Docstoc

yakima-holdup-bike-rack-instructions-manual-pdf

Document Sample
yakima-holdup-bike-rack-instructions-manual-pdf Powered By Docstoc
					                                          HoldUp
             Install thIs                                      For Your
           product on 2"                                        Safety
            or 1¼" hItch
                                                            warranty
         receIvers onlY.                                   Registration
   • Do not use with a hitch-                                on-line
     extender.
                                                             YAKImA.com
   • Do not use with a 1-1/4" hitch
     adapter.
   • Do not install on trailers,
     campers, or RVs.                                                                                       TooLS REQUIRED:
   • Do not install if spare tire
     causes interference with                                                                            AdJuSTABlE WrEncH
                                                          REAR
     bikes, or folded carrier.                            whEEL TRAY
      In addition, some undersized                        ASSEmbLY (1x)
      receivers may not accept this
       product. If you do not know
      the capabilities of your hitch
     receiver, consult an automotive
               professional.

                                                                                                                   KEY (2x)

                                                                FRonT whEEL TRAY
                                                                ASSEmbLY (1x)                                   LoCKInG CAbLE (1x)




                     boLT (4x)
            LoCK wAShER (4x)
                 wAShER (4x)
                                                                                                             2" bASE (1x)
                                             SAFETY CLIP (1x)                                            (2" Holdup only)

                         wREnCh (1x)

                                 hITCh boLT (1x)                                                          1 1/4" bASE (1x)
                         LoCK wAShER (1x)                                                               (1 1/4" HolduP only)



                Important warnIng
     It Is crItIcal that all yakIma racks and accessorIes be properly and securely attached to your vehIcle. Improper attachment could
     result In an automobIle accIdent, and could cause serIous bodIly Injury or death to you or to others. you are responsIble for
     securIng the racks and accessorIes to your car, checkIng the attachments prIor to use, and perIodIcally InspectIng the products
     for adjustment, wear, and damage. therefore, you must read and understand all of the InstructIons and cautIons supplIed wIth
     your yakIma product prIor to InstallatIon or use. If you do not understand all of the InstructIons and cautIons, or If you have no
     mechanIcal experIence and are not thoroughly famIlIar wIth the InstallatIon procedures, you should have the product Installed by a
     professIonal Installer such as a qualIfIed garage or auto body shop.


                                                                                                                    Part #1033533 Rev.B
1033533B-1/15
         Insert Base Into                                        Fasten hItch Bolt.
         hItch receIver.
                                                           • Insert hitch bolt and lock washer,             SECURE hitch bolt
                                                             from RIGhT To LEFT.                            with safety clip.
                                                           • Tighten with adjustable wrench.




  The holes in the base
  must align to the holes
   in the hitch receiver.

         rotate Base to                              attach FIrst traY to Base.
                                                                                                                    wheel strap
         up posItIon                                 Align holes in base to holes in tray.
 • Pull spring pin to release base.
 • Lift frame.
 • Release spring pin. Pin should
   snap into place.




                                                                                pivot arm                  LowER TRAY:
                                                                                                      ImPoRTAnT: wheel strap
                                                      • Insert bolt, washer, and lock-washer,          is to your right, and pivot
                                                        in order shown.                                    arm is to your left.
                                                      • Tighten with supplied wrench.

           attach second traY to Base.                                                                                    pivot arm
           Align holes in base to holes in tray.

  • Insert bolt, washer, and lock-
    washer, in order shown.
  • Tighten with supplied wrench.




                                                                                                       UPPER TRAY:
                                                                                                     ImPoRTAnT: wheel
                                                   wheel strap                                     strap is to your left, and
                                                                                                  pivot arm is to your right.

1033533B-2/15
          Fold holdup down.                                                 Fold pIvot arm down.


                                                                         be sure pivot arm
                                                                         is folded down.




                                    • Pull spring pin to
                                      release base.
                                    • Fold down holdup
                                    • Release Pin. Pin should
                                      snap into place.




          prepare For loadIng.                 load heavIest BIKe FIrst.

  Release wheelstrap
  by pressing the lever
  on the buckle.



                                                                                  Make sure your tires are
                                                                                   filled to recommended
                                                                                 pressure found on the tire.

    Tuck strap into
    slot at rear of                           note: Holdup can fold down past
    whelltray.                              horizontal to aid in loading your bikes.

                                         be sure to return the holdUp to the locked
                                             horizontal position after loading.


                swIng pIvot arm Into place.                                        secure the hooK.

