Docstoc

MeritorRockwell IHC EATON FULLER STEADY BEARING Slip Yokes

Document Sample
MeritorRockwell IHC EATON FULLER STEADY BEARING Slip Yokes Powered By Docstoc
					                            Index

                     PAGE                                 PAGE
Meritor/Rockwell
38,000 lbs                          46,000 lbs
SQHD                                DS440/DS460/DS480P
         YOKES          1                      YOKES        17
         SEALS          2                      SEALS        18

40,000 lbs                          DS461P
SQHP/SQ100/SQ100P                                 YOKES     19
         YOKES          3                         SEALS     20
         SEALS          4
                                    IHC
20-145                              40,0000 lbs
         YOKES          5           RA472
         SEALS          6                         YOKES     21
                                                  SEALS     22
46,000 lbs
SSHD                                N400
         YOKES          7                         YOKES     21
         SEALS          8                         SEALS     22

23-160                              46000 lbs
         YOKES          9           RA474
         SEALS         10                         YOKES     23
                                                  SEALS     24
EATON
38/40,000 lbs                       FULLER
DS380/DS400P                                      YOKES     25
         YOKES         11                         SEALS     26
         SEALS         12
                                    STEADY BEARING
DS381/DS401/DS402P                                YOKES     27
       YOKES           13
         SEALS         14           Slip Yokes
                                                  YOKES     28
DS404/DS404P
       YOKES           15
       SEALS           16
                     YOKE APPLICATIONS                                           1

                     ROCKWELL 38,000 LBS

                     SQHD

                                                       U-JOINT C/L to end
                     SERIES   YOKE                      ANGLE     of HUB    FLINGER
                     1610     16N-4-5131X
INPUT FRONT DIFF     1710     17N-4-3241,4741X,4291X     25/27     5.188"      47-3
2.00" - 10 SPLINE    1760     176N-4-71, 181X                                  47-3
2.938" HUB           1810     18N-4-1921, 2341X             30     5.375"      47-3


OUTPUT FRONT DIFF    1610     16N-4-1931, 3601X          25/31                 47-6
(thru shaft)         1610     16N-4-3861                    45     6.000"      47-6
1.750" - 10 SPLINE   1710     17N-4-2381                 25/31     4.875"      47-6
2.750" HUB           1710     17N-4-4091                    45     6.250"      47-6


REAR DIFF            1610     16N-4-1931, 3601X          25/31                 47-6
1.750" - 10 SPLINE   1610     16N-4-3861, 4451X             45     6.000"      47-6
2.750" HUB           1710     17N-4-2381                 25/31     4.875"      47-6
                     1710     17N-4-4091, 4831X             45     6.250"      47-6
                     SEAL & SLEEVE APPLICATIONS            2

                     ROCKWELL 38,000 LBS

                     SQHD


                     SLEEVE#           SEAL#

INPUT FRONT DIFF      99293    NAT# 416500/476500/35949N
2.000" - 10 spline             CR# 29288/29273
2.938" ground hub              ROCK# A1205L714


OUTPUT FRONT DIFF     99274    NAT# 475322N
(thru shaft)                   CR# 27295
1.750" - 10 spline             ROCK# A1805D212
2.750" ground hub

REAR DIFF             99274    NAT# 475009N
1.750" - 10 spline             CR# 27452
2.750" ground hub              ROCK# A1805B80
                     YOKE APPLICATIONS                                         3

                     ROCKWELL 40,000 LBS

                     SQHP / SQ100 / SQ100P

                                                     U-JOINT C/L to end
                     SERIES      YOKE                 ANGLE     of HUB    FLINGER

INPUT FRONT DIFF     1710        17N-4-6401, 6411X        28     5.156"      50-4
2.024" - 39 SPLINE   1710 1/2R   17N-4-7631-1X                   5.156"
3.000" HUB           1760        176N-4-531, 541X         29     5.188"      56-2
                     1760 1/2R   176N-4-541-1X            29     5.188"
                     1810        18N-4-3371, 3381X        30     5.188"
                     1810 1/2R   18N-4-3381-1X            30     5.188"
                     SPL170      170-4-681-1X                    5.090"

OUTPUT FRONT DIFF    1710        17N-4-6331            22/28     4.875"
(thru shaft)         1710        17N-4-6321, 5111X        45     5.969"
1.774" - 34 SPLINE
2.500" HUB


REAR DIFF            1710        17N-4-6401, 6421X        28     5.156"      50-7
SQAR / SQ100         1710        17N-4-6371, 6391X        43     6.250"      50-7
2.024" - 39 SPLINE   1710        17NYS32-99
3.000" HUB           1710 1/2R   17N-4-7641-1X                   5.156"
                     1710 1/2R   17N-4-6391-1X                   6.250"
                     SPL170      170-4-651-1X                    5.090"
                     SPL170      170-4-671-1X                    6.391"
                               SEAL & SLEEVE APPLICATIONS          4

