Product Line

Document Sample
 Product Line Powered By Docstoc
					Product Line - Belts
        Carlisle Power Transmission

• Full line of belts, sheaves,
  pulleys and sprockets
• Product constructions:
  wrapped, raw-edge,
  synchronous, v-rib,
  double angle, specialty
Carlisle Belts
                    Gold Ribbon® Cog-Belt®
Product Name:            Gold Ribbon Cog-Belt


Product Brand:


Part No format:          AX, BX, CX, DX followed by Inside length

Sizes/classifications:   Classical profile, raw edge construction, 23” to 362”




Examples:                CX225 has an inside length or standard length
                         designation of 225 inches, and an outside length
                         of 227.2 inches. It has a 7/8” top width and 9/16”
                         depth.
          Gold Ribbon® Cog-Belt®

• Up to 20% more cord
  of hi-modulus synthetic
  fibers carry high loads
  with minimal stretch
• Compression section
  of exclusive Stiflex®
  compound with
  precision-molded cogs
           Gold Ribbon® Cog-Belt®

• More efficient than
  conventional V-belts
• 30% higher horsepower
  rating cuts replacement
  downtime
• Improved system-wide
  performance delivers
  cost savings
                         Super II® V-Belt
Product Name:             Super II V-Belt


Product Brand:

Part No format:           A, B, C followed by inside length

Sizes/classifications:    Classical profile, raw-edge construction, 21” to 200”




Examples:                 B94 has an inside length or standard length
                          designation of 94”, and an outside length of
                          96.8”. It has a 21/32” top width and a 7/16”
                          depth.
              Super II® V-Belt

• Greater strength
  from centrally placed
  polyester cord
• Longer life on
  severe drives
• Better grip with
  controlled slippage
• Greater flexibility
               Super Blue Ribbon® V-Belt
Product Name:            Super Blue Ribbon V-Belt


Product Brand:


Part No format:          AP, BP, CP, DP, EP followed by inside length

Sizes/classifications:   Classical profile, wrap molded construction, 23” to 662”




Examples:                BP136 has an inside length or standard length
                         designation of 136”, and an outside length of
                         138.8”. It has a 21/32” top width and a 7/16”
                         depth.
       Super Blue Ribbon® V-Belt
• The finest wrapped belt
  in the industry
• Double wrapped cotton
  cover
• ChekMate matching
• Longer, more
  dependable performance
• The work horse of
  classical v-belts
                         Double Angle V-Belt
Product Name:              Double Angle V-Belt


Product Brand:

Part No format:            AA, BB, CC followed by inside length

Sizes/classifications:     Modified/special classical, wrap molded construction




Examples:                  BB60 has an inside length or standard length
                           designation of 60”, and an outside length of
                           64.6”. It has a 21/32” top width and a 17/32” depth.
                          Dry Can Belts
 Product Name:             Dry Can Belts


 Product Brand:


 Part No format:           CC followed by Inside length followed by “S”

 Sizes/classifications:    Specialty notched version of CC Double Angle belt




Examples:                 CC480S has an inside length or standard length
                          designation of 480”, and an outside length of
                          482.7”. It has a 7/8” top width & a 11/16” depth.
                 Power-Wedge® Cog-Belt®
Product Name:            Power-Wedge Cog-Belt


Product Brand:


Part No format:          Profile (3VX, 5VX, 8VX) followed by outside length (X10)

Sizes/classifications:   Narrow wedge profile, raw edge construction




Examples:                5VX630 has an outside length of 63 inches…not 630”.
                         The length in the part number is the outside as
                         opposed to classical belts that show inside length.
                         It has a 5/8” top width and a 17/32” depth.
        Power-Wedge® Cog Belt®

• Exclusive Con-Flex
  design for longer life
  on replacement
  drives
• High horsepower
  ratings permit design
  flexibility to reduce
  cost, space & weight
        Metric Power-Wedge® Cog-Belt®
Product Name:            Metric Power-Wedge Cog-Belt


