Docstoc

Lock Focus Products - Wooden Furniture Locks

Document Sample
Lock Focus Products - Wooden Furniture Locks Powered By Docstoc
					Lock Focus is committed to supplying
custom-built and custom-keyed quality
products in the wooden furniture range.




                         lockf@lockfocus.com.au
                         www.lockfocus.com.au

  Wooden
  Furniture Locks
      furniture



                              Lock Focus Pty Ltd
                                          A member of the GUD Group
    www.lockfocus.com.au                   lockf@lockfocus.com.au                      Wooden Furniture Locks

BACK FIXING CAM LOCK




                                                                                                                             A member of the GUD Group
                                                                                                                             ABN 37 004 930 385
                                                                                                                                                         LOCK FOCUS PTY LTD
FOR DRAWERS AND CUPBOARDS
Applications
This lock is ideal for use on drawers and doors.

Rotating the key results in 90º or 180º rotary cam
movement.

The lock fits into a 19.1 mm diameter hole, from the
rear of a panel. Screws then secure the lock from the
back.

Suits panels up to 19 mm thick.

Specifications
     Zinc alloy diecast housing
     Single-entry keying - 01 and 02
                                                                                           A/CB20
     Double-entry keying - 07, 08, 17 and 18
     Key removable in locked and unlocked positions
                                                                         Dimensions/Fixing shown NTS
     Zinc-plated steel cam
     Stainless steel capped barrel
                                                                                    16,0
     Optional bezel.
     Refer to page B101
     One pair of nickel-plated keys per lock                                                        ø4,0 fixing
                                                                                                    holes countersunk
                                                                                                    from rear
Code Information
                                                                19,0




KEY SERIES
01   200 combinations - non-master keying
02   200 combinations - master keying                                               32,0
07   500 combinations - non-master keying
                                                                                    42,0
08   500 combinations - master keying
17   2000 combinations - non-master keying
18   2000 combinations - master keying
                                                                                2,0 cam
FINISH
                                                                               thickness                    32,0
3    Bright chrome                                                     2,0 flange
9    Nickel                                                            thickness
MOVEMENT                                                                20,0
B    180º clockwise or anti-clockwise to unlock
C    90º clockwise to unlock
                                                        ø19,0




FIXING                                                                                                      ø19,1
-    Customer to supply                                                                                      Min.
                                                                          24,0
CAM TYPE                                                                                               Fixing Details
                                                                            31,8                      Note: fixing hole
- - Refer to page B100                                                                              ø20,0 if bezel is used


Ordering Details                                                           Measurements shown in mm


STEP 1       STEP 2           STEP 3                   STEP 4
A / CB20 / KEY SERIES / FINISH + MOVEMENT / - + CAM TYPE
Ordering example: A / C B 2 0 / 0 2 / 3 B / - 0 4                                                             12
    ADVISE     Cam position when locked, refer to drawing at right
                                                                                                        9            3
    ADVISE     Keying requirements, e.g. keyed alike
                                                                                                               6


                                                                                                                    B1
                                                     www.lockfocus.com.au                  lockf@lockfocus.com.au                Wooden Furniture Locks

                                                 BACK FIXING CAM LOCK
LOCK FOCUS PTY LTD
                     A member of the GUD Group
                            ABN 37 004 930 385



                                                 COIN/SQUARE DRIVE OPERATED
                                                 Applications
                                                 These products suit doors, drawers and access
                                                 panels.

                                                 A coin or square budget key is used to rotate the
                                                 cam 180º.


                                                 Specifications
                                                      Zinc alloy diecast housing
                                                      Coin operation/budget key
                                                      Zinc-plated steel cam
                                                      Stainless steel capped barrel coin-operated only
                                                                                                                                 A/CB20/8S


                                                 Code Information                                                  Dimensions/Fixing shown NTS

                                                 KEY SERIES

                                                 CO Coin operated
                                                 8S Square drive

                                                 FINISH

                                                 1    Zinc plate (8S drive)
                                                 3    Bright chrome - coin-operated

                                                 FIXING

                                                 -    Customer to supply

                                                 CAM TYPE

                                                 - - Refer to page A100
                                                                                                                           2,0 cam
                                                                                                                          thickness
                                                                                                                                                       32,0
                                                                                                                 2,0 flange
                                                                                                                 thickness

                                                                                                                   20,0
                                                                                                         ø19,0




                                                                                                                                                      ø19,1
                                                                                                                                                       Min.
                                                                                                                     24,0
                                                                                                                                                  Fixing Details
                                                                                                                       31,8                    Note: fixing hole
                                                                                                                                             ø20,0 if bezel is used




                                                 Ordering Details                                                    Measurements shown in mm

                                                 STEP 1          STEP 2            STEP 3                  STEP 4
                                                 A / C B 2 0 / KEY SERIES / FINISH + MOVEMENT / FIXING + CAM TYPE
                                                 Ordering example: A / C B 2 0 / C O / 3 B / N 0 4                                                   12
                                                     ADVISE       Cam position when locked, refer to drawing at right
                                                                                                                                              9               3

                                                                                                                                                      6



                                                 B2
    www.lockfocus.com.au                   lockf@lockfocus.com.au                  Wooden Furniture Locks

MULTI-DRAWER CAM LOCK




                                                                                                                                 A member of the GUD Group
                                                                                                                                 ABN 37 004 930 385
                                                                                                                                                             LOCK FOCUS PTY LTD
BACK FIXING
Applications
This lock is ideal for use on multi -drawers.

Rotating the key results in 180º rotary cam movement
and 13 mm throw.

The lock fits into a 19.1 mm diameter hole, from the
rear of a panel. Screws then secure the lock from the
back.

Suits panels up to 19 mm thick.


