ATTACK PREVENTION WITH JUNIPER NETWORKS FIREWALLS

Document Sample
ATTACK PREVENTION WITH JUNIPER NETWORKS FIREWALLS Powered By Docstoc
					OPERATING JUNIPER NETWORKS ROUTERS IN THE ENTERPRISE
Course No: EDU-JUN-OJRE Length: Four days

This four-day course is an introductory-level, instructor-led course that focuses on installation, configuration, operational analysis, and
troubleshooting considerations of Juniper Networks routers in the enterprise. OJRE introduces Juniper Networks Enterprise Routing
platforms including both M-series and J-series models. It then focuses on router configuration using both the J-Web graphical user
interface (GUI) and the JUNOS software command-line interface (CLI). Real-world configuration and operational monitoring case
studies are provided for general router configuration and for RIP, static, and OSPF routing. The class also provides an overview of
common services such as the Virtual Router Redundancy Protocol (VRRP), the Multilink Point-to-Point Protocol (MLPPP) and Network
Address Translation (NAT). The course combines both lecture and labs, with significant time allocated for hands-on experience with J-
series platforms and JUNOS software. The OJRE class is an excellent way to prepare students for attending other offerings in the
Juniper Networks training curriculum.
ADVANCED JUNIPER NETWORKS ROUTING IN THE ENTERPRISE
Course No: EDU-JUN-AJRE Length: Four days

This four-day course is designed to provide enterprise network engineers with the knowledge and skills necessary to use Juniper
Networks routers to meet their networks´ requirements. It covers advanced routing and services configurations of Juniper Networks J-
series and M-series platforms, focusing specifically on advanced configurations commonly used in the enterprise environment.
CONFIGURING JUNIPER NETWORKS FIREWALL/IPSEC VPN PRODUCTS
Course No: EDU-JUN-CJFV Length: Three days

This course is the first in the ScreenOS curriculum. It is a three-day, instructor-led course that focuses on configuration of the Juniper
Networks firewall/VPN products in a variety of situations, including basic administrative access, routing, firewall policies and policy
options, attack prevention features, address translation, and VPN implementations. The course combines both lecture and labs, with
significant time allocated for hands-on experience. Students completing this course should be confident in their ability to configure
Juniper Networks firewall/VPN products in a wide range of installations.
JUNIPER NETWORKS BUNDLED FIREWALL TRAINING
Course No: EDU-JNCIS-FWV Length: Five days

This 5 day course starts with an intermediate-level course focusing on the wide range of options available when configuring VPNs
using Juniper Networks firewall/VPN products. Students attending the course will learn these various deployments through detailed
lectures and hands-on lab exercises. The course progresses to concentrate specifically on the attack-related features and assumes
familiarity with ScreenOS software. Upon completing this course, you should be able to return to work and successfully configure and
verify the desired attack prevention features.

The course also includes the ScreenOS features that are typically required in large-scale networks, including dynamic routing, virtual
systems, traffic shaping, and high availability. Upon completing this course, students should be able to return to work and successfully
install, configure, and verify that a ScreenOS-based device is interoperating in the network as desired. Through demonstrations and
hands-on labs, students gain experience in configuring, testing, and troubleshooting these advanced features of ScreenOS software.
Combines: Advanced Juniper Networks IPSec VPN Implementations, Attack Prevention with Juniper Networks Firewalls, Integrating
Juniper Networks Firewalls and VPN’s into High and Performance Networks.

