Fusion HDTV

					                                           FusionHDTV




1   Before Getting Started ...............................................................................2
    1.1        FusionHDTV Specification.......................................................................................................... 2
    1.2        FusionHDTV System Requirements........................................................................................... 4
    1.3        Package contents ....................................................................................................................... 5

2   Software Installation...................................................................................7
    2.1        Installing FusionHDTV Applications............................................................................................ 7
    2.2        Driver installation under Windows 2000 Professional .............................................................. 12
    2.3        Driver installation under Windows XP ...................................................................................... 14

3   Hardware Installation ...............................................................................18
    3.1        About the Board........................................................................................................................ 18
    3.2        Before Installation PCI card ...................................................................................................... 20
    3.3        Connecting Power UP cable..................................................................................................... 21
    3.4        PCI Board Installation ............................................................................................................... 23
    3.5        Remote Installation ................................................................................................................... 24

4   Using FusionHDTV ...................................................................................25
    4.1        Starting and Quitting ................................................................................................................. 25
    4.2        Display setup ............................................................................................................................ 25
    4.3        Using FusionRemote ................................................................................................................ 29
    4.4        FusionHDTV Shortcut Key ....................................................................................................... 31

5   Technical Support ....................................................................................32
1     Before Getting Started
1.1      FusionHDTV Specification

         A Highly cost effective reception card

        You can enjoy HDTV at quite a low price due to Dvico’s innovative HDTV software decoding engine.

         Unrivaled crystal-clear picture quality

        FusionHDTV provides up to 5 times higher resolution when compared to analog TV, and provides
        crisp and crystal-clear picture quality to a PC screen.

         Good picture quality on LCD or low-resolution monitor

        FusionHDTV shows excellent and super-clear on HDTV screens and even on LCD TV’s and low
        resolution CRT due to Dvico’s proprietary decoding engine.

         Great system compatibility

        FusionHDTV is compatible with most video cards and motherboards. FusionHDTV works on any
        recent VGA cards including Nvidia MX series or later chipsets, as well as ATI Radeon chipsets. It
        works quite well on Intel, VIA, SIS, and other motherboard chipsets. Minimum system requirements
        are Pentium 4 1.6G and DDR266 memory (or RDRAM memory), or AMD’s Athlon™ XP 1600+ or
        faster processor, if you don’t have the ATI Radeon VGA card. Pentium 3 800Mhz or faster will be
        enough if you have an ATI Radeon card.

         Recording and playback of the HDTV stream

        You can record live HDTV broadcasting streams to a PC and play them back anytime you want. You
        can select the single sub-channel or whole stream recording when you hit recording button.

         Using the most recent tuner

      FusionHDTV uses the most recent tuner to get the best reception rate, so you can get the un-interrupted
      and stable HDTV screen

         Supports all the formats of Australian AS4933 spec of Australian AS4933 spec

      FusionHDTV supports All digital terrestrial channels, so you will have the ability to receive all the
      channels available to you at your location.

         Support analog Video Signal Capture

      You can Captures analog video signal (Composite and SVHS) and convert it to VCD/ SVCD/ DVD
      format. This feature cannot be supported depending on product.

         Supports S/PDIF audio output thru sound card

        It can bypass the audio to digital output and connect directly to an AV amplifier.

         High resolution still capture

        FusionHDTV provides high resolution still screen capturing capability in live playback as well as file
        playback mode.

         Cut-on-the-fly feature – Cut the transport stream files

        You can cut out the wanted scenes from the captured file and reconstruct the Digital clip.

         Supports sub-channel

       Sub channel is listed up in sub channel play list and can be selected with channel up/down button or
       mouse selection in sub channel play list.



              All specifications and information are subject to changes without further notices             2
    Second language

 Supports the second language in digital broadcasting.

    Supports screen saver off.

  Screen saver is off while FusionHDTV runs.

    Supports AAC audio decoding (Not supports Lite/Home series)

 TS file clips and DVHS with AAC audio can be played directly in FusionHDTV.

    Direct NATIVE .MPG recording

You can record DTV stream to .MPG format directly. Native MPG means you can record a Tp stream to a
mpeg format while maintaining video, resolution, and audio information.

    Add To Favorite List

 You can add your favorite programs into favorite list before watching them.

    HD-to-DVD or DivX format conversion (Not supports Lite/HOME series )

 HD clips can be converted to MPEG2, DVD files or DivX format using FusionConverter tool.

    Supports DVHS record and control (Not supports Lite/HOME series)

Direct DVHS capture/ recording/ playback with OHCI card( Windows XP or above only )

    Supports Teletext and subtitle
   You can show the real time teletext browser and subtitle.

    Time Shifting
FusionHDTV provides the various file playback functions just like live TV mode. That is, pause/ instant
replay/ time-shifting by scroll bar/ fast-forward/ fast-rewind.

Being interrupted while watching live TV programs (such as pick up phone calls & answer the door), all
you need to do is simply press the Pause button and freeze the picture for a period of time, and then
pick up right where you left off.