                                                                                    A/CB2D
Specifications
     Zinc alloy diecast housing
     Single-entry keying - 01 and 02
     Double-entry keying - 07, 08, 17 and 18
     Key removable in locked and unlocked positions
                                                                       Dimensions/Fixing shown NTS
     180º movement - 13 mm throw
     Zinc alloy die cast cam - clear zinc finish
     Stainless steel capped barrel
     Optional bezel - refer to page B101                                                       44,0

     One Pair of nickel-plated keys per lock.                              20,0            2,0 flange
                                                                                           thickness




                                                                                                                        ø6,0
Code Information
                                                               ø19,0




KEY SERIES
01   200 combinations - non-master keying                                   24,0     7,0                  6,5
02   200 combinations - master keying
07   500 combinations - non-master keying                                              64,0
08   500 combinations - master keying
17   2000 combinations - non-master keying
18   2000 combinations - master keying
FINISH                                                            ø4,5 fixing holes countersunk                 32,0
                                                                             from rear
3    Bright chrome
9    Nickel
                                                        19,0




MOVEMENT
B    180º clockwise to unlock
CAM TYPE                                                                 32,0
                                                                                                                ø19,1
D1 Die cast                                                              42,0                                    Min.
P3 Plastic                                                                                              Fixing Details
                                                                                                          Note: Fixing hole
                                                                                                        ø20,0 if bezel is used


Ordering Details                                                        Measurements shown in mm


STEP 1      STEP 2          STEP 3               STEP 4
A / CB2D/ KEY SERIES / FINISH + MOVEMENT / - + D1
Ordering example: A / C B 2 D / 0 2 / 3 B / - D 1
    ADVISE    Cam position when locked, refer to drawing at right                                                12

    ADVISE    Keying requirements, e.g. keyed alike

                                                                                                                 6



                                                                                                                           B3
                                                     www.lockfocus.com.au                     lockf@lockfocus.com.au              Wooden Furniture Locks

                                                 MULTI-DRAWER CAM LOCK
LOCK FOCUS PTY LTD
                     A member of the GUD Group
                            ABN 37 004 930 385



                                                 BACK FIXING - SINGLE FLANGE

                                                 Applications
                                                 This lock is ideal for use on multi -drawers where
                                                 there are space limitations.

                                                 Rotating the key results in 180º rotary cam movement
                                                 and 13 mm throw.

                                                 The lock fits into a 19.1 mm diameter hole, from the
                                                 rear of a panel. One screw then secures the lock from
                                                 the back.

                                                 Suits panels up to 19 mm thick.
                                                                                                                                           A/CB2S
                                                 Specifications
                                                      Zinc alloy diecast housing
                                                      Single-entry keying - 01 and 02
                                                      Double-entry keying - 07, 08, 17 and 18                        Dimensions/Fixing shown NTS
                                                      Key removable in locked and unlocked positions
                                                      180º movement - 13 mm throw
                                                      Zinc alloy die cast cam - clear zinc finish                                           44,0

                                                      Stainless steel capped barrel                                     20,0            2,0 flange
                                                      Optional bezel - refer to page B101                                               thickness




                                                                                                                                                                      ø6,0
                                                      One pair of nickel-plated keys per lock.
                                                                                                            ø19,0




                                                 Code Information
                                                                                                                         24,0     7,0                6,5
                                                 KEY SERIES
                                                 01   200 combinations - non-master keying                                          64,0
                                                 02   200 combinations - master keying
                                                 07   500 combinations - non-master keying                                                                 16,0
                                                 08   500 combinations - master keying
                                                 17   2000 combinations - non-master keying
                                                 18   2000 combinations - master keying
                                                 FINISH                                                                ø4,5 fixing holes
                                                                                                                    countersunk from rear
                                                 3    Bright chrome
                                                 9    Nickel
                                                 MOVEMENT                                                                                                     ø19,1
                                                                                                                                                               Min.
                                                 B    180º clockwise to unlock
                                                                                                             16,0                                     Fixing Details
                                                 CAM TYPE
                                                                                                                                                       Note: Fixing hole
                                                                                                              30,8                                   ø20,0 if bezel is used
                                                 D1 Die cast
                                                 P3 Plastic




                                                 Ordering Details                                                      Measurements shown in mm

                                                 STEP 1       STEP 2           STEP 3               STEP 4
                                                 A / CB2S / KEY SERIES / FINISH + MOVEMENT / - + D1
                                                 Ordering example: A / C B 2 S / 0 2 / 3 B / - D 1
                                                                                                                                                                  12
                                                     ADVISE     Cam position when locked, refer to drawing at right
                                                     ADVISE     Keying requirements, e.g. keyed alike
                                                                                                                                                                  6


                                                 B4
    www.lockfocus.com.au                   lockf@lockfocus.com.au       Wooden Furniture Locks

HAMPER/TAMBOUR DOOR LOCK




                                                                                                  A member of the GUD Group
                                                                                                  ABN 37 004 930 385
                                                                                                                              LOCK FOCUS PTY LTD
Applications
This lock is ideal for use on overhead hampers.

Rotating the key clockwise results in 180º rotary cam
movement.

The lock fits into a 19.1 mm diameter hole, from the rear of
a panel. Screws then secure the lock from the back.

Suits panels up to 19 mm thick.

Refer to Applications Section H, page H2.




                                                                        A/CB2V WITH
Specifications                                                            P6 CAM

     Zinc alloy diecast housing
     Glass-reinforced nylon cam
     Glass-reinforced strike                                   Dimensions/Fixing shown NTS
     Stainless steel capped barrel
     Key removable in locked and unlocked positions
     Optional bezel - refer to page B101




Code Information
KEY SERIES
01   200 combinations - non-master keying
02   200 combinations - master keying
07   500 combinations - non-master keying
08   500 combinations - master keying
17   2000 combinations - non-master keying
18   2000 combinations - master keying
FINISH
3    Bright chrome
MOVEMENT
B    180º clockwise or anti-clockwise to unlock




Ordering Details                                                Measurements shown in mm

STEP 1      STEP 2             STEP 3          STEP 4
A / CB2V / KEY SERIES / FINISH + MOVEMENT / - P 6 (Vertical mount)
A / CB20 / KEY SERIES / FINISH + MOVEMENT / - P 6 (Horizontal mount)
Ordering example: A / C B 2 V/ 0 2 / 3 B / - P 6
    ADVISE     Cam position when locked
    ADVISE     Keying requirements, e.g. keyed alike

                                                                                             B5
                                                     www.lockfocus.com.au                     lockf@lockfocus.com.au                   Wooden Furniture Locks

                                                 CAM LOCKS
LOCK FOCUS PTY LTD
                     A member of the GUD Group
                            ABN 37 004 930 385



                                                 22 MM AND 32 MM HOUSINGS
                                                                                                               Similar product available
                                                 Applications
                                                 This lock is ideal for use on drawers and cupboards.                         Click Here!
                                                 Rotating the key results in 90º or 180º rotary cam
                                                 movement.

