catering vans

Document Sample
catering vans Powered By Docstoc
					                                   AIRCRAFT CATERING HI-LIFT




Hi-end PLC Drop Cab (2,200mm to 6,000mm)   Drop Cab (2,200mm to 6,000mm)




Standard Cab (2,650mm to 6,000mm)          Half Cab (1,550mm to 6,000mm)   Mini Hi-Lift (2,400mm to 3,550mm)
   CATERING HI-LIFT
                                                         GENERAL
                                                         The AEREX Standard Cab Catering Hi-Lift is designed to service aircraft with doorsill heights ranging from 2,650mm to 6,000mm.
                                                         The unit has a load capacity of 4,000kg. To cater for a lower loading platform, the user can opt for a Drop Cab or a Half Can
                                                          version. The Drop Cab version allows a loading height of 2,200mm and a Half cab version allows a loading height of 1,550mm.
                                                         All units mentioned have a payload of 4,500kg.
                                                         A specially customized Mini-Hi-Lift is also offered for budget carriers which caters a loading height of 2,400mm to 3550mm and
                                                         has a rated payload of 2000 kg.

                                                         TRUCK SYSTEM
                                                         Our hydraulic and electrical system have state-of-the-art design which offers easy trouble shooting and maintenance. We offer
                                                         Solid State or a high end PLC (Programmable Logic Controller) to couple the truck system with the AEREX modules to form an
                                                         AEREX product.
                                                                                                                     SAFETY FEATURES
                                                         .
ELECTRICAL SYSTEM                                                                                                    Emergency push buttons are located at strategic control
The electrical systems are independent from the chassis electrical                                                   panels to stop operation during emergency. The
system. A master control switch links the electrical supply to the                                                   transmission is interlocked to prevent the truck to be
equipment control system via a circuit breaker. Circuits                                                             driven when stabilizers are extended. Pilot check valves
downstream the circuit breakers and are further protected                                                            ensure all cylinders stay in position. All conspicuous
individually by fuses. All control wirings are neatly labeled and                                                    corners, edges and surfaces are rounded and
converges in a centrally located terminal box. The option of PLC                                                     smoothened for safe working. Additional safety
enables all operation functions/malfunctions to be checked                                                           interlocks or requirements can be incorporated to meet
ONLINE.                                                                                                              specific request.
 HYDRAULIC SYSTEM
 The source of the hydraulic power is from the PTO directly
 coupled to the gear pump. A manual hand pump provides
 an alternative source of hydraulic power in the event of
 engine/pump failure. The system is controlled by electro-
 mechanical solenoid directional valve through toggle
 switches located on control panels. The directional control
 valves are centrally located for ease of accessibility to allow
 manual override in the event of power failure.

                                                                         UMW ADVANTECH SDN. BHD.
                                                                   AEREX GSE – Sales, Marketing & Manufacturing
                                                                       Jalan Utas 15/7, 40915 Shah Alam,
                                                                             Selangor , MALAYSIA.
                                                                              Tel: +603 5163 5000
                                                                              Fax:+603 5510 4381
                                                                       Website: www.umw-advantech.com
                                         TECHNICAL DATA FOR AEREX CATERING HI-LIFTS

                             STANDARD CAB                DROP CAB VERSION               HALF CAB VERSION            MINI HI-LIFT VERSION
                                VERSION
Overall Dimensions:
• Length                          9,800 mm                      10,220mm                        9,400mm                        7,885mm
• Width                           2,500mm                       2,500 mm                        2,500mm                        2,200mm
• Height                          3,800 mm                      3,910 mm                        3,910mm                        3,700mm
Platform Dimensions:
• Main Section                2,234 x 1,000 mm              2,234 x 1,000 mm                  2,400 x 600 mm                 1954 x 1050mm
• Traversable                 1,300 x 1220 mm               1,300 x 1220 mm                  1,000 x 1,500mm                  1220 x 900mm
• Extension                    1,200 x 600 mm                1,200 x 600 mm                    980 x 600 mm                   1200 x 600mm

