Docstoc

866 EEx certified switches Safety switches Pull-wire emergency

Document Sample
866 EEx certified switches Safety switches Pull-wire emergency Powered By Docstoc
					14.         EEx certified switches
14.1        Safety switches
14.1.5      Pull-wire emergency stop switches
14.1.5.2    EEx ZS 73 range




Features    • Metal enclosure                     Cable length   • On the EEx pull-wire emergency stop
            • 2 contacts                                           switches, the cables are 3 m long
            • 4 spring force variants                            • Other lengths on enquiry
              (actuating forces)
            • Adjustable actuating force
            • Wire up to 50 m long                Note           For tensioned span lengths over 5 m,
            • Reset by push button                               intermediate wire supports are required,
              or key possible                                    see accessories in chapter 6.1.3.
            • Available with external
              watertight collar
            • EEx version certified by PTB
            • Pull-wire and wire-breakage
              functions




Key reset
                  33,4                       35                                  Watertight
                                                                                 collar
            30




Approvals   H
            D

            EEx Certificate of Conformity:
            PTB 03 ATEX 1070 X




866                                                                                                         Schmersal
14.             EEx certified switches
14.1            Safety switches
14.1.5          Pull-wire emergency stop switches
14.1.5.2        EEx ZS 73 range



Actuating       The values quoted relate to the switch being                                                  5,00 m
deflection/     mounted in an ambient temperature of 20 °C.                                       =                         =
force           Stretching of the wire due to elongation
                                                                                                                   F




                                                                                                        S
                and deformation of the wire thimbles has
                not been taken into account.
                The actuating forces given are only guide
                values, since the spring forces are subject
                to tolerances.
                Actuating deflections and forces relate to
                a 5 m long wire.


                Pre-                     Actuating                Actuating                     Recommended                Ordering
                tensioning               deflection S             force F [N]                   cable length               suffix
                force [N]                [cm]                                                   [m]


                295-390                  13                       38-60                         30-50                      -295N
                195-275                  13                       33-41                         20-30                      -195N
                120-180                  13                       19-25                         10-20                      -120N
                 60-100                  13                        5-8                          <10                        -60N


Temperature     Recommended lengths of wire for pull-wire                          -10 0 10 20 30 40 50 60 70 80 T[°C]
range           emergency stop switches in relation to the
                range of ambient temperature.
                                                                                   10
                                                                                   20
                                                                                   30
                                                                                  40
                                                                                   50
                                                                                l [m]



Contacts/                                                                       1 NO
Switch travel                                                                   1 NC
                                                                                BK 23                 24 BK
                                                                                BN 11                 12 BU


                                                                                 10         6     0 6         10
                                                                                                                   23-24
                                                                                                                   11-12
                                                                                      6,5       4 4 6,5
                Push button reset                                               EEx ZS 73 1Ö/1S VD
                Key reset                                                       EEx ZS 73 1Ö/1S VS

                Push button reset, watertight collar                            EEx ZS 73 1Ö/1S WVD
                Key reset, watertight collar                                    EEx ZS 73 1Ö/1S WVS


Ordering        EEx ZS 73 range pull-wire emergency stop switch
details         for one-side operation with one NO and one
                NC contact, key reset and watertight collar:
                EEx ZS 73 1Ö/1S WVS




Schmersal                                                                                                                             867
6.           Command devices
6.1          Pull-wire emergency stop switches
6.1.3        Accessories


             One-side operation




                                           3            5       6           1   2   3   4

Legend       1     Wire rope with red PVC sheath Ø 5 mm
                   (steel core: Ø 3 mm)
             2     Duplex clamp
             3     Wire thimble
             4     Eyebolt
             5     Wire clamp
             6     Wire support, eyebolt



             Two-side operation

                                                                    3   1


                            4         5                 8   7                           2
Legend   1       Wire rope with red PVC sheath Ø 5 mm
                 (steel core: Ø 3 mm)
         2       Eyebolt
         3       Hexagon nut
         4       Tension spring of stainless steel
         5       Wire clamp
         6       Wire support, see illustration for
                 one-side operation
         7       Tensioning jack
         8       Wire thimble

             Pulley

             • To guide the wire rope where
               the path is not a straight line
             • For Ø 5 mm wire with red PVC sheath
               (steel core: Ø 3 mm)

Note         According to EN 418, pulleys may only
             be mounted such that the complete
             length of the pull-wire can be observed.