                                                 The lock fits into a 19.1 mm diameter hole from the
                                                 front of a panel. A brass nut and pronged washer
                                                 secure the lock into position.

                                                 The CR22 suits panels up to 16 mm thick and the
                                                 CR32 up to 27 mm thick.

                                                                                                                                                                A/CR32
                                                 Specifications
                                                      Zinc alloy diecast housing
                                                      Key removable in locked and unlocked positions
                                                      Zinc-plated steel cam
                                                      Stainless steel capped barrel                                             A/CR22
                                                      One pair of nickel-plated keys per lock
                                                      Note: As the nut will not slip over the cam, supply in
                                                      knock down condition is available.                                  Dimensions/Fixing shown NTS

                                                                                                                  2,0 cam                             2,0 cam
                                                 Code Information                                                thickness                           thickness
                                                                                                                        22,3                              32,0
                                                 KEY SERIES
                                                 01 200 combinations - non-master keying -                              4,3                          4,3
                                                    22 mm and 32 mm
                                                 02 200 combinations - master keying
                                                 ES 50 combinations - 96000 series - sub master keying -
                                                    22 mm and 32 mm
                                                 11 2000 combinations - non-master keying -
                                                    22 mm and 32 mm                                                  16,0
                                                 12 2000 combinations - master keying -                              Max.                              27,0
                                                                                                                                                       Max.
                                                    22 mm and 32 mm
                                                                                                                              29,9                          39,6
                                                 CL 32 mm only
                                                 07 500 combinations - non-master keying - 32 mm only                 CR22                               CR32
                                                 08 500 combinations - Master keying - 32 mm only                 (22 mm long                        (32 mm long
                                                 17 2000 combinations - non-master keying - 32 mm only              housing)                           housing)
                                                 18 2000 combinations - Master keying - 32 mm only
                                                                                                                 16,0
                                                 FINISH                                                                                                         16,6 Min.
                                                                                                                                         ø19,1
                                                 3    Bright chrome
                                                                                                                                          Min.
                                                 MOVEMENT
                                                 B    180º clockwise or anti-clockwise to unlock
                                                 C    90º clockwise to unlock (45º mounting required)
                                                 FIXING
                                                 N Nut - Metal fixing only
                                                 W Nut and pronged washer - wooden fixing only                                                       ø19,1
                                                                                                                 ø22,2                                Min.
                                                 CAM TYPE
                                                                                                                                     Wooden Fixing             Metal Fixing
                                                 - - Refer to page B100

                                                 Ordering Details                                                             Measurements shown in mm

                                                 STEP 1      STEP 2               STEP 3                  STEP 4
                                                 A / CR22 / KEY SERIES / FINISH + MOVEMENT / FIXING + CAM TYPE (22 mm housing)
                                                 A / CR32 / KEY SERIES / FINISH + MOVEMENT / FIXING + CAM TYPE (32 mm housing)
                                                                                                                                                                  12
                                                 Ordering example: A / C R 2 2 / 0 1 / 3 B / W 0 4
                                                     ADVISE     Cam position when locked, refer to drawing at right                                        9                3
                                                     ADVISE     Keying requirements, e.g. keyed alike
                                                     ADVISE     If lock is to be supplied unassembled (knocked down)                                               6


                                                 B6
    www.lockfocus.com.au                     lockf@lockfocus.com.au                  Wooden Furniture Locks

LOCKER AND CUPBOARD LOCK




                                                                                                                               A member of the GUD Group
                                                                                                                               ABN 37 004 930 385
                                                                                                                                                           LOCK FOCUS PTY LTD
22 MM NOZZLE LENGTH
Applications

This lock is ideal for use on lockers and cupboards.

Rotating the key 360º results in 6.4 mm bolt movement.

The lock fits into a 16 mm diameter hole from the rear of
a panel. Screws then secure the lock from the back.

Suits panels up to 22 mm thick.


Specifications

     Zinc alloy diecast housing - natural finish
                                                                                      A/PN22
     Pressed steel back plate - passivated - back plate
     held on by two removable screws
                                                                        Dimensions/Fixing shown NTS
     Zinc alloy diecast bolt - natural finish
     Zinc alloy diecast barrel - natural finish                           6,4                   43,0
     Key removable in locked and unlocked positions                     throw
     One pair of nickel-plated keys per lock


Code Information




                                                                                                                 66,7
KEY SERIES
                                                                              18,3




ZL 1800 combinations - master keying
FINISH
O    Zinc
MOVEMENT
-    360º clockwise to unlock
                                                                                     ø6,0
FIXING
                                                                 14,3     22,2
- - Customer to supply
                                                                                      ø15,9
                                                          38,0




                                                                                                                        Min.
                                                                                              57,2




                                                                                                                        16,0




                                                                        6,9
                                                                 6,4                                 Fixing Details


Ordering Details                                                          Measurements shown in mm


STEP 1      STEP 2 STEP 3 STEP 4
A / P N 2 2 / Z L / 0 - / - - -
Ordering example: A / P N 2 2 / Z L /0 - / - - -
    ADVISE    Keying requirements, e.g. keyed alike


                                                                                                                        B7
                                                     www.lockfocus.com.au                   lockf@lockfocus.com.au                         Wooden Furniture Locks

                                                 DRAWER LOCK
LOCK FOCUS PTY LTD
                     A member of the GUD Group
                            ABN 37 004 930 385



                                                 19 MM AND 22 MM NOZZLE LENGTHS
                                                 Applications
                                                 This lock is ideal for use on drawers.

                                                 Rotating the key 180º results in 9 mm vertical bolt
                                                 movement.

                                                 The lock fits into a 19.1 mm diameter hole from the
                                                 rear of a panel. Screws then secure the lock from the
                                                 back.



