Get documents about "SPECIAL SHAPES BRASS
Description
SPECIAL SHAPES BRASS
Shared by: lindahy
-
Stats
- views:
- 54
- posted:
- 3/27/2010
- language:
- Albanian
- pages:
- 2
Document Sample
Ian Millard
PO Box 2409
Port Macquarie NSW 2444
www.irmodels.com
** SPECIAL SHAPES BRASS **
Catalogue & Pricelist - November 2008
All brass structural shapes and wire are available in standard 12" lengths. Longer lengths on selected items are available on special request.
All items from the Special Shapes range, excluding tools, are available, but not necessarily stocked at all times. This catalogue lists only those items that are stocked on a
continual basis. Visit www.specialshapes.com for the full range. For special request items, note the Stock No. from the website and contact us for a quote.
Prices mentioned in this catalogue are subject to change without notice. Postage and packing is extra.
All dimensions shown below are in imperial measurements unless otherwise noted. Where indicated, W = wall thickness
ANGLES I-BEAMS C-CHANNELS
Item Item Item
No. A W Price No. A B W Price No. A B W Price
A-1 1/32 0.010 1.70 B-2-1 1/16 1/32 0.014 1.70 C-2-1 1/16 1/32 0.014 1.10
A-1X 3/64 0.012 1.70 B-3-1X 3/32 3/64 0.016 1.70 C-3-1X 3/32 3/64 0.016 1.20
A-2 1/16 0.014 1.80 B-4-2 1/8 1/16 0.020 1.90 C-4-2 1/8 1/16 0.020 1.50
A-2X 5/64 0.016 1.80 B-6-3 3/16 3/32 0.026 2.30 C-6-2 3/16 1/16 0.026 1.60
A-3 3/32 0.018 1.90 B-8-4 1/4 1/8 0.028 3.20 C-6-3 3/16 3/32 0.026 1.60
A-4 1/8 0.022 1.90 C-8-4 1/4 1/8 0.028 2.30
A-5 5/32 0.024 2.30
SQ. CHANNELS RECT. TUBING
H-COLUMNS
Item Item
Item No. A W Price No. A B W Price
No. A W Price SC-1 1/32 0.008 1.70 RT-43 3/32 3/16 0.014 3.50
H-1 1/32 0.008 1.90 SC-1X 3/64 0.011 1.70 RT-44 1/8 1/4 0.014 4.30
H-1X 3/64 0.011 1.90 SC-2 1/16 0.013 1.80
H-2 1/16 0.013 1.90 SC-2X 5/64 0.016 1.80
H-2X 5/64 0.016 1.90 SC-3 3/32 0.018 1.90 SQ. TUBING
H-3 3/32 0.018 2.00 SC-4 1/8 0.022 1.90
H-4 1/8 0.022 2.00 SC-5 5/32 0.024 2.30 Item
No. A W Price
ST-24 1/16 0.014 1.40
ROUND TUBING ROUND TUBING ST-34 3/32 0.014 1.50
(0.006" wall) (0.014" wall) ST-44 1/8 0.014 2.00
Item Item
No. A W Price No. A W Price
TT-61 1/32 0.006 1.70 TT-42 1/16 0.014 1.00 ROUND BAR
TT-61X 3/64 0.006 1.70 TT-43 3/32 0.014 1.00
TT-62 1/16 0.006 1.70 TT-44 1/8 0.014 1.30 Item
TT-62X 5/64 0.006 1.70 TT-45 5/32 0.014 1.60 No. A Price
TT-63 3/32 0.006 1.80 TT-46 3/16 0.014 1.80 R-10 0.010 0.50
TT-63X 7/64 0.006 1.80 TT-47 7/32 0.014 2.00 R-12 0.012 0.50
TT-64 1/8 0.006 1.80 TT-48 1/4 0.014 2.20 R-14 0.014 0.50
R-16 0.016 0.50
R-20 0.020 0.30
SQ. BAR TEES R-23 0.023 0.30
R-25 0.025 0.30
Item Item R-28 0.028 0.30
No. A Price No. A W Price R-32 0.032 0.30
S-1 1/32 0.90 T-1 1/32 0.010 1.90 R-40 0.040 0.30
S-1X 3/64 0.80 T-1X 3/64 0.012 1.90 (min. 10 piece order)
S-2 1/16 0.90 T-2 1/16 0.014 1.90
S-2X 5/64 0.90
S-3 3/32 0.90
S-3X 7/64 1.00
S-4 1/8 1.10
Page 1 of 2
Ian Millard
PO Box 2409
Port Macquarie NSW 2444
www.irmodels.com
** SPECIAL SHAPES BRASS **
Catalogue & Pricelist - November 2008
All brass structural shapes and wire are available in standard 12" lengths. Longer lengths on selected items are available on special request.
All items from the Special Shapes range, excluding tools, are available, but not necessarily stocked at all times. This catalogue lists only those items that are stocked on a
continual basis. Visit www.specialshapes.com for the full range. For special request items, note the Stock No. from the website and contact us for a quote.
Prices mentioned in this catalogue are subject to change without notice. Postage and packing is extra.
All dimensions shown below are in imperial measurements unless otherwise noted. Where indicated, W = wall thickness
FLAT BAR BRASS SHEET ETCHED BRASS MESH
(6" x 12") (7" x 1-7/16")
Item Item Item
No. A B Price No. Thickness Price No. Hole Size Price
F-1X-1 1/64 1/32 0.70 FS-01 0.001 1.70 SSM-60 1/32 square 10.00
F-1X-2 1/64 1/16 0.80 FS-02 0.002 2.00 SSM-77 3/64 square 10.00
F-1X-3 1/64 3/32 0.80 FS-03 0.003 2.60 SSM-05 1/64 diamond 10.00
F-1X-4 1/64 1/8 0.90 FS-10 0.010 7.80 SSM-11 3/64 diamond 10.00
F-1X-6 1/64 3/16 1.00
F-1X-8 1/64 1/4 1.20
F-1X-10 1/64 5/16 1.40
F-1X-12 1/64 3/8 1.80
F-1X-16 1/64 1/2 1.70
F-1-2 1/32 1/16 0.80
F-1-3 1/32 3/32 0.90
F-1-4 1/32 1/8 1.00
F-1-6 1/32 3/16 1.20
F-1-8 1/32 1/4 1.30
F-1-10 1/32 5/16 1.50
F-1-16 1/32 1/2 1.90
F-2-4 1/16 1/8 1.20
F-2-6 1/16 3/16 1.30
F-2-8 1/16 1/4 1.40
F-2-12 1/16 3/8 1.80
F-2-14 1/16 7/16 1.90
F-2-16 1/16 1/2 2.00
Page 2 of 2
