54Mbps 2.4GHz Outdoor
The Ubridge series is a high-performance Access Point and Bridge designed for enterprises and outdoor users. It is
compatible with IEEE 802.11b/g and supports high-speed data transmission up to 45Mbps. Housed in a NEMA6/IP67
waterproof casing, Ubridge series is designed to withstand any extreme climatic conditions, making it the ideal solution for
Operating in the license-exempt 2GHz band, the OP-2454BG+ is specifically designed for point to multi-point solutions
with built-in carrier grade PPPoE server and special routing features. It leverages proven OFDM technology to deliver
industry-leading, high-speed Ethernet throughput. With its exceptional long range capabilities, the OP-2454BG+ is able to
establish and maintain reliable, robust connectivity that can exceed 50 km (30 miles) in clear line-of-sight conditions.
The Ubridge also represents the perfect solution for bridging networks that are impossible to connect using wired
alternatives, including networks separated by difficult terrains, railroads, or bodies of water.
The Ubridge outdoor series is based on Atheros eXtended Range (XR) chipset and provides powerful features such as
high power, higher throughput, Long Range Parameter Settings, ACL, DHCP Server, Spanning Tree Protocol and QOS
feature which allows media files to be delivered over the network more efficiently.
Designed for outdoor use, the Ubridge series is able to draw power through Cat-5 Ethernet cable from our DC injector.
This ensures that power is available wherever you need it, without the need of expensive electrical work often associated
with outdoor installations.
• Outdoor and Waterproof Design
• Full IEEE 802.11b/g compatibility allows inter-operation among multiple vendors
• Long distance (up to 30 miles or 50Km) without amplifier
• High speed data transfer rate of up to 20 Mbps in point-to-multipoint and 45Mbps in point-to-point applications.
• WDS - Wireless Distribution System for Mesh applications
• Supports Atheros extended Range (XR) technology
• Spanning Tree Protocol and DHCP Server
• Bandwidth control
• SPI Firewall and packet/URL filtering
• Power over Ethernet – PoE
RF Operation Mode Access Point
Data Security MAC based ACL
Link Parameters Antenna Alignment and RSSI signal Levels
Radio and Ethernet Traffic Statistics
Min. and Max. Signal Thresholds
Management SSH with easy to use mouse-based GUI
Antenna Connectors N-type Female
Standards + IEEE 802.11b + IEEE 802.11g + IEEE 802.3
+ IEEE 802.3u + IEEE 802.3x
Data Rate For 802.11b:
+ 11, 5.5, 2, and 1Mbps
+ 54, 48, 36, 24, 18, 12, 9 and 6Mbps
Transmit Output Power For 802.11b:
+ 150mW (22dBm) Max.
+ 100mW (20dBm) Max.
Receive Sensitivity 802.11b,
Network Advanced Features Access Point association displays, with per-user, system wide throughput and
traffic reporting, plus more.
Wireless Client support, connects to an AP for routed operation.
Wireless Client Bridge support, connects to a named AP, and establishes a
WDS connection for routed or bridged operation.
Multiple IPs per interface is supported.
Static routing and policy (source) routing. You can now route based on the
source IP or the traffic type, such as port 25, email.
Full RIP v1/2, OSPFv2 and BGP support.
Mesh routing using OLSR
High performance learning bridge with optional STP (Spanning Tree Protocol)
Network diagnostics tools such as Ping and Throughput testing.
Beacon real-time traffic monitor
SSH-based configuration interface with easy to use mouse-based GUI.
DHCP Server with Static and Dynamic Leases.
Full firewall, NAT and Bandwidth Management support.
Layer-7 filtering and shaping.
802.1q VLAN support.
VDS (Virtual Distribution System) support, with the ability to create secure
ethernet-over-IP, (EoIP) tunnels between two systems, over a routed network.
Tunnels can be routed or bridged.
CBQ for bandwidth control per IP, range of IP or ports.
Firewall, NAT and IPMAP for IP management and control.
PPPoE Server with Radius-based authentication
Power Power over Ethernet - PoE 802.3af (AC 240V/DC 24V) with Surge Protector
Dimensions (200 x 90 x 43 )mm
Weight 5.2 lb (2.4 Kg), Include PoE Injector, mounting brackets and accessories.
Humidity -10 – 90% (operating)
Temperature -30 – 70 C (operating)
Electromagnetic Compatibility FCC Part 15 Class B, CE Mark, ETSI 300 328