                                                 Specifications
                                                      Zinc alloy diecast housing
                                                      Single-entry keying - 01 and 02
                                                      Double-entry keying - 07, 08, 17 and 18                                                   A/PB1V

                                                      Key removable in locked and unlocked positions
                                                      Pressed steel back plate - passivated
                                                                                                                      Dimensions/Fixing shown NTS
                                                      Vertical bolt operation
                                                      Zinc-plated steel bolt




                                                                                                                                        throw
                                                      Stainless steel capped barrel

                                                                                                                                          9,0
                                                      Optional bezel - refer to page B101                                                         16.0
                                                      One pair of nickel-plated keys per lock                                                                    Top of
                                                                                                                                                                 drawer
                                                                                                                    when using
                                                                                                                      ‘R’ bolt




                                                 Code Information
                                                                                                                       28,0




                                                                                                                                                                 ø3,5
                                                                                                                                                                 hole
                                                 KEY SERIES - PB1V 19 mm (suits 16 mm board)
                                                 01 200 combinations - non-master keying
                                                                                                                           12,5




                                                 02 200 combinations - master keying
                                                 KEY SERIES - PB2V 22 mm (suits 19 mm board)                                                      27,0
                                                 01   200 combinations - non-master keying
                                                 02   200 combinations - master keying                                                            35,0
                                                 07   500 combinations - non-master keying
                                                 08   500 combinations - master keying
                                                 17   2000 combinations - non-master keying                                       2,0
                                                 18   2000 combinations - master keying
                                                                                                                                    1,8
                                                 FINISH                                                          19,0 (PB1V)                                     27,0
                                                 3    Bright chrome                                              22,0 (PB2V)
                                                 9    Nickel
                                                 MOVEMENT
                                                 B    180º clockwise or anti-clockwise to unlock                                                                ø19,1
                                                                                                         ø19,0




                                                 BOLT PROJECTION                                                                                                 Min.
                                                 R    Round face                                                                                            Fixing Details
                                                 F    Flat face                                                                                          Note: fixing holes ø20,0
                                                                                                                         5,0
                                                 BOLT TYPE                                                                                                   if bezel is used
                                                 - - Refer to page B101


                                                 Ordering Details                                                       Measurements shown in mm

                                                 STEP 1       STEP 2           STEP 3                      STEP 4
                                                 A / PB1V / KEY SERIES / FINISH + MOVEMENT / - BOLT PROJECTION + BOLT TYPE (19 mm nozzle)
                                                 A / PB2V / KEY SERIES / FINISH + MOVEMENT / - BOLT PROJECTION + BOLT TYPE (22 mm nozzle)
                                                 Ordering example: A / P B 1 V / 0 1 / 3 B / - R R
                                                     ADVISE     Keying requirements, e.g. keyed alike


                                                 B8
    www.lockfocus.com.au                    lockf@lockfocus.com.au                              Wooden Furniture Locks

CUPBOARD LOCK




                                                                                                                                    A member of the GUD Group
                                                                                                                                    ABN 37 004 930 385
                                                                                                                                                                LOCK FOCUS PTY LTD
19 MM AND 22 MM NOZZLE LENGTHS
Applications
This lock is ideal for use on cupboards.

Rotating the key 180º results in 9 mm horizontal bolt
movement.

The lock fits into a 19.1 mm diameter hole from the rear
of a panel. Screws then secure the lock from the back.
                                                                                                               A/PB1R

Specifications
     Zinc alloy diecast housing
     Single-entry keying - 01 and 02
     Double-entry keying - 07, 08, 17 and 18
     Key removable in locked and unlocked positions
     Pressed steel back plate - passivated
     Horizontal bolt operation
     Zinc-plated steel bolt                                                        A/PB1L
     Stainless steel capped barrel
     Optional bezel - refer to page B101
     One pair of nickel-plated keys per lock                                     Dimensions/Fixing shown NTS


Code Information
KEY SERIES - PB1L and PB1R 19 mm                               ø3,5 fixing
01 200 combinations - non-master keying                holes countersunk from rear                   Edge of
02 200 combinations - master keying                                                                 cupboard
                                                                                                      door
KEY SERIES - PB2L and PB2R 22 mm
01   200 combinations - non-master keying
                                                                                                   16.0
                                                              27,0
                                                       35,0




02   200 combinations - master keying
07   500 combinations - non-master keying
08   500 combinations - master keying
17   2000 combinations - non-master keying                                                    9,0 throw
18   2000 combinations - master keying
FINISH                                                                     12,5     28,0
                                                                              when using R bolt
3    Bright chrome
9    Nickel                                                                             1,8
MOVEMENT
B    180º clockwise to unlock - left edge bolt                                                                   27,0
B    180º anti-clockwise to unlock - right edge bolt                              2,0
                                                                ø19,0




BOLT PROJECTION
R    Round face
F    Flat face
                                                                                                                 ø19,1
BOLT TYPE                                                                        5,0
                                                                                                                  Min.
- - Refer to page B101                                                                                     Fixing Details
                                                                        19,0 (PB1L & PB1R)                Note: fixing hole ø20,0
                                                                        22,0 (PB2L & PB2R)                   if bezel is used

Ordering Details                                                                   Measurements shown in mm

STEP 1    STEP 2          STEP 3                   STEP 4
A/PB1L/KEY SERIES/FINISH + MOVEMENT/- BOLT PROJECTION + BOLT TYPE (19 mm left edge bolt)
A/PB1R/KEY SERIES/FINISH + MOVEMENT/- BOLT PROJECTION + BOLT TYPE (19 mm right edge bolt)
A/PB2L/KEY SERIES/FINISH + MOVEMENT/- BOLT PROJECTION + BOLT TYPE (22 mm left edge bolt)
A/PB2R/KEY SERIES/FINISH + MOVEMENT/- BOLT PROJECTION + BOLT TYPE (22 mm right edge bolt)
Ordering example: A / P B 1 L / 0 1 / 3 B / - R R
   ADVISE    Keying requirements, e.g. keyed alike

                                                                                                                               B9
                                                     www.lockfocus.com.au                    lockf@lockfocus.com.au                      Wooden Furniture Locks

                                                 SLIDING DOOR LOCK
LOCK FOCUS PTY LTD
                     A member of the GUD Group
                            ABN 37 004 930 385



                                                 PUSH-IN - 12 MM PIN THROW

                                                 Applications
                                                 This lock is ideal for use on sliding doors.

                                                 Pushing the barrel in results in a 7 mm diameter pin
                                                 extending from the back of the lock (note: no key is
                                                 required when locking). To retract the pin, insert a key
                                                 and turn 45º clockwise. The barrel and pin, being
                                                 spring-loaded, will pop out.

