Docstoc
EXCLUSIVE OFFER FOR DOCSTOC USERS
Try the all-new QuickBooks Online for FREE.  No credit card required.

EXTENDED ABSTRACT LISTS ICOMMET

Document Sample
EXTENDED ABSTRACT LISTS ICOMMET Powered By Docstoc
					                                                  EXTENDED ABSTRACT LISTS ICOMMET 2009



NO                       NAME & INSTITUTION


1    Mochammad Noer Ilman, Yustiasih Purwaningrum Triono

     Department of Mechanical and Industrial Engineering Gadjah
     Mada University, Yogyakarta
     e-mail : ilman_noer@ugm.ac.id
     noer_ilman@yahoo.com
     85868282888
2    Sudarisman1,2, Bradley de San Miguel1, and Ian J. Davies1

     1
      Department of Mechanical Engineering, Curtin University of
     Technology,
     GPO Box U1987, Perth, WA 6102, Australia, E-mail:
     i.davies@curtin.edu.au
     2
      Mechanical Eng. Dept, Universitas Muhammadiyah
     Yogyakarta,
     Jalan Lingkar Selatan, Tamantirto, Kasihan, Yogyakarta 55183,
     Indonesia.
3    N. Ali, H. Samekto, and M.I. Ghazali
     Department of Material and Design, Faculty of Mechanical and
     Manufacturing Engineering,
     University Tun Hussein Onn Malaysia Johor
     Hd080015@siswa.uthm.edu.my
4    Y.C. Cheng a, A.H. Tan c, S.L. Lee a,b, C.K. Lin a,b, J.C. Lina,b

     a
     Department of Mechanical Engineering National Central
     University
     b
      Institute of Materials Science and Engineering National
     Central University
     c
     Department of Mechanical Engineering Ching-Yun University

     hz2407@yahoo.com.tw
5    Samroeng Netpu1,*, Panya Srichandr2, **
     1
         S.H.K.Engineering Co., Ltd., Samutprakan, Thailand
     2
      School of Energy, Environment and Materials
     King Mongkut’s University of Technology Thonburi, Bangkok,
     Thailand
5




     E-mail: * sam@shkengineering.com, **panya.sri@kmutt.ac.th

6    Husaini Ardy, Fitri Yuniastria
     Materials Engineering Department
     Faculty of Mechanical and Aeronautics Engineering
     Institut Teknologi Bandung
     husaini@material.itb.ac.id
7    Shinji Ando, Hiroshi Agawa*, Akihito Kawano*, Masayuki
     Tsusida* and Hiromoto Kitahara
     Department of Materials Science and Engineering, Kumamoto
     University
     *Graduate Student, Graduate School of Science and
     Technology, Kumamoto University,
     2-39-1, Kurokami, Kumamoto 860-8555, Japan
     shinji@msre.kumamoto-u.ac.jp
8    Nurchayati1 , Paryanto Dwi Setyawan1
     1
         Jurusan Teknik Mesin, Fakultas Teknik, Universitas Mataram

     Jl. Majapahit 62 Mataram, NTB (83125)
     1
         Email: nurchayati_jamil@yahoo.co.id
9    Sutik1), Eddy Yahya2), Zaenal Arifin3)

     Physics Department, Faculty of Mathematics and Science,
     Sepuluh Nopember Institute of Technology (ITS)
     Kampus ITS, Keputih, Sukolilo, Surabaya
     1)
         sutik@physics.its.ac.id
     2)
         eddy--_pjm@its.ac.id
     3)
         arifz@physics.its.ac.id
10   Kurniati Abidin1), Prof.Eddy Yahya2), Zaenal Arifin,M.Si3)

     1)
         Graduate Student of Physics Departement of ITS, Surabaya

     2)
         Lecture Staff of Physics Departement of ITS, Surabaya
     3)
         Lecture Staff of Physics Departement of ITS, Surabaya

11   M. Ridha, Syarizal Fonna and Israr

     Department of Mechanical Engineering, Syiah Kuala
     University
     Banda Aceh, Indonesia, Email: ridha@tdmrc.org

12   Nirbito W.a, Priadi D. b, Sugiarto B.c
12



     a,c
      Dept. of Mechanical Engineering
     Faculty of Engineering
     University of Indonesia, Depok 16424
     Tel : (021) 7270032. Fax : (021) 7270032
     mail : wahyu.nirbito@ui.edu; bangsugi@eng.ui.ac.id

     b
      Dept. Of Metallurgy and Material Engineering
     Faculty of Engineering
     University of Indonesia, Depok 16424
     Tel : (021) 7270011. Fax : (021) 7270077
     E-mail : dedi@eng.ui.ac.id
13   Arif Basuki


     arifbasuki@material.itb.ac.id
     Materials Engineering Study Program, Faculty of Mechanical
     & Aerospace Engineering,
     Institut Teknologi Bandung
     Jl. Ganesha 10 Bandung 40132 Indonesia
14   Deni Ferdian, D.M Nurjaya, Wahyuaji N.P
     Dept. Metallurgy and Material, Engineering Faculty University
     of Indonesia
     Kampus Baru UI Depok, 16424
     Email : deni@metal.ui.ac.id
15   Sitti Aminah, M. Zainuri, Z. Arifin
     )
     Graduate Student of Physics Department of ITS, Surabaya

     2)
         Lecturer Staff of Physics Department of ITS, Surabaya
     Na_minah@physics.its.ac.id
16   Basri, , M. Zainuri, Z. Arifin
     )
     Graduate Student of Physics Department of ITS, Surabaya

     2)
      Lecturer Staff of Physics Department of ITS, Surabaya
     Basri07@physiscs.its.ac.id
17   Moch. Syaiful Anwar, Harsisto
     Research Center for Metallurgy – LIPI, Kawasan PUSPIPTEK
     – Serpong, Tangerang 15314
     E-mail: moch026@lipi.go.id, harsisto@lipi.go.id

18   Yulinda Lestari, Gadang Priyotomo, Harsisto
     Research Center for Metallurgy – LIPI, Kawasan PUSPIPTEK
     – Serpong, Tangerang 15314
     E-mail: yuli021@lipi.go.id, gada001@lipi.go.id,
     harsisto@lipi.go.id
19   Sujarwadi, Dr.Ir. Bambang Widyanto
     Institut Teknologi Bandung, Mechanical and Aerospace
     Engineering Faculty,
     Materials Engineering Study Program

20   Adityo Nugrahanto Widodo, ST, Dr. Ir. Bambang Widyanto
     Institut Teknologi Bandung, Mechanical and Aerospace
     Engineering Faculty,
     Materials Engineering Study Program
EXTENDED ABSTRACT LISTS ICOMMET 2009
               FAILURE ANALYSIS AND CORROSION
                                                                    RESULTS

