Docstoc

ROUTE TO CROPDESIGN HEADQUARTERS

Document Sample
ROUTE TO CROPDESIGN HEADQUARTERS Powered By Docstoc
					                 ROUTE TO CROPDESIGN HEADQUARTERS




By car
From Brussels/Bruxelles
Follow the highway E40 in the direction of Oostende. Take exit 16 (Merelbeke/Antwerpen/Zelzate/
Eeklo/Gent). At the end of the exit road drive onto the R4 and follow the direction of
Eeklo/Gent/Merelbeke (take second road to the right after the highway exit). Follow the R4 for about
5km (3 miles) along the canal and take exit N60 in the direction of Oudenaarde/Zwijnaarde. Follow the
N60 for about 1km until you reach an elongated roundabout. At the end of the elongated roundabout,
make a U-turn back to the direction from where you came and drive into the Technology Park at your
right hand side (follow the “Technologiepark” signs). Once inside Technologiepark, keep following the
CropDesign signs.



           CropDesign N.V.· Technologiepark 3 · B-9052 Gent · Belgium · t+32 9 242 34 00 · f+32 9 242 34 89
                                                rpr gent 0463 222 213
                             http://www.cropdesign.com · e-mail:info@cropdesign.com
From Oostende/Brugge
Follow the highway E40 in the direction of Brussels. Take exit 14 (Deinze/ Gent-Expo). Take exit Gent. At
the end of the exit road turn right on the N43. Follow the N43 in the direction of Gent until you reach a
large roundabout. At the roundabout take direction N60/ Oudenaarde (immediately to your right hand
side). Follow the N60 for about 2km until you reach an elongated roundabout. At the end of the
elongated roundabout, make a U-turn back to the direction from where you came and drive into the
Technology Park at your right hand side (follow the “Technologiepark” signs). Once inside
Technologiepark, keep following the CropDesign signs

From Antwerpen
Follow the highway E17 in the direction of Gent/ Kortrijk/ Lille. Take exit 8 “De Pinte/ Nazareth”. At the
end of the exit road, take direction Gent (turn left). Follow the N60 for about 3km until you reach an
elongated roundabout. On the roundabout take the second road to the right that leads into the
Technology Park (follow “Technologiepark” signs). Once inside Technologiepark, keep following the
CropDesign signs

From Lille/Kortrijk
Follow the highway E17 in the direction of Antwerpen. Take exit 8 “De Pinte/ Nazareth”. At the end of
the exit road, take direction Gent (turn left). Follow the N60 for about 3km until you reach an elongated
roundabout. On the roundabout take the second road to the right that leads into the Technology Park
(follow “Technologiepark” signs). Once inside Technologiepark, keep following the CropDesign signs

By public transport
From Brussels International Airport
In Brussels International Airport (Zaventem), take either a direct train to Gent or a train with a stop-over
at Brussel Zuid/Bruxelles Midi. There are about three trains per hour and the travel time is either 50, 60
or 70 minutes. Get off at the railway station “Gent-St. Pieters”. See below for continuation of the travel
route.

From Gent St. Pieters railway station
At the railway station take either bus nr. 70, 71 or 72. Get out at the third bus stop on the Tramstraat
(=street name) in Zwijnaarde (=municipalty name), in front of the research building of Chevron-Texaco.
Get into the “Technologiepark” entrance road that leads to the Chevron-Texaco research building.
CropDesign is located in the last building on the right side of the “Technologiepark” entrance road.
Alternatively take a taxi to CropDesign (address : Technologiepark 3, Gent-Zwijnaarde). It takes about 7
minutes by taxi and the cost is about 10 Euro.




            CropDesign N.V.· Technologiepark 3 · B-9052 Gent · Belgium · t+32 9 242 34 00 · f+32 9 242 34 89
                                                 rpr gent 0463 222 213
                              http://www.cropdesign.com · e-mail:info@cropdesign.com

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:4
posted:4/7/2010
language:English
pages:2