TRIBOCHEM INC. MATERIAL SAFETY DATA SHEET LUMINATE AUTO POLISH Date Prepared: January 27, 2009 Supersedes: May 24, 2007 1. PRODUCT INFORMATION Product Identifier: Luminate Auto Polish Application and Use: Auto polish Product Description: Solvent external invert emulsion REGULATORY CLASSIFICATION WHMIS Information: B.3 D.2B TDG Information: Rail/Road Not Regulated in Canada. Canadian Environmental Protection Act (CEPA) All components of this product are either on the Domestic Substances List (DSL) or exempt EMERGENCY TELEPHONE NUMBER MANUFACTURER/SUPPLIER (519) 740-3686 Tribochem Inc. 131-6 Sheldon Drive Cambridge, Ontario N1R 6S2 2. REGULATED COMPONENTS The following component data is defined in accordance with sub-paragraph 13 (a) (I) to (iv) of the Hazardous Products Act. NAME % CAS Light distillate – 20-30 64742-47-8 hydrotreated ________________________________________________________________ 3. TYPICAL PHYSICAL AND CHEMICAL PROPERTIES Physical State: Liquid Density: (g/cc) 1 Vapour Pressure: (mm) N. D. Solubility in Water: Resists dispersion Boiling Point: 100° C Freezing/Melting Point: 0°C Vapour Density: (air=1) N. D. Evaporation Rate, n-Butyl Acetate = 1: N. D. pH: n.a. Appearance: Peach colored cream ________________________________________________________________________ 4. HEALTH HAZARD INFORMATION NATURE OF HAZARD INHALATION: Liquid or spray mist may produce tissue damage, particularly on mucus membranes of eyes, mouth and respiratory tract. EYE CONTACT: Extremely hazardous in case of eye contact. Irritant and causes corneal damage. SKIN CONTACT: Prolonged or repeated contact may irritate skin INGESTION: Hazardous in case of ingestion. CHRONIC: Repeated or prolonged contact with spray mist may produce respiratory tract irritation leading to frequent attacks of bronchial infection. 5. FIRST AID MEASURES INHALATION: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. EYE CONTACT: Check for and remove any contact lenses. Flush with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. COLD water may be used. DO NOT use an eye ointment. Seek medical attention. SKIN CONTACT: In case of contact, wash with soap and water and flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. COLD water may be used. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention if required. INGESTION: DO NOT induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. Seek medical attention. 6. PREVENTATIVE AND CORRECTIVE MEASURES PERSONAL PROTECTION: Neoprene or isoprene gloves are recommended. ENGINEERING CONTROLS: Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-station location. ELECTROSTATIC ACCUMULATION HAZARD: None HANDLING, STORAGE AND SHIPPING Keep container closed. Handle and open containers with care. Store in a cool, well ventilated place away from incompatible materials. Keep from freezing. DO NOT pressurize, cut, heat or weld containers. Empty product containers may contain product residue. DO NOT reuse empty containers without commercial cleaning or reconditioning. SPILL CONTROL AND DISPOSAL Dyke and recover. Consult an expert on the disposal of recovered material. Ensure disposal in compliance with government regulations and ensure conformity to local disposal regulations. Notify the appropriate authorities immediately. Take all additional action necessary to prevent and remedy the adverse effects of the spill. LAND SPILL Keep public away. Prevent additional discharge of material, if possible to do so without hazard. Contain spilled liquid with sand or earth. Recover by pumping or by using a suitable absorbent. 7. FIRE AND EXPLOSION HAZARD Flash Point and Method: N/A Autoignition Temperature: N/A Flammable Limits (Upper): N/A Flammable Limits (Lower): N/A GENERAL HAZARDS: Not expected to be flammable due to high water content FIRE FIGHTING: Keep drums cool with water spray HAZARDOUS COMBUSTION PRODCUTS: No unusual products 8. REACTIVITY DATA GENERAL: This product is stable and hazardous polymerization will not occur. INCOMPATIBLE MATERIALS AND CONDITIONS TO AVOID: Strong concentrated acids HAZARDOUS DECOMPOSITION: None 9. NOTES No comments at this time 10. PREPARATION Date Prepared: January 27, 2009. Supersedes: May 24, 2007 Prepared by: Vincent J. Curtis (519) 740-6386 CAUTION: The information contained herein relates only to this product or material and may not be valid when used in combination with any other product or material in any process. If the product is not to be used for a purpose or under conditions which are normal or reasonably foreseeable, this information can not be relied upon as complete or applicable. For greater certainty, uses other than those described in “Application of Use” of section 1 must be reviewed with the supplier. The information contained herein is based information available at the indicated date of preparation.