                                                 The lock fits into a 19 mm diameter hole from the rear
                                                 of a panel.



                                                 Specifications
                                                      Zinc alloy diecast housing                                                              A/PP5-
                                                      Single-entry keying - 01 and 02
                                                      Double-entry keying - 07, 08, 17 and 18
                                                      Key removable in locked and unlocked positions                    Dimensions/Fixing shown NTS
                                                      Zinc alloy diecast pin
                                                      Stainless steel capped barrel                                                                                         19,0
                                                                                                                          28,8
                                                      Optional bezel - refer to page B101
                                                      Optional brass extension piece, diameter 7 x 6 mm                          2,0
                                                      long
                                                      One pair of nickel-plated keys per lock



                                                                                                                                                            50,0
                                                                                                                                                                   32,0
                                                                                                            ø19,1




                                                                                                                                                    ø7,0
                                                 Code Information
                                                 KEY SERIES                                                     M4 x 10 deep
                                                 01   200 combinations - non-master keying
                                                 02   200 combinations - master keying
                                                                                                                Locked                                             ø4,0 Fixing holes
                                                 07   500 combinations - non-master keying
                                                                                                            (Pin Extended)                 11,6                    countersunk from
                                                 08   500 combinations - master keying                                                  Pin throw                        rear
                                                 17   2000 combinations - non-master keying
                                                 18   2000 combinations - master keying
                                                 FINISH                                                                   40,4
                                                 3    Bright chrome
                                                 9    Nickel                                                                     24,0
                                                                                                                                                     ø19,1
                                                                                                                                                      Min.




                                                 PIN TYPE
                                                                                                                                                     32,0




                                                 -    Standard, as per drawing
                                                 E    Optional extension piece - diameter 7 x 6 mm long


                                                                                                                                                             Fixing Details
                                                                                                                 Unlocked                                  Note: Fixing hole ø20,0
                                                                                                              (Pin Retracted)                                 if bezel is used




                                                 Ordering Details                                                         Measurements shown in mm


                                                 STEP 1      STEP 2       STEP 3           STEP 4
                                                 A / PP5-/ KEY SERIES / FINISH + - / - - + PIN TYPE
                                                 Ordering example: A / P P 5 - / 0 2 / 3 - / - - -
                                                     ADVISE     Keying requirements, e.g. keyed alike

                                                 B10
    www.lockfocus.com.au                   lockf@lockfocus.com.au                  Wooden Furniture Locks

SLIDING DOOR LOCK




                                                                                                                                              A member of the GUD Group
                                                                                                                                              ABN 37 004 930 385
                                                                                                                                                                          LOCK FOCUS PTY LTD
PUSH-IN - 11 MM PIN THROW
Applications
This lock is ideal for use on sliding doors.

Pushing the barrel in results in an 8 mm diameter pin
extending from the back of the lock (note: no key is
required when locking). To retract the pin, insert a key
and turn 90º clockwise. The barrel and pin, being spring-
loaded, will pop forward.

The lock fits into a 22.1 mm diameter hole from the rear
of a panel.                                                                                        A/PP2- (Unlocked)


Specifications
     Zinc alloy diecast housing
     Key removable in locked and unlocked positions
     Zinc alloy diecast pin                                    A/PP2- (Locked)
     Stainless steel capped barrel
     Optional bezel - refer to page B101                               Dimensions/Fixing shown NTS
     Optional brass extension piece, diameter 8 x 6 mm
     long                                                       23,5
     One pair of nickel-plated keys per lock                                12,0                        22,0

                                                                    2,3
Code Information
KEY SERIES
01 200 combinations - non-master keying




                                                                                                                          50,0
                                                                                                                   35,0
02 200 combinations - master keying
                                                  ø22,0




                                                                                   ø8,0




FINISH
3    Bright chrome
MOVEMENT
S    90º clockwise to unlock                                 34,8                         M4 x 8         ø4,3 Fixing holes
FIXING                                                                                    deep           countersunk 90º
                                                                            11,6                         from rear
-    Customer to supply
PIN TYPE                                                        Locked
                                                            (Pin Extended)
-    Standard, as per drawing
E    Optional extension piece - diameter 8 x 6 mm long
                                                                                                                                 ø22,1 Min.
                                                                                                      35,0




                                                                                                             Fixing Details
                                                                Unlocked
                                                             (Pin Retracted)                          Note: Fixing hole ø20,0
                                                                                                         if bezel is used


Ordering Details                                                          Measurements shown in mm

STEP 1      STEP 2            STEP 3                 STEP 4
A / PP2-/ KEY SERIES / FINISH + MOVEMENT / - - + PIN TYPE
Ordering example: A / P P 2 - / 0 2 / 3 S / - - -
    ADVISE     Keying requirements, e.g. keyed alike


                                                                                                                          B11
                                                     www.lockfocus.com.au                   lockf@lockfocus.com.au                          Wooden Furniture Locks

                                                 SLIDING DOOR LOCK
LOCK FOCUS PTY LTD
                     A member of the GUD Group
                            ABN 37 004 930 385



                                                 WOOD, METAL OR GLASS FIXING
                                                 Applications
                                                 This lock is ideal for use on sliding doors.                      Glass fixing

                                                 Rotating the key 180º results in 7.5 mm long pin
                                                 extending or retracting.

                                                 Three versions of this lock allow fixing to wood, metal
                                                 or glass.

                                                 Wooden fixing consists of two screws which secure
                                                 the lock from the rear and prevent the lock from
                                                 spinning.

                                                 Metal fixing comprises a brass nut. A punched hole
                                                 detail prevents the lock from spinning.

                                                 Glass fixing consists of a spacer, steel washer, rubber
                                                 washer, stepped nut and pin. A glass panel is
                                                 sandwiched between the rubber washer and the
                                                 stepped nut. The pin is used to secure the nut to the
                                                 housing.