                               ROCKWELL 40,000 LBS

                               SQHP / SQ100 / SQ100P

                                SLEEVE# SEAL#

                   pre
INPUT FRONT DIFF '83             99300   NAT# 417349
2.024" - 39 spline                       CR# 29867
3.000" ground hub                        ROCK# A1205E1227


                  after '83      99300   NAT# 100495 -No Sleeve
                                         CR# 30007
                  do not use sleeve ->   ROCK# A1205P2590


                   DIFF
OUTPUT FRONT pre '83             99250   NAT# 473274N
(thru shaft)                             CR# 24949
1.774" - 34 spline                       ROCK# A1205V1374
2.500" ground hub

                  after '83      99250   NAT# 4561V
                                         CR# 24964
                                         ROCK# A1205G2425


REAR DIFF          pre '83       99300   NAT# 3905
2.024" - 39 spline                       CR# 30145
3.000" ground hub                        ROCK# A1205U1685


                  after '83      99300   NAT# 100263 - No Sleeve
                                         CR# 30153
                  do not use sleeve ->   ROCK# A1205N2588
                              YOKE APPLICATIONS                                                   5

                              ROCKWELL 40,000 LBS (NEW WORLD)

                              RD / RP / RPL / RS / RR / RRL 20-145

                                                                        U-JOINT C/L to end
                              SERIES      YOKE                           ANGLE     of HUB    FLINGER
INPUT FRONT DIFF
2.024" -39 spline pre '93     1710        17N-4-6401, 6411X                  28     5.156"      50-4
3.000" HUB                    1710 1/2R   17N-4-7631-1X                             5.156"
                              1760        176N-4-531, 541X                   29     5.188"      56-2
                              1760 1/2R   176N-4-541-1X                      29     5.188"
                              1810        18N-4-3371, 3381X                  30     5.188"
                              1810 1/2R   18N-4-3381-1X                      30     5.188"


2.374" -46 spline after '93   1710        17N-4-7181X                               5.391"
3.250" HUB                    1710 1/2R   17N-4-7181-1X                             5.391"
                              1760        176N-4-1041X                              5.062"
                                          176NYS38-14A
                              1760 1/2R   176N-4-1041-1X, 176TYS38-27A              5.062"
                              1810        18NYS38-16A
                                          18N-4-3731X                               5.156"
                              1810 1/2R   18N-4-3731-1X                             5.156"
                              SPL90       90-4-341-1X                               4.641"
                              SPL170      170-4-721-1X                              5.100"
                              SPL250      250-4-351-1X                              5.312"


OUTPUT FRONT DIFF             1710        17N-4-6401, 6421X                  28     5.156"
(thru shaft)                              17NYS32-100A                       28     5.156"
2.024" - 39 SPLINE            1710        17N-4-6371,6391X                   45     6.250"
3.000" HUB                                17NYS32-99
                              1710 1/2R   17N-4-7641-1X                             5.156"
                              1710 1/2R   17N-4-6391-1X                             6.250"
                              SPL170      170-4-651-1X                              5.090"
                              SPL170      170-4-671-1X                              6.391"

REAR DIFF                     1710        17N-4-6401, 6421X                  28     5.156"
                                          17N-4-6411X (Wrong Flinger)        28     5.156"
2.024" - 39 SPLINE            1710        17N-4-6371,6391X                   45     6.250"
3.000" HUB                    1710 1/2R   17N-4-7641-1X                             5.156"
                              1710 1/2R   17N-4-6391-1X                             6.250"
                              SPL90       90-4-321-1X
                              SPL170      170-4-641-1
                              SPL170      170-4-651-1X                              5.090"
                              SPL170      170-4-671-1X                              6.391"
                               SEAL & SLEEVE APPLICATIONS                        6

                               ROCKWELL 40,000 LBS (NEW WORLD)

                               RD / RP / RPL / RS / RR / RRL 20-145

                               SLEEVE#          SEAL#
INPUT FRONT DIFF
2.024" - 39 spline pre '93       99300   NAT# 100495
3.000" ground hub                        CR# 30007
                                         ROCK# A1205P2590    do not use sleeve


2.374" - 46 spline after '93     99325   NAT# 100494
3.250" ground hub                        CR# 32410
                                         ROCK# A1205R2592    do not use sleeve


OUTPUT FRONT DIFF                99300   NAT# 100495
(thru shaft)                             CR# 30007
2.024" - 39 spline                       ROCK# A1205P2590    do not use sleeve
3.000" ground hub

