALS AND
                                               LOSSES
                                       Monday, September 4th 2006

                                                                                                             Country of the
  No      Ref                     Paper title                                       Authors                  corresponding
                                                                                                                 author
                Adjustable-Angle Triangular Lossy DNG Slabs with      D. L. Sounas, N. V. Kantartzis, and
PMA5-1    378   Enhanced Focusing Capabilities                        T. D. Tsiboukis                           Greece
                Effect of Machining on the Properties of Resin-       M. R. Dubois, P. Lemieux, D.
PMA5-2    411   Based Soft Magnetic Composites                        Massicotte                                Canada
                                                                      C. da Silva, Z. Makni, M. Besbes, C.
                Eddy Current Losses and Demagnetization in            Marchand, Adel Razek and Renato
PMA5-3    417   Permanent Magnets                                     Carlson                                    Brazil
                Optimization Material Distribution in Ferromagnetic   P. Boissoles, H. Ben Ahmed, M.
PMA5-4    730   Electromagnet                                         Pierre, B. Multon                         France
                Variation of Magnetic Flux Density with Distance
                from the Cut Edge of Grain Oriented Electrical
PMA5-5    741   Steel                                                 G. Loizos, A. J. Moses                    Greece
                                                    18/34
                                     XVII International Conference on Electrical Machines
                                Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                               Web-site: http://www.ntua.gr/ICEM2006/

                Investigation of thermal ageing process of NdFeB
PMA5-6    334   magnets                                                Istvan Meszaros                             Hungary
                                                                       E. J. Meurer, N. J. Batistela, R.
                Interlaminar Losses Evaluation in Electrical           Carlson, N. Sadowski, L. Von
PMA5-7    259   Machines Stators                                       Dokonal, A. A. de Espindola                   Brazil
                Additional Eddy Current Losses in the Stator
                Clamping System of Large Hydro Generators              Erich Schmidt, Georg Traxler-Samek,
PMA5-8    271   caused by the Third Harmonic of the Airgap Field       Alexander Schwery                            Austria
                Calculation of losses in retaining sleeves of high
                speed permanent magnet brushless machines:
                simple analytical approach versus finite element       Dan M. Saban, Jacek F. Gieras, and
PMA5-9    297   method                                                 Thomas A. Lipo                                USA
                                                                       H. Mogi, C. Kaido, S. Kanao,
                                                                       Y.Mishima, K. Yamazaki, Y.
                                                                       Watanabe A. Nakahara, K.
                Influence of Perpendicular Flux in Laminated Core      Takahashi, K. Ide, K. Hattori, and T.
PMA5-10   302   and Core Losses                                        Watanabe                                     Japan
                Iron losses distribution in a railway traction         A. Fasquelle, A. Ansel, S. Brisset, P.
PMA5-11   500   induction motor                                        Brochet, A. Randria                          France
                Circulating Currents in the Parallel Stator
PMA5-12   548   Conductors of Electrical Machines                      M. J. Islam, A. Arkkio                       Finland
                Modeling the eddy currents in conducting sleeves
PMA5-13   556   by an analytical field calculation method              M. Leroy, C. Henaux , B. Nogarede            France
                Polarization Effect on Iron Losses in Induction        L. T. Ergene, S. J. Salon, R.C.
PMA5-14   569   Motors                                                 Degeneff,                                    Turkey
                Influence of the values of the coefficients in
                Bertotti’s statistical expression on the loss figure   P. Arboleya, G. Díaz, C. González-
PMA5-15   623   computation in induction motors                        Morán, J. Gómez-Aleixandre                    Spain




15:40-16:00 Coffee Break


  16:00-17:40 ORAL SESSION OMA1: MONITORING AND DIAGNOSTICS
                                         Monday, September 4th 2006
                                                     Athina1 Room


                                                                                                                 Country of the
  No      Ref                       Paper title                                      Authors                     corresponding
                                                                                                                     author
                                                                       A.Yazidi, G.A. Capolino, A. Bellini, F.
                Accurate Monitoring of Rotor Modulating Signals        Filippetti, C. Rossi, A. Stefani, D.
OMA1-1    671   for Doubly-Fed Induction Machines Fault Diagnosis      Casadei                                      France
                New multipole decomposition method for the             O-Mun Kwon, Sheppard J. Salon,
OMA1-2    553   measured magnetic signal                               M.V.K. Chari, and Jerry P. Selvaggi           USA
                Multi-Slice FE Modelling of Induction Motors
                havinga Broken Bar–Influence of Inter-Bar Currents     J. Gyselinck and X.M. Lopez-
OMA1-3    253   and Bar Breakage Location                              Fernandez                                    Belgium
                                                                       A. Bellini, C. Concari, G.
                Test bed for virtual inertia variation to induction    Franceschini, E. Lorenzani, D.
OMA1-4    478   machines diagnostic aims                               Schiavi, C. Tassoni, A. Toscani               Italy
                Fault detection in the subsynchronous cascade
                drive via time and frequency analysis of the rotor
OMA1-5    655   current space vector                                   I. Tsoumas, A. Safacas                       Greece




                                                      19/34
                                  XVII International Conference on Electrical Machines
                             Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                            Web-site: http://www.ntua.gr/ICEM2006/

16:00-17:40 ORAL SESSION OMA2: DRIVES OF VARIABLE RELUCTANCE
                                           MACHINES
                                     Monday, September 4th 2006
                                                 Athina2 Room


                                                                                                          Country of the
 No      Ref                     Paper title                                     Authors                  corresponding
                                                                                                              author
               Calculation of the Optimal Fire Angles in Single-
               Pulse Controlled Switched Reluctance Generator       Christos Mademlis and Iordanis
OMA2-1   161   Drives                                               Kioskeridis                              Greece
               Evaluation of Switched Reluctance Motor Drives for
OMA2-2   167   Wide Speed Range Drive Applications                  Cuneyt Karacan, H. Bülent Ertan          Turkey
               A Novel Suggestion of High Efficency Servo Drive
               Method for The Stepping Motor By The Sensorless
OMA2-3   493   Control                                              M. Yoneda , H.Dohmeki                    Japan
               Sensorless Vector Control Parameters Estimation      Hong Seok Kim, Jung Ho Lee, Jung
               of Synchronous Reluctance Motor Using a Coupled      Min Park, Min Myung Lee and Jang-
OMA2-4   541   FEM & Preisach Model                                 Sung Chun                                 Korea
               Speed Control of Axial Laminations Switched
               Reluctance Motor Provided with Digital Pole          H.M.Hasanien, N.H. Saad, M.A.
OMA2-5   743   Placement Controller                                 Mostfa and M.A.Badr                       Egypt




 16:00-17:40 ORAL SESSION OMA3: ELECTRIC VEHICLES AND POWER
                                         ELECTRONICS
                                     Monday, September 4th 2006
                                                 Athina3 Room


                                                                                                          Country of the
 No      Ref                     Paper title                                     Authors                  corresponding
                                                                                                              author
               Traction Drive Technology at Voith - Design
OMA3-1   273   Aspects and Solutions                                Andreas Lange                           Germany
               Development of Multi-layer Buried Permanent          Sang-Yeop Kwak, Jae-Kwang Kim,
               Magnet Synchronous Machine for Vehicle               Sang-Yong Jung, Cheol-Gyun Lee
OMA3-2   592   Application                                          and Hyun-Kyo Jung                         Korea
               Global Optimal Design of a Traction Motor by a
OMA3-3   613   Systemic Approach of the Electric Drive Train        V. Mester, F. Gillon and P. Brochet      France
               A Three-Level Shunt Active Power Filter Controlled
OMA3-4   355   with the Space Vector Pulse Width Modulation         H. Djeghloud, H. Benalla                 Algeria
               Analysis and Minimization of Output Current Ripple
OMA3-5   670   of Five Phase PWM Inverters                          Pekik Argo Dahono                       Indonesia