The FF/REW Function is available Windows XP Service Pack 2 or above

    Supports Thru Pass Port (DVB-T Home only)

The Thru Pass mean that you can plug your antenna into the card and then another cable into the card
to act as a repeater signal for another TV.

    Supports PIP (Picture in Picture)

The FusionHDTV is like having two TVs in one! With the Picture in Picture (PIP) function you can now
watch two of your favorite programs all on a single screen.

    Supports Multi-View

You can see all sub channel video on the single video screen.
 - This function is available under Windows XP or higher to be installed.
 - The multi-View function is available without Time-shifting or analog channel.
 - When the Fullscreen mode, this function doesn't work at this moment.


    Supports Power up function

FusionHDTV DVB-T Pro/Dual digital2 or ATSC RT series is available the Power Up function.
Turn ON or OFF your PC like you do your TV. With multifunctional remote control you will be able to
boot your PC from a distance. Not only does it provide perfect control of all HDTV functions you will also
be able to control Windows MCE 2005 and many other application programs with this multifunctional
remote control.



         All specifications and information are subject to changes without further notices              3
1.2      FusionHDTV System Requirements
System requirements for FusionHDTV are as follows

<Input/Output>

      < DVB-T PCI >

         One TV antenna reception port          One Thru Pass Port (DVB-T Home)

         One inside stereo connection jack to sound card for VIDEO

         S-Video IN, Composite IN (Lite/Home model is not supported)

      < FusionHDTV 5 PCI, 5 Express >

        antenna       S-Video IN, Composite IN (Lite/Home model is not supported)

        One inside stereo connection jack to sound card for analog TV (5 Express doesn’t support)

      < FusionHDTV 5 USB >

        One TV antenna reception port            One VIDEO-IN Port

        One USB Port ( USB 2.0 only)

        Analog TV is available windows XP service pack 1 or above.

<DxVA VGAs>

        Pentium3 800MHz or faster with 128M memory

        Celeron 900Mhz or faster with 128M memory

        GeForce4 MX420,440,Fx5200,5600 Series or late all models.

        Pentium M 1.4GHz or faster for notebook PC

        All ATI Radeon series VGAs

        2000/XP/MCE 2005 or later

        : FusionHDTV DVB-T Dual Digital4 is not supported under windows 2000 at this version.

        Ultra-DMA66 enabled main board and HDD for recording

<nonDxVA VGAs>

        Pentium4 1.6GHz or faster with 128M memory

        All Nvidia MX series VGAs and ATI Radeon series VGAs

        All Matrox series VGAs

        DDR266 or faster memory

        2000/XP/MCE 2005 or later

        : FusionHDTV DVB-T Dual Digital4 is not supported under windows 2000 at this version.

        Ultra-DMA66 enabled main board and HDD for recording



<Remote control booting>

FusionHDTV DVB-T Pro , ATSC 5 RT series or Express is available the Remote control booting function.
Turn ON or OFF your PC like you do your TV.

             All specifications and information are subject to changes without further notices         4
1.3       Package contents
The FusionHDTV package contains the following items. Some packages may change depending on other
conditions.
DVB-T Product :



[ DVB-T pro , DVB-T Dual-Digital 4 ]
      1                2                3           4                5                    6      7




          ① FusionHDTV card           ② Setup CD        ③ Manual

          ④ Internal cable to sound card for External output Audio (DVB-T Pro only)

          ⑤ External connection cable(DVB-T Pro only)

          ⑥ FusionHDTV transceiver      ⑦ Remote receiver

** SW power cable is available with DVB-T Pro and DVB-T Dual-Digital 4. (refer to 3.3 chapter)

[ DVB-T HOME ]

               1           2                3                    4                  5




          ① FusionHDTV card           ② Setup CD        ③ Manual

          ④ FusionHDTV transceiver      ⑤ Remote receiver



* FusionHDTV remote transceiver is basic option.


      1
                                  2             3




          ① FusionHDTV transceiver

          ② Remote Receiver

          ③ DVB-T pro external connection cable (Include the Line-in and remote connector)



             All specifications and information are subject to changes without further notices       5
        ATSC Product :

[ FusionHDTV 5 RT GOLD, FusionHDTV 5 Express ]


    1                   2               3               4                  5




            ① FusionHDTV card           ② Setup CD          ③ Manual

            ④ Internal cable to sound card for External output Audio (5 Express doesn’t support)

            ⑤ External connection cable

** SW power cable is available with FusionHDTV 5 RT model (refer to 3.3 chapter).
[ FusionHDTV 5 Lite ]




            ① FusionHDTV card           ② Setup CD          ③ Manual

            ④ Internal cable to sound card for External output Audio

[FusionHDTV 5 USB ]

    1                       2                3               4                 5               6




            ① FusionHDTV USB Board          ② Setup CD ③ Manual

            ④ FusionHDTV transceiver        ⑤ Indoor Antenna     ⑥ External connection cable

* Optional FusionHDTV remote transceiver and basic option for Plus Version.


        1
                                    2               3




            ① FusionHDTV transceiver

            ② Remote Receiver

            ③ 5 RT Gold external connection cable (Include the Line-in and remote connector)



               All specifications and information are subject to changes without further notices   6
2     Software Installation
Most likely there will be an updated version of the files on our web site.

