Docstoc

OFFICE OF THE - Download as DOC

Document Sample
OFFICE OF THE - Download as DOC Powered By Docstoc
					                                                  NO:EDOE/(Dev)/          of 2008-09
                                                          OFFICE OF THE
                                                  EXECUTIVE DISTRICT OFFICER EDUCATION
                                                  MIRPURKHAS, DATED:-     -     -2009
                                                  Ph No.0233-9290081
To,


                   The Director Information,
                   Sindh Karachi.

SUBJECT:-           CORIGENDUM OF TENDER NOTICE.
                    FOR PURCHASE OF FURNITURE & OTHER STORE ETC
                    UNDER VARIOUS ADP / NON ADP SCHEMES FOR THE YEAR
                    2008-09.

Ref:-           In continuation of this office letter No. EDOE/(Dev)/ 1032 dated 2-5-
2009


                   The seven copies of the Tender Notice are sent herewith for
publication in leading English, Sindhi & Urdu Daily News Papers (Daily JANG,
DAWN, KAWISH).
                    The bill in this regard in triplicate may please be sent to this office
for payment of the same.



                                                  EXECUTIVE DISTRIOFFICER
                                                  EDUCATION MIRPURKHAS
                                                    AND MEMBER OF THE
                                               DISTRICT PURCHASE COMMITTEE
                                             DISTRICT GOVERNMENT MIRPURKHAS.

                        Copy Forwarded with N.I.T (C.D) Compliance to the Worthy
Secretary Information technical (I.T) Government of Sindh Karachi with request for
arranging to place on the website of the Government of Sindh, Vide Notification
No. SO(C-1) SGA & CD/4-80/2006, dated 1st November, 2006.


                                               EXECUTIVE DISTRICT OFFICER
                                                EDUCATION MIRPURKHAS
                                                  AND MEMBER OF THE
                                             DISTRICT PURCHASE COMMITTEE
                                            DISTRICT GOVERNMENT MIRPURKHAS.




                Copy FWCS for information to:-
01/- The Secretary Education & Literacy Department Govt: of Sindh Karachi.
02/-The Zila Nazim District Government Mirpurkhas.
03/-The District Co-Ordination Officer, District Government Mirpurkhas.
04/- Mr. Ameer Hassan, Nazim U.C Kot Ghulam Mohammad / Councilor/ Member
     Zila Council & Member of District Purchase Committee Mirpurkhas.
05/- The Executive District Officer (F&P) & Member of District Purchase Committee
      Mirpurkhas.
06/- The Executive District Officer (W&S) & Member of District Purchase Committee
      Mirpurkhas.
                    TENDER NOTICE.
                    FOR PURCHASE OF FURNITURE & OTHER STORE ETC UNDER
                    VARIOUS ADP/NON ADP SCHEMES FOR THE YEAR 2008-09.


                     Tenders are invited from Firm /Company / Supplier /Contractors etc for
supply of the items/articles mentioned below:-

                                                                            EARNEST
               ARTICLES                  TOTAL             TENDER
 S#                                                                        MONEY 2.50%
                                        AMOUNT            FORM FEE
 01                 02                      03                 04                 05
        ADP 2008-09
 01          FURNITURE
            Elementary side             1530000-00           1000/=
            Sec: & HSS Side             1059000-00           1000/=
                TOTAL                   2589000-00           2000/=           129450/=
 02       Science Equipments             459000-00              --
                TOTAL                    459000-00            100/=            22950/=

              The blank tender form (Technical & Financial) .can be obtained from office of
the undersigned on cost basis from 15-05.2009 during office hours.

              Tender (Technical & Financial separately) should reach in the office of the
undersigned on or before 06.06.2009 (Saturday) at 12.00 Noon.

               The Tender will be open on the same day at 02-00 P.M. in the presence to
Tenderers or their agents if they desires so, in case due to absence of committee members or
under-signed on 06.06.2009 next dates for opening or 08.06.2009, 09.06.2009 and
10.06.2009 are any other date so notify on 06.06.2009.

                The earnest money 5% against each item shall be deposited to call
deposit / pay order in favour of the Executive District Officer Education & Member of
District Purchase Committee Mirpurkhas.

               The Terms & condition will be adopted as per pipra rule



                                                    EXECUTIVE DISTRICT OFFICER
                                                      EDUCATION MIRPURKHAS
                                                        AND MEMBER OF THE
                                                   DISTRICT PURCHASE COMMITTEE
                                                       DISTRICT GOVERNMENT
                                                           MIRPURKHAS.
                        TENDER FORM FOR PURCHASE OF FURNITURE
                             THROUGH A.D.P. 2008-2009.
                                  TECHNICAL
1.    Elementary                         Amounting to  Rs 1.530000
2.    Sec: & HSS                                       Rs:1.059000
                      TOTAL                            Rs: 2.589000 Million
 SR.
                   Name of Articles with Description/ Specification
 No.
  1.                                      2.
          CHAIR WITH ARM. ALL MADE OF SHESHAM WOOD.
          Complete Chair will be made of shisham wood. Seat 21”x18x17”
          Back legs height 36”. Front legs 1 ¾”x 1 ¾” (Slightly Tapered).
          Back legs 2” x 1 ¼”(from middle slightly curved). Seat patties 2
     01   ½”x1 ¼”, leg patties 1’x1’, Back upper patties 3”x1” (Slightly
          curved), Back lower Patties 2”x1”, Back strip (Middle) 3” ¾”.
          Back strip side 1” x ¾” (2 Nos) Arms 19”x2”x1”, Seat Knitted
          with best quality Singapore canon. Finished with spirit polish
          (Glossy Finish)
          CLASS TABLE. ALL MADE OF SHESHAM WOOD.
     02   Size: 4”x2 ½” top Formica pressed ½” thick chip board one
          drawer right side leg size 2”x2” size patty 5”x1” footers 2½ 1¼
          lock and key handle finish all wood spirit polish.
          DUAL DESKS. ALL MADE OF SHESHAM WOOD.
          Full Frame of Angle Iron 1.5”x 1.5”x1/8”, Size:
          30”x32”x26”, Top plane 30”x9”x1” Ink pot Patti
     03   30”x4”x1” Plank for books shelf 30”x7”x¾”. Seat Plank
          30” 10”x1” back 30” 5”x1” made shesham wood. Joint
                                                                             SPECIFICATION
          with screw angle iron frame black colour finish all wood               OFFER
          spirit polish.
          DUAL DESKS. ALL MADE OF SHESHAM WOOD.
          Size 48”x34”x30” Full frame of Iron Angle 1.5”x1.5”x1/8”
     04   support brackets 8 Nos. 1.5” thick. Top plank 48”x10”x1” Inkpot
          patti 48”x4”x1” Shat plank 48” x10”x1” seat back 48”x4”x1”
          shelf plak for books 48”x8”x ¾.

          MONO DESK ALL MADE OF SHESHAM WOOD
          Specification
          Size: 24”x28”x34”
          Top Plank: 24”x10”x7/8”
     05   Seat Plank: 19”x09”x7/8”
          Top and Back Side: 28”x7”x7/8”
          Ink Pot Patty: 24”x07”x7/8”
          Back Patty: 19”x04”x7/8”
          Shelf: 19”x07”x7/8”
          Shelf Support Patty: 19”x3”x7/8”
          STEEL ALMIRAH.
          Size 72”x34”x18” all made of one piece of steel, Sheet of 20
     06   Gauge with 4-shelves & 5-compartments, Double Locking system
          with Metallic handless and key holes cover in Nickel body hand
          doors grey brilliant synthetic enamel Spray paint.
      OFFICE TABLE (ALL MADE OF SHESHAM WOOD)
     4’x2½”x2½”Top, Sides, front & drawer box of the table will be of
     Lamination of teak color ¾’ thick. All open edges of the lamination
     boards hall must be sealed with 6mm thick Golden Teak beading.
     Tea Tray will be provided as shown in the drawing. Front, back &
     foot rails shall be of solid shisham wood. 6mm thick transparent
     glass will also be provided for table top. There will be three drawers
07   size 14”x20”, Drawers front lamination board.
     Drawer sides and back imported Partal wood.
     Bottom of drawer 6mm Lasani (MDF).
     Brass Handles of antique color, best quality china lock No.808 and
     ball bearing drawer channels with locking provision shall be used.
     French Polish (Spirit & Shellac) glossy finish.
     Note:- All wood used must be seasoned straight grain & free from
     all defect Specially sap. Material used shall be “A” grade.
     OFFICE TABLE (ALL MADE OF SHESHAM WOOD)
     Material Description
     Size: 36”x24”x30” Material Class room table will be used all in
08   fine line board /top will be ¾ thick texture formica 2153
     pressed German glue on top. One Drawer & one Box on right
     side. All edges of the table must be sealed with 5mm thick
     shesham. Furnish with sprit polish glossy furnish.