326                                                                                         Schmersal
6.          Command devices
6.1         Pull-wire emergency stop switches
6.1.3       Accessories


            Wire clamp

            • 3 mm wire clamp
            • Available with stainless steel
            • Ordering unit: 1 piece




            Egg-shaped wire clamp

            • For wire rope Ø 3 mm steel core
            • Ordering unit: 1 piece




            Duplex wire clamp

            • Duplex wire clamp
            • For wire rope Ø 3 mm steel core
            • Ordering unit: 1 piece




Schmersal                                       327
6.      Command devices
6.1     Pull-wire emergency stop switches
6.1.3   Accessories


        Wire thimbles

        • To DIN 6899
        • For wire rope Ø 3 mm steel core,
          part number: Wire thimble 3B
        • Available with stainless steel
        • Ordering unit: 1 piece




        Eyebolts

        • To DIN 444
        • Eyebolt M 8 x 70 including nut,
          length referring to eye centre: 70 mm,
          thread length: 25 mm, thread: M 8 x 1.5
        • Available with stainless steel
        • Eyebolt BM 10 x 40 including nut
          (not shown)
          length referring to eye centre: 40 mm,
          thread: M 10 x 1.5
        • Ordering unit: 1 piece




        Tensioner

        • For exact adjustment of the tension
          of the wire rope
        • To DIN 1480
        • Tensioner M6:
          adjustable from 145 mm to 225 mm
        • Tensioner M8 (stainless steel) :
          adjustable from 160 mm to 255 mm
        • Ordering unit: 1 piece




328                                                 Schmersal
6.          Command devices
6.1         Pull-wire emergency stop switches
6.1.3       Accessories


            Tension spring

            • Only suitable for two-side operation
            • To maintain the reaction force
            • For T3Z 068, part number RZ-136E
            • For ZS 73 S and ZS 75 S,
              part number RZ-156I
            • Length approx. 185 mm (RZ-136E)
              or 130 mm (RZ-156I) without tension
            • Ordering unit: 1 piece




            Wire rope

            •   Steel core Ø 3 mm
            •   With red PVC sheath
            •   Ø 5 mm total
            •   Available with stainless steel




Schmersal                                            329
14.                EEx certified switches
14.1               Safety switches
14.1.5             Pull-wire emergency stop switches
14.1.5.4           Technical data

                                 EEx ZS 71                         EEx ZS 73          EEx ZS 75
Standards:                       IEC 60947-5-1/EN 60947-5-1; EN 418
EEx identification:              L II 2G EEx d IIC T6; L II 2D IP65 T80°C
Certification:                   PTB 03 ATEX 1070 X
Enclosure and cover:             Cast aluminium, enamelled
Protection class:                IP 65 push button reset and watertight collar;
                                 IP 54 key reset to IEC/EN 60529
Contact material:                Silver
Switching insert:                1 x EEx 14 VD                     1 x EEx 14 KU VD   1 x bzw. 2 x EEx 14 KU VD
Contact type:                    Change-over contact with single break
Switching system:                A IEC 60947-5-1; snap action
Termination:                     Cable H05VV-F 3 x 0.75 mm2
Rated impulse
withstand voltage Uimp:          4 kV
Rated insulation voltage Ui:     250 V
Thermal test current Ith:        6A
Utilisation category:            AC-15; DC-13
Rated operating
current/voltage Ie/Ue:           6 A/250 VAC; 0.25 A/230 VDC
Max. fuse rating:                6 A (slow blow)
Ambient temperature:             – 25 °C … + 70 °C
Mechanical life:                 > 1 million operations




870                                                                                                               Schmersal

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:3
posted:3/27/2010
language:English
pages:7
Description: 866 EEx certified switches Safety switches Pull-wire emergency