                   ABSTRACT TITLE                  ACCEPTED:      ACCEPTED:
                                                                              REJECTED
                                                     ORAL          POSTER
           Corrosion Fatigue Crack Growth Rate       For Oral
           Behaviour Of Al 2024-T3 In Seawater     presentation
           Environment




           Failure Mechanism of Unidirectional       For Oral
           Hybrid FRP Composites Containing        presentation
           Carbon and E-glass Fibres Subjected
           to Three-Point Bend Loading




           Analytical study of corrosion fatigue     For oral
           behavior based on experimental data     presentation




           Effect of Spinning Deformation            For oral
           Processing on the Wear and Corrosion    Presentation
           Properties of Al-7Si-0.3Mg Alloys




           Failure Analysis of a Reducer Gearbox     For Oral
           Shaft                                   presentation
Failure Analysis of a Reducer Gearbox       For Oral
Shaft                                     presentation




Molten Salt Corrosion Experiments on        For Oral
Reformer Tube Material (HP 50 Mod.        Presentation
Nb-Ti)



Fatigue Fracture Behavior in                For Oral
Magnesium and Titanium Single             Presentation
Crystals




Fatigue Strength Analysis After                           For Poster
Overload (Tensile And Compression                        Presentation
Overload) On The Carborizing Low
Carbon Steel


Resistance Analysis Of Pitting              For Oral
Corrosion For Stainless Steel Aisi 316l   presentation
In Phosphoric Acid – Chloride
Solution With Chromate And Nitrate
Inhibitors




The Analysis Of Corrosion Inhibition                      For Poster
For Aluminium 2024 In Acidic,                            Presentation
Neutral And Basic Solutions With
Surfactant Sodium Lauryl Sulfate
Inhibitor




Boundary Element Method for                 For oral
Evaluation of Sacrificial Anode           presentation
Cathodic Protection System Design




The Development of New Technique            For Oral
to Detect Incipient Damage                Presentation
                                        For Oral
                                      Presentation
in Machine Component




Low Cycle Fatigue Initiated by          For Oral
Microstructural Degradation of        Presentation

Aero Engine Turbide Blades




Failure Analysis of Injection Pump      For Oral
Bolt                                  Presentation




Electrochemical     Analysis     of                   For Poster
Aluminum Alloy AA3003 and                            Presentation
AA5052 in Methanol Solution
Contaminanted with HCl and H2SO4


The Influence of Heat treatment         For Oral
Temper T6 and T351 to the Corrosion   Presentation
Behaviour Aluminum Alloy 2024 in
NaCl 0,05 M Solution


FAILURE ANALYSIS of CAST                              For Poster
MATERIAL 316 L of                                    Presentation
SEA WATER PUMP IMPELLER in
MIGAS INDUSTRIES

THE ESTIMATION of  FERRITE             For Oral
PHASE CONTENT and THE EFFECT          Presentation
of CORROSION in STAINLESS
STEEL 316L WELDED
The Effect of Inclusion and             For Oral
Temperature of Solution Charging to   Presentation
Degradation The Mechanical
Properties of AISI 1021 due to
Hydrogen Embrittlement
Impact of Deformation Process and       For Oral
Charging Solution Concentration to    Presentation
the
Mechanical Properties Degradation
on AISI 4340 Steel that
Experiences
Hydrogen Embrittlement
 COMMENT




Described more the
parameter, material
example and result.
   Correction on
language (included
in circle) & define
    what is the
     overload?




 Abstract does
  not present a
general result of
the experiment,
 and it must be
     added
                                                                    EXTENDED ABSTRACT LISTS ICOMM


NO                       NAME & INSTITUTION

1    Dody Prayitno, Joko Riyono
     Teknik Mesin-Universitas Trisakti
     Jl Kyai Tapa No 1 Jakarta barat 11440
     Email: dodiutm@yahoo.com
2    Caing
     Materials Science
     University of Indonesia (UI),
     Jakarta-INDONESIA
     caing@unitedcan.com
3    Beny Bandanadjaja ; Arif Basuki & Mardjono Siswosuwarno
     Program Studi Ilmu dan Teknik Material Institut Teknologi
     Bandung (ITB)
     Jl Ganesha 10 Bandung 40132, INDONESIA
     benybj@yahoo.com
4    A. Nuruddina,b, Suyatmanb, N. Idayantic, A. Ramelana, G.R.U.
     Kusumaa, and W.E. Rataulama
     a
      Materials Engineering Study Program, Faculty of Mechanical
     and Aerospace Engineering, Institute of Technology Bandung,
     Indonesia
     b
      Engineering Physics Study Program, Faculty of Industrial
     Technology, Institute of Technology Bandung, Indonesia
     c
      Research Center for Electronic and Telecommunication,
     Indonesian Institute of Sciences, Bandung, Indonesia
     nuruddin@tf.itb.ac.id
5    Hadi Suwarno
     Center for Technology of Nuclear Fuel, National Nuclear
     Energy Agency
     Banten, INDONESIA
     hadis@batan.go.id
6    Fatayalkadri Citrawati
     Research Centre for Metallurgy
      Indonesian Institute of Sciences, Kawasan PUSPIPTEK,
     Tangerang 15314
     email : fatayalkadri.citrawati@lipi.go.id

7    Cheng-Yu Choua, Sheng-Long Leeb*
7
    a
     Department of Mechanical Engineering, National Central
    University, Jhongli, Taiwan
    b
     Institute of Materials Science and Engineering, National
    Central University, Jhongli, Taiwan
    cychou09@gmail.com
8   Yu-Chou Tsaia, Sheng-long Leeb , Chih-Kuang Lina, Jing-Chie
    Linb

    a
    Department of Mechanical Engineering, National Central
    University, Jhongli, Taiwan
    b
     Institute of Materials Science and Engineering/ Department of
    Mechanical Engineering, National Central
    University, Jhongli, Taiwan
    u0119500@cc.ncu.edu.tw
9   Suyitno, Suherman, S. Dharma                         Casting
    and Solidification Technology (CASTEC) Group

   Department of Mechanical and Industrial Engineering
   Gadjah Mada University
   Jl. Grafika No.2 Yogyakarta, Indonesia
   Email: suyitno@ugm.ac.id
10 Suyitno
   Casting and Solidification Technology (CASTEC) Group
   Department of Mechanical and Industrial Engineering Gadjah
   Mada University
   Jl. Grafika No.2 Yogyakarta, Indonesia
   Email: suyitno@ugm.ac.id
11 Hudiyo Firmanto, Patthi Hussain, Othman Mamat
   Mechanical Eng. Dept.
   Universiti Teknologi Petronas
   31750 Tronoh, Bandar Seri Iskandar, Perak, Malaysia
   hudiyo_f@yahoo.com
12 Budi Arifvianto, Suyitno, Adhika Widya Paraga