    STOOL MADE OF SHESHAM WOOD
   24”x11”x15” top wooden Plank size 11”x11”x7/8” in one pc
   frame Patti upper 3”x1 & lower 2”x1” legs size 2¼”x2¼”.
09 French Polish (Spirit & Shellac) glossy finish.
   Note:- All wood used must be seasoned straight grain & free
   from all defect Specially sap. Material used shall be “A”
   grade.
    TABLET CHAIR SEASONED SHESHAM WOOD:-Seat
    20”x17”xc17, full size for college. Front legs 2”x2”, front legs
    height 26” Back legs 1¼” x 1¼”x 36 ”Middle 2” widths slightly
10 curved. Seat patties 2”x1”, Tablet 22”x9”x¾” curved from 10”,
    back upper patties 4”x1” slightly curved in the middle, back lower SPECIFICATION
    patties 1½”x1” slightly curved in the middle (2-Nos) leg patties       OFFER
    1”x1”. Joint gluded superior polished seasoned fail wood, printed
    plywood seat.
    FILE RACK WOODEN:-
    Top, bottom, partition and both sides of the rack shall be
    fabricated with commercial veneer board ¾” thick. Back will be
11 of 6mm thick Lasani Board. Teak colour textured. Formica shall
    be pasted on top and both sides of the rack, inside be polished
    only. French Polish (Spirit & Shellac) Glossy finish. All material
    used shall be “A” Quality.
     PHYSICS PRACTICAL LAB TABLE ALL MADE OF SHESHAM
     WOOD
   8’x4’x3’. Complete Table with Top & drawer cabinet with shelf
   shall be of original MDF lamination board & shall be joined
   with 5”x1” Shisham wood rail. Edges of MDF shall be sealed
   with shesham/Golden Teak wood. Drawer front 7/8” thick
   shisham wood, side & back 5/8” thick imported new Partal
12 wood, bottom ¼” lasani wood metal handle of antique color
   with china lock No.808 shall be used. Metal drawer runner
   shall be used in all drawer finished with spirit polish (Glossy
   Finish).
     CHEMISTRY LAB TABLE ALL MADE OF SHESHAM WOOD
   Size 90’x48’x36’. All sides, Top, back, door, drawer box & its
   shelf shall be of original MDF Lamination board. All edges
   must be sealed with 6mm thick shisham/Golden Teak wood.
   Sindh 4 boxes with two drawer two doors & one shelf each
13 shall be joined by 6”x1” thick shisham wood rail. One bowl
   with two tabs & related fitting shall be provided. Footing 6”x1”
   of solid shisham wood. Drawer front 7/8” draw thick shisham
   wood. Sides & back 5/8” thick imported Partal wood (new),
   bottom ¼” lasani wood. Metal handle of antique color with
   china lock No.808 shall be used. Metal drawer runner bearing
   type shall be used in all drawers polish.
    BIOLOGY LAB TABLE
14 Size 8’x3’x3’ legs 2½”x2½” frame patti 3”x1¼”, top imported
   new partal wood 1” thick, Brackets 12 Nos. Finish with spirit
   polish (Glossy Finish).
    STEEL ALMIRAH WITH GLASS
   Size: 72”x34”x15”, 4 shelves, 5 compartments, 20 SWG, All
   sides, top, bottom, shelf & back made of one piece steel
   sheet and same gauge., looking system with Metallic handle
15 and key holes cover in Nickel. Almirah shall be in gray
   synthetic enamel spray paint (Hammer Finish). 5mm thick
   four glass pans shall be fitted in doors.



     OFFICE CHAIR WITH FOAM MADE OF SHESHAM
     WOOD:- Seat 21”x18”x17”, Front Legs 1¾”x1¾” Height 25”,
     Back Leg 1¾” x1¾” Height 37” Middle 2”Slightly curved, Seat
     Patties 2”x1¼”x1”, leg patties 1”x1”, Back upper patties 3”x1”,
     Back lower patties 2”x1”, Back strip Middle 2”x ¾” back strip
16   side 1”x ¾” (2-Nos), Arms 18”x2”x1” side seat, Structure Seat &
     Back shall be Shall be Mujahid Foam on Seat and Back shall be
     used and covered with light brown original Rexene finish all wood
     spirit polish.
                        TENDER FORM FOR PURCHASE OF FURNITURE
                             THROUGH A.D.P. 2008-2009.

                                        FINANCIAL
1.    Elementary                              Amounting to           Rs 1.530000
2.    Sec: & HSS                                                     Rs:1.059000
                      TOTAL                                          Rs: 2.589000 Million
 SR.                                                                               Rate per
                   Name of Articles with Description/ Specification           Qty:
 No.                                                                                  Item.
  1.                                      2.                                   3.       4.
          CHAIR WITH ARM. ALL MADE OF SHESHAM WOOD.
          Complete Chair will be made of shisham wood. Seat 21”x18x17”
          Back legs height 36”. Front legs 1 ¾”x 1 ¾” (Slightly Tapered).
          Back legs 2” x 1 ¼”(from middle slightly curved). Seat patties 2
 01.      ½”x1 ¼”, leg patties 1’x1’, Back upper patties 3”x1” (Slightly
          curved), Back lower Patties 2”x1”, Back strip (Middle) 3” ¾”.
          Back strip side 1” x ¾” (2 Nos) Arms 19”x2”x1”, Seat Knitted
          with best quality Singapore canon. Finished with spirit polish
          (Glossy Finish)
          CLASS TABLE. ALL MADE OF SHESHAM WOOD.
 02.      Size: 4”x2 ½” top Formica pressed ½” thick chip board one
          drawer right side leg size 2”x2” size patty 5”x1” footers 2½ 1¼
          lock and key handle finish all wood spirit polish.
          DUAL DESKS. ALL MADE OF SHESHAM WOOD.
          Full Frame of Angle Iron 1.5”x 1.5”x1/8”, Size:
          30”x32”x26”, Top plane 30”x9”x1” Ink pot Patti
 03.      30”x4”x1” Plank for books shelf 30”x7”x¾”. Seat Plank
          30” 10”x1” back 30” 5”x1” made shesham wood. Joint
          with screw angle iron frame black colour finish all wood
          spirit polish.
          DUAL DESKS. ALL MADE OF SHESHAM WOOD.
          Size 48”x34”x30” Full frame of Iron Angle 1.5”x1.5”x1/8”
 04.      support brackets 8 Nos. 1.5” thick. Top plank 48”x10”x1” Inkpot
          patti 48”x4”x1” Shat plank 48” x10”x1” seat back 48”x4”x1”
          shelf plak for books 48”x8”x ¾.
          MONO DESK (WOODEN)
          Specification
          Size: 24”x28”x34”
          Top Plank: 24”x10”x7/8”
     05   Seat Plank: 19”x09”x7/8”
          Top and Back Side: 28”x7”x7/8”
          Ink Pot Patty: 24”x07”x7/8”
          Back Patty: 19”x04”x7/8”
          Shelf: 19”x07”x7/8”
          Shelf Support Patty: 19”x3”x7/8”
          STEEL ALMIRAH.
          Size 72”x34”x18” all made of one piece of steel, Sheet of 20
     06   Guage with 4-shelves & 5-compartments, Double Locking system
          with Metallic handless and key holes cover in Nickel body hand
          doors grey brilliant synthetic enamel Spray paint.
      OFFICE TABLE
     4’x2½”x2½”Top, Sides, front & drawer box of the table will be of
     Lamination of teak color ¾’ thick. All open edges of the lamination
     boards hall must be sealed with 6mm thick Golden Teak beading.
     Tea Tray will be provided as shown in the drawing. Front, back &
     foot rails shall be of solid shisham wood. 6mm thick transparent
     glass will also be provided for table top. There will be three drawers
07   size 14”x20”, Drawers front lamination board.
     Drawer sides and back imported Partal wood.
     Bottom of drawer 6mm Lasani (MDF).
     Brass Handles of antique color, best quality china lock No.808 and
     ball bearing drawer channels with locking provision shall be used.
     French Polish (Spirit & Shellac) glossy finish.
     Note:- All wood used must be seasoned straight grain & free fvrom
     all defect Specially sap. Material used shall be “A” grade.