Product Brand:


Part No format:          SPZ, SPA, SPB, SPC

Sizes/classifications:   Narrow section wedge belt
                          METRIC WEDGE DIMENSIONS
                                    top
                                         thickness
                           section width
                                           (mm)
                                   (mm)
                            SPZ     9.7      8.0
                            SPA     12.7    10.0
                            SPB     16.3    13.0
                            SPC     22.0    18.0
             Super Power-Wedge® V-Belt
Product Name:            Super Power-Wedge V-Belt


Product Brand:


Part No format:          Profile (3V, 5V, 8V) followed by outside length (X10)

Sizes/classifications:   Narrow wedge profile, wrap molded construction




Examples:                5V2120 has an outside length of 212 inches….not 2120”
                         The length in the part number is the outside as
                         opposed to classical belts that show inside length.
                         It has a 5/8” top width and a 17/32” depth.
       RPP PANTHER® Synchronous Belt
Product Name:            RPP Panther


Product Brand:


Part No format:          Pitch length (mm), PTH, tooth pitch, width (MM)

Sizes/classifications:   Super high torque synchronous




Examples:                A Part number of 2200PTH8M-35 is a Panther (PTH)
                         with a pitch length of 2200 mm, a tooth pitch of
                         8 mm, and a width of 35 MM
              RPP PANTHER®

• “Chain” horsepower
  without the mess
• Horsepower ratings
  comparable to urethane,
  PLUS backside idler
  capacity, better heat
  resistance, lower
  drive noise
• Now with Ultra-Cord and Able compound
                RPP PANTHER®

• Performs at 98%
  operating efficiency
  for reduced energy
  consumption
• Patented graphite-loaded,
  self-lubricating,
  nylon cover - resists
  ozone, friction wear
  and abrasion
              RPP Plus® Synchronous Belt
Product Name:            RPP Plus


Product Brand:


Part No format:          Pitch length (MM) – Tooth Pitch – Belt width (mm)

Sizes/classifications:   High torque synchronous




Examples:                A part number of 966-14M-170 is an RPP Plus with a
                         pitch length of 966 mm, a tooth pitch of 14 mm
                         and a width of 170 mm.
      RPP Plus® Synchronous Belt

• Provides up to 50% more
  horsepower capacity
  compared to standard
  high-torque belts
• Ideal for replacing
  chain and gear drives
                         Fin-Fan Belts
Product Name:            Fin-Fan Belts


Product Brand:


Part No format:          Same as RPP Plus, but add “F” to the end

Sizes/classifications:   Specialty synchronous.
                         The belt looks the same as a standard RPP+
                         but has a special cord process made for
                         fin-fan drives. Only 8 sizes available.

Examples:                3500-14M-85F would be 3500 mm pitch length, 14 mm
                         tooth pitch and 85 mm wide. The “F” designates
                         fin-fan type.
                         Long Length RPP®
Product Name:             Long Length RPP Belts


Product Brand:            Branded with part number and date code.


Part No format:           “LL”, Tooth pitch (8m), width in MM

Sizes/classifications:    Specialty synchronous. Open ended
                          RPP belting in 150 foot reels. Can splice to any length.




Example:                  LL8M020 would represent a 150 ft reel of 8m tooth
                          pitch belting in a 20 mm width.
                           Dual RPP®
Product Name:            Dual RPP

Product Brand:           Branded with part number and date code.
                         Brands conform to tooth shape.