Please check the site (http://www.FusionHDTV.co.kr/Eng) before you install the software included in the CD.

2.1      Installing FusionHDTV Applications
Insert FusionHDTV Installation CD into the CD-ROM drive. The setup window will automatically pop up. if
you downloaded the recent version on DVICO’s website, please run install.exe or setup.exe.




2.1.1         Uninstall Drivers
      1) When you select Uninstall Driver in the menu on the FusionHDTV INSTALLER program, Select your
         FusionHDTV board type.




      2) It will remove all the old drivers previously installed.




      3) When all the drives are removed, you will see following message.




              All specifications and information are subject to changes without further notices           7
2.1.2      Installing FusionHDTV Software
Important: Installation on Windows 2000 Professional or Windows XP
Before you install FusionHDTV software, be sure that you logged on as an account with
Administrator privileges.




   1)   Select “Install FusionHDTV”.

   2)   At the FusionHDTV Installation dialog
        opens, click on the “Next>” button.




   3) The “Choose Destination Location”
      window will appear. Click on “Next” if
      you want to install the FusionHDTV in
      the default directory. Otherwise, you
      can choose a different directory by
      clicking on “Browse”.




   4) Press “Next” on the         Destination
      Folder selection window.




           All specifications and information are subject to changes without further notices   8
5) The “Setup status” window will appear.




                                      6) Choose your country, then click “OK”.




7) PC specification selection windows will appear.
   Please select the appropriate system. You can
   change the mode after installation with configuration
   menu of the application program. You do not need to
   reinstall the program with different options.




8) Select your FusionHDTV card, and Press
   ‘Install Driver’ to install latest drivers.




        All specifications and information are subject to changes without further notices   9
   9) If you install the 64bit driver,
      following installer appears. Press
      ‘Next’.




   10) If you connect 2 card or above, Press “YES”
       and then re-install another driver, but if you
       have 2 same card, you may press “NO”.




   11) You will see the progress window.




   12) Press “Continue Anyway” for the
       digital signature message.

   13) Following message indicates            the
       completion of the setup.



   14) By clicking the Finish button, the
       software installation is done.



   15) When you reboot, the system will
      ask for the 5(6) drivers. Please click
      “Yes” when the digital signature
      window appears.




<Notes>

   In certain cases, Windows will ask for the .sys files. You can locate the sys files in the C:\Program
   Files\DVICO\FusionHDTV\driver or C:\Windows\System32\Drivers folder.




           All specifications and information are subject to changes without further notices         10
2.1.3       Installing Microsoft DirectX 9
Important! Installing on Windows 2000 Professional or Windows XP
You can check the version of DirectX by typing “dxdiag” on the command line which appears with
menu selection “start->run”

If you have DirectX 9 or later already, you
do not need to install DirectX 9 again.

    1) Run ‘Install.exe’ and then select
       “Install Direct 9”.

    2) Read     the  License     Agreement
       carefully and check “I accept the
       agreement” and then click on “Next” if
       you agree.




    3) To start installing of DirectX 9.0
       Runtime, click on “Next”.




Tip      If there is a DirectX already installed
in the system, a different window will show up
instead of the one above.

    4) Click on “Finish” to restart system
       and complete installation of the
       DirectX.




             All specifications and information are subject to changes without further notices   11
2.2         Driver installation under Windows 2000 Professional
2.2.1         Before Installation
Make sure that you install the software in the following order.

      1) Install the Application software(refer to 2.1 Installing FusionHDTV Applications)

      2) Install hardware(board) (refer to 3.3 Board Installation)

      3) Install the Windows 2000 Drivers (refer to 2.2.2 Installing Windows 2000 driver)

      4) Check Windows 2000 device manager (refer to 2.2.3 Checking Windows Driver)



2.2.2         Installing Windows 2000 driver
      In certain cases, Windows will ask for the .sys files. You can locate the sys files in the C:\Program
      Files\DVICO\FusionHDTV\driver or C:\Windows\System32\Drivers folder.

      1) Insert the FusionHDTV board into the PCI local bus slot. When Windows 2000 starts, the Add New
         Hardware Wizard will pop up automatically.




      2) When the Digital Signature Not Found window appears, Click on “Yes”.




      Tip

       [DVB-T Pro]

      Using this way, you may install “FusionHDTV 88x, BDA Receiver (DVB-T)“, “FusionHDTV 88x, Video
      Capture(PAL) “, “FusionHDTV 88x, WDM Crossbar, FusionHDTV 88x, BDA Tuner(DVB- PRO) “,”
      FusionHDTV 88x, WDM Tuner(DVB- PRO)” ,” FusionHDTV 881, WDM Audio Capture” drivers.

      [DVB-T HOME ]

      Using this way, you may install “FusionHDTV, BDA Receiver(DVB-T)“, “FusionHDTV, Video
      Capture(PAL) “, “FusionHDTV, WDM Crossbar, FusionHDTV, BDA Tuner(DVB-T Lite) “,” FusionHDTV,
      WDM Tuner(DVB-T Lite)”drivers.