Van Body:
• Walls                  50mm or 100mm FRP/Polyurethane/FRP with ratchet locking tie rails                          40mm polystyrene with
                                                                                                                    aluminum flat sheets
• Floor                                                                                                             3mm Aluminum chequred
                         4.5mm or 6mm Aluminum Chequered plate with 50mm insulation
                                                                                                                    plate with 15mm plywood
• Roof                                                                                                              Aluminum flat sheet with
                         50mm FRP/Polyurethane/FRP                                                                  polystyrene insulation
Van Body Dimensions:
• Length                                                        7,000 mm                                                       4,885 mm
• Width                                                         2,440 mm                                                       2,040 mm
• Height                                                        2,260 mm                                                       2,330 mm

          Payload                                                4,500 kg                                                       2,000 kg
 Hydraulic Pressure:                                                        138bar (2000psi)
Platform Height Range:
• Minimum                         2,650 mm                      2,350 mm                        1,500 mm                       2,400 mm
• Maximum                         6,000 mm                      6,000 mm                        6,000 mm                       3,550 mm
Chassis:
• Make/Model             ISUZU FTR33M or (user to specify)                                                          MTB 170UV or (user to
• Engine                 ISUZU            or (user to specify)                                                      specify)
• Transmission           Manual with option of Automatic Transmission


     Refrigeration       • Direct Drive or                                                                                        N/A
                         • Self Engine
   Electrical System                          24V, Standard Hard Wiring with option of PLC (Programmable Logic Controller)
                        AIRCRAFT INVALID PASSENGER LIFT




Platform Height Range                                  Features                      Optional Accessories
                           Chassis

Standard Cab               Model        Isuzu FRR33H   • Side door with stairwell    • Stretchers c/w fastener
Min. 2,650 mm              GVW          12,000kg       • Caged tail-lift which can   • Wheelchair c/w fastener
Max. 5,800 mm              Wheel Base   4,250mm          raise/lower/fold/unfold     • Extractor fan
                                                       • Large tinted windows        • Air conditioner
Drop Cab                                               • 2 way intercom
Min. 2,200 mm                                          • FRP/Polyurethane/FRP
Max. 5,800 mm                                            wall and ceiling
                                                       • Moon matting floor
     INVALID PASSENGER LIFT

                                                                               GENERAL
                                                                               The AEREX Invalid Passenger Lift is used for transporting invalid or
                                                                               handicapped passengers using wheelchairs or stretchers while on transit
                                                                               between the aircraft and the passenger terminal building. The unit is capable
                                                                               of elevating to aircraft doors with sill heights of 2650 mm to 5800 mm.
                                                                               For lower height requirements, the end user can opt for a Drop Cab version
                                                                               which caters for the height of 2200 mm to 5800 mm.
                                                                               The double scissors and stabilizer assembly are constructed on a common
                                                                               sub-frame. A front loading platform above the cab rises at the same level as
                                                                               the van body floor to provide a level interface with aircraft doorsills. The
                                                                               platform can be extended hydraulically to reach the aircraft doorsill.
VAN BODY
A side door and a built-in internal staircase is
                                                                              SAFETY FEATURES
provided with a 2 leaf sliding door at the front
and rear of the van body. The van body also                                   Emergency push buttons are located at strategic control
comes with an air conditioning system, interior                               panels to stop operation during emergency. The
lighting and a intercom to facilitate                                         transmission is interlocked to prevent the truck to be
communication with the driver.                                                driven when stabilizers are extended and the tailgate is
                                                                              not stowed. Pilot check valves ensure all cylinders stay
                                                                              in position. All conspicuous corners, edges and surfaces
                                                                              are rounded and smoothened for safe working.
 TAILGATE                                                                     Additional safety interlocks or requirements can be
 A rear tailgate platform can be hydraulically                                incorporated to meet specific request.
 lowered or raised from the ground to the van                                 A door locking mechanism is incorporated when the van
 body floor. The tailgate can also be                                         body raises as an added safety feature.
 hydraulically folded and unfolded with ease




                                                         UMW ADVANTECH SDN. BHD.
                                                   AEREX GSE – Sales, Marketing & Manufacturing
                                                        Jalan Utas 15/7, 40915 Shah Alam,
                                                              Selangor , MALAYSIA.
                                                               Tel: +603 5163 5000
                                                               Fax:+603 5510 4381
                                                        Website: www.umw-advantech.com
                                               TECHNICAL DATA FOR AEREX INVALID PASSENGER LIFT


