Docstoc

hand - PDF

Document Sample
hand - PDF Powered By Docstoc
					                                                                                          Hand Protection




MSA provides a selected range of quality industrial safety hand protection work gloves.
Quality raw materials are combined providing a consistent ongoing high performance and are compliant to the
AS/NZS 2161 standards where possible.




Customer Service: 1300 728 672 • Website: www.msa.net.au • New Zealand Customer Service 0800 441 335          116
Hand Protection
AUSTRALIAN/NEW ZEALAND OCCUPATIONAL PROTECTIVE GLOVE STANDARDS


Overview                                                            AS/NZS 2161.3 Occupational Protective Gloves -
                                                                    Protection Against Mechanical Risks (EN 388)
The Australian/New Zealand Glove Standards
AS/NZS 2161 have been reproduced from the equivalent                This standard specifies requirements, test methods, marking
European Standards.                                                 & information for protective gloves against the mechanical
                                                                    risk of Abrasion, Blade Cut, Tear & Puncture.
AS/NZS 2161 consists of the following:
                                                                    Defined as follows:
AS/NZS 2161.2 Occupational Protective Gloves -
General Requirements (EN 420)                                       • Abrasion Resistance - Is a measure of the number of
                                                                      cycles required for breakthrough to occur. Breakthrough
This standard covers the general requirements for                     is understood to mean when a hole is worn through the
Glove Construction, Ergonomy, Design & Sizing,                        test specimen
Innocuousness of Protective Gloves, High Visibility,
Comfort & Efficiency, Marking & Information applicable              • Blade Cut Resistance - Is a measure of the materials cut
to all Occupational Protective Gloves.                                resistance index. Specimens are cut by a counter-rotating
                                                                      circular blade, which moves with an alternating motion
Defined as follows:                                                   under a specified load.
General Requirements:                                               • Tear Resistance - Is a measure of the force necessary to
• Protective Gloves are designed, manufactured & are                  propagate a tear in a specimen slit halfway along its length.
  suitable for its intended use.                                    • Puncture Resistance - Is a measure of the force exerted
• When the glove construction includes seams, the material            by a steel stylus of defined dimensions to puncture a test
  & strength of the seams shall be such that the overall              specimen held on a retaining device.
  performance of the glove is not significantly decreased.          Test results are reported as performance ratings, the higher
• Protective Gloves provide protection when used to the             the rating the greater resistance/protection.
  manufactures instructions, without harm to the end
  user when so used.
• Glove sizing conforms to specifications in relation to
  hand circumference & minimum length requirement.
• Marking information covering the name, trademark or other
  means of identification, code/part number, size.
• Packaging information requirements & instructions for Use




                                                                                               (EN 374)




117                           Customer Service: 1300 728 672 • Website: www.msa.net.au • New Zealand Customer Service 0800 441 335
                                                                                                     Hand Protection
with CARBTEX
                          MSA (Aust.) Pty. Limited


Carbtex Gloves significantly increase the wearer level of protection, against intense heat,
flames and thermal radiant hazards and electric arc. NFPA 70E standards compliant providing
Arc Thermal Performance Value (ATPV) Level 4: 40 cal/cm2. The heavy gauge knitted
Carbtex gloves are soft and durable. Available in 3 sizes, 40cm in length.

Advantages:                                                     Applications:
•   Inherently FR                                               • Welding
•   Does NOT melt or drip                                       • Foundries
•   High Flash fire protection                                  • Smelters & Steel Mills
•   NFPA 70E Level 4
                                                                • Electric Utilities
•   Cut Resistant
                                                                • Mining
•   Breathable
                                                                • Oil, Gas and Petrochemical
•   Low Moisture Retention
•   Durable                                                     • Construction
•   Comfortable                                                 • Fire & Defence
•   Economical
                                                                  Part No.        Description
Glove Carbtex FR
                                                                  766084S         Glove Carbtex Knit 40cm Small - Medium
A FR glove for Electric Arc & Mechanical Flash fire
                                                                  766084L         Glove Carbtex Knit 40cm Large
providing Cut-Resistant protection.
                                                                  766084X         Glove Carbtex Knit 40cm Extra Large