** If a driver file look for, click the browse button. Select the driver directory under the installation directory

               All specifications and information are subject to changes without further notices                12
(ex : C:\Program Files\Dvico\FusionHDTV\driver) or Driver folder of installation CD.



2.2.3       Checking the Windows 2000 driver
Right click the “My Computer” icon and select “properties” from the popup menu. Select Hardware-> Device
Manger. You must see following devices properly installed under the “Sound video and game controllers”.

[ DVB-T Pro ]




[ DVB-T HOME ]




** If a driver file look for, click the browse button. Select the driver directory under the installation directory
(ex : C:\Program Files\Dvico\FusionHDTV\driver) or Driver folder of installation CD.
 [ FusionHDTV 5 USB]                                     [FusionHDTV 5 RT Lite]




[ FusionHDTV 5 RT GOLD ]                                    [ FusionHDTV 5 Express ]




             All specifications and information are subject to changes without further notices                  13
2.3      Driver installation under Windows XP
2.3.1        Before Installation
Make sure that you install the software in the following order:

      1) Install the Application software (with reference to 2.1 Installing FusionHDTV Applications)

      2) Install Hardware (refer to 3.3 Board Installation )

      3) Install the Windows XP drivers (with reference to 2.3.2 Installing Windows XP driver)

      4) Check Windows XP Device Manager (with reference to 2.3.3 Checking Windows XP Driver )

2.3.2        Installing Windows XP drivers
      If you already installed the FusionHDTV software, insert the FusionHDTV board into the PCI local bus
      slot.

In certain cases, Windows will ask for
the .sys files. You can locate the sys files
in              the             C:\Program
Files\DVICO\FusionHDTV\driver             or
C:\Windows\System32\Drivers folder.

      1) When the “Add New Hardware
         Wizard window” appears, select
         “Install the software automatically
         (Recommended)” and then click
         “next”.




      2) When the ”FusionHDTV 88x, WDM Tuner”
         window appears, Click “Continue Anyway”.




              All specifications and information are subject to changes without further notices        14
3) After files are copied, Click “Finish” if the “FusionHDTV 88x, WDM Tuner” driver is properly installed.




Tip

 [DVB-T Pro]

Using this way, you may install “FusionHDTV 88x, BDA Receiver(DVB-T)“, “FusionHDTV 88x, Video
Capture(PAL) “, “FusionHDTV 88x, WDM Crossbar, FusionHDTV 88x, BDA Tuner (DVB-PRO) “,”
FusionHDTV 88x, WDM Tuner(DVB- PRO)” ,” FusionHDTV 881, WDM Audio Capture” drivers.

[DVB-T Dual Digital 4]

Using this way, you may install “” FusionHDTV USB, AVStream Capture(DVB-T DUAL)” ,” FusionHDTV
USB, AVStream Capture(DVB-T DUAL)” drivers.

[DVB-T HOME]

Using this way, you may install “FusionHDTV, BDA Receiver(DVB-T)“, “FusionHDTV, Video
Capture(PAL) “, “FusionHDTV, WDM Crossbar(Tuner only), FusionHDTV, BDA Tuner (DVB-T Lite) “,”
FusionHDTV, WDM Tuner(DVB-T Lite)”drivers.




        All specifications and information are subject to changes without further notices              15
2.3.3       Checking the Windows XP driver
Right click the “My Computer” icon and select “properties” from the popup menu. Select Hardware-> Device
Manger. You must see following devices properly installed under the “Sound video and game controllers”.

 [ DVB-T Pro ]                                            [ DVB-T Dual Digital 4 ]




[ DVB-T HOME ]




 [ FusionHDTV 5 USB]                                              [ FusionHDTV 5RT Lite ]




[ FusionHDTV 5 RT GOLD ]                                          [ FusionHDTV 5 Express ]




** If a driver file look for, click the browse button. Select the driver directory under the installation directory
(ex : C:\Program Files\Dvico\FusionHDTV\driver) or Driver folder of installation CD.




             All specifications and information are subject to changes without further notices                  16
2.3.4 Checking the Windows 64bit Edition driver
Right click the “My Computer” icon and select “properties” from the popup menu. Select Hardware-> Device
Manger. You must see following devices properly installed under the “Sound video and game controllers”.
[ FusionHDTV DVB-T Pro ]

             FusionHDTV (unused device function)

             FusionHDTV (unused device function)

             FusionHDTV DVBT-PRO, Unified AVStream

[ FusionHDTV DVB-T DUAL DIGITAL 4 ]

             FusionHDTV USB, AVStream Capture (DVBT-DUAL)

             FusionHDTV USB, AVStream Capture (DVBT-DUAL)



[ FusionHDTV 5 USB]                                [ FusionHDTV 5 RT GOLD ]




[ FusionHDTV 5 Express ]




If you want to remove the x64 driver, You must remove the driver by "Control panel-Add or Remove
programs"




            All specifications and information are subject to changes without further notices        17
3     Hardware Installation
3.1    About the Board
[ DVB-T Dual-Digital 4 ]                                                     Power Up connector




               Air Antenna

                                                                            PME Jumper

                           IR Remote receiver




        Air Antenna: Connects to the terrestrial Digital signal.