REAR DIFF                        99300   NAT# 3905, 100263
2.024" - 39 spline                       CR# 30153
3.000" ground hub                        ROCK# A1205N2588,   do not use sleeve
                                         A1205Y1897
                               YOKE APPLICATIONS                                             7

                               ROCKWELL 46,000 LBS

                               SSHD

                                                               U-JOINT C/L to end
                               SERIES      YOKE                 ANGLE     of HUB     FLINGER
INPUT FRONT DIFF
2.250" -10 spline pre '74      1710        17N-4-1991, 4411X     24/28     6.062"         50-2
3.000" HUB                     1810        18N-4-1911, 2551X        30     5.844"         50-2


2.374" -46 spline after '75    1710        17N-4-5451, 5461X     22/23     5.688"         54-1
3.250" HUB                     1710 1/2R   17N-4-5461-1X         22/23     5.688"
                               1760        6.3-4-211X
                               1760 1/2R   6.3-4-211-1X
                               1810        18N-4-2701, 2711X        30     5.438"         54-1
                               1810 1/2R   18N-4-2711-1X            30     5.438"


OUTPUT FRONT DIFF
(thru shaft)
1.960" - 10 spline pre '75     1710        17N-4-3221, 4361X     21/35     5.250"remove flinger
2.750" ground hub              1710        17N-4-4131, 4481X        45     6.500"remove flinger


39 spline          after '75   1710        17N-4-5521, 6951X        33     5.250"remove flinger
2.024" - 39 spline             1710        17N-4-5501, 6871X        45     6.500"remove flinger
2.750" ground hub


REAR DIFF
1.960" - 10 spline pre '75     1710        17N-4-3221, 4361X     21/35     5.250"         47-2
2.750" ground hub              1710        17N-4-4131, 4481X        45     6.500"         47-2


39 spline          after '75   1710        17N-4-5521, 6951X        33     5.250"        47-13
2.024" - 39 spline             1710        17N-4-5501, 6871X        45     6.500"        47-13
2.750" ground hub
                               SEAL & SLEEVE APPLICATIONS                           8

                               ROCKWELL 46,000 LBS

                               SSHD

                               SLEEVE#           SEAL#
INPUT FRONT DIFF
2.250" - 10 spline pre '74      99300    NAT# 415086N
3.000" ground hub                        CR# 30055
                                         ROCK# A1205F162


2.374" - 46 spline '75 - '82    99324    NAT# 476470, 416470N
3.250" ground hub                        CR# 32410
                                         ROCK# A1205P1368


2.374" - 46 spline after '83    99325    NAT# 100494            do not use sleeve
3.250" ground hub                        CR# 32410
                                         ROCK# A1205R2592       do not use sleeve

OUTPUT FRONT DIFF
(thru shaft)
1.960" - 10 spline pre '83      99274    NAT# 475322N
2.750" ground hub                        CR# 27295
                                         ROCK# A1805D212


2.024" - 39 spline after '83    99274    NAT# 4874N
2.750" ground hub                        CR# 27558
                                         ROCK# A1205A1925

REAR DIFF
1.960" - 10 spline pre '74      99274    NAT# 475009N
2.750" ground hub                        CR# 27452
                                         ROCK# A1805B80


2.024" - 39 spline '75 - '82    99274    NAT# 3591
2.750" ground hub                        CR# 27642
                                         ROCK# A1-1805S149

2.024" - 39 spline after '83    99274    NAT# 4876N
2.750" ground hub                        CR# N/A
                                         ROCK# A1205P1914
                    YOKE APPLICATIONS                                                   9

                    ROCKWELL 46,000 LBS

                    RD / RP / RPL / RR / RRL 23-160

                                                              U-JOINT C/L to end
                    SERIES      YOKE                           ANGLE     of HUB    FLINGER
INPUT FRONT DIFF
2.374" -46 spline   1710        17N-4-7181X                               5.391"
3.250" HUB          1710        17NYS38-38A, 6-4-7771X            high    6.510"
                    1710 1/2R   17N-4-7181-1X                             5.391"
                    1710 1/2R   17N-4-7771-1X                             6.500"
                    1760        176N-4-1041X                              5.062"
                                176NYS38-14A
                    1760 1/2R   176N-4-1041-1X                            5.062"
                    1810        18NYS38-16A
                                18N-4-3731X                               5.156"
                    1810 1/2R   18N-4-3731-1X                             5.156"
                    SPL90       90-4-341-1X                               4.641"
                    SPL170      170-4-721-1X                              5.100"
                    SPL170      170-4-741-1X                              6.438"
                    SPL250      250-4-351-1X                              5.312"


OUTPUT FRONT DIFF   1710        17N-4-6401,6411X                   28     5.156"
(thru shaft)                    17N-4-6421X (Wrong Flinger)        28     5.156"
2.024" -39 spline   1710        17N-4-6371                         43     6.250"
3.000" HUB