                                                  20/34
                                   XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

   16:00-17:40 ORAL SESSION OMA4: DC MACHINES AND ACTUATORS
                                       Monday, September 4th 2006
                                                 Ariadne Room


                                                                                                          Country of the
  No      Ref                     Paper title                                   Authors                   corresponding
                                                                                                              author
                                                                   J. Cros, N. Fontaines, V. Masson, J.
OMA4-1    528    Brush DC motor simulation with Cassie arc model   Jeuvrey, J. Figueroa, P. Viarouge         Canada
                 Development of Fish Robot Using Stacked-type
OMA4-2    405    Electrostatic Actuators                           Y.Hata, K.Saneyoshi, K. Okuda             Japan
                 From Electromagnetic Modeling to Life Cycle
                 Assessment: A Complete Framework for Actuator
OMA4-3    471    Designing                                         D. Ladas and V. Mazauric                  France
                 Optimal Design of a Linear Permanent Magnet
                 Actuator for Active Roll Control in Automotive    L. Encica, J. Paulides, E. Lomonova,
OMA4-4    632    Applications                                      A. Vandenput                            Netherlands
                 A Power Line Communication Approach for           E. Arabia, A. Consoli, C. Ciofi, R.
OMA4-5    646    Automotive Electromechanical Actuators            Merlino, A. Testa                          Italy




19:30 Departure from Minoa Palace Hotel for the Official Dinner




                                                  21/34
                                    XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

Tuesday, September 5th 2006

09:00-10:00 : PLENARY ORAL SESSION OSK3 (Athina1 Room)
 Keynote presentation by J. Donoso, (Gamesa) Spain, on description of activities of the
company and on “Recent advances on generators for wind-turbines”

10:00-10:20 Coffee Break

10:20-11:30 POSTER (DIALOGUE) SESSION PTM1: POWER GENERATION
                                      BY RENEWABLE SOURCES
                                       Tuesday, September 5th 2006
                                                                                                              Country of the
  No      Ref                      Paper title                                       Authors                  corresponding
                                                                                                                  author
                An electrical machine approach to power flow
PTM1-1    164   control in power systems with wind integrations        Marta Molinas, Tore Undeland              Norway
PTM1-2    168   A Stochastic Model for Isolated Eolian Installations   J. Fouladgar                              France
                Design Aspects and Performance Simulations of
PTM1-3    173   Wind Turbine Generators                                X. Feng, G. Rupertus and H. Chen           USA
                                                                       S.M. Muyeen, Mohammad Abdul
                                                                       Mannan, Mohammad Hasan Ali, Rion
                Application of Fuzzy Logic Control based Statcom       Takahashi, Toshiaki Murata and Junji
PTM1-4    198   to stabilize Wind Turbine Generator System             Tamura                                    Japan
                Integration of Wind Energy in Competitive              S. N. Singh and Demetrios P.
PTM1-5    227   Electricity Markets                                    Papadopoulos                               India
                Steady State Equivalent Model of PM Generators
                Feeding Capacitor Loaded Diode Bridges, for            A. Di Gerlando, G. M. Foglia, R.
PTM1-6    242   Wind Energy Generation                                 Perini, M. Ubaldini                        Italy
                The State of the Art of Generators for Wind Energy     Y. Amirat, M.E.H. Benbouzid, B.
PTM1-7    243   Conversion Systems                                     Bensaker and H. Mangel                    France
                Wind Generator Stabilization by PWM Voltage            Mohd. Hasan Ali, Toshiaki Murata,
PTM1-8    248   Source Converter and Chopper controlled SMES           and Junji Tamura                          Japan
                A Study of Cooperative Operation of Flywheel
                Generator and Hydrogen Electrolyzer with Wind          Masaaki Nobuta, Rion Takahashi,
PTM1-9    316   Generator                                              Toshiaki Murata, Junji Tamura             Japan
                                                                       Hideyuki Nakabayashi, Rion
                Fundamental Research of Hydrogen Production            Takahashi, Toshiaki Murata, Junji
PTM1-10   317   System Using Variable Speed Wind Generator             Tamura                                    Japan
                Dynamic Contribution Of DFIG Based Wind Plants
PTM1-11   328   To System Frequency Disturbances                       M. Kayıkçı, J.V. Milanović                  UK
                Smoothing of the wind power production by a
                geographical spreading of the wind farm:
                application to asynchronous doubly-fed wind
PTM1-12   349   generators                                             F. Vallée, J. Lobry and O. Deblecker     Belgium
PTM1-13   396   Sources of harmonics in wind farms                     Y. Plotkin, D. Schulz, R. Hanitsch       Germany
                Simulation Analysis of 2 MW Doubly Fed Induction
                Generator Wind Turbine with Active Crowbar under
PTM1-14   366   Network Disturbance                                    S. Seman, J. Niiranen, and A. Arkkio      Finland
                                                                       Joung-Min Lim, Sang-Hun Lee,
                A Grid-connected Photovolatic System using             Sung-Jun Park, Chae-Joo Moon,
PTM1-15   375   Current-Source Inverter                                Man-Hyung Lee                              Korea
                Influence of distributed generators on the harmonic    A. Dagoumas, A. Marinopoulos, F.
PTM1-16   403   level of a 20 kV distribution network                  Kinis, C. Demoulias, P. Dokopoulos        Greece
                Impacts of Distributed Generators on the Inrush        M.B.B. Sharifian, A. Yazdanpanah
PTM1-17   448   Transient of Distribution Power Transformers           Ghoharrizy                                  Iran
                Optimal Matching Between a Permanent Magnet
                Synchronous Machine and a Wind Turbine –
PTM1-18   649   Statistical Approach                                   D. Morales, M. López, J-C. Vannier        France
                                                                       A. G. Soldatos, S. A.
                Robust Nonlinear Control for Vibration Attenuation     Papathanassiou, M. P.
PTM1-19   723   in Variable Speed Wind Turbines                        Papadopoulos and A. G. Kladas             Greece
                Simple control schemes for grid-connected three-
PTM1-20   737   phase voltage-source inverters of DG units             F. Gakis, S.Papathanassiou                Greece


                                                    22/34
                                     XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

         10:20-11:30 POSTER (DIALOGUE) SESSION PTM2: DRIVES OF
                        SYNCHRONOUS, PM AND DC MACHINES
                             Tuesday, September 5th 2006