                                                 Specifications
                                                                                                                                                                Wood fixing
                                                      Zinc alloy diecast housing
                                                      Key removable in locked and unlocked positions
                                                      Stainless steel capped barrel
                                                      One pair of nickel-plated keys per lock                                 Dimensions/Fixing shown NTS


                                                                                                                              7,5 pin
                                                                                                                              throw                                  Screw
                                                 Code Information                                                                                                    position

                                                 KEY SERIES
                                                                                                           ø22,2




                                                                                                                                                         ø6,0




                                                 01 200 combinations - non-master keying
                                                 02 200 combinations - master keying
                                                 FINISH                                                                18,0
                                                                                                                                                                              M4 x 8
                                                 3    Bright chrome                                                            37,0
                                                                                                                                                   Pin                        deep
                                                 MOVEMENT
                                                 B    180º clockwise to unlock                                                                                        ø35,0 Min.
                                                 FIXING                                                                                                           clearance required

                                                 P-   Wood - two screws supplied                                                                                     ø22,0 Min.
                                                                                                                   ø19,1 Min.               16,6 Min.
                                                 N-   Metal - brass nut supplied
                                                 G3   10 mm thick glass
                                                 G6   8 mm thick glass
                                                 G7   6 mm thick glass
                                                 EXTENSION PIECE                                                                        ø19,1
                                                 -    No extension piece                                           Wooden                Min.
                                                                                                                    Fixing                  Metal
                                                 E    Optional extension piece - diameter 6 x 5 mm long                                                            Glass Fixing
                                                                                                                                            Fixing


                                                 Ordering Details                                                               Measurements shown in mm

                                                 STEP 1        STEP 2            STEP 3                 STEP 4
                                                 A / PP1 - / KEY SERIES / FINISH + MOVEMENT / FIXING + BOLT TYPE
                                                 Ordering example: A / P P 1- / 0 2 / 3 B / P - -
                                                     ADVISE      Keying requirements, e.g. keyed alike


                                                 B12
    www.lockfocus.com.au                   lockf@lockfocus.com.au                  Wooden Furniture Locks

SQUARE BACK BOLT LOCK




                                                                                                                                      A member of the GUD Group
                                                                                                                                      ABN 37 004 930 385
                                                                                                                                                                  LOCK FOCUS PTY LTD
FOR CUPBOARDS - HORIZONTAL
Applications
This lock is ideal for use on cupboards.
                                                                                                      A/PBSR
Rotating the key 180º results in horizontal movement of
                                                                                                    Right edge
the bolt.
                                                                                                   bolt projection
The lock fits into a 19.1mm diameter hole from the rear
of a panel. Screws then secure the lock from the back.

Suits panels up to 19 mm thick.



Specifications
     Zinc alloy diecast housing and back plate
     Zinc alloy diecast bolt - horizontal movement
     Single-entry keying - 01 and 02                          A/PBSL
                                                             Left edge
     Double-entry keying - 07, 08, 17 and 18
                                                           bolt projection
     Key removable in locked and unlocked positions
     Positive click action mechanism
     Stainless steel capped barrel                                Dimensions/Fixing shown NTS
     Optional bezel - refer to page B101
                                                                                           40,0
     One pair of nickel-plated keys per lock
                                                                         10,2


Code Information
KEY SERIES
                                                                20,0




                                                                                                                40,0
01   200 combinations - non-master keying
02   200 combinations - master keying
07   500 combinations - non-master keying
08   500 combinations - master keying                      9,2 mm
17   2000 combinations - non-master keying                bolt throw
                                                                                        26,0            ø4,2 countersunk
18   2000 combinations - master keying                                           35,2
                                                                                                       hole from other side
FINISH
                                                                                                       31,0
3    Bright chrome
                                                          3,5
9    Nickel
MOVEMENT                                                        2,5
B    180º clockwise to unlock - left edge bolt
                                                                                                                        15,5




B    180ºanti-clockwise to unlock - right edge bolt
                                                                                                                               31,0




FIXING
-    Customer to supply
                                                                                ø19,0




                                                                                               ø19,1


                                                                                                              10,5

                                                                20,0                            26,0
                                                                                                       Fixing Details
                                                          8,0
                                                                                               Note: fixing holes ø20,0 if
                                                                                                     bezel is used

Ordering Details                                                       Measurements shown in mm

STEP 1       STEP 2           STEP 3             STEP 4
A / PBSL / KEY SERIES / FINISH + MOVEMENT / - - -
A / PBSR / KEY SERIES / FINISH + MOVEMENT / - - -
Ordering example: A / P B S L/ 0 2 / 3 B / - - -
    ADVISE     Keying requirements, e.g. keyed alike


                                                                                                                        B13
                                                     www.lockfocus.com.au                  lockf@lockfocus.com.au                                         Wooden Furniture Locks

                                                 SQUARE BACK BOLT LOCK
LOCK FOCUS PTY LTD
                     A member of the GUD Group
                            ABN 37 004 930 385



                                                 FOR DRAWERS - VERTICAL
                                                 Applications
                                                 This lock is ideal for use on drawers.

                                                 Rotating the key 180º results in vertical movement of
                                                 the bolt.

                                                 The lock fits into a 19.1mm diameter hole from the
                                                 rear of a panel. Screws then secure the lock from the
                                                 back.

                                                 Suits panels up to 19 mm thick.


                                                 Specifications
                                                      Zinc alloy diecast housing and back plate
                                                      Zinc alloy diecast bolt - vertical movement
                                                      Single-entry keying - 01 and 02
                                                                                                                                                             A/PBSV
                                                      Double-entry keying - 07, 08, 17 and 18
                                                      Key removable in locked and unlocked positions
                                                      Positive click action mechanism
                                                      Stainless steel capped barrel                                                Dimensions/Fixing shown NTS
                                                      Optional bezel - refer to page B101
                                                      One pair of nickel-plated keys per lock                                                                       20,0




                                                                                                                                                                                       10,2
                                                 Code Information
                                                                                                                                     35,2

                                                                                                                                            26,0




                                                                                                                                                                                       40,0
                                                 KEY SERIES
                                                 01   200 combinations - non-master keying
                                                 02   200 combinations - master keying                                 ø4,2 countersunk hole
                                                 07   500 combinations - non-master keying                                from other side
                                                 08   500 combinations - master keying
                                                                                                                                                                    40,0
                                                 17   2000 combinations - non-master keying
                                                 18   2000 combinations - master keying
                                                 FINISH                                                                      3,5

                                                 3    Bright chrome
                                                                                                                                                   26,0