Lightweight FR Sleeve
A lightweight FR sleeve for Flash Fire and Cut-Resistant performance. Complete with Kevlar Cut Resistant knit palm
with thumb hole allowance.
                                                                                                                           Sleeve
Fabric -             with UL Listed Thread
- Nomex® - UL Listed


Advantages:
•   Inherently FR
•   Does NOT melt or drip
•   High Flash fire protection
•   NFPA 70E Level 2                      Washing Instructions:
•   Cut Resistant                         •   Machine wash warm (60ºC max)
•   Breathable                            •   Tumble dry low (130ºC max)
•   Low Moisture Retention                •   Can be dry cleaned
•   Durable                               •   Use any detergent, rinse thoroughly
•   Comfortable                           •   Do not use fabric softeners
•   Economical                            •   Iron on cool to medium, if needed

Applications:
•   Welding                                   Part No.      Description
•   Automotive Industry                       765694M       Sleeves, Carbtex, NuGard, FR, Medium, Pair
•   Metal Fabrication
                                              765694L       Sleeves, Carbtex, NuGard, FR, Large, Pair
•   Bottling Plants




Customer Service: 1300 728 672 • Website: www.msa.net.au • New Zealand Customer Service 0800 441 335                                118
                                                                                             Hand Protection
Cotton and Leather Gloves

Split Leather Premium Candy Stripe Glove
General purpose medium grade work glove in a generous men’s size. Working
area is of a selected split leather and the candy striped cotton back promotes
air flow for comfort, knuckle bar provides additional protection.
Suitable for the following applications:
• Building & Maintenance material handling
• Warehousing
• Light Engineering

Features:                                          Markets:
•   Quality Leather split palm                                                                 Premium - 220815
                                                   • Construction
•   Generous men’s hand size
                                                   • Mining
•   Candy striped cotton back for airflow
                                                   • Oil, Gas & Petrochemical
•   Knuckle bar and fingertip protection

    Part No.          Description
    220815            Glove, Candy Stripe, Select Split, Leather, Rubberised Cuff, Premium
    762075            Glove, Candy Stripe, Leather, Cotton, Budget



Split Leather and Cotton Polishers
Quality select split leather, double reinforced leather palm and thumb,
forefinger and knuckle bar protection. Canvas back and cuff,
generous large size.

Markets:
• Construction
•   General Purpose
•   Maintenance
•   Lumber Industry
•   Mining

    Part No.          Description
    220812            Glove, Polisher, Leather, Cotton



Mustang
Quality select split leather, canvas back and cuff, knuckle bar
protection, generous large size.
Markets:
• Construction
• Mining
• Oil, Gas & Petrochemical


    Part No.                Description
    226545                  Glove, Mustang, Leather, Double Palm




Customer Service: 1300 728 672 • Website: www.msa.net.au • New Zealand Customer Service 0800 441 335              120
Hand Protection
Leather Glove
Grand Prix Premium Beige Driver
Applications:                      Markets:
•    Drivers                       • Construction
•    Forklift Operators            • Mining
•    Baggage Handlers              • Oil, Gas and Petrochemical
•    Storeman
•    Yard Workers
•    General Industry


Features:
1. “A” Grade Cow Grain Leather Driver Glove
2. Consistent thickness of “A” Grade Cow Grain Leather
3. Functional elastic shirred wrist
4. Available in 4 sizes
5. Reinforced stitching for greater seam strength
6. CE Standard compliant
   EN388/03 (Protective Gloves against Mechanical Risks)
   and EN 420/03 (Gloves General Requirements).
7. Comfortable soft feel
8. Generous sizing, manufactured to CE standards
   sizing requirement
                                                                                    3123
9. Excellent durability and abrasive resistance
10. Wing thumb, offering comfort & good flexibility
                                                                                                                                -3
     Part No.       Description                                                                                         -2
                                                                                                                        -1
     225030S        Glove, Grand Prix, Driver, Small                                                               -3

     225030M        Glove, Grand Prix, Driver, Medium
     225030         Glove, Grand Prix, Driver, Large
     225030X        Glove, Grand Prix, Driver, Extra Large