     OFFICE TABLE
     Material Description
     Size: 36”x24”x30” Material Class room table will be used all in
08   fine line board /top will be ¾ thick texture formica 2153
     pressed Germon glue on top. One Drawer & one Box on right
     side. All edges of the table must be sealed with 5mm thick
     shesham. Furnish with sprit polish glossy furnish.

      STOOL MADE OF SHESHAM WOOD
     24”x11”x15” top wooden Plank size 11”x11”x7/8” in one pc
     frame patti upper 3”x1 & lower 2”x1” legs size 2¼”x2¼”.
09   French Polish (Spirit & Shellac) glossy finish.
     Note:- All wood used must be seasoned straight grain & free
     from all defect Specially sap. Material used shall be “A”
     grade.
      TABLET CHAIR SEASONED SHESHAM WOOD:-Seat
      20”x17”xc17, full size for college. Front legs 2”x2”, front legs
      height 26” Back legs 1¼” x 1¼”x 36 ”Middle 2” widths slightly
10    curved. Seat patties 2”x1”, Tablet 22”x9”x¾” curved from 10”,
      back upper patties 4”x1” slightly curved in the middle, back lower
      patties 1½”x1” slightly curved in the middle (2-Nos) leg patties
      1”x1”. Joint gluded superior polished seasoned fail wood, printed
      plywood seat.
      FILE RACK WOODEN:-
      Top, bottom, partition and both sides of the rack shall be
      fabricated with commercial veneer board ¾” thick. Back will be
11    of 6mm thick Lasani Board. Teak colour textured. Formica shall
      be pasted on top and both sides of the rack, inside be polished
      only. French Polish (Spirit & Shellac) Glossy finish. All material
      used shall be “A” Quality.
      PHYSICS PRACTICAL LAB TABLE
     8’x4’x3’. Complete Table with Top & drawer cabinet with shelf
     shall be of original MDF lamination board & shall be joined
     with 5”x1” Shisham wood rail. Edges of MDF shall be sealed
12   with shisham/Golden Teak wood. Drawer front 7/8” thick
     shisham wood, side & back 5/8” thick imported new Partal
     wood, bottom ¼” lasani wood metal handle of antique color
     with china lock No.808 shall be used. Metal drawer runner
     shall be used in all drawer finished with spirit polish (Glossy
     Finish).
      CHEMISTRY LAB TABLE
13   Size 90’x48’x36’. All sides, Top, back, door, drawer box & its
     shelf shall be of original MDF Lamination board. All edges
   must be sealed with 6mm thick shisham/Golden Teak wood.
   Sindh 4 boxes with two drawer two doors & one shelf each
   shall be joined by 6”x1” thick shisham wood rail. One bowl
   with two tabs & related fitting shall be provided. Footing 6”x1”
   of solid shisham wood. Drawer front 7/8” draw thick shisham
   wood. Sides & back 5/8” thick imported Partal wood (new),
   bottom ¼” lasani wood. Metal handle of antique color with
   china lock No.808 shall be used. Metal drawer runner bearing
   type shall be used in all drawers polish.
    BIOLOGY LAB TABLE
14 Size 8’x3’x3’ legs 2½”x2½” frame patti 3”x1¼”, top imported
   new partal wood 1” thick, Brackets 12 Nos. Finish with spirit
   polish (Glossy Finish).
    STEEL ALMIRAH WITH GLASS
   Size: 72”x34”x15”, 4 shelves, 5 compartments, 20 SWG, All
   sides, top, bottom, shelf & back made of one piece steel
   sheet and same gauge., looking system with Metallic handle
15 and key holes cover in Nickel. Almirah shall be in gray
   synthetic enamel spray paint (Hammer Finish). 5mm thick
   four glass pans shall be fitted in doors.


     OFFICE CHAIR WITH FOAM MADE OF SHESHAM
     WOOD:- Seat 21”x18”x17”, Front Legs 1¾”x1¾” Height 25”,
     Back Leg 1¾” x1¾” Height 37” Middle 2”Slightly curved, Seat
     Patties 2”x1¼”x1”, leg patties 1”x1”, Back upper patties 3”x1”,
16   Back lower patties 2”x1”, Back strip Middle 2”x ¾” back strip
     side 1”x ¾” (2-Nos), Arms 18”x2”x1” side seat, Structure Seat &
     Back shall be Shall be Mujahid Foam on Seat and Back shall be
     used and covered with light brown original Rexene finish all wood
     spirit polish.
        TENDER FORM FOR PURCHASE OF SCIENCE EQUIPMENT
                             THROUGH A.D.P. 2008-2009.
                                  TECHNICAL
Sec: & HSS SIDE.                     Amounting to      Rs 0.4590 MILLION


 SR.
               Name of Articles with Description/ Specification
 No.
  1.                                  2.                                    3.                         4.
PHYSICS DEPARTMENT
    Rheostats 100 Ohms (China)
  1
    with slide control
    RESISTANCE BOX
  2
    3 Dial deade dial type total range
    Spherometer
  3 Complete made of brass with upward and downward movement
    with out play, with fine watch glass.
    Concave                                              Mirror
  4
     2.5" Dia with supier polish Imported
    Convex                                                Lens
  5
    2" Dia White Glass Imported
  6 Law of Moments Apparatus (China)
  7 Charls Law Apparatus
  8 Glass Prism 2”
  9 Calorimeter in wooden box with copper pot and stirer
    Drawing Board
 10




                                                                                 SPECIFICATION OFFER
    with Cork sheet 12”x14”
    Digital Stop Watch (SWISS)
 11
    Stainless Steel Body , 1/100 Second
       GALVANOMETER BENCH TYPE (GERMANY                           /   UK)
 12
       Western Type 30-0-30 moving Coil, with reflex mirror
       Liner Expansion Apparatus
 13    Complete with brass fitting mounted on metal base with three rods
       of diff masses
       Digital Power Supply (Korea)
 14
       Regulated 0-15 Volt 2 Amp.
 15    Rubber pad
       Resonance Tube Apparatus Complete
 16
       With st. Steel reservoir and plastic resonance Tube
 17    Rubber Tube (China)
 18    Regnault Calorimeter
 19    Meter Scale Full Stainless Steel (China)
       Ammeter Bench Type (Germany / UK)
 20    Multi Range of Current in a meter 1.5 Class ,zero adjustment in
       front , with three socket terminal.
       Voltmeter Bench Type (Germany / UK)
 21    Multi Range in a Voltmeter 1.5 Class ,zero adjustment in front ,
       with three socket terminal
 22    Half Meter Scale
 23    Mercury Pure
 24    Magnetic Compass ¾” (Japan)
 25    Newton Law of Colling Apparatus
       Hooks Law Apparatus Complete
 26    with metalic base, each weight 20 Gram , total 100 Gram with
       pointer and accurate Spring.
      Sonometer Complete
 27
      with wire and bridge pully.
      Bar Pendulum Bob
 28
      Standard Set (One Meter Lenth)
 29   Sodium Lamp Complete
 30   Steam Boiler Copper
 31   Spring Balance 500 Gram (China)
      Pully Board with rubber sheet fix pully and 3 Sets of Sloted
 32
      Weight Complete Set for Law of Parallogram
 33   Atomic Model Set
      TRAVELLING MICROSCOPE (Imported)
      Horizontal and Vertical measurement to 0.1mm.Easily read scale
      0 to 150 Xi mm has double length vernier which can be reasd to
 34
      0.1mm the fine adjustment centrally cover 14mm of movement
      and microscope bady may be rotated through a full 360o.the
      diacast is 295x96x111mm high with a plasti cover
      VERNIER CALIPERES (CHINA)
    Direct reading precession vernier stainless stell with dial scale 0 to
    15 cm x 0.1mm precessoion ground jaws and cross horns with
 35
    chamfered and relieved each for measuring small objects screw
    lock and depth guage Depth of jaws 45mm depth of cross horns
    20mm overall length 230mm maximun reading 150mm with case
    MICROMETER SCREW GUAGE (CHINA)
 36