    Department of Mechanical and Industrial Engineering, Gadjah
    Mada University
    Jln. Grafika 2, Yogyakarta 55281, Indonesia
   Email: suyitno@ugm.ac.id
13 Che-Wei Hsu1 David S.W. Lim2, Cheng-En Jiang2, Sheng-Long
        1
    Lee ,
13


     1. Department of Mechanical Engineering /Institute of Materials
     Science and Engineering, National Central University, Jhongli,
     Taiwan (R.O.C.)
     2. Renewable Energy R&D Center, Chung-Hsin Electric &
     Machinery Mfg. Corp., Taiwan (R.O.C.)
14 Hermawan Judawisastra 1), Tata Santosa2), Tatacipta
     Dirgantara3)
     1
      Material Science and Engineering Research Group - Material
     Engineering Study Program
     2
         Formerly student of Material Engineering Study Program
     3
      Lightweight Structure Research Group
     Faculty of Mechanical and Aerospace Engineering, Bandung
     Institute of Technology
     Ganesha 10 Bandung 40132, Indonesia
     e-mail: hermawan.judawisastra@material.itb.ac.id
15 Hermawan Judawisastra 1), Tata Santosa2), Tatacipta
                  3)
     Dirgantara
     1
      Material Science and Engineering Research Group - Material
     Engineering Study Program
     2
         Formerly student of Material Engineering Study Program
     3
      Lightweight Structure Research Group
     Faculty of Mechanical and Aerospace Engineering
     Bandung Institute of Technology
     Ganesha 10 Bandung 40132, Indonesia
     e-mail: hermawan.judawisastra@material.itb.ac.id
16 Hiromoto Kitahara1 , Fumito Hashiguchi2 , Masayuki Tsushida1
                       1
     and Shinji Ando
     1
      Department of Materials Science and Engineering, Graduate
     School of Science Technology, Kumamoto University 2-39-1
     Kurokami, Kumamoto 860-8555, Japan
     2
      Department of Materials Science and Engineering, Faculty of
     Engineering, Kumamoto University
     2-39-1 Kurokami, Kumamoto 860-8555, Japan
17 Andon Insani1,2) ,Hadi Suwarno3), Johny Wahyuadi1), Eddy S.
     Siradj1)
     1)
       Departement of Metallurgy and Material, University of
     Indonesia
     2)
      Center for Nuclear Fuel Technology, National Nuclear Energy
     Agency, Indonesia
    3)
     Center for Nuclear Industry Materials, National Nuclear
    Energy Agency, Indonesia
    ainsani@telkom.net
18 Budi H. Setiamarga1, Wisma Rumekso1, Florensia Eterno1,
    Umen Rumendi2

    1
     Materials Engineering Study Program, Faculty of Mechanical
    and Aeronautical Engineering, Bandung Institute of Technology,
    Indonesia
    2
     Heat Treatment Division, Bandung Manufacturing
    Polytechnics, Indonesia
19 Budi H. Setiamarga1, Deni Setiawan1, Umen Rumendi2


    1
     Materials Engineering Study Program, Faculty of Mechanical
    and Aeronautical Engineering, Bandung Institute of Technology,
    Indonesia
    2
     Heat Treatment Division, Bandung Manufacturing
    Polytechnics, Indonesia

20 Prantasi Harmi Tjahjanti1,2

    1
         Kopertis VII (East of Java)

    Dpk: Department of Mechanical Engineering, University of
    Muhammadiyah Sidoarjo (UMSIDA)
    E-mail: pran_tasi@yahoo.com ; prantasi@gmail.com

    2
     Mahasiswa Program S3 Pasca Sarjana Teknik Kelautan ITS
    Surabaya
21 R.M. Aldireza Firmansyah, Arif Basuki
    arifbasuki@material.itb.ac.id
    Materials Engineering Study Program, Faculty of Mechanical
    and Aerospace Engineering,
    Institut Technologi Bandung
    Jl. Ganesha 10 Bandung 40132 Indonesia
22 Fu-Kai Hsua, Chih-Kuang Lina, Sheng-Long Leeb,*, Chun-You
    Linc, Hui-Yun Bord

    a
    Department of Mechanical Engineering, National Central
    University, Jhongli, Taiwan
     b
      Institute of Materials Science and Engineering/Department of
     Mechanical Engineering, National Central University, Jhongli,
     Taiwan
     c
     Institute of Materials Science and Engineering, National Central
     University, Jhongli, Taiwan
     d
      Materials Research and Electro-Optics Division, Chung-Shan
     Institute of Science and Technology, Longtan, Taiwan
     *corresponding author, Tel: +886-3-4267325; Fax: +886-3-
     4254501
     E-mail address: shenglon@cc.ncu.edu.tw (S.L. Lee)
23 Edy Riyanto*, Budi Prawara*, Supriyatno**

     *
      Puslit Tenaga Listrik & Mekatronik LIPI, Gd.20, Jl. Cisitu
     No.21/154D, Bandung 40135

     **
       Puslit Fisika LIPI, Gd.80, Jl. Cisitu No.21/154, Bandung
     40135

     Telp. +62-22-2503055, Fax. +62-22-2504773, E_Mail:
     edyr001@lipi.go.id
24 Sri Harjanto* dan Iman Firmansyah Ika
   Department of Metallurgy and Materials Engineering, Faculty of
   Engineering University of Indonesia
   Depok 16424, Indonesia
   *E-mail : harjanto@metal.ui.ac.id

25
     Mochmad Zainuri1, Anne Z2, Dedi P2, Eddy S2
     1.Departement of Physics, Sepuluh Nopember Institute of
     Technology Surabaya
     Email : mochamad_zainuri@yahoo.com
     2.Departement of Metallurgy and Material University of Indonesia

26
     Bondan T. Sofyana, Elena Perelomab and Dhiani Satitia

     aDepartment of Metallurgy and Materials Engineering, Faculty of
     Engineering
     University of Indonesia, Depok 16424
     Tel : (021) 786 3510. Fax : (021) 787 2350
     E-mail : bondan@metal.ui.ac.id

     bDepartment of Materials Engineering, Faculty of Engineering
     Monash University, Clayton, VIC 3800, Australia
27 A. Zulfia1), I. Nyoman Jujur2), and J. Raharjo2)
   1) Department of Metallurgy and Materials, Faculty of
   Engineering University of Indonesia, Kampus Baru UI, Depok
   16424
   2) Center for Materials Technology (PTM) BPPT, Gedung II,
   BPPT Lantai 22, Jl. MH. Thamrin, Jakarta Pusat