121                            Customer Service: 1300 728 672 • Website: www.msa.net.au • New Zealand Customer Service 0800 441 335
Hand Protection
Rodeo Driver
•   Rodeo Drivers Glove                 Applications:
•   Cow Grain B/C Leather Palm          •   Mine Sites
•   Split Leather Back                  •   Construction Sites
•   Keystone Thumb                      •   Logistics
•   Shirred Wrist                       •   Workshops
Markets:
• Construction
• Mining                            Part No.          Description
• Oil, Gas and Petrochemical
                                    227507            Glove, Rodeo, Driver, Leather, Large




Grain Palm Split Leather Back Driver
• Select Quality Cow Grain and Split Leather
• Natural Colour
• Split Leather Back
• 3 sizes Med, Large and X Large
• Wing Thumb, Shirred Wrist


    Part No.          Description
    229835M           Glove, Driver, Leather Natural, Medium
    229835            Glove, Driver, Leather Natural, Large
    229835X           Glove, Driver, Leather Natural, Extra Large




Pigskin Split Driver
•   Selected split                          Applications:
•   Large hand size                         •   Storeman
•   Unlined                                 •   Gardeners
•   Shirred Wrist                           •   Light Engineering
                                            •   Horticulture
Markets:
• Construction
• Mining
• Oil, Gas and Petrochemical

    Part No.     Description
    221434       Glove, Pigskin Driver, Large




123                            Customer Service: 1300 728 672 • Website: www.msa.net.au • New Zealand Customer Service 0800 441 335
 286
263S
 286
263M
 286
263L
 286
263X
 286X
263X
Hand Protection
Flexifit Foam Black and Grey Nitrile Glove
Flexifit Gloves offer excellent abrasion resistance, ultra lightweight with superior secure grip in dry, wet and oily conditions.
Flexifit Gloves provide workers with a maximum level of comfort, fit, sensitivity and dexterity with minimum hand fatigue.
• CE compliant EN 388-03 (Protection Against Mechanical Hazards)
• Oil Resistant Nitrile palm coating on a stretch seamless low lint nylon liner

Features:                                     Applications:
1.   Black or grey foam nitrile coating       •   Component Assembly
2.   Close comfortable fit                    •   Automotive Industry
3.   Low lint nylon liner                     •   Packing and Inspection
4.   Elasticised knit wrist                   •   Delicate and precise operations
5.   Machine washable                         •   Machine operation

     Part No.    Description
     Grey
     766043      Glove, Flexifit, Foam Knit, Extra Small, Grey
     765134      Glove, Flexifit, Foam Knit, Small, Grey
                                                                       4121
     765135      Glove, Flexifit, Foam Knit, Medium, Grey
     765136      Glove, Flexifit, Foam Knit, Large, Grey
     765137      Glove, Flexifit, Foam Knit, Extra Large, Grey
     Black
     766044      Glove, Flexifit, Foam Knit, Extra Small, Black
     765265      Glove, Flexifit, Foam Knit, Small, Black
     765266      Glove, Flexifit, Foam Knit, Medium, Black
     765267      Glove, Flexifit, Foam Knit, Large, Black
     765268      Glove, Flexifit, Foam Knit, Extra Large, Black


Light Nitrile Palm Coated Gloves
Nitrile dipped, textured finished lighweight glove offering
good grip, dexterity and flexibility.

Typical Applications:                             Markets:
• Abrasive Metals/Castings                        • Mining
• Assembly/Packing                                • Maintenance
• Fabricated Products                             • Metal Processing
• Bricks and Block applications
• General Industry/Maintenance

Specifications and Features:                                                                                                 3111
• CE compliant
  EN 388-03 (Protection Against Mechanical Hazards)                  Part No.       Description
• Good grip and abrasion resistance                                  227002S        Glove, Nitrolite Poly Cotton Knit Wrist Small
• Comfort jersey lining                                              227002M        Glove, Nitrolite Poly Cotton Knit Wrist Medium
• 27cm overall length                                                227002L        Glove, Nitrolite Poly Cotton Knit Wrist Large
• Multi-purpose , hard wearing                                       227002X        Glove, Nitrolite Poly Cotton Knit Wrist Extra Large
• Knit wrist



125                            Customer Service: 1300 728 672 • Website: www.msa.net.au • New Zealand Customer Service 0800 441 335
                                                                                                 Hand Protection
Heavy Nitrile Palm Coated Gloves Knit Wrist & Open Cuff
Heavy duty nitrile provides excellent cut and abrasion resistance.
Jersey cotton liner providing superior soft comfort.