                                                                             SPECIFICATION OFFER
    Supplied in Case 0 to 25mm graduated to 0.01mm.
 37 Vibrograph
 38 Weight for Sonometer 2.5 Kg
 39 Bar Mangenet (China)
 40 Oscilloscope 10 Mhz (Japan)
BOTANY DEPARTMENT
 41 Molls Apparatus
 42 Oculer Micrometer ( Imported )
 43 Respiroscope
 44 Thistle Funnel
 45 Volumetric Flask 500ml (China)
    Compound Microscope Model L101 (China)
 46 with angular monocular head with three objective three eye piece
    plano concave mirror illumination system.
    Balance Digital (Tiwan)
 47
    Top Loading Pan Sensitivity 0.001 kg
ZOOLOGY ITEMS
    Prepared Slide (China)
 48  Paramicium
 49  Euglena
 50  Chalmydonomas
 51  Ameoba
 52  Dicot Leaf
 53  Dicot Steam
 54  Dicot Root
 55  Animal Cell
 56  Spirogyra
 57  Plant Cell
 58  Mioses
 59  Mitosis
 60  Fungi Yeast
 61  Monocot Leaf
 62  Monocot Root
 63  Frog Veints TS
64    Mammal Vein TS
65    Mammal Stemch
66    Mammal Smouth Mouse
67    Mammal Smouth Creft
68    Mammal Strated
69    Protozoa
     Cover Slip (China)
70
     Size 18x18 mm sealed pack of 100
     Compound Microscope (China)
71
     Model XSP-22 , Complete Set in Wooden Box
     Dissecting Microscope (Japan)
72
     Complete Set with eye pics & wings in wooden box.
     Dissection                                             Box
73   Complete with Accessories St. Steel Pouch Type Packing with
     Spair Blade.
     Slide Viewar (Hong Kong)
74
     Model No. ;101A
75   Disection Try with wax
     Magnifying Glass (Imported)
76
     Size 3 Inch with Hand
     Plain Slide (China)
77
     with groud edge 1"x3" sealed pack of 100 Pcs
     Test Tube Stand
78




                                                                        SPECIFICATION OFFER
     Stainess Steel for 12 tube
     Bell Jar (China)
79
     Size 150 x250 mm
80   Cobalt Chloride Paper
     Dropping Bottle Brown China
81
     Size 60 ml
82   Ganongs Photo Meter (Pyrex)
83   Reagent Bottle (China)
     (a) Size 125 ml N/M
     (b) Size 250 ml N/M
     (c) Size 500 ml N/M
     (d) Size 1000 ml N/M
CHEMISTRY ITEMS
     Bunson Burner
     with Brass Pipe Matel Base
84

85   Beaker Glass Graduated (China)
     (a)    Vol 250ml
     (b) Vol 500ml
     (c)    Vol 1000ml
     Burette 50 ml (China)
86
     Pinch Cock Type
87   Capillary tube
88   Cork Rubber
     Conical Flask Glass Graduated (China)
89
     (a) Vol 250 ml
     China Dish (China)
90
     Size 30 cc
     Distillation Plant (China)
91   Stainless Steel 10 Liter , operated on 220 volt with rubber tube
     and glass lid to see boiled water level.
     Dropping Bottle (China)
92
     Vol 60 ml
      Distillation Flask (Pyrex)
93
      Vol 250ml
      Funnel Stand
94
      Complete metalic
95    Filter Paper Sheet
      Flat Bottom Flask Glass (China)
96
      Vol 250 ml
97    Glass Funnel 90 mm (China)
98    Ignition tube
      Iron Stand
99    with Cast Iron Base with Improrted Double Bureete Clamp for use
      two practical of Tritration
      Kipps Apparatus (China)
100
      Size 500ml
      Measureing Flask (China)
101
      Vol 1000 ml
      Measuring Flask (China)
102
      Vol 500 ml
      Measuring Flask (China)
103
      Vol 250 ml
104   Pestle and Morter 150mm (China)
      Centrifuge Machine (China)
105
      6 tube Electrical operated on 220 Volt




                                                                            SPECIFICATION OFFER
      Pipette Glass (China)
106
      Bulb Type Vol 10 ml
      Reagent Bottle (China)
107
      Vol 125 ml N/M
      Reagent Bottle (China)
108
      Vol 250 ml N/M
      Reagent Bottle (China)
109
      Vol 500ml N/M
      Reagent Bottle (China)
110
      Vol 1000 NM
      Reagent Bottle (China)
111
      Vol 2500 NM
      Rubber Tubing (China)
112
      for Burette Orignal soft
      Reagent Bottle (China)
113
      with Glass Stopper Vol 250 ml
      Oven Electric for Lab (China)
      Rang of Temperature control 20-60 Degree, Digital Counter
114
      Display, Power Rated: 300W, Inside Dimention: 30cm (W) x 30cm (D) x
      34cm (H) , Operated 220V
      Physical Balance (China)
115
      with Weight Box
      Triple Beam Balance (OHAUS)
116
      Model 750 SW
117   Thermometer 200 Degree (China)
118   Test Tube 15x150 mm (China)
119   Test Tube Holder
      PH METER (GERMANY)
120
      Portable Type Model : PHB-1
121   Tripod Stand 6” Metallic
122   Pair of Tong
123   Wire Gauge 6”x6”
124   Watch Glass 3”
125   Electronic Balance Capacity 600 GR
126 Micrometer Screw gauge 0.25 mm
127 Dissection Microscope
128 Model of Castor Oil Seed
129 Model Mecosis
130 Venire LCO 10 em St.Steel
131 Drawing Board
APPRATUS FOR BIOLOGY DEPARTMENT (IInd)
 1  Iodine Solution
 2  Methyl Blue Solution
 3  Neutral Red Solution
 4  Ringers Solution
 5  Starch Solution
 6  Hcl
 7  Ag No3
 8  China Dish
 9  Test Tubes (Large Size)
10 Test Tubes (Small Size)
11 Methylamine Blue
12 Petri Dish
13 Droppin
14 Acetic Acid
15 Slides
16 Amoeba




                                           SPECIFICATION OFFER
17 Paramecium
18 Euglena
19 Nostoc
20 Charts of all kind
21 Dish (China) Large Size
22 Saturcteu Solution
23 Oxale Solution
24 Compound Microscope Disection Boxes
25 Chloroform
26 Discection Dish
27 Pins
28 Sprit
29 Megniting Glass
30 Glass Slides
31 Glass Couer
32 Watch Glass
33 Mounting Needle
34 Glyessrin
35 Camda Balsm Clove Oil
36 Xylem
37 Alchohal
38 Borax Carmene
39 Blood Group Ket
40 Beaker (Large)
41 Beaker (Small)
42 Stands
43 30% Sulfur Solution
44 Theistic Fumed
45 Match Box
46 Bell Jar
       APPRATUS FOR CHEMISTRY DEPARTMENT
 1  China Dish
 2  Funnel Beaker
 3  Commercial Copper Sulphate
 4  Glass Rad
 5  Filter Paper
 6  Sand Bath Burner
 7  Thero Meter
 8  Stands / Burner Stands
 9  Capillarag Tubes
10  Glass Stitrer
11  Fustos Tubes
12  Burette Pipette
13  Conical Flask
14  Measuring Flask
15  Indicator
16  Test Tubes
17  Iron Stands
18  Round Bottom Flask
19  Safty Trap
20  Cotton Plug
21  Paper Warpe
22  Volume Meterlic Flask
23  Plend Phalem
24  Iron Stand
                            CHEMICALS