                                                                                                                 Country of the
  No       Ref                     Paper title                                       Authors                     corresponding
                                                                                                                     author
                 Operational Behaviour of Industrial DC Drives in
                 Paper Machines in Relation to Elastic Shafts
PTM2-1     526   Characteristics                                       C. Michael, A. Safacas                       Greece
                 Accurate Torque Control of VSI Fed Synchronous
                 Machine Under Normal or Fault Conditions Using        M. Bekemans, F. Labrique, E.
PTM2-3     344   Discrete Modelling of Airgap Flux                     Matagne                                      Belgium
                 Brushless, Self-Excited Synchronous Field-Winding
PTM2-4     702   Machine for Variable-Speed Drive Applications         Alexander Rovnan, Heath Hofmann               USA
                 The New Methodology Of The Power Loss                 Z. Gmyrek, A. Boglietti, A.
PTM2-5     128   Calculation Under Deformed Flux Conditions            Cavagnino                                    Poland
                 AC High Dynamometer for testing motor drive           Gildong Kim, Hanmin Lee, Sehchan
PTM2-6     415   system                                                Oh, Sunghyuk Park                             Korea
                 Fast Prototyping of Vector Controllers for Interior
PTM2-7     341   PM Synchronous Motors                                 M. Tursini, A. Scotti                         Italy
                 Current Waveform Analysis of PWM Inverter-Fed
                 Permanent Magnet Synchronous Machine
PTM2-8     379   Accounting for Cross-Magnetization                    M. Kimura, K. Ide, H. Mikami                 Japan
                 Sensorless Control of PM Synchronous Motors with
                 Luenberger Observer: Theoretical Issues and
PTM2-9     342   Implementation Results                                M. Tursini, A. Scafati, R. Petrella           Italy
                 Speed Control of Permanent Magnet Synchronous         P. Fernandez, J. A. Goemes and A.
PTM2-10    460   Motors by Current Vector Control                      M. Iraolagoitia                               Spain
                 Line-Start Permanent-Magnet Chemical Pump
PTM2-11    626   Drives                                                A.C.Smith and E.Peralta Sanchez                UK
                 Versatile High Torque Direct Drive with PM-           W.-R. Canders, H. Mosebach, M. R.
PTM2-12    237   Excitation and Duplex Stator Arrangement              Rezaei                                      Germany
                 A Novel Drive Strategy for Vibration Suppression in   Tao. Sun, Gen-Ho Lee, Jeng-Pyo
PTM2-13    257   Permanent Magnet Brushless DC Motor                   Hong                                          Korea
                 Implementation of an active converter for high
PTM2-14    129   quality dc drive performance                          N.N. Barsoum, S.K. Wong                     Malaysia
                 Controlled DC Electric Drive Based on Stochastic
PTM2-15    155   Calculation Techniques                                Achmad Alyan and Raul Rabinovici              Israel
                 Determination of the Optimum Power Factor and
                 Efficiency of a Characteristic DC Drive System via    K. Georgakas, A. Safacas, I.
PTM2-16    307   Simulation                                            Georgakopoulos                               Greece
                 Optimal Integral State Feedback controller for a DC   H. Delavari, GH. Alizadh,
PTM2-17    440   motor                                                 M.Sharifian,                                   Iran
                 Simplified sensorless control technique for wound     F. Chabour, J. P. Vilain, P. Macret, P.
PTM2-18    255   rotor synchronous motor                               Masson, L. Kobylansky                        France




                                                    23/34
                                    XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

10:20-11:30 POSTER (DIALOGUE) SESSION PTM3: TRANSFORMERS AND
                                             INDUCTORS
                                       Tuesday, September 5th 2006

                                                                                                                Country of the
  No      Ref                     Paper title                                       Authors                     corresponding
                                                                                                                    author
                Design and Built of on - Load Fully Electronic Tap-
                Changer with Triac Switch: Simulation and             M. Ardebili, K. Abbaszadeh, A.R.
PTM3-1    170   Practical Results                                     Alaei                                          Iran
                Core Effects Modeling For Three Phase                 Jorge Pleite, Carlos Gonzalez, Juan
PTM3-2    209   PowerTransformers                                     Vazquez, Antonio Lazaro                       Spain
                Finite Element Calculation of Winding type Effect
                on Leakage Flux and Electromagnetic Forces in         M.B.B. Sharifian, J. Faiz, M.
PTM3-3    291   Distribution Transformers                             Ghadimi, G. Ahrabian                          Iran
PTM3-4    325   Stray Losses in Transformer Clamping Plate            Z. Janic, Z. Valkovic, Z. Stih               Croatia
                                                                      M.Z.Fortes, H.P. Amorim Junior,
                                                                      A.C.Dominguetti Junior and
PTM3-5    407   Fuzzy Logic for Diagnostic in Power Transformers      R.M.Abrota                                    Brazil
                Reduction of Winding Leakage Flux and
                Electromagnetic Forces in Single Phase Shell Type     A.M. Kashtiban, M.B.B Sharifian, A.
PTM3-6    431   Transformers Using Genetic Algorithms                 Vahedi                                         Iran
                Methodology for the Optimum Design of Power
                Transformers using minimum number of input            Eleftherios I. Amoiralis, Erion Litsos,
PTM3-7    470   parameters                                            and Pavlos S. Georgilakis                    Greece
                                                                      AnastasiaJ. Tsivgouli, Marina A. Tsili,
                Finite Element Based Methodology for the Accurate     Pavlos S. Georgilakis, Antonios G.
                Prediction and Minimization of No Load Loss in        Kladas, A. T. Souflaris and D. G.
PTM3-8    510   Power Transformers                                    Paparigas                                    Greece
                A Detailed Single-Phase Core-Type Transformer
                Model Based on Jiles-Atherton Theory of               A. D. Theocharis, J. Milias-Argitis,
PTM3-9    596   Ferromagnetic Hysteresis                              Th. Zacharias                                Greece
                Executable Heterogeneous Model of an Adaptive
                Fuzzy Logic Controller and Switchable Engergy
PTM3-10   599   Efficient Distribution Transformer                    R. Kiefer and Sam Ali                       Australia
                Exposure to magnetic fields in the vicinity of
PTM3-11   643   transformers                                          E. Mimos D. Tsanakas A. Tzinevrakis          Greece
                An Analytic Method for Optimal Location of Internal   R.C.Degeneff , S. J. Salon , L.T.
PTM3-12   663   Shield within A Disk Winding                          Ergene                                        USA
PTM3-13   708   Variable Frequency Transformer Concept                Arezki Merkhouf                              Canada
                Zero-sequence flux protection of a three-limb core
PTM3-14   714   power transformer                                     M.A.Tsili, S.A.Papathanassiou                Greece
                A General Method for Including Core Losses in a       R.C.Degeneff , S. J. Salon , N.
PTM3-15   664   Lumped Parameter Transformer Models                   Yaghi, L.T. Ergene                            USA
                A New Method for Estimation of Loss of Life of
PTM3-16   715   Power Transformer Supplying Nonlinear Loads           Ali Farshidnia                                 Iran
                Design of Permanet Magnet Compact Inductor for        A. Belahcen, P. Pieteris, P.
PTM3-17   148   Frequency Converter                                   Virolainen                                   Finland
                Application of pattern recognition method to the
PTM3-18   219   diagnosis in induction machine                        O. Ondel, E. Boutleux, G. Clerc              France
                                                                      C.L.W. Sonntag, E.A. Lomonova, J.L.
                Contactless Energy Transfer for Office and            Duarte, A.J.A. Vandenput, and
PTM3-19   268   Domestic Applications                                 A.J.M. Pemen                               Netherlands
                Three-dimensional Reluctance Network Analysis of      K. Nakamura, T. Tomonaga, S.
                an EIE-Core Variable Inductor and Application to      Akatsuka, T. Ohinata, Y. Sato, and
PTM3-20   310   Automatic Voltage Regulator                           O. Ichinokura                                Japan
                Design and study of a saturated DC reactor fault
PTM3-21   603   current limiter (FCL)                                 M. Abapour, M.T. Haque                         Iran
                An Optimized Design of Solenoids in an Intake         Long Wu, Aristidis Zachas, Ronald
PTM3-22   690   Valve Train System                                    G. Harley, and J. Rhett Mayor                 USA




                                                    24/34
                                    XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

10:20-11:30 POSTER (DIALOGUE) SESSION PTM4: ELECTRIC VEHICLES
                                    AND POWER ELECTRONICS
                                     Tuesday, September 5th 2006

