Oil Recycling Pot 1 -5L (Porcelain Enamel) by lindayy

VIEWS: 10 PAGES: 1

More Info
									Oil Recycling Pot 1-5L (Porcelain Enamel)
Materials
POT: Porcelain Enamel
Porcelain Enamel
FILTER: Stainless Steel
FRAME: Stainless Steel
HANDLE: Plastic
LID KNOB: Plastic
LID KNOB
LID
LID:
MESH
FILTER
FRAME FOR
CARBON
CARTRIDGE
(Xv'. ,,
Size
1.5 L
CARBON
CARTRIDGE
\
HANDLE
Accessory
Carbon Cartridge x 1
Carbon: Wooden Activated Charcoal
Container: Non-woven Cloth
POT
[
Oil Recycling Pot Instructions for use:
-	Do not place the Oil Pot on direct heat and keep it away from open flame or other heat sources.
-	Pour the oil from the Recycling pot into a cold saucepan or pot, prior to heating.
-	Place the recycling pot on a flat surface prior to filling it with used oil. Oil is easily poured when its
temperature is around 150°C. At that point, please keep the level of oil below the mesh filter.
-	Always take care when using heated oil.
-	The recycling pot contains an outer layer of glass, avoid dropping or using force to avoid cracks in the outer layer.
-	Wash the pot using detergent and a sponge. Avoid using hard scrubbing brushes.
Instruction for Using Carbon Cartridge:
-	Do not open the package until ready for use.
-	Do not wash the cartridge.
-	Depending on the quality of the oil, the cartridge can be used for approximately 10 filters.
-	Old oils consisting of a darker colon and greasy smell can not be filtered.
-	When filtering through cartridge, please wait till the oil temperature gets as low as 150°C.
(If the oil temperature is too low, it takes more time to finish filtering.)
-	Please filter the oil every time after use.
-	The cartridge will need to be replaced if more than a few months old.
-	A new cartridge will absorb more oil which may result in less oil being filtered through.
-	Used cartridges can be disposed as compost.

								
To top