                                                          SPECIFICATION OFFER
25 Sulphric Acid
26 Oxalic Acid
27 Benzene
28 Paraffin Oil
29 Sodium Hydroxide
30 Naphthalime
31 Methyl Orange
32 Hcl
33 Nacl (Common Salt)
34 K (Potshume)
35 Zehiloro Form
36 Zinc + Clorine
37 Iodine
38 Murrquree
39 Sulphar
APPRATUS FOR PHYSICS DEPARTMENT
 1  Vernier Caliper
 2  Sphere to Vernier Caliper
 3  Solid Cylender for Vernier Caliper
 4  Test Tube for Vernier Caliper
 5  Micro Meter Screue Guage
 6  Small Sphere of Verious Sizes for Micro Meter Guage
 7  Sphero Meter
 8  Base Plant for Sphero Meter
 9  Spherical Surface for Sphero Meter
10 Glass Strip for Sphero Meter
11 Force Fall Appratus
12 White Paper Sheet
13 Alpha hensive Tape
14 Candle
15 Helical Springs
16 Pans
17 Sloted Weights
18   Meter Rod
19   Stands for Helical Springs
20   Ripple Tank
21   Stop Watch
22   Pencils
23   Traveling Micro Scope
24   Glass Slabe for T. Micro Scope
25   Chalk Dust
26   Concare Mirror
27   Stand with Clipmp for refrection index
28   Cork with a Pin
29   Glycerine
30   Cappilary Tube
31   Beaker
32   Electricity Maintained Tuning fork
33   A.C Supply
34   Conex Lenses of Diff: Focal Length
35   Up-rights with holder
36   Needles with stand
37   Concave Lens
38   Concave Mirrors
39   Meter Scale
40   Metalic bob of Diff: measses




                                              SPECIFICATION OFFER
41   Splitted corck
42   Iron Stand
43   Wooden Stoips
44   Wooden Stands with Clips
45   Vertical Drawing Boards
46   Frictionalers Pulleys
47   Fixing Pins
48   Tap Soalution of verios size
49   Geometry Box
50   Slotted Weights with hanger
51   Resonance tube apparatus
52   Tuning fork of known frequencies
53   Rubber Paid
54   Thermometers
55   Sono Meter with Hanger
56   Glass prisn of various sizes
57   Office Pins
58   Convex Lens with stands
59   Newtons Rings Appratus
60   Plano Conex Lens of Large Focal Length
61   Sodium Lamps
62   Spectro Meter
63   Sprit
64   Diffraction grating spirity level
65   Clori Meter with a striner rod a lid
66   Heating arrangements
67   Baker of various sizes
68   Pulliyers apparatus
69   Steam Boiler
70   Rubber Tube
71   Regnants Appratus
72   Sensitive Thermometer
73   Physical Balance
74    Bloting Paper
75    Constant Volume air Thermometer
76    Set Square
77    Double Electric Calorimeter
78    Voltmeter / Ammeter
79    A Meter
80    Battery Various Power
81    Rheotate
82    Plang Key
83    Connecting Wires
84    Half Degree Celsius Thermomter
85    Glavano Meter
86    Low Resistance Box
87    High Resistance Box
88    Lach Lenchi Cell
89    Dry Cell
90    Meter Bridge
91    Jockey Resistance Box
92    Resistance Wire fixed on a wooden Board
93    Un Known Resistance Coil




                                                               SPECIFICATION OFFER
94    Post Office Box
95    Copper Volt Meter
      Horizontal Wooden board with a vertical coil having in
96
      known number
 97   Magnetic Needles
 98   12 Volts Steps down transformer
 99   A.C Volt Meter
100   A.C Milli Ammeter
101   Capacitor of Different Values
102   Semi Conduct Diode
103   06 Volt Battries
104   Resistance of about 10Ohm’s
105   Turpentone
106   Measuring Cylinder of various sizes
107   Blockened Calorimeter
108   Searle’s Appratus
109   Constant heat Appratus
110   Jonle’s Calirimeter with Stirrer
111   Potentional Meter
112   Daniel Cell
113   Wastan Cell
114   Battery Rheostat
115   Car Bulb (12 Volts & 36 Watts)
116   Ammeters Range
117   Volt Meter (12 Volt range)
118   Transister 0 C 71 (Mu;; or similar)
119   Micro Ammeter / Mili Ammeter
120   Photo Electrical Cell
121   Electric Lamp (Mecury Lamp)
122   Optical Bench
        TENDER FORM FOR PURCHASE OF SCIENCE EQUIPMENT
                             THROUGH A.D.P. 2008-2009.
                                  FINANICAL
Sec: & HSS SIDE.                     Amounting to      Rs 0.4590 MILLION


 SR.                                                                               Rate per
               Name of Articles with Description/ Specification             Qty:
 No.                                                                                Item.
  1.                                  2.                                     3.       4.
PHYSICS DEPARTMENT
    Rheostats 100 Ohms (China)
  1
    with slide control
    RESISTANCE BOX
  2
    3 Dial deade dial type total range
    Spherometer
  3 Complete made of brass with upward and downward movement
    with out play, with fine watch glass.
    Concave                                              Mirror
  4
     2.5" Dia with supier polish Imported
    Convex                                                Lens
  5
    2" Dia White Glass Imported
  6 Law of Moments Apparatus (China)
  7 Charls Law Apparatus
  8 Glass Prism 2”
  9 Calorimeter in wooden box with copper pot and stirer
    Drawing Board
 10
    with Cork sheet 12”x14”
    Digital Stop Watch (SWISS)
 11
    Stainless Steel Body , 1/100 Second
       GALVANOMETER BENCH TYPE (GERMANY                           /   UK)
 12
       Western Type 30-0-30 moving Coil, with reflex mirror
       Liner Expansion Apparatus
 13    Complete with brass fitting mounted on metal base with three rods
       of diff masses
       Digital Power Supply (Korea)
 14
       Regulated 0-15 Volt 2 Amp.
 15    Rubber pad
       Resonance Tube Apparatus Complete
 16
       With st. Steel reservoir and plastic resonance Tube
 17    Rubber Tube (China)
 18    Regnault Calorimeter
 19    Meter Scale Full Stainless Steel (China)
       Ammeter Bench Type (Germany / UK)
 20    Multi Range of Current in a meter 1.5 Class ,zero adjustment in
       front , with three socket terminal.
       Voltmeter Bench Type (Germany / UK)
 21    Multi Range in a Voltmeter 1.5 Class ,zero adjustment in front ,
       with three socket terminal
 22    Half Meter Scale
 23    Mercury Pure
 24    Magnetic Compass ¾” (Japan)
 25    Newton Law of Colling Apparatus
 26    Hooks Law Apparatus Complete
      with metalic base, each weight 20 Gram , total 100 Gram with
      pointer and accurate Spring.
      Sonometer Complete
 27
      with wire and bridge pully.
      Bar Pendulum Bob
 28
      Standard Set (One Meter Lenth)
 29   Sodium Lamp Complete
 30   Steam Boiler Copper
 31   Spring Balance 500 Gram (China)
      Pully Board with rubber sheet fix pully and 3 Sets of Sloted
 32
      Weight Complete Set for Law of Parallogram
 33   Atomic Model Set
      TRAVELLING MICROSCOPE (Imported)
      Horizontal and Vertical measurement to 0.1mm.Easily read scale
      0 to 150 Xi mm has double length vernier which can be reasd to
 34
      0.1mm the fine adjustment centrally cover 14mm of movement
      and microscope bady may be rotated through a full 360o.the
      diacast is 295x96x111mm high with a plasti cover
      VERNIER CALIPERES (CHINA)
    Direct reading precession vernier stainless stell with dial scale 0 to
    15 cm x 0.1mm precessoion ground jaws and cross horns with
 35
    chamfered and relieved each for measuring small objects screw
    lock and depth guage Depth of jaws 45mm depth of cross horns
    20mm overall length 230mm maximun reading 150mm with case
    MICROMETER SCREW GUAGE (CHINA)
 36
    Supplied in Case 0 to 25mm graduated to 0.01mm.
 37 Vibrograph
 38 Weight for Sonometer 2.5 Kg
 39 Bar Mangenet (China)
 40 Oscilloscope 10 Mhz (Japan)
BOTANY DEPARTMENT
 41 Molls Apparatus
 42 Oculer Micrometer ( Imported )
 43 Respiroscope
 44 Thistle Funnel
 45 Volumetric Flask 500ml (China)
    Compound Microscope Model L101 (China)
 46 with angular monocular head with three objective three eye piece
    plano concave mirror illumination system.
    Balance Digital (Tiwan)
 47
    Top Loading Pan Sensitivity 0.001 kg
ZOOLOGY ITEMS
    Prepared Slide (China)
 48  Paramicium
 49  Euglena
 50  Chalmydonomas
 51  Ameoba
 52  Dicot Leaf
 53  Dicot Steam
 54  Dicot Root
 55  Animal Cell
 56  Spirogyra
 57  Plant Cell
 58  Mioses
 59  Mitosis
 60  Fungi Yeast
 61  Monocot Leaf
62    Monocot Root
63    Frog Veints TS
64    Mammal Vein TS
65    Mammal Stemch
66    Mammal Smouth Mouse
67    Mammal Smouth Creft
68    Mammal Strated
69    Protozoa
     Cover Slip (China)
70
     Size 18x18 mm sealed pack of 100
     Compound Microscope (China)
71
     Model XSP-22 , Complete Set in Wooden Box
     Dissecting Microscope (Japan)
72
     Complete Set with eye pics & wings in wooden box.
     Dissection                                             Box
73   Complete with Accessories St. Steel Pouch Type Packing with
     Spair Blade.
     Slide Viewar (Hong Kong)
74
     Model No. ;101A
75   Disection Try with wax
     Magnifying Glass (Imported)
76
     Size 3 Inch with Hand
     Plain Slide (China)
77
     with groud edge 1"x3" sealed pack of 100 Pcs
     Test Tube Stand
78
     Stainess Steel for 12 tube
     Bell Jar (China)
79
     Size 150 x250 mm
80   Cobalt Chloride Paper
     Dropping Bottle Brown China
81
     Size 60 ml
82   Ganongs Photo Meter (Pyrex)
83   Reagent Bottle (China)
     (a) Size 125 ml N/M
     (b) Size 250 ml N/M
     (c) Size 500 ml N/M
     (d) Size 1000 ml N/M
CHEMISTRY ITEMS
     Bunson Burner
     with Brass Pipe Matel Base
84