                                                                                                              Country of the
  No      Ref                      Paper title                                     Authors                    corresponding
                                                                                                                  author
                Mathematical Model of the Electric Vehicle
PTM4-1    101   Autonomy                                             S. Tounsi, R. Neji and F. Sellami           Tunisia
                Design of Permanent Magnet Synchronous
PTM4-2    147   Machine for Electrical Vehicle                       A. Belahcen, J. Perho, S-Y Jung             Finland
                Integration of an Induction Machine Synthesis in a
                Multiphysic Simulation tool for Automotive           J. Legranger, G. Friedrich, R. Trigui,
PTM4-3    319   Applications                                         F. Badin                                    France
                Comparing the Conventional Control Method and
                the Fuzzy Control Method in Hybrid Fuel cell
PTM4-4    336   Electric Vehicle                                     M. Amirabadi, Sh. Farhangi                    Iran
                A Self-Reconfigurable and Fault-Tolerant Induction
                Motor Control Architecture for Hybrid Electric       M. Zeraoulia, M.E.H. Benbouzid and
PTM4-5    350   Vehicles                                             D. Diallo                                   France
                Sliding Mode Control of EV Electric Differential     A. Haddoun, M.E.H. Benbouzid, R.
PTM4-6    400   System                                               Abdessemed, J. Ghouili and K. Srairi        France
                Analysis of Voltage Unbalance on Korean Railway      Hanmin Lee, Gildong Kim, Sehchan
PTM4-7    414   System                                               Oh, Sunghyuk Park                            Korea
                Comparison of the Field Oriented and Direct
                Torque Control Methods for Induction Motors used     A.D. Karlis, K. Kiriakopoulos, D.P.
PTM4-8    476   in Electric Vehicles                                 Papadopoulos and E.L. Bibeau                Greece
                Voltage and Current Disturbance Elimination with
                Reactive Power Compensation Using Unified            T. Benslimane, K. Aliouane, B.
PTM4-9    104   Power Quality Conditioner                            Chetate                                     Algeria
                Design of Fixed-Gain PID Controller for Use with a   John Ch. Dermentzoglou, Demetrios
PTM4-10   107   Static Var Compensator                               P. Papadopoulos                             Greece
                Off-Line Fuzzy Compensation Technique Applied
                on the Load Characteristics of a DC to DC            Ahmed Massoud, Mahmoud Masoud,
PTM4-11   162   Converter Using Microcontroller                      and Mohamed El-Hawary                        Egypt
                                                                     Sung Geun Song, Sung Jun Park,
                The operating system of high-power LED module        Hae kon Nam, Chae Ju Moon, Ji
PTM4-12   377   with Back-Boost mode                                 Hyun Chung                                   Korea
                DC Offset at PWM-Inverter Output due to
                Tolerances of the Optical Link Junction for IGBT-    Y. Plotkin, M. Centner, D. Schulz, R.
PTM4-13   395   Control Signals                                      Hanitsch                                   Germany
                Analysis and design of a current fed resonant
                converter applied to high-frequency magnetic cores   G. Tselos, G. Dimitrakakis, E.C.
PTM4-14   420   measurements                                         Tatakis                                     Greece
                Modeling of synchronous motor fed load-
                commutated converter considering the sub-
PTM4-15   543   transient quantities                                 V. Manoliu                                 Romania
                Design Solutions for High Current Fast Switching
                Power Stage with Paralleled MOSFETs for Dual         R. Nalepa, J. Muckian, H. Levy, M.
PTM4-16   560   Axes PMSM Drives                                     Kearney                                     Ireland
                Active Harmonic Filter Behaviour in a Twelve-Pulse   Adérito N. Alcaso, A. J. Marques
PTM4-17   568   Front-End Rectifier Under Faulty Conditions          Cardoso                                    Portugal
                Current THD Improvement using predictive control
                of 3-level PWM Rectifier in DTC high power
PTM4-19   625   Induction Motor Drives using 3-level Inverters       G. Brando, A. Dannier, A. Del Pizzo          Italy
                Requirements and Implementation of an AC-to-DC
PTM4-20   644   Power Converter for Micro Wind Turbine               O-P.Laitinen T.Lindh J.Ahola                Finland
                Analysis and Minimization of Output Current Ripple
PTM4-21   670   of Five Phase PWM Inverters                          Pekik Argo Dahono                          Indonesia
                On Power Factor Correction considering Energy
                losses, in Medium Size Industrial Plants with Non
PTM4-22   721   Linear Loads                                         P. Vallianatos, N. Tasios, S.Manias         Greece
                Converter for Switched Reluctance Generator With
                Variable DC-Link Voltage for High Speed              Lipták, M., Rafajdus, P., Hrabovcová,
PTM4-23   724   Applications                                         V                                          Slovakia




                                                    25/34
                                     XVII International Conference on Electrical Machines
                                Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                               Web-site: http://www.ntua.gr/ICEM2006/

         11:40-13:20 ORAL SESSION OTM1: POWER GENERATION BY
                                         RENEWABLE SOURCES
                                        Tuesday, September 5th 2006
                                                    Athina1 Room


                                                                                                              Country of the
 No        Ref                      Paper title                                     Authors                   corresponding
                                                                                                                  author
                 Detection of winding faults in windmill generators    Zacharias Getsis, Michalis Zervakis
OTM1-1     152   using the Wavelet Transform Analysis method           and George Stavrakakis                    Greece
                 Comparison of generator topologies for direct-drive   A.S. McDonald, M.A. Mueller and H.
OTM1-2     360   wind turbines including structural mass               Polinder                                    UK
                 Analysis of A Novel Transverse Flux Generator in      D. Svechkarenko, J. Soulard, and C.
OTM1-3     424   Direct-driven Wind Turbines                           Sadarangani                              Sweeden
                 Design criteria and analysis of a 75 kW brushless
                 doubly-fed asynchronous generator prototype for       R. Carlson, F. Runcos, H. Voltolini,
OTM1-4     499   wind power systems                                    P. Kuo-Peng, N. J. Batistela               Brazil
                 Generic Model and Control Modes for a Full-           G. Tsourakis, E. Farantatos, and C.
OTM1-5     733   Converter Synchronous Wind Generator                  D. Vournas                                Greece




         11:40-13:20 ORAL SESSION OTM2: DRIVES OF SYNCHRONOUS
                                               MACHINES
                                        Tuesday, September 5th 2006
                                                    Athina2 Room


                                                                                                              Country of the
 No        Ref                      Paper title                                     Authors                   corresponding
                                                                                                                  author
                 Comparison of Synchronous PM Machine Types
                 for Wide Constant-Power Speed Range Operation:        Ayman M. EL-Refaie, Thomas M.
OTM2-1     339   Converter Performance                                 Jahns                                      USA
                 Fault Detection and Isolation based PI Controllers
                 On-Line Tuning for Permanent Magnet
OTM2-2     153   Synchronous Machines                                  E. Altamiranda, E. S. Hamdi               Sweden
                 Inductance Harmonics in Permanent Magnet
                 Synchronous Motors and Reduction of Their
OTM2-3     138   Effects in Sensorless Control                         A. Piippo and J. Luomi                    Finland
                 Interactive Modeling and Simulation of a six step
                 continuous current mode Inverter fed Permanent        Narayanaswamy. P.R. Iyer, Jianguo
OTM2-4     491   Magnet Synchronous Motor Drive using Simulink         Zhu                                      Australia
                                                                       Frederik M.L.L. De Belie, Thomas J.
                 On the Influence of Saturation and Mutual Coupling    Vyncke, Jan A.A. Melkebeek, Kristof
                 of both Orthogonal Magnetic Axes on a MTPA            R. Geldhof, Lieven Vandevelde and
OTM2-5     524   Controlled Interior PMSM Drive                        Ren´e K. Boel                             Belgium




