Pressure Sensitive Cold Mounting Film

Document Sample
Pressure Sensitive Cold Mounting Film Powered By Docstoc
					ULTRAKOTE OPTICALLY CLEAR ADHESIVE DXOC

                    Pressure Sensitive Cold Mounting Film
Application suitable        Optically Clear Mount Film, with a filmic carrier, coated on both sides with
for                         an solventadhesive and supplied with dual filmic liners - suitable for
                            exterior use
Laminate/Carrier            PETP OPTICALLY CLEAR


Thickness                   50 µm / 2.0 mil
Backing                     Twin Clear Filmic Liners
Adhesive Type               Solvent
UV Absorbers                Yes
Bond                        Permanent
Core Size                   Diameter 76 mm / 3"
Outdoor Application         Intermediate*
                            (*The result of the artificial weathering test and our experiences indicates
                            weather resistance of unprinted film for a period of approx. 1-2 year. In
                            some isolated cased the weather resistance can be reduced due to
                            enviromental factors and production irregularities)

Recommended                 Min. +5 0C - max. + 30 0C
Service Temperature

Application                 Best possible results on smooth, grease-free, dust-free, and clean base
Properties                  material. Any solvents residual e.g. on lacquered surfaces or on surfaces
                            cleaned with solvent can attack the vinyl. If applied on printed surfaces
                            than please pay special attention to most frugal use of solvents and the
                            intensive and total evaporation of residual solvents. Reduced adhesive
                            strength on non-polar materials, e.g. PE/PP and freshly printed inkjet
                            prints. Follow application instructions carefully!

Chemical resistance         To some organic solvents! (request table of resistance values)


Storage                     Upright in a cool and dry place - protect from direct UV-sunlight
                            Recommended temperature 15 - 20 0C at 55 - 60 % relative humidity

Maintenance

Temperature                 Resistance at all temperatures under normal Central European climatic
Resistance                  conditions (short term up to 80 0C)

Due to the vast number of possible influences when processing our products, our knowledge and experience shall not
release the user from doing his/her own checks and testing.




                                              Celkote Pty Ltd
                                         Unit 5 / 40 Carrington Rd
                                           Castle Hill NSW 2154
                                    Ph: 1300 139 930 Fx: 1300 139 940
                            ULTRAKOTE HIGH GLOSS DXGU2


               Pressure Sensitive Cold Lamination Film
Application suitable        Transparent high gloss pressure sensitive cold laminate, providing
for                         protection against abrasion and pollution

Laminate/Carrier            High Gloss Polyester


Thickness                   50 µm / 2.0 mil
Backing                     25 µm Clear Filmic Liner
Adhesive Type               Solvent
UV Absorbers                Yes
Bond                        Permanent
Core Size                   Diameter 76 mm / 3"
Outdoor Application         Intermediate*
                            (*The result of the artificial weathering test and our experiences
                            indicates weather resistance of unprinted film for a period of approx.
                            5 years. In some isolated cased the weather resistance can be
                            reduced due to enviromental factors and production irregularities)

Recommended                 Min. +5 0C - max. + 30 0C
Service Temperature
Application                 Best possible results on smooth, grease-free, dust-free, and clean
Properties                  base material. Any solvents residual e.g. on lacquered surfaces or
                            on surfaces cleaned with solvent can attack the vinyl. If applied on
                            printed surfaces than please pay special attention to most frugal use
                            of solvents and the intensive and total evaporation of residual
                            solvents. Reduced adhesive strength on non-polar materials, e.g.
                            PE/PP and freshly printed inkjet prints. Follow application
                            instructions carefully!
Chemical Resistance         To some organic solvents! (request table of resistance values)

Storage                     Upright in a cool and dry place - protect from direct UV-sunlight
                            Recommended temperature 15 - 20 0C at 55 - 60 % relative
                            humidity
Maintenance                 Clean regularly with gentle cleaning agents e.g. warm water with
                            commercial available mild detergents, methylated spirit......
                            Glossy vinyl are easier to clean than matt vinyls
Temperature                 Resistance at all temperatures under normal Central European
Resistance                  climatic conditions (short term up to 80 0C)

Due to the vast number of possible influences when processing our products, our knowledge and experience
shall not release the user from doing his/her own checks and testing.




                                          Celkote Pty Ltd
                                     Unit 5 / 40 Carrington Rd
                                       Castle Hill NSW 2154
                                Ph: 1300 139 930 Fx: 1300 139 940

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:11
posted:3/28/2010
language:English
pages:2
Description: Pressure Sensitive Cold Mounting Film