Docstoc

Condition Monitoring Equipment & Services

Document Sample
Condition Monitoring Equipment & Services Powered By Docstoc
					Condition Monitoring Equipment & Services
The 2009 Listing of Condition Monitoring Equipment and Services was compiled by Len Bradshaw, June 2009.The data given is as received
  from the respondents. The AMMJ does not therefore accept any liability for actions taken as a result of information given in this survey.
                                      (Copyright to the Asset Management and Maintenance Journal)




Applied Infrared Sensing                                                   •  Motor Circuit Analysis (MCA) off-line static impedance based
                                                                             testing, assesses the condition of AC/DC motors, providing
Address: Build. 22, 270 Ferntree                                             in-depth analysis of the motor circuits - turn-to-turn shorts, open
Gully Rd. Notting Hill VIC 3168.                                             turns/coils, reversed coils, coil-to-coil shorts, connection defects,
dmitri.i@applied-infrared.com.au                                             air gap defects, rotor defects - broken bars, eccentricity and
www.applied-infrared.com.au                                                  casting voids. Also, Electrical Signature Analysis (ESA) for
CM PRODUCTS                                                                  complete on-line dynamic Motor/Power Diagnostics.
NEC AVIO Thermal Imaging Cameras for Condition Monitoring,                 • Infrared Cameras: Predictive Maintenance; Research
Maintenance, Process Control and Research. NEC is one of the                  Development; Machine Vision; Surveillance.
most advanced manufacturers of thermal imaging cameras with full           Software
production chain in Japan (including infrared detector arrays used in      • Asset Performance Tools: cost/risk evaluation.
the cameras) and strict Japanese quality control.                          • Asset Efficiency Optimiz.: data management, display/analysis.
Product range includes hand-held and fixed cameras and camera              • Knowledge Based: efficient diagnostics of machinery problems
core modules. Detector arrays 640 x 480 pixels, 320 x 240 and 160 x          “rule based”; justification/explanation.
120 pixels. All cameras include advanced thermography functions.           • Decision Support: facilitate reliability efforts, root cause failure
The latest ThermoShot F30 is a new generation camera for                     analysis, cost calculation/tracking.
maintenance personnel. The concept is very similar to a photo              • Maintenance Management: resources, inspection/maintenance
camera which makes operator training extremely easy. In addition             routines; interface condition monitoring, finance, production.
to traditional thermal imaging display the operator can view
                                                                           CM SERVICES
temperatures right on visual image to avoid misinterpretation.
                                                                           The apt Group (of Companies) is an Independent Engineering
The camera is physically very small (shaped like a modern digital
                                                                           Consultancy – providing Condition Monitoring Services focusing on
photo camera) enough for carrying it in a pocket.
                                                                           Plant Reliability.
Other popular models include TH7800, TH7716, TVS-200EX and
                                                                           • Contractual/one-off plant surveys, project engineering, advise in
TVS-500EX all are advanced thermography systems typically used
                                                                              system/component selection/implementation.
by thermography specialists.
                                                                           • Highly qualified personnel, applying best practices, international
H6240 is the most advanced thermal imager based on the latest true
                                                                              standards and corrective recommendations.
high performance 640 x 480 pixels detector with better than 0.06
                                                                           Mechanical Discipline
deg.C sensitivity even without any averaging! Such sensitivity and
                                                                           • Machinery Diagnostics; Vibration Analysis; Modeling; Alignment;
optical resolution means hardly any fault will go undetected. These
                                                                              Balancing; NDT; Oil Analysis.
characteristics allow the operator to work at longer distances and
                                                                           Electrical Discipline (LV & HV)
analyze various types of equipment, large or very small.
                                                                           • Motor Management/Diagnostics, Thermal Imaging, Switchboard
The H6240 system comes with 1.3M pixels visual camera and image
                                                                              Inspections, Power Factor Correction/Condition Analysis.
fusion (blending of thermal and visual images) on the screen.
                                                                           • Substations, Transformers, Circuit Breakers, Busbars, DC
The camera will measure temperatures between -40 to 500 deg. C
                                                                              Systems, Power Cable Testing & Diagnostics.
and optional 2000 deg. C.
                                                                           Support Services
NEC AVIO has been supplying thermal imaging cameras in Australian
                                                                           • Plant Surveys, Database Establishment/Management, Data
market for 15 years and earned excellent reputation.
                                                                              Analysis, Training/Seminar Programs.
                                                                           • On-site and remote data analysis/management services are
Apt Group (of Companies)                                                      available “around the clock”.
                                                                           The apt Group of companies, promote Precision Engineering
Address: (HO) Level 1, Suite 5,                                            / Maintenance practices. Both in-house personnel and world-
13-15 Wentworth Ave, Sydney,                                               renowned advisors are available to undertake site audits, review in-
 NSW 2000. Australia                                                       house processes and assist with change as needed.