 Rotate the pivot arm
 up until the hook                            CAUTIon:                       Compress the
 rests on the bike tire                       If any part of your bike       hook against
 1" from the brakes.                          comes in contact with          the wheel by
                                              the red trigger, do not        applying firm
                                              use this carrier with          pressure.
                                              that bike.




1033533B-3/15
          secure rear wheel strap.                                  tIghten rear wheel strap.

     Feed the strap through                                    • Insert the strap
     the spokes of wheel.                                        end through the
                                                                 top of the ratchet
                                                                 buckle.
                                                               • be sure the pad
                                                                 rests on the rim.




                                  Rotate the wheel                             Move the ratchet tab up and
                                slightly, if necessary.                        down to tighten the strap.

                                                      • PUSh hooKS AGAInST TIRES.
                       checK the                      • REAR whEELS SECURED bY RATChET STRAPS.
                     InstallatIon
                    BeFore drIvIng                    • bE SURE ALL hARDwARE IS SECURED ACCoRDInG To
                                                        InSTRUCTIonS.
                         awaY.
                                                      • ALwAYS SECURE PIVoT ARm whEn TRAY IS EmPTY.


                read all warnIngs on neXt page BeFore drIvIng awaY.


                secure pIvot arms when not In use.
                when not carrYIng BIKes alwaYs Fold holdup up.




                                                                                  Rotate pivot
                                                                                   arm down.


                       Fold wheeltray
                          inboard.                 Tilt wheeltray
                                                      inboard.


          Slide the hook
         against the rear
          wheel cradle.
                                                              Fold up holdUp.




1033533B-4/15
         locK up Your BIKes.                                                                     Included Bottle opener.
                                                  lock it at the
                                                 mast pivot point.

                                                                  oR
                                             • Remove hitch pin and lock to the hitch bolt.
                                             • Check engagement by pulling on lock.
  Pass the locking cable through             • IMPoRTAnT: Hitch pin must always be
    your bike frames and quick-                used when the bike lock, or hitch lock are
     release wheels. Pass lock                 not used!
   through loop at end of cable.
                   Also availiable (sold seperately):                                                    Enjoy a refreshing beverage.
                   hITChLoCK (yakima part number
                  8007235) for locking the hitchbolt to                                                  Your HoldUp endcap doubles
                    secure your Holdup from theft.                                                            as a bottle opener!


                  Important load lImIts:
                  hItch load Is lImIted to 60 lBs. per BIKe.

   • never drive off-road with bicycles loaded.
   • Do not install on trailers, campers, or RVs.
   • Do not position bicycle tires near vehicle’s hot exhaust.                                          Install thIs
   • Do not install if spare tire causes interference with                                             product on 2"
     bikes or folded carrier.                                                                         and 1 1/4" hItch
                                                                                                      receIvers onlY.
   BIKes:                                                                                     • Do not use with a hitch-extender.
   • make sure your tires are filled to recommended                                           • Do not use with a 1-1/4" hitch adapter.
     pressure found on the tire.                                                              • Do not install on trailers, campers, or RVs.
   • Do not carry tandem or recumbent bikes.                                                  • Do not install if spare tire causes
                                                                                                interference with bikes, or folded carrier.
   • Do not transport bicycles with attached baby seats,
     panniers, wheel covers, full bike covers or motors.                                       In addition, some undersized receivers
                  Remove this rack before entering an automatic car                               may not accept this product. If you
                            wash, and when not in use.                                           do not know the capabilities of your
                    mAInTEnAnCE: Periodically use non-water soluble                             hitch receiver, consult an automotive
                lubricant on moving metal parts. Use a soft cloth with water                                 professional.
                          and mild detergent to clean rubber parts.

                   Attachment hardware can loosen over time. Check before each use, and tighten if necessary.
                        Failure to obey load limits can result in property damage, personal injury, or death.

                              TecHnical assisTance or replacemenT parTs:
                                      Go online: www.yakima.com
                                       contact your dealer or call: (888) 925-4621
                                      monday through Friday 7:00 am to 5:00 pm psT

                                                                          This product is covered by YAKImA’s
                                                                  “Love It Till You Leave It” Limited Lifetime warranty
                                                            To obtain a copy of this warranty, go online to www.yakima.com
                                                                        or email us at yakwarranty@yakima.com
                                                                                   or call (888) 925-4621
                                      Keep            these             InstructIons!
1033533B-5/15

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:128
posted:3/29/2010
language:English
pages:5