Docstoc

EZI-LINTELS GALVANISED STEEL LINTELS

Document Sample
EZI-LINTELS GALVANISED STEEL LINTELS Powered By Docstoc
					InnovatIon through DesIgn


ezi-lintels
galvanised steel lintels




7steel lintels
7Steel products are hot dipped galvanized to provide long
life and a quality finish.

All 7Steel lintels are made to meet the following standards;                                     01

• Hot Dip Galvansied to AS/NZS 4680:1999
                                                                                                      02
• R3 Durability rating in accordance with AS/NZS
  2699.3:2001                                                                                              03

• Available in a large range of sizes and lengths (refer to
                                                               01 Hot-dipped galvanized
  stock table over page)
                                                                  for durability and long life
• Complies with masonry structures code AS3700:2002            02 Internal angle rolled to
                                                                  suit brickwork
• Complies with structural steel code AS4100:1998
                                                               03 Flat base for easy laying
• Easy to use and ready to install                                of brickwork




                                                                                  for information about
                                                                              our products and services
                                                                                 please visit our website

                                                                                 www.7steel.com.au
ezi-lintels / galvanised steel lintels




propping of lintels                           stock chart
7Steel Lintels and flat bar enable the
support of masonry over openings              flat bar
by utilising the strength of steel in
                                                          800mm    900mm    1000mm   1100mm   1200mm
conjunction with the strength of
properly laid brickwork.                      85 x
                                              7mm*          3        3        3        3        3
Whenever brick work is being built up
over a 7Steel Lintel at a faster rate than
the mortar is hardening, propping of          angle
lintels is recommended to avoid any
sagging, which will not effect the strength               900mm    1200mm   1500mm   1800mm   2100mm
of the lintel but may look unsightly.
                                              100 x
                                              100mm*        3        3        3        3        3

end bearing and
selecting lintels                                         2100mm   2400mm   2700mm   3000mm   3300mm   3600mm   4000mm
It is recommended that a minimum of
                                              100 x
150mm on each end of span is allowed          150mm*        3        3        3        3        3        3        3
when selecting the correct lintel eg.
for an opening of 1500mm, add 150m            * Nominal
each end, therefore a 1800mm lintel
will be required.

7Steel always recommend that the
advice of a structural engineer is
sought when using 7Steel Lintels
especially when point loads occur
over openings from hot water systems
or other similar instances.




enquiries and sales
7StEEL BuiLDiNG SoLutioNS
8-10 Stout Road
Mt Druitt NSW 2770
Phone: (02) 9670 9999




                                                                                      for information about
                                                                                  our products and services
                                                                                     please visit our website

                                                                                     www.7steel.com.au

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:156
posted:4/25/2010
language:English
pages:2
Description: EZI-LINTELS GALVANISED STEEL LINTELS