28 Fika Rofiek Mufakhir*
   UPT. Balai Pengolahan Mineral Lampung LIPI

    *Corresponding author
     Email : fika.cupiw@gmail.com
     Telp : +62-721-350054, Fax :+62-721-350056

29 Joedonowarso, B. Soegijono , M. Hikam.
   Materials Science Graduate Program,s Faculty of Math and
   Sciences,
   University of Indonesia, Depok 16424
   joedonowarso@yahoo.com, fadhil_net@yahoo.co.id
EXTENDED ABSTRACT LISTS ICOMMET 2009
             METALLURGY MANUFACTURE
                                                                         RESULTS
             ABSTRACT TITLE                      ACCEPTED:          ACCEPTED:
                                                   ORAL               POSTER
 Effect of aluminizing on surface roughness                     For poster Presentation
 of nodular cast iron



 Titanium Effect on Aluminum Alloy AA3104            Oral
 Against the Drawn Wall Ironing During Can       Presentation
 Body Making Process and strength



 Surface Hardness Modification of AISI 4340          Oral
 Steel to Improve Ballistic Resistance           Presentation




 Effect of Oxydants and Fe/Ba Ratio on               Oral
 Properties of Barium Ferrite Prepared by Sol-   Presentation
 gel Auto-combustion




 The formation of Mg2FeH6 compound from            For oral
 nanocrystalline Mg-Fe system                    presentation




 Retained Austenite Volume Fraction                For oral
 Variation During Tensile Loading In Low         presentation
 Alloyed Trip Steel Observed Using In Situ X
 Ray Diffraction Method



 Effects of equal channel angular extrusion                     For Poster Presentation
 process on modification of Al-7Si-0.35Mg
 alloys (POSTER)
Effects of equal channel angular extrusion                     For Poster Presentation
process on modification of Al-7Si-0.35Mg
alloys (POSTER)




Effects of cross-channel extrusion on             For oral
microstructure and mechanical properties of     Presentation

AA6061 aluminum alloy




Sr Modification and TiB grain refinement on       For oral
Al-6,4%Si-0,7%Fe and Al-6,4%Si-1,9%Fe           Presentation




Rapid Solidification Process of Strip Casting     For oral
AA3004                                          Presentation




Solution nitriding of AISI 430 ferritic           For oral
stainless steel                                 Presentation




Effect of surface mechanical attrition            For oral
treatment on                                    Presentation
The roughness and wettability of aisi 316l




Hydrogen storage properties of Mg-based           For Oral
alloys produced by Isothermal Evaporation       presentation
Casting Process
Hydrogen storage properties of Mg-based          For Oral
alloys produced by Isothermal Evaporation      presentation
Casting Process




Influence of Dimension and Surface               For Oral
Morphology to The Peel Strength of             presentation
Al Plate – Al Foam Sandwich




Characterization of Aluminium Foam                            Better to be presented on
Structure                                                          poster session
By Means of Simple 2D Image Analysis




AZ31B Alloy Sheets Severely Deformed by          For Oral
Wire-Brushing                                  presentation




Structure analysis of alloy used Mg3CoNi2 as     For Oral
a hydrogen storage material                    Presentation
The Use of Rice Husk in Pack Carburization       For Oral
Process with Blood Cockles (Anadara            Presentation
Granosa ) Shell and Scallop Clam (Amusium
Spp .) Shell as Energizers




The Utilization of East-African Land-Snail       For Oral
(Bekicot ) Shell and Gold-Apple Snail (Keong   Presentation
Emas ) Shell as Energizers in Pack
Carburization Process of Low Carbon Steel.




The Comparison Between The Casting Result        For oral
                                               presentation
Using Sand Mold Casting and Permanent
Mould Casting
in Making Aluminium Metal Matrix Cast
Composite (AMMCC)
Based on Mechanic Characteristic




Microstructural Modeling of Dual Phase Steel     For Oral
Using Finite Element Method                    Presentation




Effect of Mg3MnNi2 on the electrochemical         for oral
characteristics                                presentation

of Mg2Ni electrode alloy
                                              presentation




Effect Of Manganese Addition On The             For oral
Properties Of Aluminum A369 For               presentation
Application On Die Casting Gas Regulator




                                            For Oral
                                            Presentation
Copper Foam Manufacturing by the Process
of Powder Metallurgy and Dissolution of
Carbonate

Metal Oxide Deposition on the Surface of SiC For Oral
Particles to Produce Al/ SiCp Composites by Presentation
Powder Metallurgy Method




Characteristicas of Cold Spray Aluminium    For Oral
Coating on 4130 Steel, ZE41A-T5,            Presentation
Magnesium, and AA7075 Aluminium Alloys
Substrates
Effect of Graphite on Characterisation of    For Oral
Bronze Bearing Cu-Sn-Zn+C Produced by        Presentation
Powder Metallurgy




INCREASING OF IRON CONTENT FROM              For Oral
IRON ORE LOW CONTENT                         Presentation




A Study of Magnetic Behaviour on                  Oral
Acquisition of Line Heating for Low Carbon    Presentation
Steel
SULTS
                    COMMENT
        REJECTED

                     Redactional
                   correction inside
                       the circle
The abstract
must be
enriched by
some reasons
and objectives,
because it is to
short and not
present a
general view of
the research
                                        EXTENDED ABSTRACT LISTS ICOMMET 2009
                                                                       INNOVATIVE MATERIAL
                                                                                                                               RESULTS
                                                                                                                ACCEPTED: ACCEPTED:
NO                     NAME & INSTITUTION                                       ABSTRACT TITLE                     ORAL       POSTER
1 Cahyo B. Nugroho, Kuan Yew Cheong*, Ahmad Fauzi, and Zainovia       Effect of Spraying Sequence on Physical        Oral
  Lockman                                                             Properties of SiO2 on Silicon Deposited    Presentation
  School of Materials & Mineral Resources Engineering, Engineering    by Ultrasonic Spray Pyrolysis
  Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Seberang
  Perai Selatan, Penang, Malaysia
       e-mail: cheong@eng.usm.my;
       cahyobudi.gm07@student.usm.my
     Tel: +604-599 5259; FAX: +604-594 1011
2    R.J. Talib, S. Istikamah, N.Roslani, M.S. Mariam, M.F. Fazira    Microstructres And Characteristics Of         Oral
     Advanced Material Research Center (AMREC) SIRIM Berhad,          Nanostructured Ysz Powders Sprayed        Presentation
                                                                      By Atmospheric Plasma Spraying
  Lot 34, Jalan Hi-Tech 2/3, Kulim Hi-Tech Park,09000 Kulim, Kedah,
  Malaysia
  E-mail address: talibria@sirim.my
3 Firman Kurniawansyah, Dian Fikawati, Tri A Lestari, Sumarno         The Processing Of Micro-Polystyrene                       For poster
  Department of Chemical Engineering                                  Using High-Pressure Co2 Based                            Presentation
  Institute of Technology Sepuluh Nopember                            Technology
     Kampus ITS Sukolilo, Surabaya 60111, Indonesia
     Phone : +62-31-5961317, fax : +62-31-5999282
     Email : fkurniawan@chem-eng.its.ac.id
4    Dwi N. Suwitaningsih, T. Kawauchi, and T. Takeichi               The Influence of Liquid Rubber                Oral
                                                                      Terminal Group on Thermal and             Presentation
                                                                      Mechanical Properties of
4                                                                                                                        Oral
                                                                                                                     Presentation



