Thread locking adhesive dispenser

Document Sample
Thread locking adhesive dispenser Powered By Docstoc
					                                                           Cixi Tianhao Electric Technic Co.,ltd
                                                   NO1.Sijie Village GuanFu Road Fuhai Town, Cixi, ZheJiang, China
                                                      TEL: 0086-574-23861582 FAX: 0086-574-63688108

                         T&H anaerobic adhesives dispenser for Screw

Specifications Using for the various screws adhesive with Anaerobic Adhesive

the machine speed is very fast to suit customer requirements for OEM applications.

Greatly increased the screw, pneumatic components, connectors and other products of the reliability of product


1. Liquid be will evenly dispensing inside the screw

2. Position place adjustment convenience

3. Dispensing end can as your require to adjustable

4. Speed is quickly, high efficiency and stability uniform coating

5. Quantitative high accuracy and long life

6. Easy to operate, Compact
7. Large supply device and saving time reloading.

8. Locks bolts, prevents tampering stops corrosion

9. Seals weld, seals threaded pipe, seals nicked threads

10. Digital circuit timing controlling technology was used, and the dispensing time ,motor speed, delay and advance

time ,can be set through the digital dial.

11. The pedal /ring/inductive switches can be chosen.

12.Complete with an accessory dispensing kit.


           Clean, drip-free cutoff
           Greater process control
           Better product quality, reliability and appearance
           Less rework and fewer rejects
           no fluid waste and mess
           Simplified training for new workers


       T&H-TH-2004L3 dispenser 110V-CE
       T&H-TH-2004L3 dispenser             220V-CE

Standard: CE Approved
Length:<120 mm
ID Size: M5-M30
Drive : Precision motor
Control way: Foot pedal
Motor speed: 10~200 Cycles/minute
Repeatability: ±0.01mm
Frequency: 2-5sec/pcs
Input voltage: 1-7 bar (100 psi) maximum
Output voltage: 0.1bar-7bar
Input voltage: 110 VAC or 220 VAC
Internal Voltage: 24 VDC
Weight: <10Kg
SIZE 55 x 40 x 75(cm)

Operating Conditions:
Temperature: 5°C to 45°C (41°F-113°F)
Humidity: 85% RH at 30°C non-condensing

Complete with an accessory dispensing kit

         Power cord 1pcs
         Air glue 1pcs
         Foot pedal 1pcs
         Dispensing tip 5pcs
         Manual 1pcs

Pneumatic components, connectors, screws, bolts, stud, screw, self-tapping screws, etc.
Apply liquid material:
Thread sealant, anaerobic adhesive, thread-locking adhesive, anti-loose plastic, etc.

Description: This kind of adhesive dispenser are mainly designing for locking the screw or screw shape products which can make you screw rust- protection or make you screw shape products more tight,such as Pneumatic components, connectors, screws, bolts, stud, screw, self-tapping screws, etc.