                                                     26/34
                                    XVII International Conference on Electrical Machines
                              Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                             Web-site: http://www.ntua.gr/ICEM2006/

            11:40-13:20 ORAL SESSION OTM3: TRANSFORMERS
                                       Tuesday, September 5th 2006
                                                  Athina3 Room


                                                                                                                Country of the
  No      Ref                     Paper title                                       Authors                     corresponding
                                                                                                                    author
                A Novel Approach to Reducing Inrush Current in
OTM3-1    281   Power Transformer                                     M.B.B. Sharifian, M. Abapour                   Iran
                Assessment of ELF- Magnetic Field Exposure in
OTM3-2    210   Power Transformer Rooms                               Carlos F. R. Lemos Antunes                  Portugal
                Core Effects Modeling For Three Phase                 Jorge Pleite, Carlos Gonzalez, Juan
OTM3-3    209   PowerTransformers                                     Vazquez, Antonio Lazaro                       Spain
                Time Domain Analysis of Power Transformers by a        T. I. Kosmanis, T. V. Yioultsis and T.
OTM3-4    370   Hybrid Quasi-Static FD – FE Technique                 D. Tsiboukis                                 Greece
                Characteristics of Transformer using Wound Type
OTM3-5    533   of Linear Induction Motor                             N. Fujii, K. Hayashi and T. Mizuma           Japan




       11:40-13:20 ORAL SESSION OTM4: TESTING, MEASUREMENTS,
                   ACOUSTIC NOISE AND VIBRATION ASPECTS
                          Tuesday, September 5th 2006
                                                  Ariadne Room


                                                                                                                Country of the
  No      Ref                     Paper title                                       Authors                     corresponding
                                                                                                                    author
                                                                      Voicu Groza, Marius Biriescu,
                Testing of Electric Machines with a Dedicated         Vladimir Creţu, Gheorghe Liuba,
OTM4-1    320   System for Data Acquisition and Processing            Marţian Moţ , Gheorghe Madescu              Romania
                The increase of the magnetic noise of induction
                motors due to the low order excitation modes          S.L. Nau, R. Beck, H.L.V. dos
OTM4-2    197   generated by the rotor eccentricity                   Santos, N. Sadowski, R. Carlson               Brazil
                Monitoring of Induction Motors Rotor Faults by non    A. Bellini, C. Concari, G.
OTM4-3    452   invasive sensors                                      Franceschini, C. Tassoni, A. Toscani          Italy
                Acoustic Noise and Displacement Analysis of a 3-
                phase Transformer Core Under Sinusoidal and           X G Yao, Thant P P Phway, A J
OTM4-4    505   PWM Excitations                                       Moses, F Anayi                                 UK
                Optimal Design to reduce Acoustic Noise in Interior   Sang-Ho Lee, Ji-Young Lee, Suk-
                Permanent Magnet Motor using Response Surface         Hee Lee, Jung-Pyo Hong, and
OTM4-5    546   Methodology                                           Young-Kyoun Kim                               Korea




13:20-14:30 Lunch at Minoa Palace Restaurant




                                                   27/34
                                    XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

14:30-15:40 POSTER (DIALOGUE) SESSION PTA1: POWER GENERATION
                      BY RENEWABLE SOURCES - FLYWHEELS
                            Tuesday, September 5th 2006

                                                                                                               Country of the
  No      Ref                     Paper title                                         Authors                  corresponding
                                                                                                                   author
                Analysis of a PM Generator-Rectifier System for       M. Andriollo, G. Bettanini, A. Morini,
PTA1-1    389   Wind Energy Applications                              G. Martinelli, A. Tortella                   Italy
                Combined Field and Circuit Theory for Non Linear
PTA1-2    356   Material Applied on Wind Turbine Generators           Oliver Drubel, Sven Exnowski               Germany
                Modeling a Fuel Cell Generator set for DC
PTA1-3    429   Transient-State studies                               G. Petropoulos, J. Prousalidis              Greece
                Study and Accomplishment of a checked model for
                an Outer-Rotor PM Synchronous Generator for           A. Olano, V. Moreno, J. Molina, I.
PTA1-4    432   Wind Turbines                                         Zubia                                        Spain
PTA1-5    441   Condition Monitoring of Wind Turbine Drive Trains     M. R. Wilkinson and P. J. Tavner              UK
                Contribution of wind farms to active and reactive
PTA1-6    428   power control requirements set by system operator     I. Zubia, X. Ostolaza                        Spain
                Genetic Algorithm Model for Profit Maximization of
                Generating Companies in Deregulated Electricity
PTA1-7    547   Markets                                               P.Georgilakis                               Greece
                Simulation and control of a variable speed wind
                turbine equipped with a multi-pole synchronous        S. Papaefthymiou and S.
PTA1-8    593   generator                                             Papathanassiou                              Greece
                Reliability and Economic Evaluation of Small
                Autonomous Power Systems containing only              Yiannis A. Katsigiannis, Pavlos S.
PTA1-9    597   Renewable Energy Sources                              Georgilakis                                 Greece
                Use of a variable-reluctance magnet machine
                (VRMM) for a direct driven wind generator.
PTA1-10   607   Analytical design                                     I Mény, J.R. Didat, P. Enrici, D. Matt      France
                Torque and Speed Control of Pitch Regulated
PTA1-11   651   Doubly Fed Induction Generator                        Bouaouiche T, Machmoum M                    France
                Dynamic Modelling of an Experimental Power            C.M. Pournaras, N.M. Kimoulakis,
PTA1-12   785   Plant from Sea Waves                                  A.G. Kladas and J.A. Tegopoulos             Greece
                Control Considerations for a Grid Connected           Antonios E. Haniotis, Antonios G.
PTA1-13   814   Variable Speed Wind Turbine                           Kladas and John A. Tegopoulos               Greece
                                                                      Chiara Boccaletti, Gerardo Duni,
PTA1-14   283   Simulation Models of Fuel Cell Systems                Gianluca Fabbri, Ezio Santini                Italy
                Stabilization of rotor shaft of fly wheel energy
                storage system by controlling armature currents of    O. Tsukamoto, A. Utsunomiya and T.
PTA1-15   182   motor generator                                       Fu                                          Japan
                Design considerations for die-cast rotor induction-
PTA1-16   616   motors operating at a speed of 30.000 rpm             M. Centner, R. Hanitsch                    Germany
                Short Time Voltage Build up Method of Induction       Takeshi Shibayama, Ismet Rahmad
PTA1-17   301   Generator for Flywheel UPS                            Kartono, Hideo Dohmeki                      Japan
                Frequency Stabilization of Small Power System by
PTA1-18   315   using Flywheel Energy Storage System                  Rion Takahashi, Junji Tamura                Japan
                Experimental Performance Evaluation of a High
                Speed Permanent Magnet Synchronous Motor and
                Drive for a Flywheel Application at Different
PTA1-19   364   Frequencies                                           A.S. Nagorny                                 USA
                On starting-up large power motors rotating high       P. Vallianatos, J. Prousalidis and E.
PTA1-20   473   inertia loads in autonomous systems                   Styvaktakis                                 Greece
                Wind Diesel System for DC bus coupling with           M. El Mokadem, C. Nichita, P.
PTA1-21   699   Battery and Flywheel Storage                          Reghem and B. Dakyo                         France




                                                    28/34
                                     XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

          14:30-15:40 POSTER (DIALOGUE) SESSION PTA2: VARIABLE
                                       RELUCTANCE MACHINES
                                       Tuesday, September 5th 2006

