Docstoc

DocuPrint C1110 For Users Who Purchased the Network Expansion Card

Document Sample
DocuPrint C1110 For Users Who Purchased the Network Expansion Card Powered By Docstoc
					DocuPrint C1110
     For Users Who Purchased the




                                                                                                                        English
     Network Expansion Card
     (Optional)
         Thank you for purchasing the network expansion card.
         This guide is intended for first-time users of the printer and gives instructions on installing
         this product to the printer.
         To ensure safe operation of the printer, be sure to read "Safety Notes" in the User Guide
         before starting the installation.

         Important
         • Before plugging or unplugging the interface cable connector, be sure to switch off the printer or unplug
           the power cord from the power outlet. Plugging or unplugging the connector when the printer is on can
           cause printer failure.
         • If installing the network expansion card to the printer when the printer is used in a network environment,
           the entire network-related settings will be initialized to the defaults. Before installing the network
           expansion card, we suggest you to record the current settings by printing out the [Printer Settings] list.
           Refer to the User Guide on how to print the [Printer Settings] list.


Checking the Package Contents
         The packaging box contains the following items. If you find any items missing, please
         contact our Customer Support Center or your dealers.


          • Network expansion card                                 • 2 screws




                                                                   • This guide




                                                                                                                    1
Installation Procedure
          The network expansion card goes into the controller board right above additional memory
          (optional). If you purchased additional memory, install it before installing the network
          expansion card. For information on how to install additional memory to the printer, refer to
          the User Guide.




          Network
          expansion card
                                                                        Additional memory




          Follow these steps when installing the network expansion card to the printer.

          1.   Switch the power off by pressing the power
               switch located on the left side of the printer
               to the <O> position.
               Unplug the power cord from the power
               outlet and the printer.




          2.   Loosen the screw on the rear cover of the
               printer and open the cover.




          3.   Remove the rear cover from the printer by
               pulling out the bottom tab of the cover from
               the slot, tilting the cover, and pulling out the
               top tab of the cover from the slot.




2
4.   Remove the black plastic part (used for the
     wireless LAN) from the network expansion
     card.




                                                                                          English
Important
• Remove the black plastic part from the network
  expansion card before installing the card to the pritner.
  Otherwise, the rear cover cannot be closed.
• The black plastic part cannot be removed after the
  network expnasion card is installed to the printer.
  Make sure to remove the part in this step.


5.   Align the connector of the network                       connector
     expansion card with the card connector and
     insert the card into the connector.
     Use the following procedure since the
                                                                          connector
     opening on the printer is narrow.
     1) Insert the left side of the card at an angle
        into the opening on the printer.
     2) Insert the right side of the card into the
        opening and align the connector of the
        network expansion card with the card
        connector.
     3) Push the network expansion card by the
        part shown in the figure and firmly insert
        it into the connector.




6.   Check the following to ensure that the
     connector of the network expansion card is
     inserted correctly.
     • There is no clearance gap between the
       connector of the network expansion card
       and the card connector.
     • The two screw holes are aligned with the
       alignment holes when you see them from
       the outside of the printer.




                                                                                      3
    7.   Secure the card onto the controller board
         by tightening the two screws (supplied)
         from the outside of the printer.




    8.   Re-attach the rear cover on the printer by
         inserting the top tab and then bottom one of
         the cover into the slots. Then, close the rear
         cover and tighten the screw loosened in
         Step 2.




    9.   Plug in the power cord and switch the power on by pressing the power switch to the
         <|> position.


    The installation is now complete.

    Note
    • You can check whether the network expansion card has been installed correctly by printing out the
      [Printer Settings] list. Refer to the User Guide on how to print the [Printer Settings] list.




4

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:6
posted:4/27/2010
language:English
pages:4
Description: DocuPrint C1110 For Users Who Purchased the Network Expansion Card ...