        Remote receiver : Connect IR Remote receiver.

        PME Jumper : For the PME# option of power up.(Refer to chapter 3.3)

        Power Up connector : For the power up cable when PME is not available.



 [ DVB-T HOME ]




        Air Antenna
             Thru Pass Port
         Air Antenna: Connects to the terrestrial signal.

        Thru Pass Port : The Thru Pass mean that you can plug your antenna into the card and then
        another cable into the card to act as a repeater signal for another TV.


            All specifications and information are subject to changes without further notices     18
[ DVB-T Pro ]

                                                                                   Power Up connector
                                                                                         PME Jumper




                         Air Antenna




                                       Video –IN/                    Analog Audio Output Port
                                       Remote Receiver


       Air Antenna: Connects to the terrestrial signal (Digital & Analog).

       Video –IN/Remote receiver : For external video sources, Line-In and remote receiver.

       Analog Audio Output Port : For the audio of analog sources.

       PME Jumper : For the PME# option of power up.(Refer to chapter 3.3).

       Power Up connector : For the power up cable when PME is not available.



 [ FusionHDTV5 USB ]




         VIDEO-IN




                                                                                        Remote Receiver


                USB Port

                         Air Antenna


       USB Port : Connects USB 2.0 Port.

        Air Antenna: Connects to the terrestrial signal.( Analog TV is available windows XP service pack 1
        or above.)


           All specifications and information are subject to changes without further notices              19
           VIDEO-IN: For external video sources.

           FusionRemote Receiver

[FusionHDTV 5 RT Series , 5 Express ]

                                                           PME Jumper
                                     Analog Audio Output Port




                    Antenna                                                           Power Up connector



                                           VIDEO-IN
           Antenna: Connects to the terrestrial signal or cable

           VIDEO-IN: For external video sources. (5 RT gold only)

           Analog Audio Output Port : For the audio of analog sources (5 Express doesn’t support this port)

           Power Up connector : For the power up cable when PME is not available.

           PME Jumper : For the PME# option of power up.(Refer to chapter 3.3).




                    Line-in cable
                                                                    Remote receiver

  ** FusionHDTV 5 RT Lite is not supporting the external input like s-video or composite.

  ** FusionHDTV 5 Express don’t need the line-in or internal audio cable for external input.

3.2        Before Installation PCI card
Warning:

      1)   Before installing, first touch the grounded part of the PC to protect the components on the board
           from static electricity.

      2)   Before installing the board, the system’s power should be turned off. Installing the Board when the
           system’s power is “ON,” will damage the system or the Board and void your warranty.

      3)   Please remove the power cord from the PC.



               All specifications and information are subject to changes without further notices              20
3.3      Connecting Power UP cable
      We have 2 Power Up functions - the PME and power switch cable.

      If your mainboard supports the PME (Power Management Event) option, you can skip the ‘Connecting
      Power UP cable’ steps.

      We recommend that you enable Wakeup by PME# of PCI in bios-Power Management Setup. This
      option is different according to the bios manufacturer of the mainboard, so it is important to refer to the
      manual of the mainboard for the PME option. Please check if PME jumper has been done to PME side
      properly.

      If you want to change the bios setting, please press the DELETE key (AwardBios) as soon as you boot.
      (AMI Bios : F2 key)

      1) Shut down your computer and unplug main power cord.

      2) Remove the computer case cover.

      3) Locate the ATX power switch pins on your computer case
         and trace the wires to the power switch connector on your
         mainboard. The ATX power switch cable is normally a
         twisted pair of cables with a two-pin connector as shown in
         the picture below.



      < Note >

      On the mainboard, the ATX power switch pins are usually labeled
      “POWER SW” or something similar. It is vital to remember the
      position of these pins for a later step in the installation process.




      4) Unplug the ATX power switch cable from the mainboard and
         connect it to the connector named “Case Power Pin” on the
         FusionHDTV TV PCI Tuner Card, as shown in the picture
         below. And you need to change the PME jumper to SW




      The ATX power switch cable is not polarized. You can plug it in either
      direction.

      5) Connect the black socket of the Power Up power patch cable to
         the power switch connector on the mainboard.




      6) Connect the white socket of the Power Up cable to the connector
         named “M/B Power Pin” on the FusionHDTV PCI Tuner card.




              All specifications and information are subject to changes without further notices               21
    < Note >

    Please double check if everything has been done properly. If you plug the cables into an incorrect pin,
    your PC may not start or may function improperly.

    The location of PME jumper is different according to TV card model.

    [ DVB-T Pro ]




                                                                                                   M/B Power Pin

                                                                                                   Case Power Pin

                                                                                                        PME/SW Selector




    [ DVB-T DUAL Digital 4 ]


                                                                                                      M/B Power Pin

                                                                                                      Case Power Pin

          PME/SW Selector




                        PME/SW Selector                                                                         M/B Power Pin
                                                                                                                Case Power Pin




[ 5 RT GOLD, 5 Express]

                                                                                   M/B Power Pin
                                                                                   Case Power Pin

                                                                                   PME/SW Selector




[ 5 RT Lite ]

    - PME jumper used to PME# option in Bios.
    - S W jumper used to connecting the Power pin.