85   Beaker Glass Graduated (China)
     (a)    Vol 250ml
     (b) Vol 500ml
     (c)    Vol 1000ml
     Burette 50 ml (China)
86
     Pinch Cock Type
87   Capillary tube
88   Cork Rubber
     Conical Flask Glass Graduated (China)
89
     (a) Vol 250 ml
     China Dish (China)
90
     Size 30 cc
     Distillation Plant (China)
91   Stainless Steel 10 Liter , operated on 220 volt with rubber tube
     and glass lid to see boiled water level.
      Dropping Bottle (China)
92
      Vol 60 ml
      Distillation Flask (Pyrex)
93
      Vol 250ml
      Funnel Stand
94
      Complete metalic
95    Filter Paper Sheet
      Flat Bottom Flask Glass (China)
96
      Vol 250 ml
97    Glass Funnel 90 mm (China)
98    Ignition tube
      Iron Stand
99    with Cast Iron Base with Improrted Double Bureete Clamp for use
      two practical of Tritration
      Kipps Apparatus (China)
100
      Size 500ml
      Measureing Flask (China)
101
      Vol 1000 ml
      Measuring Flask (China)
102
      Vol 500 ml
      Measuring Flask (China)
103
      Vol 250 ml
104   Pestle and Morter 150mm (China)
      Centrifuge Machine (China)
105
      6 tube Electrical operated on 220 Volt
      Pipette Glass (China)
106
      Bulb Type Vol 10 ml
      Reagent Bottle (China)
107
      Vol 125 ml N/M
      Reagent Bottle (China)
108
      Vol 250 ml N/M
      Reagent Bottle (China)
109
      Vol 500ml N/M
      Reagent Bottle (China)
110
      Vol 1000 NM
      Reagent Bottle (China)
111
      Vol 2500 NM
      Rubber Tubing (China)
112
      for Burette Orignal soft
      Reagent Bottle (China)
113
      with Glass Stopper Vol 250 ml
      Oven Electric for Lab (China)
      Rang of Temperature control 20-60 Degree, Digital Counter
114
      Display, Power Rated: 300W, Inside Dimention: 30cm (W) x 30cm (D) x
      34cm (H) , Operated 220V
      Physical Balance (China)
115
      with Weight Box
      Triple Beam Balance (OHAUS)
116
      Model 750 SW
117   Thermometer 200 Degree (China)
118   Test Tube 15x150 mm (China)
119   Test Tube Holder
      PH METER (GERMANY)
120
      Portable Type Model : PHB-1
121   Tripod Stand 6” Metallic
122   Pair of Tong
123   Wire Gauge 6”x6”
124 Watch Glass 3”
125 Electronic Balance Capacity 600 GR
126 Micrometer Screw gauge 0.25 mm
127 Dissection Microscope
128 Model of Castor Oil Seed
129 Model Mecosis
130 Venire LCO 10 em St.Steel
131 Drawing Board
APPRATUS FOR BIOLOGY DEPARTMENT (IInd)
 1  Iodine Solution
 2  Methyl Blue Solution
 3  Neutral Red Solution
 4  Ringers Solution
 5  Starch Solution
 6  Hcl
 7  Ag No3
 8  China Dish
 9  Test Tubes (Large Size)
10 Test Tubes (Small Size)
11 Methylamine Blue
12 Petri Dish
13 Droppin
14 Acetic Acid
15 Slides
16 Amoeba
17 Paramecium
18 Euglena
19 Nostoc
20 Charts of all kind
21 Dish (China) Large Size
22 Saturcteu Solution
23 Oxale Solution
24 Compound Microscope Disection Boxes
25 Chloroform
26 Discection Dish
27 Pins
28 Sprit
29 Megniting Glass
30 Glass Slides
31 Glass Couer
32 Watch Glass
33 Mounting Needle
34 Glyessrin
35 Camda Balsm Clove Oil
36 Xylem
37 Alchohal
38 Borax Carmene
39 Blood Group Ket
40 Beaker (Large)
41 Beaker (Small)
42 Stands
43 30% Sulfur Solution
44 Theistic Fumed
45 Match Box
46 Bell Jar
                APPRATUS FOR CHEMISTRY DEPARTMENT
 1  China Dish
 2  Funnel Beaker
 3  Commercial Copper Sulphate
 4  Glass Rad
 5  Filter Paper
 6  Sand Bath Burner
 7  Thero Meter
 8  Stands / Burner Stands
 9  Capillarag Tubes
10  Glass Stitrer
11  Fustos Tubes
12  Burette Pipette
13  Conical Flask
14  Measuring Flask
15  Indicator
16  Test Tubes
17  Iron Stands
18  Round Bottom Flask
19  Safty Trap
20  Cotton Plug
21  Paper Warpe
22  Volume Meterlic Flask
23  Plend Phalem
24  Iron Stand
                            CHEMICALS
25 Sulphric Acid
26 Oxalic Acid
27 Benzene
28 Paraffin Oil
29 Sodium Hydroxide
30 Naphthalime
31 Methyl Orange
32 Hcl
33 Nacl (Common Salt)
34 K (Potshume)
35 Zehiloro Form
36 Zinc + Clorine
37 Iodine
38 Murrquree
39 Sulphar
APPRATUS FOR PHYSICS DEPARTMENT
 1  Vernier Caliper
 2  Sphere to Vernier Caliper
 3  Solid Cylender for Vernier Caliper
 4  Test Tube for Vernier Caliper
 5  Micro Meter Screue Guage
 6  Small Sphere of Verious Sizes for Micro Meter Guage
 7  Sphero Meter
 8  Base Plant for Sphero Meter
 9  Spherical Surface for Sphero Meter
10 Glass Strip for Sphero Meter
11 Force Fall Appratus
12 White Paper Sheet
13 Alpha hensive Tape
14   Candle
15   Helical Springs
16   Pans
17   Sloted Weights
18   Meter Rod
19   Stands for Helical Springs
20   Ripple Tank
21   Stop Watch
22   Pencils
23   Traveling Micro Scope
24   Glass Slabe for T. Micro Scope
25   Chalk Dust
26   Concare Mirror
27   Stand with Clipmp for refrection index
28   Cork with a Pin
29   Glycerine
30   Cappilary Tube
31   Beaker
32   Electricity Maintained Tuning fork
33   A.C Supply
34   Conex Lenses of Diff: Focal Length
35   Up-rights with holder
36   Needles with stand
37   Concave Lens
38   Concave Mirrors
39   Meter Scale
40   Metalic bob of Diff: measses
41   Splitted corck
42   Iron Stand
43   Wooden Stoips
44   Wooden Stands with Clips
45   Vertical Drawing Boards
46   Frictionalers Pulleys
47   Fixing Pins
48   Tap Soalution of verios size
49   Geometry Box
50   Slotted Weights with hanger
51   Resonance tube apparatus
52   Tuning fork of known frequencies
53   Rubber Paid
54   Thermometers
55   Sono Meter with Hanger
56   Glass prisn of various sizes
57   Office Pins
58   Convex Lens with stands
59   Newtons Rings Appratus
60   Plano Conex Lens of Large Focal Length
61   Sodium Lamps
62   Spectro Meter
63   Sprit
64   Diffraction grating spirity level
65   Clori Meter with a striner rod a lid
66   Heating arrangements
67   Baker of various sizes
68   Pulliyers apparatus
69   Steam Boiler
70    Rubber Tube
71    Regnants Appratus
72    Sensitive Thermometer
73    Physical Balance
74    Bloting Paper
75    Constant Volume air Thermometer
76    Set Square
77    Double Electric Calorimeter
78    Voltmeter / Ammeter
79    A Meter
80    Battery Various Power
81    Rheotate
82    Plang Key
83    Connecting Wires
84    Half Degree Celsius Thermomter
85    Glavano Meter
86    Low Resistance Box
87    High Resistance Box
88    Lach Lenchi Cell
89    Dry Cell
90    Meter Bridge
91    Jockey Resistance Box
92    Resistance Wire fixed on a wooden Board
93    Un Known Resistance Coil
94    Post Office Box
95    Copper Volt Meter
      Horizontal Wooden board with a vertical coil having in
96
      known number
 97   Magnetic Needles
 98   12 Volts Steps down transformer
 99   A.C Volt Meter
100   A.C Milli Ammeter
101   Capacitor of Different Values
102   Semi Conduct Diode
103   06 Volt Battries
104   Resistance of about 10Ohm’s
105   Turpentone
106   Measuring Cylinder of various sizes
107   Blockened Calorimeter
108   Searle’s Appratus
109   Constant heat Appratus
110   Jonle’s Calirimeter with Stirrer
111   Potentional Meter
112   Daniel Cell
113   Wastan Cell
114   Battery Rheostat
115   Car Bulb (12 Volts & 36 Watts)
116   Ammeters Range
117   Volt Meter (12 Volt range)
118   Transister 0 C 71 (Mu;; or similar)
119   Micro Ammeter / Mili Ammeter
120   Photo Electrical Cell
121   Electric Lamp (Mecury Lamp)
122   Optical Bench
                               OFFICE OF THE
                   EXECUTIVE DISTRICT OFFICER (EDUCATION)
                           DISTRICT MIRPURKHAS.