Applications:
•   Abrasive Metals/Castings
•   Transport
•   Construction
•   Fabricated Products
•   Bricks and Block applications
• General Industry

Features:
• CE compliant
  EN 388-03 (Protection Against Mechanical Hazards)                            4322

• Nitrile palm coated
                                                                    Part No.           Description
• Knit Wrist
• Soft jersey liner                                                 Open Cuff
• Excellent grip and dexterity                                      227003M            Glove Nitrogard PC Open Cuff Medium
• Comfortable ergonomic fit and good flexibility                    227003L            Glove Nitrogard PC Open Cuff Large
Markets:                                                            227003X            Glove Nitrogard PC Open Cuff Extra Large
•   Construction                                                    Knit Wrist
•   Mining                                                          227004S            Glove Nitrogard PC Knit Wrist Small
•   Oil, Gas and Petrochemical                                      227004M            Glove Nitrogard PC Knit Wrist Medium
•   Foundries
                                                                    227004L            Glove Nitrogard PC Knit Wrist Large
•   Smelters and Steel Mill Operations
                                                                    227004X            Glove Nitrogard PC Knit Wrist Extra Large
•   Materials Handling


Fully Coated PVC Single Dipped Glove
Single dipped PVC glove, smooth finish providing protection against chemical
and mechanical hazards, good dexterity, comfort and flexibility.
Applications:                            Markets:
•   Light chemical handling              • Mining
•   Fisheries                            • Maintenance
•   Automotive                           • Oil, Gas and Petrochemical
•   Brick works
•   Cleaning
• Utilities                                                                                                                  45cm
Features:
• CE compliant
  EN 388-03 (Protection Against Mechanical Hazards)                                   27cm
• CE compliant
  EN 374-03 (General Chemical Protection)
• Abrasion resistance
• Wet and Dry grip
• 27cm or 45cm overall length          Part No.       Description
• Cotton lining                        221741         GLOVE, PVC, OPEN CUFF, 27CM, RD
• Flexible, Durable
                                       220615         GLOVE, PVC, OPEN CUFF, 45CM, RD
• Size - Large                                                                                         4121             6662




Customer Service: 1300 728 672 • Website: www.msa.net.au • New Zealand Customer Service 0800 441 335                                126
Hand Protection
Green Double Dipped PVC Glove
Double Dipped PVC Glove with textured finish providing wet and dry
grip, protection against chemical and mechanical hazards, robust
glove with high abrasion resistance.
• CE compliant EN 388-03 (Protection Against Mechanical Hazards)
• CE compliant EN 374-03 (General Chemical Protection)                                                                      45cm
                                                                                      27cm
• Interlock Lining
• Fully Coated




Applications:
• Light chemical handling
• Fisheries                                                                    4121                 6662

• Automotive
• Painting and Concreting
                                            35cm
• Wet work
• Brick works                                                               Part No.              Description
• Cleaning                                                                  762515                Glove PVC Green Double Dipped 27cm
• Utilities                                                                 762513                Glove PVC Green Double Dipped 35cm
                                                                            762514                Glove PVC Green Double Dipped 45cm