    ------------------------------------------------------------------------------------------------------------------------------------------

                All specifications and information are subject to changes without further notices                                          22
      << Note >>

      Connect the white end of the Power Up cable to the TV tuner card and the black end to the mainboard.

      Double check your work. If you plug the cables into the incorrect pins, your PC may not start or
      otherwise function improperly.

      If you don’t want to use Power Up Scheduling from the Windows Shutdown state, you can skip the
      power switch circuit connections. In other words, you can skip Power Up Connecting. You can still use
      scheduled recording from Standby mode or powered on state.

      Power Up will start your computer in advance of 5 minutes before the schedule time. If you set schedule
      on 4 o’clock, Power up will wake up your computer on 3:55. Therefore, you need to shut down the
      computer before 3:54 in order to let Power Up start the computer.

      This feature cannot logon your system When your account requires an your user name and password.
      So if you want to use Power Up Scheduling, you must have the auto logon account.

      ------------------------------------------------------------------------------------------------------------------------------------------

3.4        PCI Board Installation
      1)   Connect the analog audio output port to the sound card (CD-IN or Aux) for Video or composite.
           (DVB-T Plus only)

      2)   Insert the board by holding the top part of the board and push it until it completely locks into the slot.
           Fasten the screw on the bracket using a screw driver.




                                                                    Connect the Antenna input port to an antenna cable.

           If you have a DVB-T dual digital model, you may connect the USB port to external USB2.0 port or
           internal USB jumper on the mainboard.

[ Fusion USB ]                                                          [DVB-T HOME ]




                                                                                                                       Air Antenna
                                                                Thru Pass Port




Tip       After the board installation, when the power is on, the driver search message will appear. Please
refer to chapter 2 for driver Installation.


                 All specifications and information are subject to changes without further notices                                           23
3.5        Remote Installation
      1)   Connect the IR receiver
           module to the PC’s USB
           port (DVB-T Home). In
           case of RT series, please
           connect     the     remote
           receiver    to    enclosed
           converting cable.

      2)   If you have a converting
           cable, Firmly connect the
           remote      receiver      to
           converting cable’s IR port.

           If you have a DVB-T pro or DVB-T Dual Digital4, You may connect the IR receiver to the bracket.




      3)   After IR receiver and FusionHDTV remote software is installed, please reboot and start the
           configuration by right clicking the FusionRemote icon at the low right bottom of the screen. If you do
           see the FusionRemote icon in the tray, please start the program by Start->Program->DViCO-
           >FusionRemote.




      4)   Please select the port that IR receiver module is attached and press the any button on the remote
           transceiver. A Dialog box with the remote transceiver buttons will appear.




Tip        FusionRemote program will start
automatically when the PC is booted. You
can check the Fusion Remote program
availability at the Task Bar of Windows like
the picture below.




** In case of 5 RT GOLD or 5 Express,
please connect the remote receiver to
enclosed dongle cable.




               All specifications and information are subject to changes without further notices              24
4     Using FusionHDTV


Please check Http://www.FusionHDTV.co.kr for any updated software or manuals.


4.1     Starting and Quitting
Click Start, point to Program->DVICO->FusionHDTV, or double click on the FusionHDTV icon in the program
folder to execute FusionHDTV.

When you first execute the program, it will ask for a channel scan. Please say “Yes” for the channel scan.

By clicking     (Exit Button), the software is terminated.

4.2     Display setup
FusionHDTV Software composed with View panel and control panel.

4.2.1         Video Window
It shows the HDTV picture inside the window.

[ Single mode ]




[ PIP mode ]




               All specifications and information are subject to changes without further notices             25
If you click right on the video window, a popup menu will appear.




                                       Configuration: is used to configure the setting

                                       Show Controller: Show/Hide FusionHDTV’s controller.

                                       Show Outline: is used to show the outline of video window

                                       Show Channel Manager: Show/Hide channel manager.

                                       Recording Scheduler : is used to Reservation Record.

                                       Input Source: is used to change input source.

                                      Favorites Channel : Add your favorite programs into favorite list before
                                    watching them.

                                       Add to Favorite Channel.

                                       Display Size: Resize display.

                                       Aspect Ratio: Adjust display ratio.

                                       TV Analog De-interlacing: removes interlace to progressive conversion
                                    artifact.

                                       Analog Color inverse

                                       Analog TV multi Audio

                                       Always On Top: Shows FusionHDTV application always on top.

                                   Second language : Second language can be heard with checking
   "Audio > Second Language" option when it is available in digital broadcasting.

  Show WallPaper(ALT-W)

  Time-Shifting On/Off : Change Time-Shifting mode.

  MultiView : You can see all sub channel video on the single video screen.