Email: info@aptgroup.com.au
Web Page: www.aptgroup.com.au
CM PRODUCTS                   Portable/On-line Products
                                                                           Aquip Systems
The apt Group (of Companies) sell products incorporating advanced          Address: 4/5 Brodie Hall Drive,
techniques and fast resolve/prediction to failure for Mechanical &         Bentley WA 6102 Australia
Electrical plant diagnostics.                                              Email: sales@aquip.com.au
Products suit large and small industrial plants, production critical and   Web Page: www.aquip.com.au
less critical machines, operator and service provider applications.        CM PRODUCTS
Equipment                                                                  PRÜFTECHNIK’s Condition Monitoring products available for both
• Agency agreements for Pruftechnik, EuroPulse, Guide, APIPro,             online and offline applications:
   All-testPro, APT, amongst others.                                       - VIBSCANNER – hand-held tool capable of collecting vibration
• Machine/Bearing Monitoring: predictive trending tools, Data              data, temperature, speed and process parameters. Add-on modules
  Loggers, FFT Analysers, Fixed Monitors & WEB based Surveillance          available for Full Spectrum, Time Waveform, Balancing & Laser
– Vibration, Eccentricity, Acoustics, Ultrasonic, Temperature.             Alignment.
• Alignment/Laser Measurement: Shafts; Pulleys; Machines.                  - VIBXPERT – a high performance, full-feature 1 or 2 channel FFT
• Dynamic Balancing: Rotors/Fans.                                          data collector and signal analyzer for the monitoring & diagnosis of
• Battery Maintenance: Extend Life/Rejuvenate.                             machine conditions.
• Electric Motor Monitoring: detect & measure the severity of AC           - VIBCODE – Vibration transducer with automatic measurement
   motor stator and rotor problems, DC motor field winding                 point identification for all systems. This guarantees consistently
   problems, power problems and cable issues.                              reproducible measurement results, regardless of who takes the
                                                                         Condition Monitoring Equipment & Services




readings.                                                                InterActive CM Training Courses
- VIBNODE, VIBROWEB XP, VIBROWEB – intelligent machine                   • NEW CM System installation & commissioning
monitoring systems that can perform measurements, evaluation,            • Reliability Awareness Seminar
archiving & alarm warning. Very-fast-multiplexer systems available       • Balancing & Alignment Skills Training
up to 32 channels with an internal webserver & email server, these       • PDM & CBM System Management & Audits
systems provide convenient remote access from any PC.                    • Activity Based Vibration Analysis Level 1 & 2
- OMNITREND is the common PC software for all data collectors
and online monitoring systems from PRÜFTECHNIK. Omnitrend
is used to program measurement tasks and to evaluate, archive
                                                                         FLIR Systems Australia
and document measurement results in conformance with ISO                 Address: 10 Business Park Drive
standards.                                                               Notting Hill Vic 3168 Australia
                                                                         Email: info@flir.com.au
CM SERVICES                                                              Web Page: www.flir.com.au
Aquip Systems provides expert ongoing condition monitoring
                                                                         CM PRODUCTS
services as well as adhoc machine diagnosis. We provide condition
                                                                         FLIR Systems, the global leader in infrared cameras, offer a
monitoring training with emphasis on practical applications
                                                                         wide range of infrared cameras for predictive and preventative
(introductory to advanced level). We also operate the sole
                                                                         maintenance. These include:
PRÜFTECHNIK certified service centre in Australia, and are fully
                                                                         • The low cost FLIR i series
equipped to carry out services, repairs and calibration checks on all
                                                                         • The revolutionary, low cost FLIR i5
PRÜFTECHNIK equipment.
                                                                         • The new, innovative FLIR T/B series, which offers an optimum
                                                                             mix of ergonomics, flexibility and features
eReliability                                                             • The brilliant new FLIR P660, which features a 640x480
Address: PO Box 3090,                                                    uncooled
Dural NSW 2158                                                               microbolometer array with measurement & also possesses GPS
info@ereliability.com.au                                                 • The affordable A series, for integration into machine vision and
www.ereliability.com.au                                                      automation systems
                                                                         • GasFindIR series for detection of leaking hydrocarbons and SF6
CM PRODUCTS                 Condition Monitoring Systems                 • A variety of software packages
eRELIABILITY offers the latest technology Vibration Analysis &           • Quality tested infrared windows
Alignment Software & Hardware Systems. Alliances with leading            Infrared training is offered on site or through the University of
PdM companies allows eRELIABILITY to offer fit for purpose               Melbourne. Level I and II thermography courses accredited to
solutions for your Company including installation, commissioning         AINDT standard are available.
and on-going training.                                                   After sales service from the FLIR Systems certified service centre,
Complete range of accelerometers & accessories including:                which is supported by factory trained and experienced service
• ‘AC’/mV/g vibration sensors                                            manager and other personnel.