                                             STANDARD CAB VERSION                                           DROP CAB VERSION


Overall Dimensions:
• Length (tailgate folded)                              7,780mm                                                 8,320 mm
• Width                                                 2,500 mm                                                2,500 mm
• Height                                                3,980 mm                                                3,980 mm
Van Body:
• Walls                      50mm or 100mm FRP/Polyurethane/FRP with ratchet locking tie rails
• Floor                      4.5mm or 6mm Aluminum Chequered plate with 50mm insulation
• Roof                       50mm FRP/Polyurethane/FRP


         Payload                                                                          1,000 kg
   Hydraulic Pressure:                                                                138bar (2000psi)
Platform Height Range:
• Minimum                                               2,650 mm                                                2,200 mm
• Maximum                                               5,800 mm                                                5,800 mm
Chassis:
• Make/Model                 ISUZU FRR 33H or (user to specify)
• Engine                     Isuzu 6HH1
• Transmission               Manual with option of Automatic Transmission


 Air Conditioner System      • Option of cassette top mount direct drive unit
    Electrical System        24V, Standard Hard Wiring with option of PLC (Programmable Logic Controller)
                        AIRCRAFT LAVATORY SERVICING TRUCK




Chassis                          Tank Capacity           Pump                            Vacuum System (Optional)   Lift Platform
Model            Isuzu NQR 70L   Waste     2300 litres   Material      S/Steel           Drive   Hydraulic motor    Material       S/Steel tube frame and
GVW              8700 kg         Water     1300 litres   Flow rate      120L/min         Type    Liquid Ring        aluminum chequered floor
Wheelbase        3365 mm         Material  S/Steel       Pressure      35 psi            Suction 15inHg vacuum      Height         3200 mm (max)
Turning radius   6.2meter        Thickness 6 mm          Drive         Hydraulic motor                              Limit Switch   Antenna type
                                                         Hyd. source   PTO pump                                     Lift System    Scissors lift
LAVATORY TRUCK
                 GENERAL
                 The AEREX Lavatory Servicing Truck is a self-contained unit consisting of a 2200 litre waste tank, 1300 litres water tank,
                 water pump assembly, waste hose, water hose, hoses compartment and lift platform assembly.
                 The scissor lift platform at the rear of the unit helps operators reach the aircraft’s discharge port easily.

                 WASTE TANK & WATER TANK
                 The stainless steel tank is semi elliptical in shape and has two separate compartments, one for the water storage and one
                 for waste storage.
                 The waste tank comes complete with an inspection manhole, a water flushing line to clean the interior of the tank, an intake
                 port and a waste discharge valve.
                 The water tank comes complete with an inspection manhole, filling port, sight glass and outlet to the pump.
                 The top surface of the tank is covered with anti-skid strips.


                  WATER PUMP ASSEMBLY
                  The hydrostatically driven, centrifugal pump is capable of delivering 120 litres/min at 35psi. The whole assembly, which
                  includes control and regulating valves, is housed in a steel cabinet which is below the tank and beside the chassis.
                  This is to allow accessibility and positive feed to the inlet of the pump.


                 VACUUM PUMP ASSEMBLY
                 The hydrostatically driven vacuum pump is capable of sustaining a 20 inchHg negative displacement in the tank. Free
                 air delivery of the vacuum pump is at 2000 litres/min. Suction is carried by opening the ball valve situated at the lift platform.
                 For discharging, a positive feed 0.7 bar is applied to the tank to speed up the discharging process.

                  LIFT PLATFORM
                  The lift platform at the rear of the truck is constructed from stainless steel tube frames and an aluminum floor plate.
                  The platform control panel, flow meter, water hose coupler, swivel working spotlight and an antenna type safety limit
                  switch are located on the lift platform. A stowage compartment for the waste hose is also located here.




