Test Certificate Intertek Testing
Document Sample


Intertek Testing Services Hong Kong Ltd.
2/F., Garment Centre, 576 Castle Peak
Road, Kowloon, Hong Kong.
Tel: (852) 2173 8888 Fax: (852) 2785 5487
Energy Saving Mark CERTIFICATE
Based on the compliance results of product evaluation and surveillance program, this authorizes
the Certificate Holder to apply of the Energy Saving Mark shown below to the product; when made
in accordance with the descriptions under the conditions set forth in the Certification Agreement
and Compliance Test Report herein:
Certificate Holder : Jiangyin Sanhe Electric Co., Ltd.
Name & Address Gushan Town Industrial Park, Jiangyin City, Jiangsu
Province, P.R.China
Manufacturing Site : Jiangyin Sanhe Electric Co., Ltd.
Name & Address Gushan Town Industrial Park, Jiangyin City, Jiangsu
Province, P.R.China
Energy Saving Mark Control No. : ESM00011
Product Description : AC-AC Adapter
Trademark : None
Model/Type/Part Number (s) : SH-12V0500IP20,AEO-1012,AEO-2012,AEO-0612
Test Report Reference Number : SH08110673-001
Relevant Standard(s) / : AS/NZS 4665.1:2005+A1:2008&4665.2:2005+A1:2008
Specification(s) Performance of external power supplies (4665.1 Part1:Test
method and energy performance mark4665.2 Part2:Minium
energy performance standard (MEPS)requirements)Prepared
by the Joint Standards Australia/Standards New Zealand
Committee TE-001,Safety of Electronic Equipment.
Certificate Reference Number : ESM00011-001-00
Certificate Issue Date : 2-Feb-2009
Certificate Expiry Date : 1-Feb-2010
NOTE 1: This document is the property of Intertek Testing Services Hong Kong Ltd. and is not transferable.
Only the Certificate Holder may reproduce this document.
This Certificate is for the exclusive use of Intertek's Client and is provided pursuant to the Certification agreement between Intertek and its Client.
Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the
Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this certificate. Only the Client is authorized to permit
copying or distribution of this certificate and then only in its entirety. Use of Intertek’s Certification mark is restricted to the conditions laid out in the
agreement. Any further use of the Intertek name for the sale or advertisement of the tested material, product or service must first be approved in writing
by Intertek. Initial Factory Assessments and Follow up Services are for the purpose of assuring appropriate usage of the Certification mark in accordance
with the agreement, they are not for the purposes of production quality control and do not relieve the Client of their obligations in this respect.
Approved by
Name: Pearly Yu
Position: Certification Manager
Date: 02 Feb 2009
www.intertek.com
Get documents about "