MackCHN613Specs

Document Sample
MackCHN613Specs Powered By Docstoc
					                                                                    IFB #05-01-01




                    Spotsylvania County Specification For
                      2005 Mack ChN613 Road Tractor
                                July 30, 2004

VEHICLE TYPE, TRACTOR FOR 5 TH WHEEL
VEHICLE USE & BODY/TRAILER TYPE, DUMP TRAILER
TYPE OF SERVICE MUNICIPAL

BVS/FRT AXLE POS/WHEELBASE/PLATFORM
 CHASSIS (BASE MODEL) CHN613 6-WHEEL TRACTOR
 FRONT AXLE FORWARD POSITION
 FRAME RAILS, 10.47” x 3.54”x .32” (266 x 90 x 8mm) STEEL Section
   Modulus 15.0 cu in/RBM 1,810,000 in lbs per rail.
   WHEELBASE, 201” (5095mm) WB 117” CA (2972mm)
 PLATFORM, 173” LP ( mm) 56” AF ( mm) USED WITH 201” WB

ENGINE/TRANSMISSION/CLUTCH

 ENGINE, MACK AC-427-CEGR 427 HP@ 1800 RPM 1560 LB FT. MAX.
   TORQUE @ 1200 RPM
 TRANSMISSION, 10 SPEED MANUAL (OVERDRIVE), FULLER
   FRO-16210C (12.69/0.74)
 CLUTCH, SELF ADJUSTING, EATON/FULLER “SOLO” CL(S) 7983S 15.5”
   TWO-PLATE WITH DAMPENED CERAMIC FULL COAX 9-SPRING,
   6-PADDLE DRIVEN DISC AND 2.0” DIAMETER SPLINE (1700# TORQUE
  CAPACITY)

ENGINE EQUIPMENT

 AIR COMPRESSOR, MERITOR/WABCO 318 18.7 CFM
 AIR CLEANER, 11” X 30”(279 mm x 762 mm) UNDER HOOD SINGLE
  ELEMENT DRY TYPE W/AIR INTAKE FORM BOTH SIDES OF HOOD
 AIR GOVERNOR – CHASSIS MOUNTED
 ALTERNATOR. DELCO 12V 100A (22SI)
 BATTERIES, (3) BULLDOG 12V M/F GROUP 31 660/1980 CCA
   THREADED STUD TYPE W/KALAS CABLES
 BUG SCREEN, BLACK ALUMINUM MOUNTED BEHIND GRILLE
 MACK COOLANT CONDITIONER
 COOLANT PROTECTION TO –10 DEGREES FAHRENHEIT
 ENGINE BRAKE, MACK POWERLEASH




                                             1
                                                               IFB #05-01-01


                           2005 Mack ChN613 Road Tractor


EXHAUST, SINGLE VERTICAL EXHAUST W/CURVED STACK
 DUAL BRIGHT FINISH VERTICAL EXHAUST (INCLUDES HEAT SHIELDS,
   LOWER ELBOWS, AND STACK)
 HEAT SHIELDS (BRIGHT FINISH) FOR MUFFLER
 POLY-V FAN BELT WITH AUTOMATIC TENSIONER
 FAN DRIVE, BEHR FAN WITH BEHR ELECTRONICALLY MODULATED FAN DRIVE
FLYWHEEL HOUSING, ALUMINUM
HAND PRIMER PUMP
INJECTION PUMP – ELECTRONIC ENGINE CONTROL
RADIATOR, ALUMINUM CORE
STARTER, 12 VOLT GEAR REDUCTION STARTER


TRANSMISSION EQUIPMENT/DRIVELINES

 CLUTCH RELEASE HOSE, CLUTCH RELEASE LUBE HOSE
 TRANS OIL COOLER (INTEGRAL OIL PUMP)
 SYNTHETIC LUBRICANT – TRANSMISSION, 50W (HENKEL BRAND)