                                                                                                                             2,5                                     ø19,1
                                                 9    Nickel
                                                                                                                                                                                              31,0




                                                 MOVEMENT
                                                                                                                                                           10,5




                                                 B    180º clockwise to unlock
                                                                                                         9,2 mm bolt




                                                 FIXING
                                                                                                            throw




                                                                                                                                             ø19,0




                                                                                                                                                                                15,5
                                                 -    Customer to supply
                                                                                                                                                                             31,0
                                                                                                                              20,0
                                                                                                                                                                  Fixing Details
                                                                                                                       8,0
                                                                                                                                                                  Note: Fixing holes ø20,0
                                                                                                                                                                      if bezel is used


                                                 Ordering Details                                                                     Measurements shown in mm


                                                 STEP 1       STEP 2           STEP 3             STEP 4
                                                 A / PBSV / KEY SERIES / FINISH + MOVEMENT / - - -
                                                 Ordering example: A / P B S V/ 0 2 / 3 B / - - -
                                                     ADVISE     Keying requirements, e.g. keyed alike


                                                 B14
    www.lockfocus.com.au                    lockf@lockfocus.com.au      Wooden Furniture Locks

PROJECTION BOLT LOCK - 42 MM




                                                                                                   A member of the GUD Group
                                                                                                   ABN 37 004 930 385
                                                                                                                               LOCK FOCUS PTY LTD
VERTICAL BOLT PROJECTION
    Applications
This lock is ideal for use on drawers and doors.

It fits through the rear face of the panel, into a hole 22
mm in diameter and 30 mm from the drawer or door
edge. Once checked in, the screws secure the lock
from the back.

Suits panels of up to 42 mm thick.


Specifications
     Zinc alloy diecast housing
     Zinc alloy diecast backplate and bolt (passivated)
     Vertical bolt operation
     Key removable in locked and unlocked positions                        A/PB4V
     Stainless steel capped barrel

Code Information
KEY SERIES
07   500 combinations - non-master keying
08   500 combinations - master keying
17   2000 combinations - non-master keying
18   2000 combinations - master keying
FINISH                                                         Dimensions/Fixing shown NTS
3    Bright chrome
MOVEMENT
B    180º clockwise to unlock
FIXING
-    Customer to supply




Ordering Details                                                Measurements shown in mm


STEP 1       STEP 2          STEP 3
A / PB4V / KEY SERIES / FINISH + MOVEMENT
Ordering example: A / P B 4 V / 1 8 / 3 B / - - -
     ADVISE Keying requirements, e.g. keyed alike


                                                                                             B15
                                                   www.lockfocus.com.au                       lockf@lockfocus.com.au                   Wooden Furniture Locks

                                                 MULTI-DRAWER LOCK - 20 MM
LOCK FOCUS PTY LTD
                     A member of the GUD Group
                            ABN 37 004 930 385



                                                 FRONT MOUNT - ALUMINIUM LOCKING BAR

                                                 Applications
                                                 This lock is ideal for use on multi -drawer cabinets.

                                                 Turning the key results in vertical travel of the locking
                                                 bar.

                                                 Locking tabs lock the individual drawers.


                                                 Specifications                                              Position of locking tabs can
                                                                                                              be adjusted by loosening
                                                     Zinc alloy diecast adjustable locking tabs                    the grub screw

                                                     Extruded aluminium locking bar
                                                     Key removable in locked and unlocked positions
                                                     Optional bezel - refer to page B101
                                                                                                                                             A/CB2A
                                                     Optional locking tabs
                                                     Optional saddle clamps - plastic
                                                     Optional anti-tilt saddle - plastic
                                                                                                                         Dimensions/Fixing shown NTS
                                                     One pair of nickel-plated keys per lock




                                                 Code Information
                                                 KEY SERIES
                                                 01 200 combinations - non-master keying
                                                 02 200 combinations - master keying
                                                 07 500 combinations - non-master keying
                                                 08 500 combinations - master keying
                                                 17 2000 combinations - non-master keying
                                                 18 2000 combinations - master keying
                                                 FINISH
                                                 3 Bright chrome
                                                 9 Nickel
                                                 MOVEMENT
                                                 B 180º clockwise or anti-clockwise to unlock
                                                 LOCKING BAR TYPE
                                                 06A    Dimension A - 600 mm
                                                 012A   Dimension A - 1200 mm




                                                                                                                                                             Note: fixing holes
                                                                                                                                            Fixing Details   ø20,0 if bezel is
                                                                                                                                                                   used


                                                 Ordering Details                                                           Measurements shown in mm

                                                 STEP 1       STEP 2           STEP 3                 STEP 4
                                                 A / CB2A / KEY SERIES / FINISH + MOVEMENT / LOCKING BAR TYPE
                                                 Ordering example: A / C B 2 A / 0 2 / 3 B / 0 6 A
                                                     ADVISE     Keying requirements, e.g. keyed alike
                                                     SPECIFY Number of saddles required, if any
                                                     SPECIFY Number and lengths of tabs - 8 mm or 13 mm
                                                     SPECIFY Anti-tilt device required

                                                 B16
    www.lockfocus.com.au                    lockf@lockfocus.com.au                    Wooden Furniture Locks

MULTI-DRAWER LOCK - 22 MM




                                                                                                                                                                 A member of the GUD Group
                                                                                                                                                                 ABN 37 004 930 385
                                                                                                                                                                                             LOCK FOCUS PTY LTD
SIDE MOUNT - ALUMINIUM LOCKING BAR
Applications
This lock is ideal for use on multi-drawer cabinets.

Turning the key results in vertical travel of the locking
bar.
                                                                Position of locking tabs
Locking tabs lock the individual drawers.                        can be adjusted by
                                                                  loosening the grub
                                                                        screw.