                                 UMW ADVANTECH SDN. BHD.
                        AEREX GSE – Sales, Marketing & Manufacturing
                               Jalan Utas 15/7, 40915 Shah Alam,
                                     Selangor , MALAYSIA.
                                      Tel: +603 5163 5000
                                      Fax:+603 5510 4381
                               Website: www.umw-advantech.com
                             TECHNICAL DATA FOR AEREX LAVATORY SERVICING TRUCK


                                                               STANDARD CAB VERSION

Overall Dimensions:
• Length                                                                 6,425 mm
• Width                                                                  2,050 mm
• Height                                                                 2,250 mm

Chassis:
• Make/Model                                              ISUZU NQR 70L or (user to specify)
• Engine                                                                Isuzu 4HE1
• Transmission                                         Manual with option of Automatic Transmission
Waste Tank:
• Capacity                                                                2,300 litres
• Shape                                                                 Semi-elliptical
• Material                                                           6 mm stainless steel
• Waste Hose                                         5m (15ft) with cuffs on both ends (100 mm diameter)

Water Tank:
• Capacity                                                             1,300 litres
• Material                                                          6 mm stainless steel
Water Pump:
• Drive                                                     Hydrostatic driven by hydraulic motor
• Material                                                              Stainless Steel
• Flow rate                                                              120 litre/min
• Pressure                                                                   35psi
• Type                                                              Centrifugal Impeller
Vacuum Pump:
• Drive                                                    Hydrostatic driven by hydraulic motor
• Type                                                                  Liquid Ring
• Suction                                                             15 inHg vacuum
Lift Platform:
• Basket dimension (LxWxH)                                     1200 mm x 800 mm x 900 mm
• Max Lift Height                                                 3,000 mm from ground
• Design Payload                                                         200 kg
                     AIRCRAFT WATER SERVICING TRUCK




                                                                Pump                            Lift Platform
Tank Capacity / Construction   Chassis                          Material      S/Steel           Material       S/Steel tube frame and
Water       3000 litres        Model            Isuzu NQR 70L   Flowrate      120 litre/min     aluminum chequered floor
Material    S/Steel            GVW              8700 kg         Pressure      50 psi            Height         3200 mm (max)
Thickness   4.5 mm             Wheelbase        3365 mm                                         Limit Switch   Antenna type
                                                                Drive         Hydraulic motor
                                                                                                Lift System    Scissors lift
                               Turning radius   6.2 meter       Hyd. source   PTO pump
WATER TRUCK

              GENERAL
              The AEREX Water Servicing Truck is a self-contained unit consisting of a stainless steel water tank, assembly and lift platform.
              The tank interior is smoothened and coated with food grade paint. It is formed from a 4.5 mm stainless steel with ends dished
              outwards to take water surge. Special attention is laid on the tank design to avoid cavities which can trap dirt and is ideal for
              bacteria breeding.
              The scissor lift platform at the rear of the unit helps operators reach the aircraft’s water filling port easily.

               WATER TANK
              The stainless steel tank is semi elliptical in shape and comes complete with two inspection manholes, a filling port, a level
              Indication sight gauge and an accessible drain valve.
              The manhole is designed to allow cleaners to enter the tank for inspection and manually clean the internal surfaces.
              The top surface of the tank is covered with anti-skid strips.


              WATER PUMP ASSEMBLY
              The whole assembly, which includes control and regulating valves, is housed in a compartment below the tank and
              beside the chassis. This is to allow accessibility and positive feed to the inlet of the pump.
              The centrifugal stainless steel water pump is hydrostatically driven by a hydraulic motor. The water pump is regulated to
              deliver 30 US gal/min at 50 psi.


              LIFT PLATFORM
              The lift platform at the rear of the truck is constructed from stainless steel tube frames and an aluminum floor plate.
              The platform control panel, flow meter, water hose coupler, swivel working spotlight and an antenna type safety limit
              switch are located on the lift platform.




