Cable Jacket Slitter by arogers189

VIEWS: 36 PAGES: 2

									                                                                                                                                     5 Blue Heron Drive
    Comstar supply,                             INC                                                                               Collegeville, PA 19426
    Think Cable... Think Comstar                                                                                                  Phone: 610-831-5020
                                                                                                                                    Fax: 610-831-5012
    1-866-326-6782                                                                                                         www.comstarsupply.com



Limited Warranty                                                                                USER GUIDE       USER GUIDE          USER GUIDE
Condux International, Incorporated extends the following warranty to the origi-
nal purchaser of these goods for use, subject to the qualifications indicated:
                                                                                                     Cable Jacket Slitter
Condux International, Incorporated warrants to the original purchaser for use
that the goods or any component thereof manufactured by Condux
International will be free from defects in workmanship for a period of 1 year
from the date of purchase, provided such goods are installed, maintained, and
used in accordance with Condux’s written instructions.

Components not manufactured by Condux International but used within the
assembly provided by Condux International are subject to the warranty period
as specified by the individual manufacturer of said component, provided such
goods are installed, maintained, and used in accordance with Condux’s and
the original manufacturer’s written instructions.

Condux’s sole liability and the purchaser’s sole remedy for a failure of goods
under this limited warranty, and for any and all claims arising out of the
purchase and use of the goods, shall be limited to the repair or replacement
of the goods that do not conform to this warranty.

To obtain repair or replacement service under the limited warranty, the pur-
chaser must contact the factory for a Return Material Authorization (RMA).
Once obtained, send the RMA along with the defective part or goods,
transportation prepaid, to: Condux International, Inc.
                            145 Kingswood Road
                            Mankato, MN 56001

THERE ARE NO EXPRESS WARRANTIES COVERING THESE GOODS
OTHER THAN AS SET FORTH ABOVE. THE IMPLIED WARRANTIES OR
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
LIMITED IN DURATION TO ONE YEAR FROM DATE OF PURCHASE.

                       CONDUX ASSUMES NO LIABILITY IN CONNECTION
                       WITH THE INSTALLATION OR USE OF THIS PROD-
                       UCT, EXCEPT AS STATED IN THIS LIMITED WAR-
                       RANTY. CONDUX WILL IN NO EVENT BE LIABLE
                       FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.


                 ®

CONDUX
Condux International, Inc. • P.O. Box 247 • 145 Kingswood Road • Mankato, MN 56001
507-387-6576 • 800-533-2077 • FAX 507-387-1442
Internet: http://www.condux.com           © Copyright 1996, Condux International, Inc.
                                                                       Printed in USA                                                            ®
                                                   Literature Part Number: 08012992
                                                                Revision Number: 1.2                                                 CONDUX
 5 Blue Heron Drive                                  Collegeville, PA 19426                     (610) 831-5020           Fax: (610) 831-5012
                                                                                www.comstarsupply.com
                                                                                                                                                                5 Blue Heron Drive
  Comstar supply,                             INC                                                                                                            Collegeville, PA 19426
  Think Cable... Think Comstar                                                                                                                               Phone: 610-831-5020
                                                                                                                                                               Fax: 610-831-5012
  1-866-326-6782                                                                                                                                   www.comstarsupply.com


Operating Instructions
1. To start the tool, the cable or innerduct must have an open end or an opening in             3. Continue the procedure in step 2 until the desired amount of sheath has been slit
   the sheath large enough to slide the cutting blade into. Position the cutting blade             open. By repeating Steps 1 and 2, the sheath can be split open at several
   above any pairs, below the sheath and parallel to the cable.                                    intervals making it easier to remove. As with any kind of cable preparation on
                                                                                                   aluminum or steel turnplates, do not spread open the split sheath with your
                                                                                                   fingers since there can be very sharp edges exposed.



                                                                                                Blade Replacement Instructions
                                                                                                To replace the blades you will need a small slot head screwdriver and an adjustable
                                                                                                pliers.
                                                                                                Unscrew both bolts holding the blade onto the tool body and remove the blade and
                                                                                                depth guide tracks. Install a new blade while holding one depth guide track on the
                                                                                                side from which the blade bolts will be inserted and one depth guide track on the
                                                                                                side from which the blade bolts will exit. Push the bolts through the blade holes and
                                                                                                hand tighten the nuts only. Position depth guide tracks equally and then tighten the
2. Install the rotation key onto the square adapter (either right or left side). Grasp          nuts firmly with a pliers.
   the tool handles firmly and make sure that both sides of the toothed wheel are
   biting into the sheath surface. Begin turning the rotation key with your free hand           Replacement Blade Part Number 08012901
   in a forward motion. If the wheel begins to slip, make sure that both sides are
   equally tracking and that your grip is firm enough to ensure steady friction.
                                                                                                Depth Guide Track Adjustment
                                                                                                To adjust the depth guide tracks, use a small slot head screwdriver to loosen the
                                                                                                bolts enough to slide the guide tracks back and forth. Set the depth guide tracks all
                                                                                                the way forward for a shallow cut and all the way back for a deeper cut. Depth
                                                                                                guide tracks should be adjusted according to sheath thickness.



                                                                                                                                    Left/Right Handle
                                                                                                                                      Conversion
                                                                                                                                         Simply remove the rotation key from the
                                                                                                                                         square adapter and place it on the desired
                                                                                                                                         side for right or left-hand operation.




                                                                                                  ADVERTENCIA       !ADVERTENCIA: Favor de leer y comprender todas
                                                                                                                    las instrucciones de operación y seguridad antes
                                                                                                                    de usar el Condux Cable Jacket Slitter. Si Ud. no
                                                                                                    Instrucciones
                                                                                                    de Operación    comprende las instrucciones favor de consultarle
                                                                                                                    a su jefe.

                  !WARNING: Read and understand all procedure                                                       !CAUTION: Wear personal protective equipment:
                  and safety instructions before using any Condux                                                   hard hat, safety glasses, safety shoes, and leather
                  Cable Jacket Slitter. Failure to do so may result in                                              work gloves.
                  personal injury or property damage. Save this
                  user’s guide for future reference.
5 Blue Heron Drive                                 Collegeville, PA 19426                      (610) 831-5020                                   Fax: (610) 831-5012
                                                                               www.comstarsupply.com

								
To top