 DRIVELINE – MAIN, DANA-SPICER 1760 W/COATED SPLINES
 DRIVELINE – INTERAXLE, DANA-SPICER 1710 HD W/COATED SPLINES

CAB

 MACK INTEGRAL W/HEATER (COMBO HEATER/AIR CONDITIONER
   UNIT) W/ 134a REFRIGERANT
 AIR CONDITIONING COMPRESSOR, ROTARY FREON
 AIR RESTRICTION MONITOR (INTAKE), GRADUATED LOCK UP (AIR CLEANER INTAKE MOUNTED)
 CAB, CA65 CONVENTIONAL (WELDED STEEL GALVANIZES SHELL) INCLUDES
   MACK RUST PREVENTIVE PROCEDURES
 TWO (2) DASH MOUNTED ILLUMINATTED SWITCHES
 DOME LIGHT, (1) W/SELF-CONTAINED SWITCH
  ENGINE SHUTOFF, KEY TYPE
 FLOOR COVERING, BLACK RUBBER MATS W/CLOSED CELL VINYL
   NITRILE FOAM BACKING
 GAUGE, AIR PRESSURE, VOLTMETER, ENGINE COOLANT TEMPERATURE, ENGINE OIL PRESSURE,
    AND FUEL LEVEL
 GAUGE CLUSTER, EXHAUST PYROMETER, ENGINE OIL, AND
   TRANSMISSION OIL TEMPERATURE GAUGES
 GAUGES, ENGLISH DISPLAY
 GAUGE, SPEEDOMETER W/TRIP ODOMETER (ELECTRONIC 1% ACCURACY)
 GAUGE, ENGINE TACHOMETER (ELECTRONIC WITH HOURMETER)
 GLASS – CAB WINDOW, SAFETY TINTED WINDSHIELD, SIDE AND REAR WINDOWS
 HEADLAMP BEZEL- MOLDED PLASTIC (BRIGHT FINISH)
 HIGH BEAM INDICATOR LIGHT
 HOOD AND FENDERS, ONE PIECE FIBERGLASS W/WHEEL SPLASH APRONS
 HORN – AIR (2) MACK RECTANGULAR SINGLE TRUMPET
 HORN- ELECTRIC, SINGLE TONE
 IDENTIFICATION/CLEARANCE LIGHTS, (5) GROTE PREMIUM BRIGHT
  FINISH LAMPS
 INSTRUMENT PANEL, WOODGRAIN FINISH AND DRIVER & PASSENGER SIDE
 CUP HOLDERS (HVAC MTD)


                                     2
                                                            IFB #05-01-01


                         2005 Mack ChN613 Road Tractor


INTERIOR TRIM LEVEL, PREMIUM (DESERT SAND) PADDED VINYL HEADLINER
 W/INTEGRAL HEADER CONSOLE, PADDED VINYL DOOR PILLAR POSTS/REAR
 PANEL, POLY-PROPYLENE COVERED FOAM BLACK W/GRAY CARPET INSERT
 DASH PANEL & KICK PANEL COVERING (FIREWALL), PNTD SILVER GRAY
 HEATER & FRESH AIR DUCT COVERING, FLOW THRU HEATER DUCTS, & NON-COVERED
 AREAS PAINTED EXTERIOR COLOR
CHASSIS KEYED AT RANDOM – 2 KEY
LOW AIR PRESSURE INDICATOR LIGHT AND BUZZER
MIRRORS – EXTERIOR, WEST COST, RH & LH BRIGHT FINISH MACK BULLDOG
  HEATED W/STAINLESS STEEL ARMS AND BRACKETS, CONTROL SWITCH/LAMP
 (FOR 96” AND 102” TRAILER WIDTHS)
MIRRORS – CONVEX TYPE, BRIGHT FINISH, LH & RH 7.5” DIA; MOUNTED BELOW
 LOWER ARM OF WEST COAST MIRROR
RADIO / AM-FM CASSETTE (NEGATIVE GROUND) W/AUTO REVERSE,
RADIO ANTENNA, ROOF MOUNTED
RADIO ANTENNA-CB, DUAL FIBERGLASS, MIRROR MTD
DASHBOARD MOUNTING STRAP

 SEAT- DRIVER, BOSTROM TALLADEGA 915 (HI-BACK) AIR SUSPENSION
 SEAT- RIDER, MACK FIXED (MID-BACK) NON SUSPENSION
 SEAT ARM REST, INBOARD MOUNTED ARM REST, DRIVER SEAT ONLY
 SEAT COVERING, VINYL WITH VINYL TRIM RIDER AND DRIVER
  SEAT BELTS, LAP AND SHOULDER W/CAB MOUNTED SHOULDER BELT
  WITH FIXED D-RING FOR DRIVER AND RIDER SEATS
STATER SWITHCH, KEY TYPE
STEERING COLUMN, ADJUSTABLE TILT TELESCOPE
STEERING WHEEL, 18” TWO SPOKE LEATHER WRAPPED (BLACK)
STORAGE ACCESSORIES, PADDED VINYL WITH HEADER STORAGE SHELF WITH DOOR
SUN VISOR, EXTERIOR, FIBERGLASS (PAINTED)
SUN VISOR – INTERIOR, BOTH SIDES (PADDED VINYL) WITH TICKET HOLDER
TURN SIGNALS, FRONT (INTEGRAL WITH FENDER)
WINDSHIELD WASHERS, ELECTRIC, WIPER MOUNTED W/RESERVOIR MOUNTER UNDER HOOD
WINDSHIELD WIPERS, SPRAGUE 2 SPEED ELECTRIC MOTOR W/INTERMITTENT FEATURE