• High and Low frequency vibration sensors
                                                                         CM SERVICES
• Compact vibration sensors
                                                                         FLIR Systems Australia Pty Ltd is a subsidiary of FLIR Systems
• Dual output vibration sensors
                                                                         Inc., the global leader in infrared cameras. We are totally focused on
• IECEx certified vibration sensors
                                                                         supply, service, training and application support for infrared camera
• Submersible vibration sensors • 4-20mA vibration sensors
                                                                         users. FLIR Systems is the world leader in the design, production
• Signal Conditioning Modules       • Junction and Switch boxes
                                                                         and marketing of thermal imaging camera systems for a wide variety
• Cable assemblies                   • Mounting accessories
                                                                         of thermography and imaging applications.
Computer Based InterActive Training Software
                                                                         We are proud of the efficient service we can provide our customers.
eRELIABILITY have a complete range of InterActive Computer
                                                                         We know and understand that turnaround times are critical and this
Based Training packages available covering Vibration Analysis,
                                                                         is why we have in-house service & calibration checks undertaken by
Alignment & precision maintenance procedures.
                                                                         our factory trained service manager.
eMonitor Remote Data Analysis
eMonitor offers a new innovative vibration analysis program with
online data analysis and remote data collection ability. No huge         Infratherm
capital expenditure required but providing asset protection at a very
                                                                         462 Terrace Road,
affordable price!
                                                                         Freemans Reach,
CM SERVICES                                                              NSW 2756 Australia
Vibration Analysis Surveys                                               info@infratherm.com.au
With 20 Years experience in Machinery Condition Monitoring,              www.infratherm.com.au
eRELIABILITY offer a full range of Vibration Analysis Services.
Infra-red Thermography Surveys                                           CM PRODUCTS
eRELIABILITY has 15 years IR experience on both mechanical and           Infratherm is a premium supplier of Thermal Imaging Cameras
electrical (including outside HV work) equipment.                        and attendant Report and Analysis Software for Preventative
Oil Tribology Services                                                   Maintenance and Condition Monitoring applications.
Combining Wear Debris Analysis with other particle separation and        With over 20 years experience in the market, Infratherm can provide
analysis tests the results are capable of determining the Root Cause     a range of services and applications support that has become the
abnormal wear commencement in drives, transmissions, hydraulics          bench mark in the industry.
and engines.                                                             Full maintenance and calibration services are provided along with
Laser Shaft Alignment Services                                           accredited training programs in infrared technology.
We specialise in precision laser alignments on all rotating machinery.   Infratherm offer equipment from the worlds leading manufacturers of
Our technicians use only the latest Pruftechnik Rotalign Pro laser       thermal imaging equipment and are not limited to a single supplier or
alignment equipment and quality stainless steel shims.                   brand name. Our focus is on customer needs and satisfaction and
On-Site Dynamic Balancing                                                we back this up with the best service in the industry.
eRELIABILITY has 20 years of on-site balancing experience and
utilises current technology 2-channel analysers to perform precision     CM SERVICES
on-site dynamic machine balancing on all types of machines.              Infratherm provide a range of Thermal Imaging Radiometric
             Condition Monitoring Equipment & Services



Cameras for Conditioning Monitoring and Preventative Maintenance           Shock Pulse Bearing, Lubrication, Vibration Spectrum Analyser.
Applications.                                                              Evaluated results RED, YELLOW & GREEN while at the
These cameras are available with Report and Analysis Software for         machine.
generating reports on the required servicing resulting from equipment      LineLazer™ shaft alignment accessories and live program.
inspections.Infratherm also provide accredited training courses in         Unique Purchase Plan “PAY ON USE” reduces capital outlay.
thermographic practices with emphasis on how to conduct Condition         On-Line Protection Protection & Monitoring of M/c Parameters
Monitoring inspections.As an independent supplier of thermal               Single & multichannel monitors + relays, Modbus & 4-20mA
inspection equipment and training, the focus is on customer needs         outpts.
and support.                                                               NEW Intellinova Continuous On-Line multi channel Analysing/
                                                                          Diagnostic Monitoring Systems. The sophisticated system is
                                                                          designed to monitor complex machines such as container cranes,
ISS Machine Health                                                        windgenerators, rolling mills, paper machines, cement plant machinery
Pin Gin Hill Lab.,                                                        and mining conveyor and crushing systems.
496 Palmerston Highway,                                                   CEMB SpA               Maintenance & Process Dynamic Balancing
Innisfail, QLD 4860                                                       Machines
admin@machinehealth.com                                                    True “Hard Bearing” force measuring Balancing Machines.
www.machinehealth.com                                                      Horizontal & Vertical for Maintenance & Production.