                                  UMW ADVANTECH SDN. BHD.
                          AEREX GSE – Sales, Marketing & Manufacturing
                                Jalan Utas 15/7, 40915 Shah Alam,
                                      Selangor , MALAYSIA.
                                       Tel: +603 5163 5000
                                       Fax:+603 5510 4381
                                Website: www.umw-advantech.com
                             TECHNICAL DATA FOR AEREX WATER SERVICING TRUCK




                                                             STANDARD CAB VERSION

Overall Dimensions:
• Length                                                                6,225 mm
• Width                                                                 2,050 mm
• Height                                                                2,250 mm

Chassis:
• Make/Model                                            ISUZU NQR 70L or (user to specify)
• Engine                                                              Isuzu 4HE1
• Transmission                                       Manual with option of Automatic Transmission
Water Tank:
• Capacity                                                             3,000 litres
• Shape                                                               Semi-elliptical
• Material                                                        4.5 mm stainless steel
• Hose Retriever                                                    Articulated Type
• Water hose                                        5m (15ft) length with aircraft connection and plug

Water Pump:
• Drive                                                  Hydrostatic driven by hydraulic motor
• Material                                                           Stainless Steel
• Flow rate                                                           120 litre/min
• Pressure                                                               50 psi
• Type                                                           Centrifugal Impeller
Lift Platform:
• Basket dimension (LxWxH)                                   1200 mm x 800 mm x 900 mm
• Max Lift Height                                               3,000 mm from ground
• Design Payload                                                       200 kg
                        AIRCRAFT PASSENGER STAIRS




                                   Fixed Passenger Staircase




Open type (without canopy)
                              Canopy with vestibule interfacing   Canopy with sliding interfacing
 PASSENGER STAIRS
                                                     GENERAL
                                                     The AEREX Passenger Stairs is designed to service aircraft doorsill heights
                                                     of 2400 mm to 5750 mm.
                                                     The user can opt for a VIP type totally enclosed canopy with choice of
                                                     interfacing to the aircraft door opening –either collapsible vestibule or sliding
                                                     fixed canopy.
                                                     The frame is designed to allow it to be mounted on any suitable commercial
                                                     chassis. It is made from steel structures and is externally finished with
                                                     aluminum panels.
                                                     The steps and platform flooring are constructed from aluminum chequered
                                                     plates with extrusion nose lining the forward edge of each bend.


                                                      THE PLATFORM
                                                                                                                     FIXED & VARIABLE PASSENGER
                                                      The user can apply the micro-height                            STAIRCASE
THE STAIRS                                            adjustment located at the platform control
                                                      panel to align the slope inclination of the                    The AEREX Fixed Passenger is the
The stairs assembly consist of moveable               platform to the aircraft doorsill height. This is              other option of a towable, parallelogram
upper stairs and fixed lower stairs. The upper        facilitated by the action of two hydraulic                     passenger boarding stairway. This
stairs assembly is designed to extend in a            cylinders of the slope frame assembly. Pilot                   stairway has a rigid axle with castor
telescopic manner to cater for varying height         check valves ensures the hydraulic cylinders                   wheels on the plane side.
requirement. A step ratchet lock mechanism            stay in position once control is deactivated.
locks the upper stairs when located in position.                                                                     It is equipped with 4 stabilizers,
It also ensures that the upper and lower stairs                                                                      illumination and handrails on the leading
assembly is spaced in full steps configuration.                                                                      platform. All corners are protected in
                                                                                                                     rubber as a precaution.
To illuminate the steps in night operation,
lighting is lined on the sidewalls of the steps
and platform area. Stabilizers on the main
frame provide the rigidity to the complete stairs
assembly.

                                                           UMW ADVANTECH SDN. BHD.
                                                    AEREX GSE – Sales, Marketing & Manufacturing
                                                         Jalan Utas 15/7, 40915 Shah Alam,
                                                               Selangor , MALAYSIA.
                                                                Tel: +603 5163 5000
                                                                Fax:+603 5510 4381
                                                         Website: www.umw-advantech.com
                                                    TECHNICAL DATA FOR AEREX PASSENGER STAIRS


