Expansion Joints Part Number:
Canplas Industries Ltd
500 Veterans Drive (Canada)
Barrie, ON (800) 461-5300
For Vertical Installations For Horizontal Installations
Type II - Hub x Hub Hanger/Bracket
(refer to table 1) Espansion Joint Body (8" Travel)
1. Locate unit (plunger side out) preferably before the first fixture.
2. Using appropriate hanger brackets, secure expansion joint body (outer section) in place.
3.) On the branch side of the expansion joint, use appropriate hanger brackets that allow Plunger / Piston
the branch assembly to move freely.
4. Push plunger (inner piston section) until unit is fully closed.
5. Pull plunger back out a distance according to the temperature at time of installation (refer to table 1).
Type I Type I Type II
(H x Spg) (H x H) (H x H)
Hanger/Bracket Hanger/Bracket Hanger/Bracket
Type I - Hub x Hub Type I - Hub x Spigot
(3" Travel) (3" Travel)