    Department of Materials Science, Toyohashi University of              Rubber-modified Polybenzoxazine
    Technology, Toyohashi, Aichi, 441-8580, Japan
    dwingesti@gmail.com or ms075506@tutms.tut.ac.jp
5   1             2                                                       Compressive tests on sandwich beams                        For poster
        B.K. Hadi, M. Kusni, D. Widagdo , H.Prasetyo and D.F. Safari
                                                                          made of jute/epoxy faces and coconut-                     Presentation
    1,2                                                                   shell-grain/synthetic-rubber core of
       Lightweight Structures Research Groups
                                                                          natural composite systems
    Faculty of Aerospace and Mechanical Engineering Bandung Institute
    of Technology
    Jl. Ganeca 10, Bandung 40132 Indonesia
    Ph: +62-22-2504529
    Fax: +62-22-2534164
    E-mail:bkhadi@ae.itb.ac.id
    kusni@ae.itb.ac.id
6   Yi-Min Chena, Jin-An Chena, Ying-Sheng Huanga, Kuei-Yi Leea,b         Enhancement of field emission                  Oral
    a                                                                     properties by depositing iridium dioxide   Presentation
      Department of Electronic Engineering, National Taiwan University of
                                                                          nanoparticles on carbon nanotubes
    Science and Technology, 43 Keelung Road, Section 4, Taipei 106,
    Taiwan
    b
     Graduate Institute of Electro-Optical Engineering, National Taiwan
    University of Science and Technology, 43 Keelung Road, Section 4,
    Taipei 106, Taiwan
  d9602307@mail.ntust.edu.tw
7 Sumarno*, F. Kurniawan, R. R. Andriana, and K. N. Octavia               Graft Copolymerization Of Starch And           Oral
    Material Technology Laboratory                                        Acrylamide For Floculant Synthesis By      Presentation
    Department of Chemical Engineering – The Industrial Technology        Grafting To Methode
    Faculty
    Institute of Technology Sepuluh Nopember Surabaya, Indonesia
    Phone :+62-31-5961317 ; Fax : +62-31-5999282 ;
    onramus@chem-eng.its.ac.id
8   Kusumandari1, Agus Supriyanto1 , Riyatun1, Utari1                   Photovoltaic Effect of Organic Solar           Oral
                                                                        Cells Devices of Heterojunction            Presentation
  Department of Physics, Sebelas Maret University, Surakarta,
                                                                        Chlorophyll-A and TiO2
  INDONESIA
  kndari@gmail.com
9 S. Julaika, A. Hakim, H.D. Permana, F. Kurniawansyah, Sumarno*,       The Effect Of Reaction Temperature                         For poster
  Mahfud, and S.R. Juliastuti                                           And Water-Glycerol Ratio To Glyserol                      Presentation
    Material Technology Laboratorium, Chemical Engineering              Degradation Using Hydrothermal
    Department, Industrial Technology Faculty                           Process
    Sepuluh Nopember Institute of Technology, ITS Sukolilo, Surabaya
    60111
    Phone : +62-31-5961317, fax : +62-31-5999282
    Email : onramus@chem-eng.its.ac.id
    piyya_95@yahoo.com
10 F. Nilna Minah, F Agustina, A Arimuda, F Kurniawan, Sumarno*         Processing Of Foam Microcelluler From        For Oral
    Chemical Engineering Department, Industrial Technology Faculty      Amorf Plastic Polystyrene With Use         presentation
                                                                        Supercritical Carbondioxide
     Sepuluh Nopember Institute of Technology, ITS Sukolilo, Surabaya
    60111
    Telp.031-5961317 ; Fax 031-5999282
    e-mail : onramus@chem-eng.its.ac.id
    nilnaminah@yahoo.com
11 Sudarisman1,2, Bradley de San Miguel1, and Ian J. Davies1            The Effect of Partial Substitution of E-     For Oral
                                                                        Glass Fibre for Carbon Fibre on the        presentation

    1                                                                   Mechanical Properties of CFRP
     Department of Mechanical Engineering, Curtin University of
    Technology,                                                         Composites
    GPO Box U1987, Perth, WA 6102, Australia, E-mail:
    i.davies@curtin.edu.au
    2
        Mechanical Eng. Dept, Universitas Muhammadiyah Yogyakarta,
   Jalan Lingkar Selatan, Tamantirto, Kasihan, Yogyakarta 55183,
   Indonesia.
   sudarisman@postgrad.curtin.edu.au
12 Adri Supardi and Siswanto                                              Effect of Processing Temperature on the      For Oral
                                                                          Mechanical Properties of Polystirene       presentation