                                                STANDARD CAB VERSION                                      FIXED & VARIABLE STAIRCASE


Overall Dimensions:                                                                         Overall Dimensions:                  FIXED         VARIABLE
• Length (retracted           8,500 mm
excluding canopy)                                                                           • Length                            5390 mm          5585 mm
• Width (extreme)             2,800 mm                                                      • Width (extreme)                   1500 mm          1500 mm
• Height (without             3,800 mm                                                      • Height                            4445 mm          4240 mm
canopy)                       5,300 mm
• Height (with canopy)
Stairs Height Range:                                                                        Stairs Height Range:
• Retracted                   2,400 mm                                                      • Retracted                         3470 mm          3265 mm
• Extended                    5,750 mm                                                      • Extended                            N/A            3840 mm


Steps:                                                                                      Steps:
• Material                    4.5 mm aluminum chequered plates                              • Material                       Aluminum chequered plate
• Thread Depth                270 mm                                                        • Thread Depth                   250 mm
• Bottom Step                 205 mm                                                        • Stair Width                    1000 mm
• Stair Width (lower stair)   Swing Type
• Stair Width (upper stair)   1,500 mm
                              1,500 mm
Platform Landing:                                                                           Platform:
• Depth                       1,800 mm                                                      • Length                         1171 mm          1181mm
•Width                        1,850 mm                                                      • Width                          1500 mm          1500mm
•Railing                      Sliding bumper with stainless steel handrails
Canopy:
• Type                        Option of See through polycarbonate or Aluminum Open Canopy                                N/A
• Tint                        Greyish Blue/ Green
• Interfacing                 Sliding canopy
Chassis:
• Make/Model                  ISUZU NPR 71L or (user to specify)                                                         N/A
• Engine                      Isuzu 4HG1
• Transmission                Manual with option of Automatic Transmission

    Electrical System         24V, Standard Hard Wiring with option of                              Solar powered or 12V to 24V battery with charger
                              PLC (Programmable Logic Controller)
            AIRCRAFT MAINTENANCE PLATFORM




4.6 Meter     5 Meter     6 Meter      7- 9 Meter
MAINTENANCE PLATFORM
                                GENERAL
                                The AEREX 4.5m to 9m Maintenance Lift Platform is designed to facilitate
                                good access for aircraft maintenance. It incorporates a forward platform shift
                                that moves the platform forward to narrow the gap with the aircraft.
                                Side extensions are also provided on the longitudinal side of the platform for
                                closer reach to the aircraft fuselage.
                                The unit consist of a chassis cab, outriggers, a hydraulically powered double
                                scissors lift mechanism, a main platform with hydraulically operated forward
                                shift and manually operated side platform extensions on each side. A
                                hydraulically operated tailgate (tail lift) to facilitate lifting of material form
                                ground level to platform and vice-versa.


                                PLATFORM
                                The platform is raised by a double scissors mechanism by action of two
                                telescopic hydraulic cylinders. Pilot check valves, flow control, etc. are
                                installed as a standard safety requirement
                                The platform is lined with aluminum chequered plates. Safety railings (either
                                collapsible type or rigid type) are installed on the four sides of the platfrom.
                                Platform edges are cushioned with tubular rubber bumpers.




                         UMW ADVANTECH SDN. BHD.
                   AEREX GSE – Sales, Marketing & Manufacturing
                        Jalan Utas 15/7, 40915 Shah Alam,
                              Selangor , MALAYSIA.
                               Tel: +603 5163 5000
                               Fax:+603 5510 4381
                        Website: www.umw-advantech.com
                                              TECHNICAL DATA FOR AEREX MAINTENANCE PLATFORM


                                                                                   STANDARD CAB VERSION


Overall Dimensions:
• Length (retracted                                                                           8,500 mm
excluding canopy)
• Width (extreme)                                                                             2,800 mm
• Height (without canopy)                                                                     3,800 mm
• Height (with canopy)                                                                        5,300 mm

Stairs Height Range:
• Retracted                                                                                   2,400 mm
• Extended                                                                                    5,750 mm


Steps:
• Material                                                                       4.5 mm aluminum chequered plates
• Thread Depth                                                                               270 mm
• Bottom Step                                                                                205 mm
• Stair Width (lower stair)                                                                Swing Type
• Stair Width (upper stair)                                                                 1,500 mm
                                                                                            1,500 mm
Platform Landing:
• Depth                                                                                      1,800 mm
•Width                                                                                       1,850 mm
•Railing                                                                     Sliding bumper with stainless steel handrails
Canopy:
• Type                                                          Option of See through polycarbonate or Aluminum Open Canopy
• Tint                                                                               Greyish Blue/ Green
• Interfacing                                                                           Sliding canopy
Chassis:
• Make/Model                  ISUZU NPR 71L or (user to specify)
• Engine                      Isuzu 4HG1
• Transmission                Manual with option of Automatic Transmission