ATTACK PREVENTION WITH JUNIPER NETWORKS FIREWALLS
Course No: EDU-JUN-APJF Length: One day

This one-day course meets the business need of customers who are deploying the attack prevention features of ScreenOS software.
The course focuses specifically on the attack-related features and assumes familiarity with ScreenOS software. Upon completing this
course, you should be able to return to work and successfully configure and verify the desired attack prevention features.
Full course schedule E-Mail juniper@westcongroup.com.au or any enquiries on call 1800 646 112
OPERATING JUNIPER NETWORKS WX APPLICATION ACCELERATION PLATFORMS
Course No: EDU-JUN-OJWX Length: Two days

This two-day, instructor-led course focuses on installation, configuration, troubleshooting, and operational analysis of the WAN
Acceleration (WX) and WAN Acceleration Cache (WXC) platforms. The course covers an overview of WX platform concepts and then
moves on to initial installation using Quick Setup. The WebView graphical user interface (GUI) is used to configure and manage the
main features of the WX platform: compression (using Molecular Sequence Reduction and Network Sequence Caching), Packet Flow
Acceleration (TCP application acceleration), Application Flow Acceleration (which speeds up CIFS, Microsoft Exchange, and HTTP
traffic), and implementation of quality-of-service (QoS) policies. In the labs, students configure and test all these features. The WX
Framework’s exceptional monitoring and reporting capabilities are featured throughout, and the course ends with an introduction to the
WX Central Management System (CMS) software.
ADVANCED DESIGN, CONFIGURATION & TROUBLESHOOTING OF JUNIPER NETWORKS WX
Course No: FENTROPY-ADVWX Length: Two days

This two-day instructor-led course addresses the advanced features and design concepts of the WX platform that are not covered in
the introductory course. Engineers who have completed EDU-JUN-OJWX or have some basic experience configuring WX devices will
find this course equips them to design, implement, and trouble-shoot WX devices in even the most complex scenarios with minimum
risk and maximum efficiency. Topics include: High Availability features, Policy Based Multi-path, Best Practices for Large Scale WX
Designs, Best Practice for QoS Configuration, Advanced Diagnostic features, “hidden” features for performance optimization.
MANAGING WX NETWORKS WITH JUNIPER NETWORKS WX CMS
Course No: FENTROPY-CMS Length: One day

This one-day instructor-led course explains how CMS works and presents proven methods to deploy, upgrade, and manage any size
of WX network. After completing this course, administrators will derive full value from their CMS investment for both owner-operated
and multi-tenanted systems alike. Topics include: CMS server specification and setup, CMS User Management (including segregation
of users or clients), Integration of CMS with other infrastructure (AD, SNMP, SMTP, etc), Managing WX Licences in Bulk with CMS,
Content Management with CMS, Zero-touch Auto-deployment of WX Devices, Best Practices for Designing Scalable & Re-usable WX
Configuration Templates, Backing Up & Restoring CMS Configuration and Data (including establishing automatic backup routines).
OPERATING JUNIPER NETWORKS SWITCHES IN THE ENTERPRISE
Course No: EDU-JUN-OJXE Length: Four days

This four-day course discusses the configuration of Juniper Networks EX-series switches in a typical network environment. Key topics
include a platform overview, user configuration interfaces, initial and secondary system configuration tasks, operational monitoring of
an EX-series switch, Ethernet switching concepts, the Spanning Tree Protocol (STP), inter-VLAN routing, switching security protocols
and features, IP telephony features, and design and implementation considerations.
CONFIGURING JUNIPER NETWORKS SECURE ACCESS
Course No: EDU-NS-CJSA Length: Two days

This two-day course discusses the configuration of Secure Access (SA) products in a typical network environment. Key topics include
SSL access technologies, basic implementation, and configuration and management options. Through demonstrations and hands-on
labs, students will gain experience in configuring, testing, and troubleshooting basic facets of the SA products.

ADVANCED JUNIPER NETWORKS SECURE ACCESS
Course No: EDU-JUN-AJSA Length: Two days

This two-day course discusses the advanced configuration of Secure Access (SA) products. Key topics include PKI support, additional
authentication and authorization servers, complex policies, customization, virtual systems, high availability, and Secure Meeting.
Through demonstrations and hands-on labs, students will gain experience in configuring, testing, and troubleshooting advanced
features of the SA product
Full course schedule E-Mail juniper@westcongroup.com.au or any enquiries on call 1800 646 112

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:24
posted:5/3/2010
language:English
pages:2
Description: ATTACK PREVENTION WITH JUNIPER NETWORKS FIREWALLS