REAR DIFF           1710        17NYS38-61A                   very low    4.880"
2.374" -46 spline   1710        17N-4-7181X                        low    5.391"
3.250" HUB          1710        17NYS38-38A, 6-4-7771X            high    6.510"
                    1710 1/2R   17N-4-7181-1X                             5.391"
                    1710 1/2R   17N-4-7771-1X                             6.500"
                    1760        176N-4-1041X                              5.062"
                                176NYS38-14A
                    1760 1/2R   176N-4-1041-1X                            5.062"
                    SPL90       90-4-341-1X                               4.641"
                    SPL170      170-4-721-1X                              5.100"
                    SPL170      170-4-741-1X                              6.438"
                    SPL250      250-4-351-1X                              5.312"
                     SEAL & SLEEVE APPLICATIONS                       10

                     ROCKWELL 46,000 LBS

                     RD / RP / RPL / RR / RRL 23-160

                     SLEEVE#          SEAL#

INPUT FRONT DIFF       99325   NAT# 100494        do not use sleeve
2.374" - 46 spline             CR# 32410
3.250" ground hub              ROCK# A1205R2592   do not use sleeve


OUTPUT FRONT DIFF      99300   NAT# 100495        do not use sleeve
(thru shaft)                   CR# 30007
2.024" - 39 spline             ROCK# A1205P2590   do not use sleeve
3.000" ground hub

REAR DIFF              99325   NAT# 100557        do not use sleeve
2.374" - 46 spline             CR# 33254
3.250" ground hub              ROCK# A1205Q2591   do not use sleeve
                     YOKE APPLICATIONS                                     11

                     EATON 40,000 LBS

                     DS380 / DS400 / DS400P

                                                  U-JOINT C/L to end
                     SERIES   YOKE                 ANGLE     of HUB    FLINGER

INPUT FRONT DIFF     1710     17N-4-4961, 5061X        25     5.188"      48-5
2.156" - 16 SPLINE   1760     176N-4-121, 231X         30     5.250"
2.938" HUB SIZE      1810     18N-4-2441, 2451X        30     5.250"      55-1


OUTPUT FRONT DIFF    1710     17N-4-3391, 4301X     25/33     5.250"
(thru shaft)         1710     17N-4-4141, 4861X        45     6.125"
1.750" - 10 SPLINE
2.625" HUB SIZE


REAR DIFF            1710     17N-4-5141, 5151X     25/33     5.250"      42-1
1.969" - 10 SPLINE   1710     17N-4-4151, 4851X        45     6.125"      42-1
2.625" HUB SIZE      1710     17N-4-4731,                      4.50"
                     SEAL & SLEEVE APPLICATIONS   12

                     EATON 40,000 LBS

                     DS380 / DS400 / DS400P

                     SLEEVE#           SEAL#

INPUT FRONT DIFF      99293    NAT# 475012N
2.156" - 16 spline             CR# 29292
2.938" ground hub              EATON# 119429



OUTPUT FRONT DIFF     99262    NAT# 475003N
(thru shaft)                   CR# 26239/26211
1.750" - 10 spline             EATON# 119431
2.625" ground hub


REAR DIFF             99262    NAT# 9773
1.969" - 10 spline             CR# 26373
2.625" ground hub              EATON# 119427
                     YOKE APPLICATIONS                                            13

                     EATON 40,000 LBS

                     DS381 / DS401 / DS402P

                                                         U-JOINT C/L to end
                     SERIES      YOKE                     ANGLE     of HUB    FLINGER

INPUT FRONT DIFF     1710        17N-4-6041X,8551X,           25     5.188"
                                 17N-4-8461                   25     5.188"
2.274" - 44 SPLINE   1710 1/2R   17N-4-6041-1X,8551-1X        25     5.188"
2.938" HUB SIZE      1760        176N-4-331X, 1481X           26     5.250"
                     1760 1/2R   176N-4-331-1X                26     5.250"
                     1810        18N-4-3281X                  30     5.250"
                     1810 1/2R   18N-4-3281-1X                30     5.250"


OUTPUT FRONT DIFF    1710        17N-4-6481, 8511X        25 / 33    5.438"
(thru shaft)         1710        17N-4-6451                    45    6.312"
1.790" - 34 SPLINE
2.625" HUB SIZE


REAR DIFF            1710        17N-4-5991, 6001X,           33     5.250"
2.024" - 39 SPLINE               8531X
2.625" HUB SIZE      1710        17N-4-6011, 6021X,           45     6.125"
                                 8541X
                     SEAL & SLEEVE APPLICATIONS             14