                                                                           Capacity Range 10Kg to 20,000Kg
CM PRODUCTS                                                               IRD Balancing LLC - Maintenance Dynamic Balancing Machines.
Self–Sealing Magnetic Chip Collectors.            Routinely collecting,    “Soft Bearing” Motion measuring machines.
quantifying and identifying ferrous wear debris from machine oil           Transportable balancing machines up to 200 tonne.
systems is one of the most cost effective condition monitoring tools       Portable Dynamic Balancing instruments.
available. It is also highly complementary to Vibration Analysis. The
self-sealing nature of these magnets means that no oil is lost during     CM Services
sampling (machines can be sampled “live”) and with a simple adapter        Instrument and machine repair and calibration to NML Standards.
they also provide an excellent oil sampling port.                          SPM Software installation and commissioning.
MCC Sample Cards. The ferrous wear debris collected on the                 Monitor Start-up commissioning.
self-sealing magnets is collected onto a special adhesive patch on         On–site machine trouble-shooting bearing & vibration problems.
custom made MCC debris sample cards. Using these cards ensures             Vibration/ Balancing/Alignment Training Courses in-House or
100% debris collection and provides for the analysis, microscopic         Public.  Precision Dynamic Balancing of rotors up to 3.0Kg
examination and storage of the wear debris samples.
Remote Network Vibration Monitoring System. ISS Machine
Health offers Customers the option of being set up with an on-site
                                                                          SigmaMSc
NVMS with the ability of remote dial-in from ISS Head Office.             Corporate Office – 7 Terrace
                                                                          Place, Murarrie Qld 4170
CM SERVICES
                                                                          info.msc@sigenergy.com
ISS Machine Health offers a fully integrated and cost effective CM
                                                                          www.sigmamsc.com
service :
                                                                          Victorian Branch – 27 Research Drive, Croydon Vic 3136
Vibration Analysis. Dual channel portable collector/analysers,
                                                                          NSW Branch – 1/5 Harris Street, Wallsend NSW 2287
multichannel vibration data acquisition. Comprehensive suite of
vibration analysis techniques available including TSA, Variable Speed     CM PRODUCTS
(order tracking), ODS, FEM etc.                                           MONITORING – VIBRATION PRODUCTS
Wear Debris Analysis. Oil, Grease, Magnetic Chip Collector,               CSI Portable Vibration Analysis
Ferrography (Analytical and DR) and Filter Debris Analysis.               • CSI 2130D, A1, A2, Z1, Z2 Analysers
Visual and NDT. DPI, MPI, and UT (by partner company).                    • Safety rated (Q) analysers
Additional. Laser Alignment, In-field Balancing, and Maintenance          CSI Online Vibration Analysis
Supervision.                                                              • 4500 online machinery analysis system
Failure Analysis. Macro/Micro FA and Report.                              • XP32 online portable machinery analysis system
Management. Plant/Machinery/CM Program Audit, and CM scope                • CSI 6500 Protection / Prediction System
of work for Tender.                                                       • CSI 9420 Wireless Transmitter System
Training. Full suite of CM Training courses (including CBA).              • CSI 9210 Online Transmitter
                                                                          CSI MHM Software
Machinery Vibration Specialists Australia                                 • MHM – Machinery Health Management software. Extremely
                                                                            powerful diagnostic and vibration analysis route based software.
Lv3, 7-9 Merriwa Street GORDON NSW 2072 Australia                         VMI Vibration Meter
mvsaust@ozemail.com.au      www.spminstrument.com                         • Handheld Viber A vibration meters and X-Viber route based
www.leonovabyspm.com       www.bearingchecker.com                           systems
MVS Aust P/L is a specialist company supplying products, support          METRIX Vibration Protection Equipment
services and technical training for the maintenance and repair of         • Vibration Protection Meters, Monitors, Switches, Transmitters,
rotating machinery.                                                          Proximity Probes, Drivers
                                                                          CTC Vibration Analysis Hardware
CM Products:                                                              • Wide range of accelerometers, sensors, transmitters, cables boxes
SPM Instrument AB: Originator of the “True Shock Pulse Method”            and other vibration hardware
BearingChecker Pocket Bearing Monitoring made Easy
 True Shock Pulse with evaluated bearing condition.                      MONITORING – OIL & INFRARED PRODUCTS
 Light weight, rugged, low cost, simple to use.                          CSI Oil Analysis
 Also measures IR temperature and used as a Stethoscope.                 • Complete range of industrial oil analysis hardware and software
Leonova™ Infinity 2-Channel Bearing/ Vibration Analyser with              UVLM Grease Analysis
Balancing, Laser Alignment, Bump Tests, Orbit & Lubrication               • UVLM grease monitoring meter
Analysis                                                                  Thermoteknix Infrared Thermographic Cameras
 Hand held 2 Channel Data Collector, Colour Touch Screen                 • 640 x 480 high resolution thermal/visual VISIR640 camera with
<600g                                                                       powerful Thermonitor reporting software
                                                                   Condition Monitoring Equipment & Services



Irisys Thermal Imager                                                   Metrics, Wilcoxon Research, etc, with customized cabling, data
• IRI 2010 (budget priced) 4010 (standard lens), 4030 & 4035            collection points, monitoring stations and on site installation, as
   (Dual Temp range) and 4040 (Telephoto) Thermal Imagers               required for a complete package.