   Department of Physics, Faculty Science and Technology, University of
   Airlangga,
   Kampus C Unair, Jl. Mulyorejo, Surabaya
   email : adri@unair.ac.id
13 Slameto Wiryolukito, and Erik Seprian Firmanik                         Production of Aluminium Foam                 For oral
   Materials Eng. Dept.                                                   Through Precursor Route with Addition      presentation
   Bandung Institute of Technology (ITB)                                  CaCO3 and Alumina Powder
   Bandung-INDONESIA
   slameto@material.itb.ac.id
14 M.R.M.Toff, S. Abu Bakar, Jamunathevi, M.H.Othman                      Properties of titania and titania/silver                   For Poster
                                                                          thin films deposited by radio frequency                   Presentation
                                                                          magnetron
    Advanced Material Research Center (AMREC) SIRIM Berhad,               Sputtering system
    Lot 34, Jalan Hi-Tech 2/3, Kulim Hi-Tech Park, 09000 Kulim, Kedah,
    Malaysia
    E-mail address: mradzit@sirim.my
15 Nawadon Petchwattanaa, Sirijutaratana Covavisarucha* and Nukul         Mechanical properties of poly(lactic         For oral
    Euapanthasate
                    b                                                     acid)/ poly(butyleneadipate-co-            Presentation
   a
                                                                          terephthalate) blends
   Department of Chemical Engineering, Faculty of Engineering,
   Chulalongkorn University,
    Bangkok 10330, Thailand.
15                                                                       Mechanical properties of poly(lactic         For oral
                                                                         acid)/ poly(butyleneadipate-co-            Presentation
                                                                         terephthalate) blends



     b
      National Metals and Materials Technology Center (MTEC), National
     Science and Technology Development Agency (NSTDA), Ministry of
     Science, Pathumthani 12120, Thailand.
   fchscv@eng.chula.ac.th
16 Nuraini Tjitra Widya 1), Arie Wibowo 2) and Bambang Sunendar 3)       Synthesis and Characterization of            For oral
     1                                                                   Mesoporous Silica (MCM-41) Using           Presentation
     ) Materials Engineering Department, Faculty of Mechanical and
                                                                         Sodium Dodecyl Sulphate
     Aerospace Engineering, ITB
     2
      ) Engineering Physics Research Group, Faculty of Industrial
     Technology, ITB
     rudi@mail.material.ITB.ac.id
17 Muamar Ganesya Firdausi 1), Arie Wibowo2) and Bambang                 Synthesis and Characterization of Silica     For oral
              2
     Sunendar )                                                          Microcapsules Using Sodium Dodecyl         Presentation
     1
                                                                         Sulfate (SDS) as a Surfactant
     ) Materials Engineering Department, Faculty of Mechanical and
     Aerospace Engineering, ITB
     2
      ) Engineering Physics Research Group, Faculty of Industrial
     Technology, ITB
     rudi@mail.material.ITB.ac.id
18 Indra Mulyana *), Bambang Sunendar **)                                Characteristics Optical properties of        For oral
     *) Material engineering Department, Faculty of Mechanical and       Nickel Doped Zinc Oxide Thin Film as a     Presentation
     Aerospace Engineering, ITB                                          function of dopant concentration
     **) Engineering Physics Research Group, Faculty of Industrial       prepared by Self Assembled Monolayers
     Technology, ITB                                                     Method


     rudi@mail.material.ITB.ac.id
19 Rudi *), Arie Wibowo **), and Bambang Sunendar **)                    Bioactive PMMA bone cement by                For oral
     *) Material engineering Department, Faculty of Mechanical and       modification with tetraorthosilicate and   Presentation
     Aerospace Engineering, ITB                                          calcium hydroxide
19                                                                     Bioactive PMMA bone cement by                For oral
                                                                       modification with tetraorthosilicate and   Presentation
                                                                       calcium hydroxide
     **) Engineering Physics Research Group, Faculty of Industrial
     Technology, ITB
     rudi@mail.material.ITB.ac.id

20 Muhammad Hamzah 1) and Bambang Sunendar Purwasasmita 2)             Transparent And Conducting Aluminum-         For oral
                                                                       Doped Zinc Oxide Thin Film Prepared        Presentation
                                                                       By Self Assembled Monolayers (Sams)
   1) Material Engineering Study Program, Institute of Technology
                                                                       Method
   Bandung
   2) Engineering Physics Research Group, Institute of Technology
   Bandung
   rudi@mail.material.ITB.ac.id
21 Ekavianty Prajatelistia*), Arie Wibowo**) and Bambang Sunendar**) Fabrication of Microcapsules Silica for        For oral
                                                                     Control release with Span-60 as              Presentation
   *) Materials Engineering Department, Faculty of Mechanical and    Surfactant
   Aerospace Engineering, ITB
   **) Engineering Physics Research Group, Faculty of Industrial
   Technology, ITB
   rudi@mail.material.ITB.ac.id
22 Karsono Samuel Padmawijaya, Tokok Adiarto, Bambang Kurniadi        Synthesis of Chitosan-Zeolite                 For oral
                                                                      Composite Membrane for Separating           Presentation
   Department of Chemistry, Science and Technology Faculty, Airlangga Albumin and Urea
   University
   Mulyorejo Street Surabaya 60115 Indonesia
   sam4gaz_ksp_mia@yahoo.com
23 Handoko Darmokoesoemo, Djoni Izak Rudyardjo and Eka Dian           Synthesis and Characterization                For oral
   Pusfitasari.                                                       Nanoparticle Zinc Oxide (ZnO) by Sol-       Presentation
   Department of Chemistry, Science and Technology Faculty, Airlangga Gel Method Based on The Variation of
   University                                                         Temperature
   Mulyorejo Street Surabaya 60115 Indonesia
23                                                                 Synthesis and Characterization              For oral
                                                                   Nanoparticle Zinc Oxide (ZnO) by Sol-     Presentation
                                                                   Gel Method Based on The Variation of
                                                                   Temperature