                     EATON 40,000 LBS

                     DS381 / DS401 / DS402P

                     SLEEVE#           SEAL#

INPUT FRONT DIFF      99293    NAT# 475012N/416654-narrow
2.274" - 44 spline             CR# 29292
2.938" ground hub              EATON# 119429
                               EATON# 127719


OUTPUT FRONT DIFF     99262    NAT# 475003N
(thru shaft)                   CR# 26239/26220
1.790" - 34spline              EATON# 119431
2.625" ground hub              EATON# 127720


REAR DIFF             99262    NAT# 9773
2.024" - 39 spline             CR# 26373
2.625" ground hub              EATON# 119427
                               EATON# 127721
                     YOKE APPLICATIONS                                                15

                     EATON 40,000 LBS

                     DS404P / RS404

                                                             U-JOINT C/L to end
                     SERIES      YOKE                         ANGLE     of HUB    FLINGER

INPUT FRONT DIFF     1710        17N-4-8451,127550                       5.188"
2.274" - 44 SPLINE   1710 1/2R   17N-4-8981-1X,127617                    5.188"
3.000" HUB           1760        176N-4-5221X,127618                     5.250"
                     1760 1/2R   176N-4-5221-1X,127622                   5.250"
                     1810        18N-4-4311, 4571X, 127619               5.250"
                     1810 1/2R   18N-4-4571-1X,127621                    5.250"
                     SPL170      170-4-201-1X                            5.270"
                     SPL250      250-4-81-1X                             5.490"

OUTPUT FRONT DIFF    1710        17N-4-8441,9041X,                33     5.250"
(thru shaft)                     127558
2.024" - 39 SPLINE   1710        17N-4-9001X,127624               45     6.125"
2.625" HUB           1710 1/2R   17N-4-9041-1X                           5.250"
                     1710 1/2R   17N-4-9001-1X                           6.125"
                     SPL170      170-4-221-1X                            5.266"
                     SPL170      170-4-241-1X                            6.500"

REAR DIFF            1710        6-4-8421, 127413                 33     5.250"
2.024" - 39 SPLINE   1710        17N-4-9031X,127415               33     5.250"
3.000" HUB           1710        17N-4-8991X,127614               45     6.125"
                     1710 1/2R   17N-4-9031-1X                           5.250"
                     1710 1/2R   17N-4-8991-1X                           6.125"
                     SPL170      170-4-261-1X                            5.156"
                     SPL170      170-4-281-1X                            6.240"
                     SEAL & SLEEVE APPLICATIONS                          16

                     EATON 40,000 LBS

                     DS404P / RS404

                      SLEEVE#              SEAL#

INPUT FRONT DIFF        99300     EATON# 127591
2.274" - 44 spline   note: check flinger clearance before using sleeve
3.000" ground hub

OUTPUT FRONT DIFF       99262     EATON# 127592
(thru shaft)         note: check flinger clearance before using sleeve
2.024" - 39 spline
2.625" ground hub

REAR DIFF               99300     EATON# 127591
2.024" - 39 spline   note: check flinger clearance before using sleeve
3.000" ground hub
                     YOKE APPLICATIONS                                        17

                     EATON 46,000 LBS

                     DS440P / DS460P / DS480P

                                                     U-JOINT C/L to end
                     SERIES      YOKE                 ANGLE     of HUB    FLINGER
INPUT FRONT DIFF
2.422" - 18 SPLINE   1710        17N-4-4581, 4751X               5.812"
3.375" HUB           1710 1/2R   17N-4-4751-1X                   5.812"
                     1760        176N-4-131, 241X                6.000"
                     1810        18N-4-1991, 2361X               5.812"      55-2
                     1810 1/2R   18N-4-2361-1X                   5.812"

OUTPUT FRONT DIFF    1710        17N-4-4171X                     5.500"
(thru shaft)         1710        17N-4-4591,5481X      33/40     6.625"
2.149" - 16 SPLINE   1710 1/2R   17N-4-4171-1X                   5.500"
2.938" HUB           1760        176N-4-251X                     5.812"


REAR DIFF            1710        17N-4-4171X                     5.500"
2.149" - 16 SPLINE   1710        17N-4-4591,5481X      33/40     6.625"
2.938" HUB           1710 1/2R   17N-4-4171-1X                   5.500"
                     1760        176N-4-251X                     5.812"
                     1810        18N-4-2401X                     5.812"
                     SEAL & SLEEVE APPLICATIONS   18

                     EATON 46,000 LBS

                     DS440P / DS460P / DS480P

                     SLEEVE#          SEAL#

INPUT FRONT DIFF      99337    NAT# 415894
2.422" - 18 spline             CR# 33699
3.375" ground hub              EATON# 119430