Extech Temperature GUns                                                 PearlStreet also supplies custom designed monitoring systems for
• Extech low cost temperature guns                                      both short term and permanent monitoring of vibration and process
LASER ALIGNMENT AND BALANCING                                           parameters. These systems are catered to client requirements
CSI Laser Alignment & Balancing                                         together with on site installation, off site remote monitoring and
• 8130 Advanced & Basic Laser Alignment & balancing systems             analysis if required.
IGS Alignment Shims                                                     CM SERVICES
• Pre-cut Stainless Steel Shims                                         PearlStreet has provided condition monitoring services for over 30
MEASUREMENT & TESTING PRODUCTS                                          years, delivering integrated condition monitoring based on ISO 17359,
CSI & EFI Ultrasonics                                                   using the ‘right’ mix of technology, targeted at specific component
• Ultrasonic kits for determining airborne leaks & mechanical faults    failure modes and aimed at overall reliability improvement. With
Cygnus & Checkline Ultrasonic Thickness Gauges                          more than 20 offices around Australia, PearlStreet is able to provide
• Complete range of non-destructive thickness gauges for many           cost effective services nationally. Services provided include:
  Applications                                                          • Develop, implement and / or Audit Condition Monitoring
Compact Laser Tachometers                                                   Programs
• Wide range of laser tachometers for measuring machine speed           • Staff Leave Coverage and Technical Support to in house
Checkline Strobescopes and Temperature Guns                                 programs
• Check machine speed & inspect the temperature of most                 • Vibration Monitoring and Analysis
   equipment.                                                           • Infra-red Thermography of electrical, mechanical and process
MEASUREMENT & TESTING PRODUCTS                                              installations
Provision and ITI Scopes                                                • Oil and Wear Debris Analysis
• Low cost borescopes, Mid range scopes and fully functional V5         • Vibration Acceptance Testing and Commissioning
  PLUS videoscope system                                                • Laser Alignment and in-situ Balancing
                                                                        • Bearing Inspection and Failure Investigation
CM SERVICES                                                             • Strain Gauging and Finite Element Analysis
                                                                        • Data logging and process monitoring
CM ENGINEERING SERVICES
                                                                        • Fatigue Life Assessment
Advanced Vibration Services
                                                                        • Structural Integrity Inspection
Advanced problem analysis, root cause analysis, system design &
                                                                        • Classified Plant Inspection
commissioning, performance monitoring, system integration, alarm
                                                                        • Non Destructive Testing
setting, system audits, custom reporting, remote analysis
                                                                        • Materials Consulting
Remote Analysis Services
                                                                        • On site Training
Customer consultation, determine machine criticality, system design
and installation, on-site training, remote data analysis, quarterly
reviews
                                                                        SIRF Roundtables
CONSULTANCY SERVICES
Vibration Analysis Comprehensive Vibration Surveys for collection       Address: 276 City Rd,
of time waveform / spectral data.                                       Southbank VIC 3006
Oil Analysis, Oil chemistry, ferrous wear, contamination (incl. water   peter.todd@sirfrt.com.au
and Non Fe), lube condition, particle count to ISO, viscosity.          anna@sirfrt.com.au
Laser Alignment Shaft alignment, providing detailed report plus after   www.sirfrt.com.au
hours service as well.                                                  Shared learning networks
Precision Balancing Experienced / trained staff to precisely balance    for organisations seeking best business performance
your machines.
                                                                        CM SERVICES
Infrared Thermography Includes full colour single page fault reports
                                                                        SIRF Roundtables facilitates regional shared learning networks
with IR & Visual images
                                                                        across Australia and New Zealand. Membership groups include the
Motor Diagnostics Advanced non intrusive motor diagnostic
                                                                        Industrial Maintenance Roundtable (IMRt), Manufacturing Excellence
technology to detect rotor, stator and other motor faults.
                                                                        Roundtable (MERt), Knowledge Management Roundtable (KMRt),
Ultrasonic Leak Detection Detect air, gas, vacuum leaks, defective
                                                                        Supply Chain Roundtable (SCRt) and Sustainability Roundtable
valves or steam traps, electrical and mechanical problems.