PVC Gard Gloves
                                                      PART NUMBERS & SUITABILITY CHART
                                           METAL GARD     SOLV GARD                                               METAL GARD       SOLV GARD
  ALCOHOLS                                                                     Hydrocarbons
  Amyl, Butyl, Hexyl, Isopropynl,                                              Toluene, Benzene, Styrene             N.R.              E
  methyl 6% aq. soin.                           E              E               Miscellaneous
  CAUSTICS                                                                     Lacquer Thinner                        F               E
  Ammonium, Hydroxide, Sodium                                                  Cutting Oil                            E               E
  Hydroxide 50%, Potassium Nitrate              E              E               Battery Acid                           E               E
  Chlorinated Solvents                                                         Phenol                                 G               G
  Carbon Tetrachloride, Perchlorethylene                                       Insecticides                           E               E
  Trichlorethylene                             N.R.            E               Printing Ink                           E               E
  KETONES                                                                      Synthetic Detergents                   E               E
  M.E.K., M.I.K., Acetone                      N.R.            E               Paraffin                               E               E
  Petroleum SOLVENTS                                                           Glycerine                              E               E
  Petrol, Naptha, Kerosene,                                                    Vegetable Oils                         E               E
  Mineral Thinner, Turpentine                   G              E               Animal Oils                            G               G
  Organic acids                                                                Creosote                               G               G
  Citric, Formic, Tannic, Acetic                E              E               Carbon Dioxide                         E               E
  Inorganic Acids                                                              Vinegar                                E               E
  Hydrochloric                                  E              E               Linseed Oil                            E               E
  Sulphuric 10%-80%                             E              E               Hexane                                 G               G
              90%-95% @ 20oC                    G              E               Photographic Emulsion                  G               G
  Sulphurous                                    E              E               Tanning Extracts                       E               E
  Nitric 10%                                    E              E               Wine & Spirits                         E               E
  Nitric 70%                                    F              G
  Chromic                                       G              E

                                                    E- Excellent F- Fair G- Good NR- Not recommended


127                                  Customer Service: 1300 728 672 • Website: www.msa.net.au • New Zealand Customer Service 0800 441 335
Hand Protection
PVC Gard Gloves



                                                                     Metalgard
                                                                     Ideal for the heavy manufacturing industry to handle metal
                                                                     plates and castings. Manufactured using MSA’s exclusive
                                                                     high density resin/plasticiser ration formulation for extra
                                                                     durability and abrasion resistance.
                                                                     Green in colour, fully coated.
                                                                     Available in a choice of sizes and lenghts.




    Part No.     Description                                                    Applications:
    220875       Glove, Metalgard Handsize 8.5 Length 27cm                      • Mine Sites
                                                                                • Constuction Sites
    220876       Glove, Metalgard Handsize 9.5 Length 27cm
                                                                                • Workshops
    220879       Glove, Metalgard Handsize 8.5 Length 35cm
    220880       Glove, Metalgard Handsize 9.5 Length 35cm
    220881       Glove, Metalgard Handsize 8.5 Length 45cm
    220882       Glove, Metalgard Handsize 9.5 Length 45cm




Solvgard Glove
Provides protection against most chemicals, petroleum and paint solvents.
The unique formulation maximises resistance against degration or glove
hardening to improve comfort and dexterity. Ideal for use in the automotive
industry, oil refining and paint manufacturing. Durable and can be laundered.
Blue in colour, fully coated and available in a variety of lengths and sizes.

Applications:                     Markets:
•   Mine Sites                    •   Construction
•   Construction Sites            •   Defence
•   Workshops                     •   Mining
•   Automotive Industry           •   Oil, Gas and Petrochemical
•   Oil Refining
•   Paint Manufacturing

    Part No.     Description
    224248       Glove, Solvgard, Handsize 8.5 Length 27cm
    224249       Glove, Solvgard, Handsize 9.5 Length 27cm
    224252       Glove, Solvgard, Handsize 8.5 Length 35cm
    224253       Glove, Solvgard, Handsize 9.5 Length 35cm
    224336       Glove, Solvgard, Handsize 8.5 Length 45cm
    224337       Glove, Solvgard, Handsize 9.5 Length 45cm




Customer Service: 1300 728 672 • Website: www.msa.net.au • New Zealand Customer Service 0800 441 335                               128
Hand Protection
Welding Gloves
Flashmaster TIGmate
TIG glove manufactured from select grain leather, providing excellent
sensitivity, dexterity, comfort and protection.
•   Premium Grade Select Grain           Applications:
•   Full Dexterity
                                         •   Tig Welding
•   Kevlar Sewn
•   40cm Overall Length                  •   Oxy Welding
                                         •   Welding Industry
                                         •   General Industry