Specifications
                                                                                        A/PB3A
     Zinc alloy diecast adjustable locking tabs
     Extruded aluminium locking bar
     Key removable in locked and unlocked positions
     Optional bezel - refer to page B101
     Optional locking tabs                                              Dimensions/Fixing shown NTS
     Optional saddle clamps - plastic
     Optional anti-tilt saddle - plastic                          22,0                                                                 ø35,0
     One pair of nickel-plated keys per lock                      6,0




                                                                                                                                                    12,5
Code Information                                                             ø19,0




                                                                                            A = Bolt length from lock centre line
                                                                                                                                    19,5
KEY SERIES                                                                                                                                        Locking tab
                                                                                                                                                   (optional)
01    200 combinations - non-master keying
                                                       ø8,0




02    200 combinations - master keying
07    500 combinations - non-master keying
                                                                  8 or 13 mm long,                                                         20,0    Bar saddle
08    500 combinations - master keying                                                                                                             (optional)
                                                                  (to be specified)
17    2000 combinations - non-master keying



                                                                                                                                                       20,0
18    2000 combinations - master keying
                                                                                                                                           30,0
FINISH                                                                                                                                     42,0
3     Bright chrome
9     Nickel
                                                                                                                                                  throw




MOVEMENT                                                            3,0 thick
                                                                                                                                                    9,0




                                                                 aluminium bar
B     180º clockwise or anti-clockwise to unlock
                                                                                                                                           16,0
                                                                 27,0
BOLT TYPE
06A       Dimension A - 600 mm
12A       Dimension A - 1200 mm

                                                                                  Note: Fixing
                                                                                 holes ø20,0 if
                                                               ø19,1 Min.        bezel is used
                                                              Fixing Details
Ordering Details                                                         Measurements shown in mm

STEP 1       STEP 2           STEP 3               STEP 4
A / PB3A / KEY SERIES / FINISH + MOVEMENT / BOLT TYPE
Ordering example: A / P B 3 A / 0 2 / 3 B / 0 6 A
    ADVISE     Keying requirements, e.g. keyed alike
    SPECIFY Number of saddles required, if any
    SPECIFY Number and lengths of tabs - 8 or 13 mm
    SPECIFY Anti-tilt device required

                                                                                                                                                           B17
                                                   www.lockfocus.com.au                        lockf@lockfocus.com.au                Wooden Furniture Locks

                                                 CAMS - TYPE A
LOCK FOCUS PTY LTD
                     A member of the GUD Group
                            ABN 37 004 930 385



                                                 Ordering Considerations                                  Standard Cams
                                                                                                                             16,0

                                                 1. LOCKED POSITION                                                                                         2,0
                                                     Locked position of cam must be specified as viewed
                                                     from the front of lock, e.g. 12 o’clock.
                                                                             12




                                                                                                              L
                                                                       9           3


                                                                             6
                                                 2. BENT CAMS
                                                     For a bent cam, state whether bend is stepped




                                                                                                                  7,5
                                                     away or stepped towards the lock front.




                                                                                                                                         .
                                                                                                                                       SQ
                                                 3. NOTCHING AND CAULKING OF CAMS




                                                                                                                                      0
                                                                                                                                    8,
                                                     Notching and caulking of cams to the above
                                                     details is an additional operation and can be
                                                     supplied on request.
                                                 4. NOTCHED CAMS
                                                                                                          Bent Cam Detail
                                                     For a notched cam, state direction to unlock, i.e.
                                                     clockwise or anti-clockwise.                                            16,0
                                                                                                                                                        B
                                                 5. OTHER CAM SIZES
                                                     Other cam sizes are available on request.
                                                     We have a large number of cams to suit your
                                                     particular needs and applications.
                                                                                                              L




                                                 Cam Ordering Codes
                                                            CAM NO.    DIMENSION L     DIMENSION B




                                                                                                                                                                    12,7
                                                               01           14,3
                                                                                                              7,5




                                                               02           19,0
                                                                                                                                         .




                                                               04           29,4
                                                                                                                                       SQ
                                                                                                                                      0




                                                                                                                                                       Bend Detail
                                                                                                                                    8,




                                                               06           35,0

                                                               09           44,5

                                                               11           50,8                          Alternative Cam Ends
                                                               13           57,2

                                                               51           29,0             3,2

                                                               52           41,0             3,2
                                                                                                           3.0




                                                               53           33,5             4,8                                                                  5,0
                                                               54           50,5             4,8

                                                               55           31,0             6,3
                                                                                                                                                 5,5




                                                               57           51,7             8,0
                                                                                                                                                                           4,0




                                                               60           39,0           11,1
                                                                                                           16.0




                                                               61           31,1          12,7
                                                                                                                                           30º
                                                 EXAMPLE
                                                 The cam lock illustrated is specified as:
                                                 A/CR22/02/3B/N52
                                                 Cam locked at 9 o’clock
                                                 Bent cam to be stepped away
                                                 Cam to be notched                                                      Caulk Detail                   Notch Detail
                                                 Clockwise to unlock

                                                                                                                                          Dimensions/Fixing shown NTS
                                                                                        Cam Type 52
                                                                                                                                           Measurements shown in mm


                                                 B18 0 0
                                                  B1
    www.lockfocus.com.au                    lockf@lockfocus.com.au                 Wooden Furniture Locks

BOLT OPTIONS AND BEZELS




                                                                                                                                        A member of the GUD Group
                                                                                                                                        ABN 37 004 930 385
                                                                                                                                                                    LOCK FOCUS PTY LTD
Projection Bolt Locks                                              Dimensions/Fixing shown NTS




                                                                                                      ,6
                                                                                                   11
           BOLT TYPE           DIMENSION L

                  V                  19,5                               ,3
                                                                   37




                                                                                                                          37,7

                                                                                                                                 66,6
                                                                                                            16
                  F                  21,5                                                                            ,0




                                                                                       31,6
                                                                         16
                                                                              ,0
                  R                  28,0

                  X                  40,5

                  L                  49,5

                  M                  51,5

                                                              BOLT TYPE B                      BOLT TYPE C



                                                                                                           16
                                                                    16                                          ,0
                                                                         ,0




                                                                                                                             L
                                                                                   L




                                                             BOLT TYPE FX                     BOLT TYPE RX
                                                              Bolt out of flat                Bolt out of round
                                                               Shown at 70%


Bezels                                                                  Measurements shown in mm


Bezels are designed to fit onto the nozzles of our
locks. Their main function is to finish off a drilled hole
in timber.

SIZES (Internal Diameter)

-    19 mm
-    22 mm

FINISH

-    Bright chrome
-    Nickel




                                                                                                             B19
                                                                                                           B101

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:9
posted:4/26/2010
language:English
pages:20
Description: Lock Focus Products - Wooden Furniture Locks