     van_dee_1808@yahoo.co.i
24 Hermawan Judawisastra 1), Arie Suhartiningsih2)                 Contaminant Determination of Injection      For Oral
     1                                                             Molded Plastic Gear                       presentation
      Material Science and Engineering Research Group - Material
     Engineering Study Program
     2
    Formerly student of Material Engineering Study Program
   Faculty of Mechanical and Aerospace Engineering
   Bandung Institute of Technology
   Ganesha 10 Bandung 40132, Indonesia
   e-mail: hermawan.judawisastra@material.itb.ac.id
25 Mulyatun, Didik Prasetyoko                                      Characterization And Catalytic Activity                   For Poster
   Physics Department, Sepuluh Nopember Institut of Technology     Performaces V2o5/Ts-1 In Benzene                         Presentation
   farika@chem.its.ac.id                                           Hydroxylation
26 Anis Farika, Didik Prasetyoko                                   The Effect Of Calcination Temperature                     For Poster
   Physics Department, Sepuluh Nopember Institut of Technology     Moo3/Ts-1 Catalyst In The                                Presentation
   farika@chem.its.ac.id                                           Hydroxylation Of Phenol
27 Chanidapa Waikrut and Sirijutaratana Covavisaruch *             Comparison of Toughening Efficiencies       For Oral
                                                                   of Impact Modifiers in                    Presentation
   Department of Chemical Engineering, Faculty of Engineering,     Wood Plastic Composites
   Chulalongkorn University, Bangkok 10330, Thailand.
   * E-mail: fchscv@eng.chula.ac.th
28 Rossukon Phongsawat and Sirijutaratana Covavisaruch *           The Influences of Nano-scaled and           For Oral
                                                                   Micro-scaled Rubber Particles on          Presentation
     Department of Chemical Engineering, Faculty of Engineering,   the Automotive Brake Pads
   Chulalongkorn University, Bangkok 10330, Thailand.
   *E-mail: fchscv@eng.chula.ac.th
29 Kamonwan Suwanchatchai and Anongnat Somwangthanaroj             Effect of epoxide - POSS on thermal         For oral
                                                                   and mechanical properties                 Presentation
29                                                                                                                    For oral
                                                                                                                    Presentation
     Department of Chemical Engineering, Faculty of Engineering,           of epoxy nanocomposites in electronic
                                                                           packaging applications
     Chulalongkorn University, Bangkok 10330, Thailand
     beau_jung28@hotmail.com
30 Khusnul Umaroh1), Suminar Pratapa2)                                     Graded phase composition profile           For oral
                                                                                                                    Presentation
     1)
          Graduate Student of Physics Department of ITS                    In fgm α-al2o3/mgo-stabilised-al2tio5
     2)                                                                    Synthesised by multiple infiltration
          Lecturer Staff of Physics Department of ITS
                                                                           method
     1)
          umaroh@physics.its.ac.id
     2)
          suminar_pratapa@physics.its.ac.id
31 Luluk Hariroh1), Suminar Pratapa2)                                      Synthesis Of Α-Al2o3-Tio2 Functionally     For oral
     1)                                                                    Graded Materials By Multiple             Presentation
          Graduate Student of Physics Department of ITS, Surabaya
     2)
                                                                           Infiltration Method
          Lecturer Staff of Physics Department of ITS, Surabaya

     1)hariroh@physics.its.ac.id
     2)suminar_pratapa@physics.its.ac.id
32 Wisnumurti(*) and Sri Murni Dewi(*)                                     Characteristics Of Clay Brick Masonry                    For Poster
   E-mail: wsmurti@telkom.net; wsmurti@ymail.com                           From Malang Region                                      Presentation
     (*)Civil Engineering Departement, Faculty of Engineering, Brawijaya
     University, Malang Indonesia
33 Samsudin Affandia, Heru Setyawana, Sugeng Winardia                      Adsorption Characteristics of Silica       For Oral
      a                                                                    Xerogel from bagasse Ash                 Presentation
      Department of Chemical Engineering
     Faculty of Industrial Technology
     Sepuluh Nopember Institute of Technology
     Kampus ITS Sukolilo, Surabaya, East Java 60111, Indonesia
34 Aris W. Nugroho1,2, Garry Leadbeater1                                   The development of porous ti-nb-ta-zr      For Oral
                                                                           alloy for                                Presentation
     and Ian J. Davies1                                                    Biomedical application
34                                                                                                              For Oral
                                                                                                              Presentation

     1
      Department of Mechanical Engineering, Curtin University of
     Technology,
     GPO Box U1987, Perth, WA 6845, Australia
     2
      Jurusan Teknik Mesin, Universitas Muhammadiyah Yogyakarta,
     Jalan Lingkar Selatan, Tamantirto, Kasihan, Yogyakarta 55183,
     Indonesia.
35 Yofentina Iriani1,2, Viska Inda V.1, M. Hikam2, B.Soegijono2      Study Of Crystallographic Ba1-Xsrxtio3     For Oral
     1                                                               Thin Films                               Presentation
      Department of Physics, Faculty of Mathematics and Science,
     Sebelas Maret University, Surakarta, Indonesia
     2
     Department of Physics, Faculty of Mathematics and Science,
     University of Indonesia, Depok 16424 Indonesia
   Email: yopen_2005@yahoo.com
36 Paryanto Dwi Setyawan1, Sugiman1                                  The Effects Of Fiber Surface Treatment                   For Poster
                                                                                                                             Presentation
     1                                                               To The Physical And Mechanical
      Jurusan Teknik Mesin, Fakultas Teknik, Universitas Mataram
                                                                     Properties Of “Nanas Bali” Fiber
     Jl. Majapahit 62 Mataram, NTB (83125)
     1
      Email: paryanto_ds@yahoo.com
37 Paryanto Dwi Setyawan1, Salman1                                   The Effects of Styrofoam And Rubber                      For Poster
                                                                     Particle                                                Presentation
     1                                                               To The Tensile And Impact Strength Of
      Jurusan Teknik Mesin, Fakultas Teknik, Universitas Mataram
                                                                     Unsaturated Polyester Resin
     Jl. Majapahit 62 Mataram, NTB (83125)
     1
      Email: paryanto_ds@yahoo.com
38 Zulina Afiati1), Suminar Pratapa2)                                X-Ray Diffraction Analysis Of Brucite      For oral
     1)                                                              Dan Periclase Nanopowders Synthesised    Presentation
          Graduate Student of Physics Department of ITS, Surabaya
                                                                     Using Co-Precipitation Method
38                                                                       X-Ray Diffraction Analysis Of Brucite       For oral
                                                                         Dan Periclase Nanopowders Synthesised     Presentation

     2)
                                                                         Using Co-Precipitation Method
          Lecturer Staff of Physics Department of ITS, Surabaya



     1)zulin@physics.its.ac.id
     2)suminar_pratapa@physics.its.ac.id
39 Wiwik Dwi Pratiwi, Triwulan, M.T Wahyuadi                             Mechanical Properties Investigation of                      Poster
     Surabaya State Shipbuilding Polytechnic                             hybrid Ferrocememnt-Natural Fiber with                   Presentation
     Civil engineering, ITS Surabaya                                     High Fly ash Content
40 Musfirah CF Toana*, B. Soegijono**, M Hikam**                         Microporous Carbon Derived from Silica For Oral
   Dept. Fisika Universitas Tadulako*, Dept. Fisika Universitas          Carbide                                Presentation
   Indonesia**

41 Brian Yuliarto, Nugraha                                               Synthesis of Nanoporous Metal Oxide      For Oral
                                                                         Using Sol Gel Method                     Presentation
     Engineering Physics Department, Faculty of Industrial Technology,
     Institut Teknologi Bandung,
      LabTek VI- Jl. Ganesha No.10 Bandung 40132, Indonesia

42 Brian Yuliarto, Cahyo Sukmono, Nugraha                                Characterization of Thin Film ZnO                           Poster
                                                                         Nanoporous Performances as an                            Presentation
     Engineering Physics Department, Faculty of Industrial Technology,   Ethanol Gas Sensor
     Institut Teknologi Bandung,
      LabTek VI- Jl. Ganesha No.10 Bandung 40132, Indonesia

