"54Mbps 5.8GHz Outdoor Access PointBridge"
54Mbps 5.8GHz Outdoor Access Point/Bridge Model# OP-5854XLR The Ubridge series is a high-performance Access Point and Bridge designed for enterprises and outdoor users. It is compatible with IEEE 802.11a and supports high-speed data transmission up to 20Mbps. Housed in a NEMA6/IP67 waterproof casing, Ubridge series is designed to withstand any extreme climatic conditions, making it the ideal solution for outdoor applications. Operating in the license-exempt 5GHz band, the OP-5854XLR is specifically designed for point to point solutions with built-in carrier grade PPPoE server and special routing features. It leverages proven OFDM technology to deliver industry-leading, high-speed Ethernet throughput. With its exceptional long range capabilities, the OP-5854XLR is able to establish and maintain reliable, robust connectivity that can exceed 30 km (20 miles) in clear line-of-sight conditions. The Ubridge also represents the perfect solution for bridging networks that are impossible to connect using wired alternatives, including networks separated by difficult terrains, railroads, or bodies of water. The Ubridge outdoor series is based on Atheros eXtended Range (XR) chipset and provides powerful features such as high power, higher throughput, Long Range Parameter Settings, ACL, DHCP Server, Spanning Tree Protocol and QOS feature which allows media files to be delivered over the network more efficiently. Designed for outdoor use, the Ubridge series is able to draw power through Cat-5 Ethernet cable from our DC injector. This ensures that power is available wherever you need it, without the need of expensive electrical work often associated with outdoor installations. Salient Features:- • Outdoor and Waterproof Design • Full IEEE 802.11a compatibility allows inter-operation among multiple vendors • Long distance (up to 20 miles or 30Km) without amplifier • High speed data transfer rate up to 20 Mbps in point-to-multipoint and point-to-point applications. • WDS - Wireless Distribution System for Mesh applications • Supports Atheros extended Range (XR) technology • Spanning Tree Protocol and DHCP Server • Bandwidth control • SPI Firewall and packet/URL filtering • Power over Ethernet – PoE General Specifications:- RF Operation Mode Access Point Station Data Security MAC based ACL Link Parameters Antenna Alignment and RSSI signal Levels Site Surrey Radio and Ethernet Traffic Statistics Management SSH with easy to use mouse-based GUI Antenna Connectors N-type Female Standards + IEEE 802.11a + IEEE 802.3 + IEEE 802.3u + IEEE 802.3x Data Rate + 54, 48, 36, 24, 18, 12, 9 and 6Mbps And 108Mbps Turbo Transmit Output Power + 100mW (20dBm) Max. Receive Sensitivity -94dbm@6Mbps, -84dbm@54Mbps Network Advanced Features Access Point association displays, with per-user, system wide throughput and traffic reporting, plus more. Wireless Client support, connects to an AP for routed operation. Wireless Client Bridge support, connects to a named AP, and establishes a WDS connection for routed or bridged operation. Multiple IPs per interface is supported. Static routing and policy (source) routing. You can now route based on the source IP or the traffic type, such as port 25 email. Full RIP v1/2 and OSPFv2 support. Mesh routing using OLSR High performance learning bridge with optional STP (Spanning Tree Protocol) Network diagnostics tools such as Ping and Throughput testing. Beacon real-time traffic monitor SSH-based configuration interface with easy to use mouse-based GUI. DHCP Server with Static and Dynamic Leases. DHCP Client. Full firewall, NAT and Bandwidth Management support. Layer-7 filtering and shaping. 802.1q VLAN support. VDS (Virtual Distribution System) support, with the ability to create secure ethernet-over-IP, (EoIP) tunnels between two systems, over a routed network. Tunnels can be routed or bridged. CBQ for bandwidth control per IP, range of IP or ports. Firewall, NAT and IPMAP for IP management and control. PPPoE Server with Radius-based authentication SNMP Support Power Power over Ethernet - PoE 802.3af (AC 240V/DC 24V) with Surge Protector Dimensions (200 x 90 x 43 )mm Weight 5.2 lb (2.4 Kg), Include PoE Injector, mounting brackets and accessories. Humidity -10 – 90% (operating) Temperature -30 – 70 C (operating) Electromagnetic Compatibility FCC Part 15 Class B, CE Mark, ETSI 300 328