                                                                                                              Country of the
  No       Ref                     Paper title                                       Authors                  corresponding
                                                                                                                  author
                                                                       J. T. Charton, J. Corda, J. M.
PTA2-1     143   Developing an Iron Loss Model for SR Machines         Stephenson and S. P. Randall                UK
                 A New and Fast Design Methodology for a New
                 Linear Switched Reluctance Motor Taking
                 Performance Evaluation and Track Constraints into     D.S.B. Fonseca, C.P. Cabrita and
PTA2-2     208   account                                               M.R.A. Calado                            Portugal
                 Dynamic Performance Analysis on Switched
                 Reluctance Motors and Iron Loss Calculation using     Alexandros Michaelides and Christos
PTA2-3     226   the Finite Element Method                             Mademlis                                    UK
                 Design and Analysis of a SRM for a Hybrid Electric    Jaewon Moon, S. J. Salon, Lale
PTA2-4     240   Vehicle                                               Ergene                                     USA
                 Performance Estimation of Switched Reluctance         Behzad Mirzaeian Dehkordi, Reza
PTA2-5     286   Motor by Using Decision Tree Learning Algorithms      Zafarani, Payman Moallem                    Iran
                 Consideration of 8/6 Switched Reluctance
                 Generator Excited by Suppression Resider              A. Takahashi, H. Goto and O.
PTA2-6     300   Converter                                             Ichinokura                                Japan
                 Reluctance Network Analysis of an SR motor
                 Considering Iron loss characteristics and Optimum     K. Nakamura, S. Fujio, and O.
PTA2-7     309   Direction of the Excitation                           Ichinokura                                Japan
                 Effect of Space Harmonics on the Transient and
                 Steady-State Behavior of a Line-Start Synchronous     T. Lubin, T. Hamiti, H. Razik and A.
PTA2-8     241   Reluctance Machine                                    Rezzoug                                   France
                 Optimization of the size of the meshed zone for the
                 coupling FEM-PNM: Example on a switched               Binjie Dong, Fabien Sixdenier,
PTA2-9     425   reluctance motor                                      Laurent Morel, Benjamin Guinand           France
                 Rotor cage currents during line-start of 3 phase
PTA2-10    479   synchronous reluctance motor                          D. Miljavec, B. Zidaric M. Zagirnjak     Slovenia
                 Assessment of Linear Variable Reluctance Motor
PTA2-11    564   Performance Limits via Finite Element Modeling        Raga Ahmed and David G. Taylor             USA
                                                                       Chang J H, Kang D H, Viorel I-A,
PTA2-12    530   Saturated Double Salient Reluctance Motors            Tomescu Ilinca, Strete Larisa              Korea
                 Rotor Design on Torque Ripple Reduction for a         Jung-Min Park, Seong-June Park,
                 Synchronous Reluctance Motor with Concentrated        Min-Myung Lee, Jang-Sung Chun
PTA2-13    534   Winding using Response Surface Methodology            ,Jung-Ho Lee                               Korea
                 Anisotropy Rotor Design of Synchronous                Rae hwa Lee, Su Jin Jeon,Sun Bum
                 Reluctance Motor Using a Coupled FEM &                Kwon, Jang Sung Chun, Min Myung
PTA2-14    536   Preisach Model                                        Lee and Jung Ho Lee,                       Korea
                 Rotor design functional standard of Synchronous       Rae hwa Lee, Su Jin Jeon,Sun Bum
                 Reluctance Motor according to torque/volume using     Kwon, Jang Sung Chun, Min Myung
PTA2-15    537   FEM & SUMT                                            Lee and Jung Ho Lee                        Korea
                 Nonlinear Magnetic Circuit Model of a Linear
                 Variable Reluctance Motor Using Boundary              Nattapon Chayopitak and David G.
PTA2-16    558   Element Methods                                       Taylor                                     USA
                 Effects on Reducing Torque Ripple of SR Motors        Mirai Sato, Hiroki Goto, H. J. Guo,
PTA2-17    573   Using Freewheeling Mode                               Osamu Ichinokura                          Japan
                 An analytical approach to the magnetizing
                 inductance computation for the synchronous
PTA2-18    619   reluctance motor with axially laminated rotor         I.Torac                                  Romania
                 On The Performance improvement of a Low Speed
                 Switched Reluctance Machine With Permanent
PTA2-19    657   Magnet Excitation                                     R.Saou, K. Alitouche,M.E.Zaim             France
                                                                       A. Consoli, G. Scarcella, G. Scelba,
PTA2-20    668   Using Salient AC Machines as Virtual Resolvers        A. Testa, D. Triolo                        Italy




                                                    29/34
                                     XVII International Conference on Electrical Machines
                                Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                               Web-site: http://www.ntua.gr/ICEM2006/

14:30-15:40 POSTER (DIALOGUE) SESSION PTA3: THEORY, MODELING
                                           AND SIMULATION
                                        Tuesday, September 5th 2006

                                                                                                                   Country of the
  No      Ref                      Paper title                                           Authors                   corresponding
                                                                                                                       author
                Volume and Surface Force Densities of Interacting
                Electromagnetic and Mechanical Sub–Systems and
PTA3-1    112   their Visualization                                       C. Grabner                                 Germany
                Shielding Effectiveness of Static and Low                 Jordi-Roger Riba, Xavier Alabern
PTA3-2    132   Frequency Electric and MagneticFields                     Morera                                       Spain
                The electromagnetic field as a base for                   Janush B. Danilevich, Irina Yu.
PTA3-3    139   determination of the main AC machines parameters          Kruchinina, Yuvenaliy Ph. Khozikov          Russia
                Analysis of Rotating Magnetic Device by Surface
PTA3-4    146   Current method                                            M. Arehpanahi and J. Milimonfared             Iran
                The Partial Element Equivalent Circuit – PEEC –
PTA3-5    150   modelling : the problem of capacitance integration        C. Gillot, R. Scorretti and G. Rojat        France
                Space phasor diagrams and equivalent circuits to          Miguel Angel Rodriguez Pozueta,
PTA3-6    184   analyze synchronous machines steady states                Luis Fernando Mantilla Penalba               Spain
                Space Vector Modulation in abc Coordinates:
PTA3-7    195   Simplifing the Algorithm                                  G. Varsamis, A. Safacas                     Greece
                3D Field-Circuit Coupled Finite Element Analysis of
PTA3-8    271   a Plunger Core Reactor                                    Erich Schmidt, Peter Hamberger              Austria
                Analysis of Field Currents and Reactances for
                Adjustable-Speed Pumped-Storage Generators                K. Shima, K. Ide, M. Takahashi, M.
PTA3-9    381   Considering Rotor Duct Pieces                             Okada, and O. Nagura                        Japan
                Structure-Dynamic Analysis of an Induction                C. Schlensok, D. van Riesen, K.
PTA3-10   454   Machine with Eccentric Rotor Movement                     Hameyer                                    Germany
                Multiple Coupled Circuit Modeling of squirrel-cage
                Induction Motors Including Space Harmonics and            F. Babaa, M.E.K. Oumaamar, A.
PTA3-11   680   Line Neutral Voltage                                      Khezzar and M. Boucherma                    Algeria
                Automatic Simulating System of Gearbox Service                                                        Czech
PTA3-12   481   Load                                                      V. Dynybyl, P. Žák                         Republic
                Dysfunctions of rotating magnetic density sorters
                induced by the distribution of the magnetic field and
PTA3-13   483   the dynamic behavior of particles                         J.P. Vilain, S. Vivier                      France
                Availability Analysis of 700 kVA Generating set
PTA3-14   484   Using FMECA and Fault Tree Methods                        B. Nadji                                    Algeria
                Differential Leakage Reactance in Multiphase
PTA3-15   503   Induction Machines                                        G. Joksimovic                               Serbia
                                                                          C. Doucet, G. Lacombe, I.
                High performance 2D finite element modelling of           Charpentier, J.-L. Coulomb, C.
PTA3-16   515   rotating electrical machines                              Guérin                                      France
                Combined 2D – 1D Time-Harmonic Model for
PTA3-17   520   Analysis of Rotating Electrical Machines                  J. Pippuri and A. Arkkio                    Finland
                Instantaneous Electromagnetic Torque/Force
                Estimation in Electrical Motors using the Finite          M. Popescu, D. G Dorrell and M. I.
PTA3-18   567   Element Method – a Review                                 McGilp                                       UK
PTA3-19   722   AC Tacho-Generator Finite element analysis                Virgiliu Fireteanu, Oana Turcanu           Romania
                                                                          Raimond Grimberg, Lalita Udpa,
                Utilization of rotating magnetic field as power tool in   Adriana Savin, Rozina Steigmann,
PTA3-20   634   electromagnetic nondestructive evaluation                 Alina Bruma, Satish S.Udpa                 Romania
                Induction Motor Model for Taking Into Account
PTA3-21   142   Additional Losses                                         A. Boglietti, A. Cavagnino, M. Lazzari       Italy
                3-Dimensional Calculation of the Magnetic Field in
                the End Region of Hydrogenerators at Various              Georg Traxler-Samek, Alexander
PTA3-22   222   Steady-State Operation Conditions                         Schwery and Daho Taghezout                Switzerland