  PIP : Change PIP on/off , toggle PIP program and select PIP TV tuner. If you have a single Tuner, you can
        see sPIP instead of PIP.

  Sleep Mode : Shut down the system or program when specified time while HDTV runs.

  Teletext On/Off : On/Off Teletext browser. (For DVD-T model)

  SubTitle On/Off (For DVD-T model)

  File Playback: Play input signal(or file).

  Stop : Change Stop.

  Help: Shows Help information.

  About..: Shows Program Information

  Exit: Quit FusionHDTV.




             All specifications and information are subject to changes without further notices             26
4.2.2          Controller
This indicates Control Buttons.

                                                                                            32 3 2 1
                                 7
   4
                                 6       10                                                   12
                       5
                                                            11
                        8                     9
 23                            22


  13      14    15     25 24             16       17   18   19 20 21      26     27     28 29 30 31


      1) Exit button

      2) Maximize button

      3) Minimize

      4) Channel UP/DOWN button

      5) Show Input source.

      6) Channel/Input button: This mode shows the channel number. If you click on the small channel
         sub number(2), it will show the channel list and sub channel name.

      7) Video/Audio status

      8) Show program name.

      9) Show signal strength : you can toggle to current time in the configuration-display-show as hh:mm:ss.

      10) Time: Total elapsed time played.

      11) Expand menu button : shows the expand menu.

      12) Volume: Shows and controls the current volume level.

      13) EPG button: Show present/following EPG.

      14) LiveTV button: Changes to live TV mode. When the time-shifting is OFF, this button operates with
          time-shifting.

      15) Input button: is used to select input signal.

      16) Cut Edit button: is used to edit a recorded file. This button is used the A-B Repeat function when the
          time-shifting.

      17) Mark in button: Mark in the start point where the cut starts.

      18) Mark out button: Mark in the end point where the cut ends.

      19) Open file button: is used to open recorded files.

      20) Slow Rewind button

      21) Slow Fast Forward button

      22) Time moving slider: Shows location currently playing. If you drag it with the mouse, you can move
          anywhere in the white line.

      23) Time moving Bar: Is used to drag the slider bar.


               All specifications and information are subject to changes without further notices             27
    24) Teletext button: You can show the real time teletext browser. ( DVB-T model only)

    25) PIP button : is used to show the PIP screen. This button is available with dual digital or multi card.



  PIP controller : Dual digital model or multi-card

If you click the PIP button, you can see PIP controller.

    26) Select PIP channel.

    27) Select PIP channel list : is used to change the PIP channel.

    28) PIP Position : left bottom, left top, right bottom, light top

    29) PIP size :   small, normal, large

    30) Toggle PIP program. : is used to swap the main channel and PIP channel.

    31) PIP record. : is used to record the PIP channel while recording of main channel. If you have a single
        tuner, you cannot see PIP record button.

    32) Configuration/HELP

  Basic controller

                                         1     2      3    4     5      6   7




                                               8      9    10   11 12       13

    1) Start button: Is used to go to the first scene.

    2) End button: Is used to go to the end of a scene.

    3) Review button: Is used to search backward.

    4) FF button: Is used to search forward.

    5) Pause button: Is used to pause playing or replay.

    6) Playback button: Is used to play an input signal (or file).

    7) Stop button

    8) Time-Shifting Button.

    9) Favorites Channel : Add your favorite programs into favorite list before watching them.

    10) Snapshot button: Is used for still image capture.

    11) Instant Replay button: goes 10 sec backward by default. You can configure the instant replay time in
        the configuration menu.

    12) Record button : is used to configure the direct-record without dialog box in the configuration menu.

    13) Mute button: Mute ON/OFF.

If you drag the mouse to the left bottom, window controller will be shown.

  Windows controller




             All specifications and information are subject to changes without further notices                   28
4.3     Using FusionRemote
* Optional FusionHDTV remote transceiver.

This indicates Remote Buttons.

4.3.1 Using For FusionHDTV
[ Fusion MCE Remote ]



                WinAMP start                                                      PowerDVD start



                                                                                  User profile
             FusionHDTV start

                                                                                   Start Profile
                Configuration
                                                                                   EPG

              Previous Channel                                                    Change Input

                                                                                   Direction/Enter
             MCE DVD MENU
                                                                                  Alt-Tab

                Instant replay                                                    Instant forward




             Volume Up/Down                                                       Channel Up/Down


                                                                                  MCE start/Exit
                                                                                   File Open
                   Snapshot
                                                                                   DTV/ATV or LiveTV



                                                                                  Numeric Key




                  Aspect ratio                                                     Display Size toggle
                 PLAY/PAUSE

                      Rewind                                                       Fast Forward


                       MUTE                                                        Record

                     PC OFF                                                        STOP




** FusionHDTV DVB-T Pro , Dual Digital 4 or ATSC RT series is available the Power Up function.
Turn ON or OFF your PC like you do your TV. With multifunctional remote control you will be able to boot
your PC from a distance. Not only does it provide perfect control of all HDTV functions you will also be able
to control Windows MCE 2005 and many other application programs with this multifunctional remote control.