43 Nugraha, Gede Widia Pratama Adhyaksa, Brian Yuliarto                  Synthesis Porous Nanoparticle TiO2      For Oral
   Engineering Physics Department, Faculty of Industrial Technology,     Thin Film by Chemical Bath Deposition : Presentation
   Institut Teknologi Bandung,                                           Studies from Different Solvents
    LabTek VI- Jl. Ganesha No.10 Bandung 40132, Indonesia

44                                                                       Functionalization Effect on Carbon          For oral
     Mohd Roslie Ali,Ahmad Nizam Abdullah,Shahrul Nizam Md Salleh*       Nanotubes in Electrotrophoretic           Presentation
     Nanomaterials Programme,                                            Deposition onto Carbon Fibers Surface
     Advanced Materials Centre (AMREC) SIRIM Berhad,
     Lot 34, Jalan Hi-Tech 2/3, Kulim Hi-Tech Park, 09000, Kulim,
44                                                                       Functionalization Effect on Carbon          For oral
                                                                         Nanotubes in Electrotrophoretic           Presentation
                                                                         Deposition onto Carbon Fibers Surface


   Kedah, Tel: 04-4017100 Fax: 04-4033225
   Corresponding email : shahruln@sirim.my
45 Aditianto Ramelan, Febi Dwi Antony, Firmansyah Sasmita                Low Density Porous Concrete Made by         For oral
   Materials Engineering Department, Faculty of Mechanical               Using 0.1 % Aluminium Paste as            Presentation
   and Aerospace Engineering,Bandung Institute of Technology (ITB)       an Expanding Agent
46 Muhammad Amin, M Yunus, David Chandra Birawida              Mineral   Influence of Sludge and Petroleum                           Poster
   Processing Division of Lampung                             Jl Ir.     Coke Addition to Coal Briquette toward                   Presentation
   Sutami Km 15 Tanjung Bintang Lampung Selatan email:                   Ignition
   muha047@lipi.go.id
   Phone: 0721 350054
   Fax 0721 350056
47 Bambang Prihandoko1 and Anne Zulfia2                                  Conductivity of Lithium Battery          For Oral
   1Research Centre for Physics LIPI and 2Dept. of Metallurgy and        Electrolyte                              Presentation
   Material Engineering FT UI                                            under Influence of Milling Time
   bamb012@lipi.go.id

48 Lukman Atmaja1*, Hamzah Fansuri2, Ella Kusumastuti3                   The Importance of SiO2/Al2O3 Mol         For Oral
    Chemistry Department, Sepuluh Nopember Institute of Technology,      Ratios on Coal Fly Ash Geopolymer        Presentation
   Surabaya
   * Corresponding author : lukman_at@chem.its.ac.id

49 Novrita Idayanti, Nanang Sudradjat                                    PARTICLE SIZE CHARACTERIZATION For Oral
                                                                         ON BARIUM FERRITE MAGNETIC     Presentation
     Pusat Penelitian Elektronika & Telekomunikasi (PPET) - LIPI         MATERIAL
     Jl. Sangkuriang Komp.LIPI Gd.20 Bandung
     Tlp. (022) 2504660, Fax. (022) 2504659

     email : novrita@ppet.lip.go.id

50 Prida N.T., Nyoman Puspa A                                            Effect of Coconut Fiber Additive in      For Oral
                                                                         Polypropylene Microcelllular Foam        Presentation
                                                                         Processing with Supercritical Nitrogen
                                                                         as Blowing Agent
51 Lia Muliani, Totok MS Soegandi                                    Study of Sintering Effect of nc-TiO2 in     For Oral
                                                                     Dye Sensitized Solar Cell                 Presentation
    Research Center for Electronics and Telecommunication (PPET –
    LIPI)
    Jl. Sangkuriang, Kampus LIPI, Gd 20. Bandung
    Tlp. (022) 2504660. Fax. (022) 2504659

    Email : lia@ppet.lipi.go.id

52 Joni Welman Simatupang, Wen-Sheng Wu, San-Liang Lee               The Study of Relative Etching Rate of         Oral
   Dept.of Electronic Engineering, National Taiwan University of     Masked InP/InGaAsP in Fabrication of      Presentation
   Science and Technology, Taipei, Taiwan                            Vertical Taper-Waveguide by Diffusion-
   Email︰joniwsntust@yahoo.co.id; M9602801@mail.ntust.edu.tw         Limited Etching
53 Leanddas Nurdiwijayanto                                           The Influence of Dopant Concentration       For oral
   Bambang Sunendar Purwasasmita                                     to the Electron Trapping Effect in        Presentation
   Arie Wibowo                                                       Titanium-Doped Zinc Oxide Thin Film
    Engineering Physics Research Groups, Faculty of Industrial
   Engineering, Bandung Institute of Technology
   nurdiwijayanto@gmail.com
54 Ari Kurniawan*, Bambang Sunendar Purwasasmita ** Arief            Synthesis And Characterization              For Oral
   Cahyanto***                                                       Hidroxyapatite-Zirconia-Alumina-Silica    Presentation
   *Material Engineering Department, Faculty of Mechanical and       Nanocomposite Using Pulp Acacia
   Aerospace Engineering - ITB                                       Mangium As Template Via Precursor
   **Engineering Physics Research Group, Faculty of Industrial       Process Method
   Technology - ITB
   ***Faculty of Dentistry, Padjadjaran University
55 Akhmad HermanYuwono                                               The amorphous nature and               For Oral
   Department of Metallurgy and Materials, Faculty of Engineering,   nanocrystallinity enhancement in TiO2− Presentation
   University of Indonesia, Indonesia 16424                          PMMA nanocomposites
   *Email: ahyuwono@metal.ui.ac.id
56 Rahmat Satoto                                     Effect of Electric Polarization on            For Poster
                                                     Thermal Diffusivity of Biaxially Stretched   Presentation
   Research Center for Physics                       Poly(ethylene terephthalate) Films
   Indonesian Institute of Sciences(LIPI)
   Jl. Sangkuriang No. 12 Bandung 40135, Indonesia
   Tel : (022) 2503052. Fax : (022) 2503050
   E-mail : rahm008@@lipi.go.id
RESULTS              COMMENT

          REJECTED




                      The data is
                     only enough
                      for poster
not following
  extended
   abstract
    format
There are not
tensile and 3-
 point beding
    results,
 therefore the
data is enough
   for poster
There are not
tensile and 3-
 point beding
    results,
 therefore the
data is enough
   for poster

				
DOCUMENT INFO