OUTPUT FRONT DIFF     99293    NAT# 475012N
(thru shaft)                   CR# 29292
2.149" 16 spline               EATON# 119429
2.938" ground hub


REAR DIFF             99293    NAT# 712937
2.149" 16 spline               CR# 29471
2.938" ground hub              EATON# 119432
                     YOKE APPLICATIONS                                           19

                     EATON 46,000 LBS

                     DS461P / RS461

                                                        U-JOINT C/L to end
                     SERIES      YOKE                    ANGLE     of HUB    FLINGER
INPUT FRONT DIFF
2.390" - 46 SPLINE   1710        17N-4-7531X                        6.000"
3.375" HUB           1710 1/2R   17N-4-7531-1X                      6.000"
                     1760        176N-4-1161X, 126583               6.203"
                     1760 1/2R   176N-4-1161-1X                     6.000"
                     1810        18N-4-3921X                        6.000"
                     1810 1/2R   18N-4-3921-1X                      6.000"


OUTPUT FRONT DIFF    1710        17N-4-7541, 7651X           38     6.625"
(thru shaft)
2.143" - 41 SPLINE
2.938" HUB


REAR DIFF            1710        17N-4-7551, 7561X           42     6.125"
2.143" - 41 SPLINE   1710 1/2R   17N-4-7561-1X                      6.125"
2.938" HUB
                     SEAL & SLEEVE APPLICATIONS      20

                     EATON 46,000 LBS

                     DS461P / RS461

                     SLEEVE#          SEAL#

INPUT FRONT DIFF      99337    NAT# 415894/415164N
2.390" - 46 spline             CR# 33699
3.375" ground hub              EATON# 119430
                               EATON# 210736


OUTPUT FRONT DIFF     99293    NAT# 475012N
(thru shaft)                   CR# 29292
2.143" - 41 spline             EATON# 119429
2.938" ground hub              EATON# 210737


REAR DIFF             99293    NAT# N/A
2.143" - 41 spline             CR# N/A
2.938" ground hub              EATON# 210724
                      YOKE APPLICATIONS                                             21

                      IHC 40,000 LBS

                      RA472
                                                           U-JOINT C/L to end
                      SERIES      YOKE                      ANGLE     of HUB    FLINGER
INPUT FRONT DIFF
2.364" - 36 spline    1710        17N-4-5711,7191X,7211X               5.438"      54-1
3.00" HUB             1710 1/2R   17N-4-8701-1X, 8721-1X               5.438"
                      1760        6.3-4-851X                           5.438"
                      1760 1/2R   6.3N-4-1561-1X                       5.438"
                      1810        18N-4-3161, 3651X                    5.438"      54-1
                      1810 1/2R   18N-4-4421-1X, 4441-1X               5.438"

OUTPUT FRONT DIFF     1610        16N-4-5731                           6.000"
(thru shaft)          1610        16N-4-5751                           5.375"
1.989" - 30 splines   1710        17N-4-5781                    45     6.110"
3.00" HUB

REAR DIFF             1610        16N-4-5751                           5.375"
2.114" - 32 splines   1610        16N-4-5731                           6.000"
3.00" HUB             1610 1/2R   16N-4-8611-1X                        5.375"
                      1610 1/2R   16N-4-8691-1X                        6.000"
                      1710        17N-4-5811,7221X              24     4.562"      54-1
                      1710        17N-4-5821                    26     5.000"
                      1710        17N-4-5791                    45     6.250"

                      N400
                                                           U-JOINT C/L to end
                      SERIES      YOKE                      ANGLE     of HUB    FLINGER
INPUT FRONT DIFF
2.364" - 36 splines   1710        6-4-5711, 7191X, 7211X               5.438"
3.00" HUB             1710 1/2R   6-4-8701-1X, 8721-1X                 5.438"
                      1760        6.3-4-851X                           5.438"
                      1760 1/2R   6.3-4-1561-1X                        5.438"
                      1810        6.5-4-3161, 3651X                    5.438"
                      1810 1/2R   6.5-4-4421-1X, 4441-1X               5.438"
                      1810 1/2R   6.5-4-4461-1X                        5.438"

OUTPUT FRONT DIFF     1610 1/2R   5-4-8911-1
(thru shaft)          1710 1/2R   6-4-9021-1
1.790" - 34 splines
2.503" HUB

REAR DIFF             1610        5-4-5751, 7221X                      5.375"
2.114" - 32 splines   1610        5-4-5731, 7181X                      6.000"
3.00" HUB             1610 1/2R   5-4-8611-1X                          5.375"
                      1610 1/2R   5-4-8691-1X                          6.000"
                      1710        6-4-5811, 7221X                      4.562"
                      1710 1/2R   6-4-8681-1X                          4.562"
                      1760 1/2R   6.3-4-1521-1X                        5.000"
                       SEAL & SLEEVE APPLICATIONS                                22