Part No format:          “D”, Pitch length (mm), tooth pitch (mm), width (mm)

Sizes/classifications:   Specialty synchronous belts




Examples:                D1120-8M-50 would be a dual sided, 1120 MM pitch
                         length, 8 mm tooth pitch, 50 mm wide belt.
                   Synchro-Cog® Timing Belt
Product Name:            Synchro-Cog Timing Belt


Product Brand:


Part No format:          Pitch Length (in*10), tooth pitch design, top Width (in)

Sizes/classifications:   Standard synchronous




Examples:                700H050 would be a 70 inch pitch length, ½” (H)
                         tooth pitch, and a ½” (050/100) top width.
              Cotton Cleaner Timing Belt
Product Name:            Cotton Drive Timing Belt

Product Brand:

Part No format:          Pitch Length (apprx), “CCB”, Drive Center Distance*10

Sizes/classifications:   Specialty synchronous for cotton cleaner drives
                         1” tooth pitch, only 5 part numbers available.
Examples:                A Part Number of 63CCB165 is a belt with 63” Pitch
                         Length and fits a drive with a Center distance of
                         16.5 inches.
                   Long Length Timing Belting
 Product Name:             Long Length Timing Belting


 Product Brand:            Unbranded

 Part No format:           “LL”, Top Width (in/100), Tooth Pitch Designation

 Sizes/classifications:    Specialty synchronous product




Examples:                 A Part number of LL150H is long length belting,
                          1.5” (150/100) top width, ½” (H) tooth pitch. This
                          product is sold in 100 foot reels (can be spliced to
                          any length).
             Synchro-Cog® Dual Timing Belt
Product Name:            Synchro-Cog Dual Timing Belt
Product Brand:           Branded with date code.
                         Brands conform to tooth shape.

Part No format:          “D”, Pitch length*10 (in), tooth pitch, top width (in)

Sizes/classifications:   Specialty synchronous




Examples:                A part number of D300L075 is a dual sided belt, 30”
                         pitch length, 3/8” (L) tooth pitch, and a top width
                         of ¾” (075/100).
     Synchro-Cog® Dual Timing Belt

• For maintenance-free
  synchronization
  from both sides
  of the belt on
  positive drive
  applications
• Delivers excellent
  performance on
  serpentine drives
                  Durapower® FHP V-Belt
Product Name:            Durapower FHP (light duty) V-Belt


Product Brand:


Part No format:          Profile (3L, 4L, 5L), outside length (inches)

Sizes/classifications:   Light duty/ fractional h.p., wrapped construction




Examples:                A 5L750 is an FHP belt with an outside length of 75”,
                         A top width of 5/8” and a depth of 11/32”.
              Durapower® II FHP V-Belt
Product Name:            Durapower II FHP (light duty) V-Belt


Product Brand:

Part No format:          Profile (3L, 4L, 5L), outside length (inches)

Sizes/classifications:   Light duty/fractional h.p., raw edge construction




Examples:                A 5l750 is an FHP belt with an outside length of 75”,
                         A top width of 5/8” and a depth of 11/32”.
Durapower® ll Construction Features
                  1. Stress-relieved bias-cut
                     cover fabric provides
                     maximum flexibility.
                  2. Hi-Modulus polyester cord is
                     specially treated to maintain
                     belt loads without
                     stretching.
                  3. Raw Edge® belt side walls
                     grip pulleys, minimizing belt
                     slip, noise and drive
                     vibration.
                  4. Special Neoprene
                     compounds support cords
                     evenly and resist flex
                     fatigue.
 Durapower®ll Laboratory Test Results

     303%

                                            75%
                             190%                         69%

                   94%
                                                                 48%




    3L        4L            5L            3L         4L         5L


Longer Life! Premium             Resists Stretch! “Sleeve curing”
materials provide the key        yields a product that stretches less
to longer belt life.             & requires less tension maintenance.
  XDV® Xtra Duty Lawn & Garden Belt
Product Name:            XDV Xtra Duty V-Belt


Product Brand:


Part No format:          Belt profile (38X,48X,58X), outside length (inches*10)

Sizes/classifications:   FHP Light Duty, Wrap molded - premium construction




Examples:                A 48-500 represents an XDV belt with an outside
                         length or circumference of 50”, and a 48X or 4L top
                         width of ½” and a depth of 9/32”.
  XDV® Xtra Duty Lawn & Garden Belt