                                                                        (SARt). Services related to condition monitoring include:
Vibration Diagnostics For route cause fault investigations requiring
the use of multi-channel FFT analysers, detecting transient events.     •   Facilitates the sharing of Condition Monitoring best practice
                                                                            between IMRt/ MERt members
CM TRAINING                                                             •   Coordinates the annual Condition Monitoring & Lubrication
• SigmaMSc provides a wide range of Condition Monitoring &                  Forum      eg. October 27 & 28 2009 in Sydney
  Vibration Training Courses at SigmaMSc’s Training Centre in           •   Training on Management and Operation of Condition Monitoring
  Melbourne and at various cities around Australia.                         and Inspection systems for non-specialists
• SigmaMSc also provide tailored, on-site training for specific         •   Training on Basic Condition Monitoring for non-specialists
  applications and technologies.                                        •   Carrying out Predictive Maintenance Strategy Reviews
                                                                        SIRF Roundtables annually runs a National Forum on Condition
PearlStreet                                                             Monitoring and Lubrication. It is an opportunity to listen to leading
                                                                        industry practitioners on techniques and proven strategies they use
Address: 43 Wittenberg Drive,
                                                                        in their operation. Attendees learn from these presentations and are
Canning Vale, WA 6155 Australia
                                                                        able to take back tips and ideas and adapt into their own environment.
stephen.teo@metlabs.com.au
                                                                        The forum provides not only a learning platform but also networking
www.pearlstreet.com.au
                                                                        opportunities amongst delegates with similar roles and challenges to
CM SERVICES                                                             learn from one another.
PearlStreet supplies a range of vibration transducers, e.g. Vibra-
             Condition Monitoring Equipment & Services



SKF Australia                                                                   2.   SKF Predictive maintenance (PdM)
                                                                                3.   SKF Proactive Reliability Maintenance (PRM)
17-21 Stamford Road,                                                            4.   Motor testing and diagnostics service
Oakleigh, Victoria 3166
                                                                          4. Work Execution.
R.S.Senthil.Vel@SKF.com
                                                                          SKF can assist by providing project management, supervision, and
www.skfcm.com
                                                                          inspection, mechanical installation skills where customers do not
Countries Supported by this parent company: + 130 countries               have either the tools or specialized knowledge in these tasks.
                                                                          a) Application knowledge: SKF has extensive application knowledge
CM PRODUCTS                                                               through branch offices around Australia, as well as the industrial
SKF is the leading supplier of condition monitoring and maintenance       specialists to draw on to solve customer problems with regards to
diagnostic systems, hardware and software that enables us to monitor      rotating equipments.
operations and identify problems both mechanical and electrical           b) Reliability Training: SKF engineers are on hand to provide
faults.                                                                   specialist knowledge and training for our customers. We have offices
1. Basic Condition Monitoring                                             both globally and locally, as one of largest global suppliers of condition
SKF Basic condition monitoring kits combine instruments to enable a       monitoring/reliability services.
“multi-parameter” approach to monitoring that includes vibration, oil
condition, temperature, speed, and more to help ensure the accurate
and reliable assessment of machine condition.                             Tui Industries P/L
2. Portable data-collectors/Analyzers for Condition Monitoring            Address: 5/14 Argon Street,
SKF offers a wide variety of portable data collectors/analyzers           Sumner Park, Brisbane 4074
including data collection, machinery vibration analysis and monitoring,   mail@tuiindustries.com.au
early detection of bearing defects or gear tooth wear, electric motor     www.tuiindustries.com.au
monitoring and field machinery balancing. Easy menu selection
                                                                          CM PRODUCTS
and control enable the user to quickly and efficiently perform a wide
                                                                          General Purpose Accelerometers
variety of operations.
                                                                          The two wire accelerometers can be connected directly to most data
3. Online Surveillance condition monitoring systems                       collectors or online systems that use the constant current method of
SKF’s On-line surveillance systems complement the use of periodic         transmission.
data collection instruments, facilitating a round-the-clock monitoring    4-20mA Accelerometers
of machinery that collects data 24 hours per day, 7 days per week         For industrial machine monitoring, especially in preventative
from permanently installed sensors.                                       maintenance. Features 4-20mA outputs for use with PLC’s and
4. On-Line Machinery Protection Systems                                   SCADA/DCS systems. No additional interface is needed.