                     TENDER FORM FEE Rs: _____________________________
                     (Non- Refundable)
                           (TECHNICAL & FINANCIAL)

TENDER FORM NO._____________

Issued to M/S _____________________________________________________________

___________________________________________________________________________

Vide Receipt   No._______________________ dated _________________



                                                 EXECUTIVE DISTRICT OFFICER
                                                  (EDUCATION) & MEMBER OF
                                                     DISTRICT PURCHASE
                                                   COMMITTEE MIRPURKHAS.


       T E N D E R F O R M.

Tender form for supply of furniture / Science / Machinery equipments / ADP / Non-ADP /
2008-09 of District Mirpurkhas for Elementary / Secondary & Higher Secondary.

Amount Allocated Rs: ___________

Earnest Money (Registered Firm) at the Rate of Rs: 2 ½ % of Rs: ________________

Earnest Money (Un-Registered Firm) at the Rate of Rs: 12 ½ % of Rs: ________________

In purchase of the E.D.O Education, Mirpurkhas Gallop Tender Notice.


                I, __________________________________________ on behalf of

M/S _____________________________________________, along- with the Specification
& description of material / articles.




                                                          SIGNATURE & SEALED / STAMP
                                                                 OF THE FIRM.
NB. OVER WRITING NOT PERMISSIONABLE.

               I declare that the prices quoted above for each articles for furniture /
equipments are inclusive of all the Taxes, Conveyance, Transportation, Polishing,
Netting, Branding, Packing and other incidental charges the breakage and repair
charges paid / born by me.
               Copy of Receipt challan No: …….. Dated:- ……………. Call Deposit /
Pay order No: ___________ dated:- ___________ for Rs: __________ (Rupees
______________
_________________________) Deposited is enclosed with fresh GIR Certificate
valid up to 30-06-2009 issued by the Income Tax Department under who are my
shop / mart / firm is registered and functioning.

I further agree and under take:-

1. That morally and legally I and my firm jointly and separately are bound by the
rates given by me for a period till the 30th June 2009.

2. That earnest money deposited will remain with the Government Treasury for a
period till the orders of the above named Officer are passed on the acceptance or
rejection of the Tender the earnest money / deposit will remain up to the end of the
contract.

3. That the Chairman, DPC Mirpurkhas and Reserves the rights to decrease or
increase. The number of any items (s) mentioned in the tender or enhance / reduce
the amount of allotment mentioned above or split up to tender while placing order.

4. That I shall supply any number of or all furniture articles/other store mentioned in
the tender made of required Gauge and free of any defects and I shall give safe
delivery on my own risks and cost at places of destination of the Institution of
Mirpurkhas District.

5. The supply will be made up to 30th June 2009 in case of failure to supply the
articles of furniture on or before the above due date the committee has right to
impose a fine at the rate of 2% per month of the value of contract from the date of
default to the date of call final inspection and in case the DPC is satisfied that the
tenderer not in a position to supply the material it can forfeit the E/M or S/D as the
case may be and place order with the next lowest firm.

6. That the furniture / other store will be inspected by the purchase committee
Mirpurkhas and the quality of wood used in the manufacturing of furniture before
polishing will be certified by the wood work instructor / D.F.O. which ever is available
at time of inspection.

7. That I perfectly understand the above conditions and those on the draft agreement
seen by me /shown to me and I hereby bound my self to abide by them and set my
hands in token of full agreement of the above.

8. That I shall execute the agreement with in three days from date of opening of
tender and submit the same along with tender’s security deposit at the prescribed
rate else the authority has right to forfeit the E/M giving notice of one week if I failed
to submit the above Tow documents.

                                                       SIGNATURE OF THE TENDER
                                                           WITH FULL ADDRESS.
                                                      EDO (EDUCATION) MIRPURKHAS
                                                                DISTRICT.
OFFICE OF THE EXECUTIVE DISTRICT OFFICER (EDUCATION) DISTRICT
MIRPURKHAS. TERMS AND CONDITIONS FOR PURCHASE OF FURNITURE
ARTICLES    (WOODEN     AND    STEEL,  EQUIPMENT/COMPUTER/MACHINARY
EQUIPMENT & OTHER STORE UNDER THE ADP / NON-ADP 2008-09 OF EXISTING
OFFICES / ELEMENTARY / SEC: & HSS SCHOOLS OF MIRPURKHAS DISTRICT.

