Hacking TRW by amir88xx

VIEWS: 17 PAGES: 2

									<-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
=-=-=-=>
  AN EXPIRIENCED HACKER'S GUIDE TO:
                            H A C K I N G   T R W
                             Written by Minotaur
                                 Release 1.0
<-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
=-=-=-=>

INTRODUCTION
------------
    Unlike most of my previous text files this text file has been written
for expirienced hackers. What does that mean? Well if you are a
beginner that means you probably wont understand most of this and should
not attempt to hack TRW. If you are expirienced then go right ahead...


HACKING TRW
-----------
When you connect up to TRW, the dialup will identify itself with the
message "TRW". It will then wait for you to type the appropriate answer-
back (such as CTRL-G). Once this has been done, the system will print
out
some numbers and then "CIRCUIT BUILDING IN PROCESS". After this, it
clears
the screen with a CTRL-L followed by a CTRL-Q. After it sends you the
CTRL-Q, it is ready for you to log in. You first type in the 4 character
identifying
code for the location you are.

SOME   EXAMPLES ARE:
TCA1   - For certain California Subscribers.
TCA2   - A second California TRW system.
TNJ1   - A New Jersey Database.
TGA1   - A Georgia Database.

     You should then hit return. On the next line, you must type your 3
character option. Most requests use the RTS option. OPX, RTX, and some
others exist. (Note: TRW accepts an A, C, or S as the X in some
options.) Then you would then type in a 7 digit subscriber code followed
by a 3-4 character password. It seems that if you manage to get hold of
a TRW printout (by trashing a business), the subscriber code will be on
it, leaving only a 3-4 character password for you to hack.

EXAMPLE LOGON
-------------
Set your communications program as follows:
Half Duplex, Even Parity, 7 Data Bits and 2 Stop Bits


ATDT 741-6016
CONNECT

System: TRW
User : CTRL-G
System: -1017-101-

        Circuit building in process

        CTRL-L CTRL-Q

User : TCA1 (RETURN)
System:
User : RTS 1234567ABC (RETURN) CTRL-S

NOTE: If you: **system error** it just means you entered an invalid code,
and it will start you over.

CONCLUSION
----------
    That's it! I hope this text file will be able to help you get
started on hacking TRW. If you have any problems and have access to the
Internet I can be mailed at the following address:
moon!cyberden!minotaur@well.sf.ca.us
And remember...
              This is file IS NOT for info purposes only!

                                                     +++ MINOTAUR +++

								
To top