                                                      30/34
                                    XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

  14:30-15:40 POSTER (DIALOGUE) SESSION PTA4: MONITORING AND
                                            DIAGNOSTICS
                                       Tuesday, September 5th 2006

                                                                                                                Country of the
  No      Ref                      Paper title                                       Authors                    corresponding
                                                                                                                    author
                Diagnosis of Broken Bars in Large Induction Motors
PTA4-1    179   by Leakage Flux Perturbation                           C.G. Dias, I.E. Chabu, J.R. Cardoso          Brazil
                                                                       Ibrahim F. El-Arabawy, Mahmoud
                Fault Diagnostics of Voltage-Fed Inverter System       Masoud, Mohamed A. Awadallah and
PTA4-2    186   for Induction Motor Drive-A Review                     Gamal M. Mahmoud                             Egypt
                Detection of mechanical faults in asynchronous
                machines based on wavelet analysis of the stator       I. Tsoumas, E. Mitronikas, A.
PTA4-3    224   current                                                Safacas                                     Greece
                Induction Motors Bearing Failures Detection and
                Diagnosis Using a RBF ANN Park Pattern Based           I.Y. Önel, I. Şenol and M.E.H.
PTA4-4    331   Method                                                 Benbouzid                                   France
                Time Stepping Finite Element Analysis of Rotor
                Broken Bars Three-phase Squirrel-cage Induction
PTA4-5    392   Motor                                                  Jawad Faiz and B.M. Ebrahimi                  Iran
                Intelligent Fault Diagnosing of Bearings in Rotating   Alireza Sadoughi, Soheil Tashakkor,
PTA4-6    422   Machinery (a Novel Approach)                           Mohammad Ebrahimi                             Iran
                Induction Motor Broken Bar Diagnosis by
PTA4-7    430   Simultaneous Current and Vibration Sampling            M. Ebrahimi, A. Sadoughi, M. Bayat            Iran
                Synchronous Machine Diagnosis Using an External        D. Thailly, R. Romary, J.-Ph.
PTA4-8    462   Magnetic Flux Sensor                                   Lecointe, J. F. Brudny, P. Suau             France
                Real Behavior of Induction Motor Bar Breakage
PTA4-9    466   Indicators and Mathematical Model                      C. Bruzzese - O. Honorati - E. Santini       Italy
                Instantaneous Real Power Signature Analysis as a
                Tool for Airgap Eccentricity Diagnostics in Three-
PTA4-10   502   Phase Induction Motors                                 M’hamed Drif A. J. Marques Cardoso         Portugal
                Practical Evaluation of the Welch, Burg and
                Multiple Signal Classification Methods applied to
                the Detection of Rotor Broken Bars of Induction        Luís A. Pereira, Dênis Fernandes,
PTA4-11   600   Motors                                                 Daniel S. Gazzana, Fausto B. Líbano          Brazil
                Assessment of Bar Current in Induction Machines
                with Broken Bars Using a Multi-Sliced Fınite
PTA4-12   628   Element Model                                          P. J. Holik and D. G Dorrell                  UK
                A comparative investigation of electrical
                parameters for fault detection and condition
                monitoring in induction motors - stator winding
PTA4-13   666   current and electromagnetic flux                       M. Negrea, P. Jover, A. Arkkio              Finland
                Analysis and diagnosis of induction motor faults in
PTA4-14   738   high-performance drives                                S. M. A. Cruz, A. J. M. Cardoso            Portugal
                Diagnostics of Broken Rotor Bars in Induction          M.E.K. Omaamar, F. Babaa, A.
PTA4-15   679   Machines Using the Neutral Voltage                     Khezzar and M. Boucherma                    Algeria
                Detection of the Combination of Static and
                Dynamic Air gap Eccentricity in 3-Phase Induction
PTA4-16   686   Motors using Stator Current Monitoring                 Irahis Rodriguez, Roberto Alves           Venezuela
                Comparative Study of Voltage Sag Effects on
                Complete and Reduced-Order, Single and Double-         H. Martín, J. Pedra, J. Llaverías, R.
PTA4-17   700   Cage Models of Induction Motor                         Bargalló                                     Spain
                Impact of harmonic voltage distortion on the
PTA4-18   701   voltage sag behaviour of adjustable speed drives       K. Stockman, J. Desmet, R. Belmans          Belgium
                Diagnostic System for On-line Monitoring of
PTA4-19   711   Induction Motor Drives                                 R. Fiser, M. Bugeza, H. Lavric             Slovenia
                Analysis of an Axial flux PM Machine with Field
                Weakening Capability under Symmetric Fault             Álvaro Letelier, Juan A. Tapia, Rogel
PTA4-20   665   Condition                                              Wallace, Anibal Valenzuela                   Chile
                Design Characteristics of a Real Time Fault
                Classifier for Generators and Transformers in
PTA4-21   675   Power Plants                                           C.C. Kontogiannis, A.N.Safacas              Greece
                Comparative Study between Inter-turn Short-
                Circuits and Unbalanced Voltage Supply in               F. Babaa, M. Y. Kaikaa, A. Khezzar
PTA4-22   681   Induction Machines                                     and M. Boucherma                            Algeria
                Low Frequency Filtering for the Diagnosis of Cage      J. A. Antonino, J. Rusek, M. Riera, J.
PTA4-23   561   Asymmetries in Induction Machines                      Roger-Folch                                  Spain




                                                    31/34
                                     XVII International Conference on Electrical Machines
                                Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                               Web-site: http://www.ntua.gr/ICEM2006/