                       IHC 40,000 LBS

                       RA472

                        SLEEVE#         SEAL#
INPUT FRONT DIFF         99300  NAT# 417349
2.364" - 36 spline              CR# 30007
3.00" ground hub                IHC# 1651 279C91


OUTPUT FRONT DIFF         99300    NAT# 415013N
(thru shaft)                       CR# 29967
1.989" - 30 spline                 IHC#1651 280C91
3.00" ground hub


REAR DIFF                 99300    NAT# 710008
2.114" - 32 spline                 CR# 30140
3.00" ground hub                   IHC# 1651 281C91

                       N400
                       SLEEVE#     SEAL#

INPUT FRONT DIFF          99300    NAT# 415013N
2.364" - 36 spline                 CR# 29967
3.00" ground hub       pre '91     IHC# 1651 280C91
                       after '91   IHC# 1691 145C2, 401HH104, 415013N

OUTPUT FRONT DIFF         99250    NAT# 4624V
(thru shaft)                       CR# 25005
1.790" - 34 spline                 IHC#1691 144C2, 401HH101, 401HH103, 4624V
2.503" gound hub


REAR DIFF                 99300    NAT# 710008
2.114" - 32 spline                 CR# 30140
3.00" ground hub       pre '91     IHC# 1651 281C91
                       after '91   IHC# 1691 143C1, 401HH102, 401HH105, 710008

DANA# GGAHH103=712000 (TRANSMISSION SEAL)
DANA# GGAHH109=455088V
                      YOKE APPLICATIONS                                             23

                      IHC 46,000 LBS

                      RA474

                                                           U-JOINT C/L to end
                      SERIES      YOKE                      ANGLE     of HUB    FLINGER
INPUT FRONT DIFF
2.364" - 36 spline    1710        17N-4-5711,7191X,7211X               5.438"      54-1
3.00" HUB             1710 1/2R   17N-4-8701-1X, 8721-1X               5.438"
                      1760        6.3-4-851X                           5.438"
                      1760 1/2R   6.3N-4-1561-1X                       5.438"      54-1
                      1810        18N-4-3161, 3651X                    5.438"
                      1810 1/2R   18N-4-4421-1X, 4441-1X               5.438"

OUTPUT FRONT DIFF     1710        17N-4-5781, 7231X             45     6.094"
(thru shaft)          1610        16N-4-5721,7251X                     6.000"
1.989" - 30 splines
3.00" HUB

REAR DIFF             1710        17N-4-5711,7191X,7211X               5.438"      54-1
2.364" - 36 spline    1710 1/2R   17N-4-8701-1X, 8721-1X               5.438"
3.00" HUB             1760        6.3-4-851X                           5.438"
                      1760 1/2R   6.3N-4-1561-1X                       5.438"      54-1
                      1810        18N-4-3161, 3651X                    5.438"
                      1810 1/2R   18N-4-4421-1X, 4441-1X               5.438"
                     SEAL & SLEEVE APPLICATIONS      24

                     IHC 46,000 LBS

                     RA474

                     SLEEVE#           SEAL#

INPUT FRONT DIFF      99300    NAT# 417349/415281N
2.364 - 36 spline              CR# 30007
3.00" ground hub               IHC# 1651 279C91


OUTPUT FRONT DIFF     99300    NAT# 415013N
(thru shaft)                   CR# 29967
1.989" - 30 spline             IHC# 1651 280C91
3.00" ground hub


REAR DIFF             99300    NAT# 710008
2.364 - 36 spline              CR# 30140, 30148
3.00" ground hub               IHC# 1651 281C91
                          YOKE APPLICATIONS                                                25

                       FULLER
169**/189**/209**/229**
                                                                  U-JOINT C/L to end
                          SERIES      YOKE                        ANGLE      of HUB

OUTPUT SEAL               1710                                                5.625"
2.750" -54 spline         1710 1/2R   17N-4-9231-1X                           5.625"
3.750" HUB                1760        176N-4-1681                             5.625"
                          1760 1/2R   176N-4-1681-1X                          5.625"
                          1810        18N-4-4631                              5.625"
                          1810 1/2R   18N-4-4631-1X                           5.625"
                          SPL170      170-4-561-1X                            5.594"

125**/146**/147**/156**/157**/167**/187**
                                                                  U-JOINT C/L to end
                          SERIES      YOKE                         ANGLE     of HUB    FLINGER

