NU-LIFT CLEANER

Document Sample
NU-LIFT CLEANER Powered By Docstoc
					                              NU-LIFT CLEANER
                                   Acidic Surface Cleaner



PRODUCT OUTLINE
                                                      PRECAUTIONS
Nu-Lift does exactly what its name implies,
it lifts out and removes dirt, efflorescence,         ALWAYS test a small area first to
hard water deposits and stains from                   determine ease of application and desired
concrete, grout and natural stone without             results. Gloves and eye protection should
harming or discolouring. Nu-Lift cleaner is           be worn during application. If product
a formulated mineral acid that is user                comes in contact with skin wash skin
friendly.                                             immediately with soap and water. Do not
                                                      mix with other cleaners. Use caution near
FEATURES                                              carpets, fabrics, coated metals, coloured
                                                      grout or coloured cement tile. Not for use
Safely dissolves and removes:                         on metallic glazed tiles, polished marble or
    Stains                                            similar surfaces.
    Lime deposits
    Soap scum                                         DILUTION RATIO
    Efflorescence
    Smears                                            1 part cleaner to 1 part water

PREPARATION & APPLICATION

Sweep or vacuum area first to remove
loose debris. Pre-wet the area with water
ensuring area is damp. Apply Nu-Lift
cleaner with low pressure or pump
sprayer. Apply evenly and allow product to
stand for 2-3 minutes. Agitate with scrub
brush on small areas and use a scrub
machine with stiff blue nylon brush for
large areas. Do not allow solution to dry on
surface, keep area wet at all times.
PowerCleaner must be used and the
surface thoroughly rinsed at least twice
with clean water to neutralise the
PowerCleaner and to remove all dissolved
soil and mineral residue. Ready for
surface traffic in 30 minutes. Allow at least
2 hours drying time before applying any
Semco products.




National sales and service 37-39 Northern Road, Heidelberg West 3081 > Victoria > Australia
Phone > 03 9427 1100 > national > 1300 760 877 > facsimile > 03 9427 7900 > e-mail >
sales@alternativesurfaces.com.au

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:36
posted:4/20/2010
language:English
pages:1
Description: NU-LIFT CLEANER