  1. The item-wise rates are to be quoted both in figures and words clearly in the
      tender form.
  2. The rates containing over writing will not be accepted.
  3. The conditional tender shall not be accepted.
  4. The rates will be approved by the purchase committee in case of each item on
      the basis of the lowest rates after verification and approval of samples. The
      samples will be approved by the sample approving committee appointed by
      the purchase committee.
  5. The earnest money at the rate of Rs:2 ½ % of the total amount of the tender
      as mentioned in the tender form should be deposited by all the contractors
      (viz: Registered and un-registered 12.50%) in Government Treasury / State
      Bank of Pakistan / scheduled Bank of Pakistan in the name of Executive
      District Officer (EDUCATION) Mirpurkhas. The original copy of challan / call
      deposit voucher should be attached with tender, without which the tender will
      not be accepted. The earnest money in the shape of cheques/cash is not
      accepted.
  6. The attested photo state copy of the latest G.I.R Certificate, for the year 2008-
      2009 should be attached.
  7. Successful Tenderer will have to deposit the security deposit at the rate of 2
      ½ % in case of un-registered contractor of total amount of work order in the
      name of EDO (EDUCATION) before getting supply order. The amount of
      earnest money (2 1/2%) already deposited at the time of submission of
      tender, will be adjusted towards Security Deposit. (The revise rate of security
      deposit 10 % will be deposited as per work order).
  8. The security deposit will remain with the Government till the completion of
      supply and will be refunded after 120-days from the date of final payment, or
      as the case may be, for which no interest will be paid.
  9. That all items will be inspected by the inspection/ committee , before delivery
      at the workshop of the contractor, if any item is found defective /not up to the
      mark, at the time of inspection and or deliver, the same will be changed and
      or re-placed by the tenderer at his own risk and cost. All packing, forwarding
      charge, freight, and octari etc charges up to the destination of consignee /
      consignees will be born by the tendered.
  10. In case of wooden furniture /supply of material, if the District Forest
      Officer/Range Forest Officer does not inspect the furniture of raw material at
      the time of inspection, the wood quality certificate will have to be obtained by
      the tenderer from the Divisional Forest Officer/ competent, authority, without
      which the payment will not be released.
  11. The supplies are to be made to the destination shown in the form in safe and
      sound condition.
  12. The income tax at the rate of 3.5 % of the total amount of business during the
      year will be deducted and deposit on behalf of the tenderer. Such certificate
      will be issued to the contractor in lieu thereof. The contractor will provide sales
      tax invoice all the thing of getting payment, which is mandatory.

  13. In case the tenderer fails to present samples for approval on the scheduled
      date/ makes delay to receive the work order and fails to execute, agreement
      bond with in stipulated time, the earnest money already deposited at the rate
      of 2 ½ % for each tender, will be forfeited to the Government.
  14. In case the tenderer fails to supply the items so ordered, the security
      deposit will be forfeited to the Government and the store can be purchased at
      the risk and cost of the tenderer (Contractor) and or any further action as in
    deemed fit can be taken including black listing of the firm in Education
    Department of Mirpurkhas District.
15. The tenderer (Contractor) has to complete the supplied with in the specified
    period, as will be mentioned in supply order / work order (in case of all
    supplied) or even earlier if he can arrange to do so. In case the contractor fail
    to supply the items so ordered with in the stipulated time as mentioned the
    supply order/work order, penalty will be charged up to the date of inspection
    call, letter in submitted by the contractor at the rate of 2 % per month for un-
    supplied stores. For the purpose of penalty even the broken part of the month
    or days will be counted as full month. The Chairman DPC, Mirpurkhas, also
    reserves he right to cancel such supply work order or part thereof, at the risk
    and cost of the tenderer.
16. The tenderer (contractor) shall have to deliver the furniture/ equipment /
    material destinations within period of 15-day from the date of inspection in
    case of failure to do so 2% penalty will be charged for the late delivery period.
    Here too, the broken portion of month will be counted as full month for the
    purpose of imposing the penalty, as indicated above under condition No.15.
17. The Chairman DPC, Mirpurkhas, also reserve the right to extend the date of
    supply period under the most un-avoidable circumstances with or without
    penalty on the written request of the tenderer but this extension would not be
    granted as routine to every one
18. The contactor will have to complete the entire supply or all the furniture/
    equipments articles and other stores with in two or three in installments the
    stipulated period failing which the supply order for the remaining unsupplied
    furniture articles / stores / equipment will be cancelled the security deposit at
    the rate of Rs.2 ½ % as the case may be for un supplied articles will be
    forfeited to the Government and the furniture articles / stores which will remain
    un supplied will be purchased from the local market at the risk and cost of the
    contractor and the firm will be black listed in the Education Department of
    Mirpurkhas.
19. The part payment for only two times for item supplied / accepted will be made
    against the inspection memo and the receipt of the consignee or his
    authorized officer to the effect that the stores have reached the destination in
    safe and sound condition.
20. The purchase committee reserves the rights to accept / reject whole or any
    part of the tender, without assigning any reason.
21. The Chairman DPC, Mirpurkhas reserve the rights to delete any item for
    purchase and or decrease increase the quantity of purchase of any item
    without assigning any reason.
22. In case of any dispute on any point, the decision of the chairman purchase
    committee Chairman DPC, Mirpurkhas final and legal binding on the
    contractor.
23. In the event of default, on the part of the contractor in the compliance of any
    of the conditions of the contractor and in case of any dispute, it shall be the
    discretion of the Chairman DPC, Mirpurkhas to forfeit full or part of earnest
    money / Security deposit and or cancel the whole or part of supply order,
    placed with the tenderer (contractor) and bring the firm on black list of the
    Education Department of District for ever or some period and that the decision
    of the Chairman DPC, Mirpurkhas in this behalf will be final legal binding on
    the tenderer.
24. In case there is any change in specification / dimension / material finish of any
    article / item of purchase detected by the inspection committee they reserve
    the right separately or collegetively to reject it summarily without assigning
    any reason. The contractor / supplier will, there after, have no right /
    justification to go on ressing acceptance of such articles or item on the plea
    that there is a minor change and its rejection will put him to a financial loss.
25. Minimum 5-year of experience in manufacturing similar type of furniture for
    which invitation to bids issued is compulsory, documentary proved be
    attached with tender form.
26. Registered name bidder.
27. Proof of financial soundness duly authenticated from any commercial Bank.
    Be attached.
28. National Tax Number and Clearance Certificate of the Income Tax
    Department for the last 3-years along with income tax return must be
    provided.
29. G.S.T Registration Certificate as manufacture is attached.
30. Sales Tax return for the current financial year is attached.
31. ISO Certificates.
32. Registration Certificate from industries Department as manufacture in the
    relevant organization.
33. Under taking by the bidder that his firm is or was not black listed / Defaulter in
    any Government Organization.
34. Proof that the firm has its owns work shop / production unit, duly
    authenticated by the competent authority.
35. Photo-graphic Proof that the firm has its owns work shop / production unit,
    duly authenticated by the competent authority.
36. List of Qualified / Certified support team of professional.
37. Audited Financial Statements of 5 Years.
38. 1 year Annual Tax Returns.
39. Relevant Experience.
40. The tenderer will have to abide by the above terms and conditions and the
    successful tenderer will have to execute and agreement bound to this effect
    on Rs:100/- (Rupees one hundred only) judicial paper with the EDO
    (Education) Mirpurkhas on receipt of such intimation without which the order
    will either not be issued or if issued will be liable to cancellation at any time.
41. Stamp duty rate 0.20 paisa per hundred rupees as per approved of the
    Government: under article 15-A of the stamp act 1899 will be deposited by the
    Supplier / Dealer.
42. Professional tax as per approved rates levied by the Govt: will be deducted
    from the Dealers / Suppliers.
43. Service charges as per approved rate 0.25% will be deposited through
    challan.
Note:-READ CAREFULLY .
BEFORE FILLING UP TO TENDER DOCUMENT AND CLOSING OF ENVELOPS.

       The contractor / Supplies are required to submit a single package of their bid
containing two envelops, for Technical and Financial Proposals separately, each
envelops must clearly marked as “Technical Proposal” and “Financial Proposal” in
bold and legible letter to avoid confusion.


    Enclose full Specification in Technical Envelop on Tender / your letter head with
     stamp & signature.
    Put stamp & Signature at each paper including on the Technical Envelop and
     Financial Envelop.

    Enclosed all the Broachers etc in the Technical Envelop.

    Enclose at least one paper (Specification) of Tender in the Technical Envelop.

    Enclose photo copy Demand Draft of earnest money in the Technical
     Envelop.

    The Rate / Cost must be quoted including all taxes.




                                                 EXECUTIVE DISTRICT OFFICER,
                                                  (EDUCATION), MIRPURKHAS

				
DOCUMENT INFO