OUTPUT SEAL               1710        17N-4-6931X                             5.750"
2.750" -10 spline         1710 1/2R 17N-4-6931-1X                             5.750"
3.750" HUB                1760        176N-4-791X                             5.969"
                          1760 1/2R 176N-4-791-1X                             5.969"
                          1810        18N-4-3561X                             6.062"
                          1810 1/2R 18N-4-3561-1X                             6.062"
                          1810 Flange 18N-4-2361X                             4.062"
                          SPL170      170-4-521-1X                            5.850"
                          SPL250      250-4-241-1X                            6.297"

6** / 66** / 76** / 9** / 95** / 116**
OUTPUT SEAL               1710        17N-4-6921X                             5.625"
2.500" -10 spline         1710 1/2R 17N-4-6921-1X                             5.625"
3.750" HUB                1760        176N-4-781X                             6.000"
                          1760 1/2R 176N-4-781-1X                             6.000"
                          1810        18N-4-3551X                             5.875"
                          1810 1/2R 18N-4-3551-1X                             5.875"
                          1810 Flange 18N-4-2351X                             3.625"
                          SPL170      170-4-481-1X                            5.750"
                          SPL250      250-4-201-1X                            6.062"
                          SPL250      250-4-191-1                             6.062"
610 / 6610
OUTPUT SEAL               1610        16N-4-4961                              5.750"
2.250" -10 spline         1610 1/2R   16N-4-4961-1, 5-4-8391-1X               5.750"
3.500" HUB                1710        17N-4-6861                              5.250"
                          1710 1/2R   17N-4-6861-1                            5.250"
                                      17N-4-6901-1X                           5.250"
                                      17N-4-7381-1X                           5.250"
                          1760        176N-4-701                              5.625"
                          1760 1/2R   176N-4-701-1                            5.625"
                                      176N-4-1101-1X                          5.625"
                          1810        6.5-4-2021
                      SEAL & SLEEVE APPLICATIONS                                        26

                      FULLER

169**/189**/209**/229**
                          SLEEVE#            SEAL#
OUTPUT SEAL
2.750" - 54 spline         99372    NAT# 415983N, 713750, CR# 37330   MANUAL SPEEDO
3.750" ground hub                   FULLER # K2262                    MANUAL SPEEDO

                                    FULLER # K2918                    MAGNETIC SPEEDO

125**/146**/147**/156**/157**/167**/187**
6** / 66** / 76** / 9** / 95** / 116**
                          SLEEVE#            SEAL#
OUTPUT SEAL
2.750" - 10 spline         99350    NAT# 415991, 712750
2.500" - 10 spline                  CR# 34891, 34883
2.250" -10 spline
3.500" ground hub


                          SLEEVE#            SEAL#
OUTPUT SEAL
2.750" - 10 spline         99372    NAT# 415983N, 713750
2.500" - 10 spline                  CR# 37330
2.250" -10 spline                   FULLER# K2262
3.750" ground hub
STEADY BEARING YOKE & STUB CHART                                             27

1710 SERIES
                                                       STDY BRG          WELD
BEARING       STUB        BUTT SIZE        # SPLINES   YOKE              YOKE
                         (inside tube)
210121-1X     17N-53-201     3.75"            10       17N-4-1981     17N-28-347
                                                       17N-4-1981-1
210661-1X     17N-53-411      3.75"           38       17N-4-7141
                                                       17NYS32-44
                                                       17N-4-7141-1

210661-1X     17N-53-421      4.25"           38       17N-4-7141
                                                       17NYS32-44
                                                       17N-4-7141-1

210661-1X     17N-53-311      3.75"           16       17N-4-4601
                                                       17N-4-4601-1
210661-1X     17N-53-21       3.75"           46       17N-4-7481-1


1760 SERIES

BEARING       STUB        BUTT SIZE        # SPLINES   YOKE
                         (inside tube)
210661-1X     17N-53-311     3.75"            16       176N-4-161     176N-28-17
                                                       176N-4-161-1

210661-1X     17N-53-21       3.75"           46       176N-4-821
                                                       176N-4-821-1


1810 SERIES

BEARING       STUB          BUTT SIZE      # SPLINES   YOKE
                           (inside tube)
210661-1X     18N-53-91        4.25"          16       18N-4-1891     18N-28-117
                                                       18N-4-2531X
                                                       18N-4-1891-1
210661-1X     18N-53-171       4.25           46       18N-4-3591
                                                       18N-4-3591-1
Slip Yokes                                      28

1610 SERIES   5-3-2261X   10.812"   16 Spline

1710 SERIES   6-3-2651KX 11.5"      16 Spline
              6-3-2671KX 10.5"      16 Spline

1760 SERIES   6.3-3-21KX 11.156"    16 Spline
              6.3-3-41KX 9.250"     16 Spline

1810 SERIES   6.5-3-1371KX11.875"   16 Spline
              6.5-3-1351KX10.25"    16 Spline

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:485
posted:3/27/2010
language:English
pages:29