• Easy release jacket
  for superior declutching
• High tenacity Aramid
  fiber cord provides
  superior shock resistance
• Premium base cushion
  stock is ideal
  for backside idlers
• For mowers, tillers
  and other tough uses
                    Gold Ribbon® Cog-Band®
 Product Name:             Gold Ribbon Cog-Band


 Product Brand:


 Part No format:           “R”, Profile (BX,CX,DX), Inside Length (inches)

 Sizes/classifications:    Banded classical belt, raw edge construction




Examples:                 A typical part number of RCX210-3 is a 3 ribbed banded
                          belt with an inside length of 210”, an outside length
                          of 215.3” with each rib having a “C” profile.
               Power-Wedge® Cog-Band®
Product Name:            Power-Wedge Cog-Band


Product Brand:


Part No format:          “R”, profile (3VX, 5VX, 8VX), Inside or std length design.
Sizes/classifications:   Banded wedge / narrow profile, raw edge construction




Examples:                A typical part number of R5VX950-4 is a 4 ribbed banded
                         belt with an inside length of 95”, an outside length
                         of 96.1”, with each rib having a “5VX” profile.
            Power-Wedge® Chipper Band
Product Name:            Wedge-Band Chipper Drive V-Belt


Product Brand:


Part No format:          “R5VL”, inside length (inches), “-5”
Sizes/classifications:   Specialty banded belt for wood chipper application
                         raw edge laminated construction, only in 5V profile
                         and only in 5 rib configuration (only 10 sizes avail.)




Examples:                A Part Number of R5VL900-5 is a chipper band with
                         an inside length of 90”, and an outside length of
                         91.1”. All CPT Chipper bands are 5V and 5 Ribs.
                         Super Vee-Band®
Product Name:             Super Vee-Band


Product Brand:


Part No format:           “R” , Profile (BP, CP, DP), inside length, “ - # of ribs”
Sizes/classifications:    Classical profile, wrap molded const., Banded belt




Examples:                 A typical part number of RBP210-4 is a 4 ribbed banded
                          belt with an inside length of 210”, an outside length
                          of 214”, with each rib having a “B” profile.
                          V-Ribbed Belt
Product Name:            Vee-Rib


Product Brand:


Part No format:          Effective length * 10 (Inches), profile, # of ribs

Sizes/classifications:   Multi ribbed v-belt, raw edge construction




Examples:                Part Number 2400L8 has an effective length of 240”,
                         an “L” pitch (.185” tooth, .38” depth) and has a total
                         of 8 ribs.
                  Variable Speed Cog-Belt®
Product Name:               Variable Speed Cog-Belt


Product Brand:


Part No format:             Top Width, intended pulley angle, “v”, length * 10

Sizes/classifications:




Examples:                A 2530V890, would have a top width of 25/16 or 1-9/16”,
                         an intended pulley angle of 30 degrees, and a length
                         of 89” (890/10)
               Snowmobile Belts

• Double cog
  performance
• Tough aramid cord
• Made with the best
  rubber compounds
• Increased belt life
• #1 selling snow belts
                   ATV Belts
• Exacting belt length
  tolerances
• Durable, aggressive
  operation
• Enhance efficiency of
  the variable speed
  drive
• Increased belt life
                  Thoro-Twist® V-Belting
Product Name:            Thoro-Twist V-Belting


Product Brand:           Unbranded, comes in boxed rolls, 100 ft lengths


Part No format:          Profile (3L, A, B, C) twist

Sizes/classifications:   Specialty laminated polyurethane (black) belting
                         used for emergency replacement of std belts. Can
                         be assembled by hand with no tools to any length.
Examples:                An order for 1 unit of “b twist” would be a box
                         containing a 100 foot roll of b profile belting.
U.S. Customer Service: 866-773-2926
              Canada: 866-797-2358

       www.CarlisleBelts.com
       info@CarlisleBelts.com

				
DOCUMENT INFO