    Electrical System         24V, Standard Hard Wiring with option of PLC (Programmable Logic Controller)
BAGGAGE TROLLEY

                  Specification
                  Payload               2,500 kg
                  Steering System      Turntable
                  Towing Speed         40 km/h
                  Parking Brake        Tow Bar Actuated
                  O/A Height           1,905 mm
                  O/A Length           2,473 mm
                  O/A Width            1,575 mm
                  Body Base Height     610 mm
                  Min. Towing Height   300 mm
                  Tires (U-Lug)        Solid Cushion Type
                  Coupling System      Tow Hitch
BAGGAGE TROLLEY

                             GENERAL
                             The AEREX baggage trolley specifications are for a standard version.
                             Baggage Trolley can be tailored to meet individual requirement.
                             The trolley is designed for transportation of baggage and light cargo with a
                             minimum payload of 2500 kg.
                             The trolley is rugged and is suitable and treated for outdoor use.
                             The design is suitable to be towed (up to 4 trolleys) at 40 km/h on bitumen
                             Roads.


                                       TECHNICAL DATA FOR AEREX BAGGAGE TROLLEY
                                                                                     SPECIFCATION


                                      Unladen Weight                                 1,000 kg (approx.)
                                      Payload                                            2,500 kg

                                      Steering System                        Tow bar on ball race type turn able

                                      Towing Speed                                        40 km/h

                                      Parking Brakes                                 Tow bar actuated

                                      Overall Dimensions:
                                      • Length                                           2,473 mm
                                      • Width                                            1,575 mm
                                      • Height                                           1,905 mm

                                      Minimum Towing Height                         30 mm from ground

                                      Tyre (U-Lug)                                    Pneumatic Tyres




                        UMW ADVANTECH SDN. BHD.
                  AEREX GSE – Sales, Marketing & Manufacturing
                       Jalan Utas 15/7, 40915 Shah Alam,
                             Selangor , MALAYSIA.
                              Tel: +603 5163 5000
                              Fax:+603 5510 4381
                       Website: www.umw-advantech.com
PALLET DOLLY
PALLET DOLLY
                              GENERAL
                              The AEREX pallet dollies specifications are for a standard version. Pallet
                              Dollies can be tailored to meet individual requirement.
                              The pallet dollies are used for transportation of unitized cargo with a
                              minimum payload of 7000kg.
                              The dolly is rugged and is suitable and treated for outdoor use.
                              It is capable of handling LDs ranging from LD1 to LD10.
                              The construction of the dolly is from steel frames fitted with gravity rollers.
                              Locking of pallets and LDs are by means of butterfly locks and side restrains.
                              The front wheels are of swiveled type and rear fixed. Steering is done
                              through the 2 front swivel wheels maintaining identical tracking when being
                              towed.

                                       TECHNICAL DATA FOR AEREX PALLET DOLLEY
                                                                               SPECIFCATION


                                Unladen Weight                                 1,000 kg (approx.)
                                Payload                                            2,500 kg

                                Steering System                        Tow bar on ball race type turn able

                                Towing Speed                                        40 km/h

                                Parking Brakes                                 Tow bar actuated

                                Overall Dimensions:
                                • Length                                           2,473 mm
                                • Width                                            1,575 mm
                                • Height                                           1,905 mm

                                Minimum Towing Height                         30 mm from ground

                                Tyre (U-Lug)                                    Pneumatic Tyres


                     UMW ADVANTECH SDN. BHD.
               AEREX GSE – Sales, Marketing & Manufacturing
                    Jalan Utas 15/7, 40915 Shah Alam,
                          Selangor , MALAYSIA.
                           Tel: +603 5163 5000
                           Fax:+603 5510 4381
                    Website: www.umw-advantech.com

				
DOCUMENT INFO