SKF Condition Monitoring offers a spectrum of machinery protection        Special Purpose Accelerometers
and monitoring solutions backed by decades of experience and global       - EXI approved accelerometers Standard and 4-20mA
support that includes monitoring, protection, analysis and diagnosis      - Dual Accelerometer with temperature and vibration
of critical machinery.                                                    - High Temperature and radiation models
5. Baker Motor Testing and Diagnostic Systems:                            - Submersible accelerometers with 10bar maximum pressure and
SKF acquired Baker Instruments in June 2007. Baker Instruments              IP68 rating
Company is dedicated in developing and manufacturing motor                - Low profile and side entry options available
reliability tools that offer a broad spectrum of capabilities. Dynamic    Accelerometer Options Available
(on-line) monitoring combined with comprehensive static testing (off-     Side Entry with 1/4”-28UNF, 6mm or 8mm bolt through options
line), enhances motor condition awareness including efficiency and        Cable lengths
performance information                                                   Integral or connector cable
6. Measurement and Laser alignment Systems:                               Stainless steel braided cable or polyurethane
SKF is an exclusive distributor for Easy-Laser, precision laser           Various mounting
alignment system for industrial applications. SKF also offers a
                                                                          CM SERVICES
suite of other complimentary products such as Online and Offline
                                                                          Providers of innovative web based online condition monitoring
Thermography systems, Ultrasonic Inspection kits, low cost vibration
                                                                          services for rotating machinery. Our Core service called ozWatch
sensors etc.,
                                                                          is a centralised dynamic information system which provides real-
CM SERVICES                                                               time spectral analysis of machinery vibration with automated
SKF RELIABILITY SYSTEMS                                                   exception alerts issued to client and Tui engineers. Equipment
SKF offers Asset Efficiency optimization (AEO), a management              condition information is available anywhere anytime. We work in
process designed to achieve maximum efficiency and effectiveness          partnership with your reliability team, perform data analysis, provide
from work management activities focused on business goals,                recommendations for investigation and correction of faults. ozWatch
increasing profitability                                                  delivers early warning of condition degradation enabling controlled
1. SKF Energy and Sustainability Management (ESM) program                 intervention before failure. Knowledge of machinery condition
benefits to a customer by establishing an “opportunity map” of            prevents premature or unnecessary maintenance and reduces
potential savings and improved practices, including potential areas       downtime and maintenance costs. ozWatch is a cost effective and
for: 1. Reducing energy consumption                                       permanent whole-of-plant monitoring solution.
      2. Improving poorly operating energy-intensive systems
      3. Improving facility economic performance
      4. Improving facility environmental performance                     UE Systems Inc.
2. Maintenance Strategy.                                                  Address: 14 Hayes Street,
SKF can assist in developing and implementing maintenance                 Elmsford, NY 10523 USA
strategies using the following commonly applied techniques:               info@uesystems.com
      1. RCM: Reliability Centered Maintenance:                           www.uesystems.com
      2. SRCM®: Streamlined Reliability Centered Maintenance:
                                                                          CM PRODUCTS
      3. RBM: Risk Based Maintenance
                                                                          Portable hand held and on-line ultrasonic instruments for mechanical
3. Work identification.
                                                                          analysis, leak inspection and electric emission detection. The
For increasing plant reliability SKF recommends following processes/
                                                                          Ultraprobe 10,000 includes on-board data logging and on-board
programs to identify appropriate maintenance tasks:
                                                                          sound recording supported by data management and spectral analysis
      1. Operator Driven Reliability (ODR):
                                                                          software. Ultraprobe 201 Grease Caddy prevents over-lubrication of
                                                                              Condition Monitoring Equipment & Services



bearings. UE Systems has helped clients world-wide improve asset                Vitech Reliability
availability and reduce energy waste by locating early warning signals
                                                                                5A Modal Crescent,
of mechanical failure, locating compressed air and steam leaks and by
                                                                                Canning Vale, WA, 6155
identifying arcing tracking and (in high voltages) corona emissions in
                                                                                info@vitechreliability.com
electrical equipment.
                                                                                www.vitechreliability.com
                                                                                CM PRODUCTS
Vibration Institute of Australia
                                                                                Commtest:
P.O. Box 4413,
                                                                                Developers of the revolutionary Vb series portable and online vibration
Doncaster Heights
                                                                                analysers and monitoring systems:
VIC. 3109
                                                                                • Vb Series portable data collectors, analysers & balancing systems
clyde@viaustralia.com.au
                                                                                • Vb Online multi-channel plant surveillance systems.
www.viaustralia.com.au
                                                                                • Ascent analysis / data management software.