            All specifications and information are subject to changes without further notices             29
 [ Fusion USB Remote ]




                              1               1) HDTV button: Start or Exit FusionHDTV program.

                                              2) ~ 11) numberic button
      2       3          4    13
                                              12) Back Channel button.
       5      6          7    12
                                              13) Mute button
       8      9         10    11
                                              14) Snapshot button: is used for still image capture.

                   15                         15) Volume UP button
       14                    16
                                              16) Record button.
      17           18         19              17) Volume DOWN button

                                              18) Play/Pause button: is used to pause playing or replay
       20          21        22
                                              19) Volume UP button.
       23          24        25               20) Review button: is used to search backward

                                              21) Channel DOWN button.
       26     27        28   29
                                              22) FF button: Is used to search forward.
       30     31        32   33
                                              23) Configuration button: show FusionHDTV Configuration.
       34     35             36
                                              24) Stop button

                                              25) Playback button: Is used to play an input signal (or file).

                                              26) EPG button: Show present/following EPG.

                                              27) Aspect Ratio button: Change Aspect Ratio(16:9 >4:3).

    28) Fullscreen button: Show Fullscreen.

    29) Minimize button

    30) Profile button: You can have different profile for each application programs you want to use with the
        remote controller.

    31) ATV/DTV button: Changes to live TV mode.

    32) Input button: repeat S-VHS – VIDEO – Tuner

    33) Instant Replay button: goes 10 sec backward by default. You can configure the instant replay time in
        the configuration menu.

    34) Windows button: Change Windows

    35) FOCUS button: move to FusionHDTV Controller.

    36) PC OFF button.



You can use Fusion Remote as the simple replacement of the keyboard. Press the profile button on the
remote transceiver for customizing the remote transceiver keys for the program you selected.




            All specifications and information are subject to changes without further notices                   30
4.4    FusionHDTV Shortcut Key

      Shortcut Key                               Explanation
      F1                                         HELP
      A+Numeric                                  Analog Channel
      D+Numeric                                  Digital Channel
      ALT+F4                                     Exit.
      ALT+E                                      DVB-T EPG
      ALT+I                                      Analog color inverse
      ALT+K                                      Sleep function
      ALT+P(P)                                   Picture in Picture On/Off
      ALT+Q                                      Toggle PIP program
      ALT+S                                      SubTitle On/Off
      ALT+T (T)                                  Time-Shifting On/Off
      ALT+W (W)                                  Show WallPaper
      ALT+X                                      TeleText On/off
      Page Up                                    Fast Foward (FF)
      Page Down                                  Rewind (REW)
      Backspace                                  Instant Replay.
      Shift+ Backspace                           Instant Jump
      ALT+Enter                                  Fullscreen.
      CTRL+Space                                 Mute.
      CTRL+B (B)                                 Repeat all Aspect ratio
      CTRL+C (C)                                 16:9,4:3,4:3 Pan & Scan toggle
      CTRL+D                                     DVHS Mode
      CTRL+E (E)                                 Recording Scheduler.
      CTRL+F (F)                                 File open.
      CTRL+H                                     Edit favorite channel list .
      CTRL+I (I)                                 Snapshot .
      CTRL+L (L)                                 LIVE TV.
      CTRL+M (M)                                 Configuration.
      CTRL+O (O)                                 Go to previous Channel
      CTRL+P                                     Input Source
      CTRL+R (R)                                 Manual record.
      CTRL+S (S)                                 Stop.
      CTRL+T                                     Always on TopTV.
      CTRL+F6 (F6)                               Hide Controller..
      UP                                         Channel UP.
      DOWN                                       Channel DOWN.
      RIGHT                                      Volume UP..
      LEFT                                       Volume DOWN.
      SPACE                                      File : Pause <-> Play / Live : Play
      INSERT/DELETE                              Insert/Delete the analog channel
      F7                                         Slow Rewind (-0.8X /-0.5X /-0.2X /-1X of speed)
      F8                                         Slow Fast Forward (0.8X /0.5X /0.2X /1X of speed)
      V                                          Show sub channel multi-View




            All specifications and information are subject to changes without further notices        31
5   Technical Support
Contact Us

    If you have attempted to resolve any problems with your FusionHDTV and still require
    assistance, contact us by My Q/A at www.FusionHDTV.co.kr/Eng

    Please visit our WEB (http://www.fusionhdtv.co.kr/Eng) and check the enriched FAQs and much more.
    And please sign-up and let Dvico support you better.

    If you sign up, you will get:

    1) Automatic emailing of FusionHDTV latest update news, tips & techiques.
    2) You can place questions & requests at your own "MyQA" section. (Hidden from others)
    3) Prompt and quick response to your questions & requests.
    4) Your questions, comments and our responses will be maintained at this WEB.
    5) Automatic email response to your questions as soon as we respond at this WEB.

    You can also see our technical support page on our website at :
    http://www.fusionhdtv.co.kr/ENG/Download/SoftwareDVBT.aspx
    Where driver updates will be posted and available for download.




             All specifications and information are subject to changes without further notices          32

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:330
posted:4/28/2010
language:English
pages:32