    Part No.     Description
    227765L      Glove, Flashmaster, TIGmate, Large


Blue Welding Gauntlet
Blue/Gold Welding Gauntlet providing excellent protection from
radiant heat and hot metal splash.
Features:
•   Kevlar Stitching
•   Reinforced Double Palm and Thumb
•   Full Lining
•   Generous Hand Size                             Markets:
•   Quality Split Cow Leather                      •    Foundries
•   Comfort with Heavy Duty Palm Protection        •    Construction
•   40cm Overall Length                            •    Engineering
                                                   •    Automotive Industry
Typical Applications:
                                                   •    Petrochemical Industry
•   Welding and Heat
•   Flame and Spark Protection
•   Mig, Oxy and Arc Welding                     Part No.    Description
•   Engineering and Maintenance
•   Smelters and Foundries                       228370      Glove Welders Blue Reinforced Palm


Premium Quality Welding Gauntlet
Red Premium quality cow split leather Welding Gauntlet providing excellent protection
from radiant heat and hot metal splash
Features:                                           • Engineering and Maintenance
•   Kevlar Stitching                                • Smelters and Foundries
•   Reinforced Double Palm and Thumb                Markets:
•   Full Lining
                                                    •   Foundries
•   Generous Hand Size
                                                    •   Construction
•   Quality Split Cow Leather
                                                    •   Engineering
•   Comfort with Heavy Duty Palm Protection
                                                    •   Automotive Industry
•   40cm Overall Length
                                                    •   Petrochemical Industry
Typical Applications:
• Welding and Heat                     Part No.          Description
• Flame and Spark Protection
                                       224518            Glove, Flashmaster, Welding Gauntlet Large
• Mig, Oxy and Arc Welding



129                            Customer Service: 1300 728 672 • Website: www.msa.net.au • New Zealand Customer Service 0800 441 335
                                                                                           Hand Protection
Synthetic Glove

Mechanics Anti-Shock Glove
The MSA Mechanics style glove features
gel inserts to provide an anti shock feature.
The gel inserts are ergonomically positioned
to reduce impact and lessen wearer fatigue.
The inserts span the palm of the glove and
up into wrist area. The design of the glove
makes it ideal for use in the building,
construction, maintainance, mining, automotive
and materials handling plus many other work areas.
For added protection of the most vulnerable areas
of the hand MSA has provided high density webbing rolls
over the knuckles, additional material over the finger tips
and a contoured pulse guard with a Velcro closing tab
across the inside of the wrist.
Silicone pads on the inside of the finger tips provided added grip
while the reinforced double stitching and synthetic leather palm
mean excellent durability and abrasion resistance.
The visibly safe bright colour of the glove makes it easily
recognisable and the venting in the finger sidewalls gives
increased breathing for wearer comfort. All in the entire MSA
Anti-shock glove is a high performing all rounder suited to
a wide variety of applications at a very competitive price.

Applications                                                         Part No.   Description
Ideal for building, construction, maintenance, mining,               765447S    Glove, Mechanic Gel Inserts Velcro Small
automotive and materials handling.
                                                                     765447M    Glove, Mechanic Gel Inserts Velcro Medium

Features and Benefits                                                765447L    Glove, Mechanic Gel Inserts Velcro Large
• Gel inserts absorbs impact and reduce wearer fatigue               765447X    Glove, Mechanic Gel Inserts Velcro Extra Large
• Knuckle bar protection with high-density webbing                   765447XX   Glove, Mechanic Gel Inserts Velcro 2X Large
• Silicone fingertip pads provide added grip
• Pulse guard with Velcro closing tab protects the
  inside wrist area
• Vented finger sidewalls provide increased breathing
  and comfort
• Reinforced double stitching and synthetic leather palm
  increase durability and abrasion resistance.




Customer Service: 1300 728 672 • Website: www.msa.net.au • New Zealand Customer Service 0800 441 335                             130

				
DOCUMENT INFO