CM SERVICES                                                                     Fixturlaser:     Leaders in laser shaft alignment and specialist
The Vibration Institute of Australia offers vibration training courses that     measurement solutions.
follow the ISO 18436-2 standard. The training is understandable and             • XA – High-end shaft alignment system
enjoyable thanks to Clyde Volpe’s teaching skills and enthusiasm, and           • GO – Mid-range shaft alignment system
the Mobius Institute 3D animations and simulations – you have to see            • PAT - pulley alignment tool
them to believe them. We offer Category I, II and III public courses            • Dirigo - entry level alignment systems
around Australia and New Zealand, plus we can deliver the courses               • OL2R - dynamic movement measurement system
at your site.                                                                   Wilcoxon Research:            For over 40-years manufacturers of
We have successfully trained and certified hundreds of analysts from            accelerometers, vibration sensors, and accessories for industrial
Australia’s and New Zealand’s largest (and smallest) companies, and             condition based monitoring (CBM) applications.
we have trained a large proportion of the vibration consultants. You’ll         • Industrial accelerometers, cables and terminations solutions
be surprised what you’ll learn!                                                 • 4-20mA loop powered transducers
                                                                                • Signal Conditioners
                                                                                Mobius - iLearn Interactive: Innovative and interactive computer-
Vipac Engineers & Scientists Limited                                            based vibration and shaft alignment training products, vibration
279 Normanby Road                                                               analysis tools and vibration certification courses.
Port Melbourne VIC 3207                                                         • iLearn Vibration training programs and resources
melbourne@vipac.com.au                                                          • iLearn Alignment training programs and resources
www.vipac.com.au                                                                FLIR Systems:        The global leader in Infrared Cameras, offer a
                                                                                wide range of low cost, innovative and high end Infrared Cameras for
CM PRODUCTS                                                                     Predictive and Preventative Maintenance. These include the iSeries
VIPAC has been performing condition monitoring for over 30 years,               – Low cost / high performance hand held infrared cameras.
applying the latest reliability solutions to all segments of the power,         Beran Instruments: Manufacturers of online and portable
process, petrochemical, mining and mineral processing industries.               turbine diagnostic and monitoring solutions.
This experience has payed dividends for our clients in the accurate             • 767 - 32-ch portable multi-channel diagnostic and
assessment of machine condition and diagnosis of the root causes                    motoring system
of deterioration and failure. VIPAC’s reliability/machinery engineers           • 766 - 32-ch on-line multi-channel diagnostic and
have backgrounds in plant maintenance, mining and power generation                  motoring system
and are able to confer with specialists from other departments within           Endevco: World leaders in extreme vibration and pressure
Vipac on acoustic, aerospace and product development issues. The                sensing technologies.
company also holds NATA accreditation for a wide range of tests.                •    Industrial accelerometers for harsh and high
VIPAC’s services in machine vibration analysis encompass bearing                      temperature environments.
condition surveys, overall machine condition surveys, balancing and             •    Precision pressure transducers
advanced diagnosis of machine faults. Our services can be adjusted              •    Test & measurement accelerometers
to the client’s requirements, ranging from peripheral support to full           PDMA: Electric motor and generator testing systems / asset
out-sourcing. Maintenance techniques include Vibration Condition                management.
Monitoring, Infrared Thermographic Surveys, Pipe Thickness Surveys,             •    MCE – Offline motor testing systems
Lubricating Oil Analysis (Tribology), Process Parameters and Electric           •    Emax – Online motor testing systems
Motor Circuit Testing.                                                          •    MCEmax – Combined tester systems
CM SERVICES                                                                     Shinkawa
• Vibration Condition Monitoring                                                •    API approved turbine protection and diagnostic systems
• Thermographic Imaging                                                         •    WK Series loop powered proximity probe
• Laser Alignment                                                               Vibration monitoring systems
• Electric Motor Circuit Analysis                                               Artesis: Online motor condition monitoring systems
• Torsional Vibration •        Vibration Isolation                              • MCM Online motor monitoring systems
• Modal analysis and structural modification                                    • MCM Scada motor management and diagnostic software
• Ground vibration / blast vibration monitoring                                 Baseline Series:
• Fatigue life and failure assessment, strain measurements and                  Vibration tools and termination products.
  structural rehabilitation                                                     •    BLS-UVLA vibration listening amplifier for data collectors
• Automated diesel engine diagnosis                                                   or stand alone stethoscope use.
• Rotor dynamics analysis & analytical modelling                                •    BLS-TB series accelerometer termination boxes
• Single & multi plane field balancing of turbo machinery, boiler               •    Assorted accelerometer mounting hardware.
  feed pumps, fans, etc,
• Vibration shaker tests of components and systems to MIL, AS,
                                                                                CM SERVICES
  Lloyds and IEC Standards
                                                                                Vitech Asia Pacific provides the following service:
• Ride evaluations & human comfort assessment
                                                                                • Product, VA and Alignment Training (class room &
• Shock design and certification
                                                                                    customized on site)
• Design for vibration endurance
                                                                                • Installation & commissioning of systems

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:965
posted:3/27/2010
language:English
pages:6
Description: Condition Monitoring Equipment & Services