Docstoc

MINI VU-STAK TAMBOUR DOOR INSTRUCTIONS

Document Sample
MINI VU-STAK TAMBOUR DOOR INSTRUCTIONS Powered By Docstoc
					                MINI VU-STAK TAMBOUR DOOR
                        INSTRUCTIONS

           PLEASE OPEN ALL BOXES & CHECK TO MAKE SURE
                  YOU HAVE ALL PIECES REQUIRED
              READ ALL INSTRUCTIONS BEFORE STARTING




                 Tools required
                 for assembly:
                      (Drill gun not shown)




                          7/16" Wrench




Phillips Head
                                              Claw Hammer
Screwdriver




                       Hardware included:
                                    (Shown full size)




  #10 x 3/8" Phillips Pan            #8 x 3/8" Phillips Pan
 Head Sheet Metal Screw                Head Tek Screw
                                                                                      INST0073 TJE REV1 11/23/04




                                                                 Upright Bracket
                                                              (Not Shown Full Size)
 1/4-20 Flanged Hex Nut          1/4-20 x 1/2" Phillips Pan
                                   Head Machine Screw

                                                   Page 1
                 MINI VU-STAK TAMBOUR DOOR
                         INSTRUCTIONS
                                                             Step 1:   Before beginning to assemble any
                                                             tambour parts, four knockouts need to be
                                                             knocked out of the top cover of the shelving.
                                                             Use a hammer and a screwdriver to remove
                                                             knockouts as shown in Figure A.
                                       Top Cover
                                       of Cabinet




     Figure A




Step 2: Remove top rivet, second from bottom rivet, and a
rivet from middle on each side (see Figure B). Use a nail and
hammer to remove rivets. To do this, place pointed tip of nail
directly in center of rivet (see Detail C). Now hit head of nail
with a hammer and pin of rivet will eject out bottom.




                              Place Nail in
                              center of Rivet




                                                                       Figure B



                                Detail C


                                                    Page 2
            MINI VU-STAK TAMBOUR DOOR
                    INSTRUCTIONS
             1/4-20 x 1/2"             STEP 3:        Fasten upright brackets to shelving by
             Screw                     attaching them where rivets were removed (see Figure D).
                                       Use 1/4-20 x 1/2" nuts and bolts.

                                       STEP 4:           Place door frame bottom in front of shelving
                                       (see Figure E).


                                                                                    Figure E



                          1/4-20 Nut

                   Upright Bracket
Figure D

                                                Door Frame
           Left Upright                             Bottom



                                        STEP 5:        Insert left upright into slots on door frame
                                        bottom (see Figure F). Use #8 x 3/8" tek screws to fasten
                                        upright brackets to left upright (see Figure G). Repeat for
                                        right upright.




                                                                                #8 x 3/8"
                                                                                Tek Screw




 G


                                                                                   Figure G
Figure F
                                            Page 3
                MINI VU-STAK TAMBOUR DOOR
                        INSTRUCTIONS
                                                          Figure H
                                                                                Tambour
STEP 6:         Place tambour box on top of shelving                            Box
& be certain that uprights are aligned with openings in
bottom of box. See Figure H.




  STEP 7:       Remove four #10 x 3/8" Phillips
                                                                          #10 x 3/8" Screw
  Pan Head Sheet Metal Screws from Tambour Box.
  See Figure J.



  STEP 8:      Remove Top Cover from Tambour
  Door Box. See Figure K.


  Figure K
                                 Top Cover




                                                               Figure J


                                                 Page 4
             MINI VU-STAK TAMBOUR DOOR
                     INSTRUCTIONS
      STEP 9:         Remove packaging materials in Tambour Box. Use four 1/4-20 x 1/2"
      Phillips Pan Head Machine Screws & Flanged Hex Nuts to secure the Tambour Box
      to the shelving. See Figure L.


           Figure L
                                                      Tambour Door

                   Roller




              1/4-20 Nut


            1/4-20 x 1/2"
                  Screw




STEP 10:          Align Tambour Door within Plastic Track of Uprights &
pull door down. See Figure M. At this point, door should fully extend &
retract smoothly.

                                                                Figure M




                                             Page 5
       MINI VU-STAK TAMBOUR DOOR
               INSTRUCTIONS
STEP 11:        Install Top Cover with four #10 x 3/8" Phillips Pan Head Sheet
Metal Screws. See Figure N.




                                                               Figure N




                                         Locking the unit
                                         Pull tambour door down until bottom of door
                                         is against the bottom door frame. Insert key
                                         & turn to lock tambour door unit. (Two keys
                                         are included with tambour door unit.)




            If you need assembly assistance, please contact Customer Service at:
                1-866-217-0330 (Monday thru Friday 8:00 AM - 5:00 PM E.S.T.)

                                          Page 6

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:17
posted:4/21/2010
language:English
pages:6