          14:30-15:40 POSTER (DIALOGUE) SESSION PTA5: THERMAL
                                     PHENOMENA AND COOLING
                                      Tuesday, September 5th 2006
                                                                                                                Country of the
  No       Ref                      Paper title                                       Authors                   corresponding
                                                                                                                    author
                 The temperature distribution of the stator bar in the
                 evaporative cooling system of the large hydro-
PTA5-1     158   generators                                              Feihui Liu, Lin Ruan, Guobiao Gu           China
                 A Thermal Hydraulic Model and its Application on
PTA5-2     159   Electrical Machines                                     F. Bachinger, P. Hamberger                Austria
                 Dynamic thermal analysis of an induction
                 servomotor with coupled electromagnetic-thermal
PTA5-3     160   model                                                   J. Puranen, J. Pyrhonen                  Finland
                 Drive of Nonconvectional Stator Winding Slot                                                      Czech
PTA5-4     194   Cooling by Water                                        R. Vlach                                 Republic
                 Cooling and Thermal Modelling Aspects of Tooth          A. Di Gerlando, G. M. Foglia, R.
PTA5-5     236   Coil, Permanent Magnet Synchronous Machines             Perini, M. Ubaldini                        Italy
                 A Novel Lumped Parameter Thermal Model for
PTA5-6     324   Electrical Machines                                     G. Dajaku, D. Gerling                    Germany
                 Investigation of the Thermal Behavior of a Salient      H. Lang, C. Kral, A. Haumer, H.
PTA5-7     418   Pole Synchronous Machine                                Kapeller, M. Haigis, R. Schulz            Austria
                 CFD Validation and Air Cooling Design                   R. Dépraz, F. Avellan,A. Schwery, R.
PTA5-8     474   Methodology for Large Hydro Generators                  Zickermann                              Switzerland
                 Measurements of Thermal Resistance on Ready-
PTA5-9     494   made Induction Motors                                   Jerzy Mukosiej                            Poland
                 Thermal Analysis of a Linear Permanent-Magnet           Nattapon Chayopitak and David G.
PTA5-10    559   Motor with Concentrated Windings                        Taylor                                     USA
                 Thermal characterisation of electrical steels and
                 thermal sensitivity analysis of a 7.5 kW induction      E. Hoferlin, B. Soenen, M. De Wulf,
PTA5-11    707   machine                                                 S. Jacobs                                 Belgium



15:40-16:00 Coffee Break


16:00-17:40 ORAL SESSION OTA1: POWER GENERATION BY RENEWABLE
                                                 SOURCES
                                         Tuesday, September 5th 2006
                                                     Athina1 Room

                                                                                                                Country of the
  No       Ref                      Paper title                                       Authors                   corresponding
                                                                                                                    author
                 A new approach for securing efficient operation of a    Demetrios P. Papadopoulos, Sotirios
OTA1-1     111   water-pumping system fed by a PV generator              B. Skretas                                Greece
                                                                         Hyung-lae Choi, Sung-jun Park, Hae-
                 High efficient the load dispersion a new PV             kon Nam, Joon-Ho choi, Chae-ju
OTA1-2     376   tracking system                                         Moon                                       Korea
                 A Maximum Power Point Tracking algorithm for
                 photovoltaic power systems with the control of the
OTA1-3     705   output voltage                                          F. Esposito, S. Meo, L. Piegari            Italy
                 Control of Linear Electrical Generators for Direct      J.K.H. Shek, D.E. Macpherson, M.A.
OTA1-4     256   Drive Wave Energy Conversion                            Mueller                                     UK
                 Design methodology of an electromagnetic                M. Ruellan, H. Ben Ahmed, B.
OTA1-5     461   generator for wave energy conversion                    Multon, A. Babarit, A. Clement            France




                                                      32/34
                                    XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

16:00-17:40 ORAL SESSION OTA2: VARIABLE RELUCTANCE MACHINES
                                        Tuesday, September 5th 2006
                                                    Athina2 Room


                                                                                                                Country of the
 No       Ref                      Paper title                                      Authors                     corresponding
                                                                                                                    author
                Rotor Shape Design of a Switched Reluctance          I. Gourragui, F. Léonard, G. Abba,
OTA2-1    409   Motor                                                and J-C. Vivalda                              France
                Calculation of Characteristics of an SR Motor with
                Divided Stator Cores Made of Grain-oriented          K. Murota, K. Nakamura, and O.
OTA2-2    321   Silicon Steel                                        Ichinokura                                    Japan
                Multi-Objective Optimal Design of Linear Variable    Matthew B. Hortman, Nattapon
OTA2-3    410   Reluctance Motors Using Genetic Algorithms           Chayopitak, and David G. Taylor                USA
                The Use of Segmental Rotors for 2 Phase Flux-        B.C. Mecrow, T.J. Bedford, J.
OTA2-4    608   Switching Motors                                     Bennett and T. Celik                            UK
                Design of High Performance Synchronous
                Reluctance Motors by Finite Element Analysis and     E. Chiricozzi, F Parasiliti, M. Tursini,
OTA2-5    501   Optimization Algorithm: Prototype And Test           M. Villani                                     Italy




         16:00-17:40 ORAL SESSION OTA3: THEORY, MODELING AND
                                              SIMULATION
                                        Tuesday, September 5th 2006
                                                    Athina3 Room


                                                                                                                Country of the
 No       Ref                      Paper title                                      Authors                     corresponding
                                                                                                                    author
                A simulation tool linking hydroelectric production   J.-J. Simond, Ph. Allenbach, C.
OTA3-1    228   sites and electrical networks                        Nicolet, F. Avellan                         Switzerland
                Simulation of Small Hydro Generators in Islanding    A. Dagoumas, A. Marinopoulos, G.
OTA3-2    308   Operation in weak Distribution Networks              Papagiannis, P. Dokopoulos                    Greece
                Finite Element Assisted Study of Magnetic
                Configurations of Flat Pickups for Inductively
OTA3-3    576   Coupled Power Transfer Systems                       D. Kacprzak, J. K. Sykulski                     UK
                Generalized Analysis of Electromechanical Devices
OTA3-4    713   Using Pseudo-Linear Transformations                  P. Bolognes                                    Italy
                Theoretıcal Analysıs of the ELCID Method Usıng       V. M. Gandshu, V.V.Gorodov, S.D.
OTA3-5    718   QuıckFıeld FEA package                               Dubitsky, V.G. Podnos                         Canada




                                                     33/34
                                    XVII International Conference on Electrical Machines
                               Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
                                              Web-site: http://www.ntua.gr/ICEM2006/

16:00-17:40 ORAL SESSION OTA4: LOSSES, THERMAL PHENOMENA AND
                                               COOLING
                                        Tuesday, September 5th 2006
                                                    Ariadne Room


                                                                                                              Country of the
 No      Ref                      Paper title                                          Authors                corresponding
                                                                                                                  author
               On stator yoke rotational iron losses in permanent
OTA4-1   622   magnet machines                                           T. Modeer                               Sweden
               Analysis of the core loss data fitting alternatives for   P. Arboleya, G. Díaz, C. González-
OTA4-2   624   induction motor loss computation                          Morán, J. Gómez-Aleixandre               Spain
               Experimental Approach to the End-Windings
OTA4-3   117   Cooling Effects in Induction Motors                       A. Boglietti, A. Cavagnino               Italy
               Comparison of Measurements with a CFD Analysis
               and a Thermal Equivalent Circuit Model of a TEFC          C. Kral, A. Haumer, M. Haigis, H.
OTA4-4   380   Induction Machine                                         Lang, H. Kapeller                       Austria
               A Complex Space Vector Approach to Rotor
               Temperature Estimation for Induction Machines             Zhi Gao, Thomas G. Habetler and
OTA4-5   688   with Impaired Cooling and Unbalanced Supply               Ronald G. Harley                         USA




    17:50-18:30 CLOSING CREMONY AND CONCLUDING REMARKS
                                        Tuesday, September 5th 2006
                                                    Athina1 Room




                                                     34/34