FRAME EQUIPMENT/FUEL TANKS

BUMPER – FRONT STAINLESS STEEL CLAD ALUMINUM FLUSH
  MOUNTED 112.6”/2860 mm BBC (CORPORATE 94”x 15.5”) (INCLUDES
  OPENING FOR FOG/DRIVING LIGHTS)
CROSSMEMBERS, HIGHWAY SEVERE DUTY BOC AND BCL CROSSMEMBERS
BOXED AND TAPPERED CROSSMEMBERS
FIFTH WHEEL AIR SLIDE – LH RELEASE (BOLTED TO OUTBOARD MTG ANGLES)
  FONTAINE SL6AWB SERIES (24” MAXIMUM TRAVEL), BRACKET HEIGHT 7.75”
  COMPATIBLE WITH 49” 5TH WHEEL PLATE, 5/16 x 42 x 43 @ 49 in. HIGH
5TH WHEEL MOUNTING ANGLES, OUTBOARD MOUNTED ANGLES WITH MOUNTING HOLES
FLAPS- WHEEL (FRONT), BLACK POLY ARMOR
TAPPERED RAIL ENDS – 45 DEGREES CUTOFF
TOWING DEVICE – FRONT, (2) CLEVIS
FUEL TANK – LH, 80 GALLON 22” DIAMETER UNPAINTED ALUMINUM
FUEL TANK – RH, 80 GALLON 22” DIAMETER UNPAINTED ALUMINUM
BRIGHT FINISH STAINLESS STEEL STRAPS – FUEL TANK
FRAME MOUNTED DIAMOND PLATE ALUMINUM TOOLBOX, MINIMUM SIZE 3 CU. FT.


                                   3
                                                                      IFB #05-01-01


                              2005 Mack ChN613 Road Tractor


FRONT AXLE/EQUIPMENT/TIRES

 FRONT AXLE, 12000# (5443kg) MACK FXL 12
 TIRES BRAND/TYPE – FRONT, MICHELIN - TUBELESS RADIAL PLY, (2) 11R22.5 14 G XZE-2
  (ALL POSITION)
 WHEELS - FRONT, STEEL DISC (2) 22.5x8.25 10-HOLE HUB PILOTED
 HUBS – FRONT, ALUMINUM
 BRAKES – FRONT, MERITOR “S” CAM TYPE 15” X 4” Q+
 BRAKE DRUMS – FRONT, CAST OUTBOARD MOUNTED
 DUST SHIELDS – FRONT BRAKE, FURNISH
 OIL SEALS – FRONT WHEELS, CHICAGO RAWHIDE (SCOTSEAL)
 SHOCK ABSORBERS, FRONT
 SLACK ADJUSTERS – FRONT, HALDEX – AUTOMATIC
 SPRINGS – FRONT, MACK TAPERLEAF HD12000# (5443kg) GROUND LOAD RATING
 STEERING, M100P SHEPPARD INTEGRAL POWER (18.9:1 RATIO)



REAR AXLE/EQUIPMENT/TIRES RATIOS

 REAR AXLE/SUSPENSION, 38000# (17237kg) MACK S38 ,SS38 MACK
 MULTILEAF (CAMELBACK) 38000# CAPACITY
 TIRES BRAND/TYPE – REAR, MICHELIN – TUBLESS RADIAL PLY, (8) 11R22.5 14 G XDA
  HT (TRACTION)
 CARRIER/RATIO – REAR AXLE, MACK MALLEABLE CRDPC92/CRD93, 4.17 RATIO

WHEELS- REAR, STEEL DISC (10 HOLE), (8) 22.5x8.25 (210 mm) ACCURIDE 10- HOLE HUB PILOTED
 (11 ¼” BOLT CIRCLE) (TWO HAND HOLE)
 HUBS – REAR, ALUMINUM
 BRAKES – REAR, MERITOR “S” CAM 16.5”x7” Q+
 BRAKE DRUM – REAR CAST OUTBOARD MOUNTED
 DUST SHIELDS– REAR BRAKE, FURNISH

 OIL SEALS, CHICAGO RAWHIDE (SCOTSEAL)
 POWER DIVIDER LOCKOUT W/WARNING LIGHT AND BUZZER
  (INCULDES IN CAB MANUAL AIR VALVE)
 SHOCK ABSORBERS – (2) MOUNTED ON FORWARD AXLE EACH SIDE
 SLACK ADJUSTERS – REAR, HALDEX – AUTOMATIC
 SPRINGS, ANTI-SWAY
 SPRING BRAKE CHAMBERS – QUANTITY, (2) DOUBLE DIAPHRAGM TYPE , MECHANICAL SPRING
   RELEASE
 SPRING BRAKE CHAMBERS, TYPE 30/30 REAR
 SYNTHETIC LUBRICANT – REAR AXLE, 75W – 90 (HENKEL BRAND)
 TRANSVERSE TORQUE ROD (REAR AXLE ONLY)
 URETHANE TRUNNION BUSHING

 REAR FENDERS- CUSTOM MADE STAINLESS STEEL RWA FULL FENDERS INCLUDE:
  - HEAVY DUTY, FOR TWO AXLES, CAN BE WALKED ON, TWO YEAR WARRANTY




                                         4
                                                               IFB #05-01-01


                           2005 Mack ChN613 Road Tractor
AIR/BRAKE


AIR DRYER, BENDIX “SYSTEM GUARD” AD-9 HEATED
 AIR RESERVOIRS, ALUMINUM, (2) UNPAINTED
 ANTI-LOCK BRAKE SYSTEM, MERITOR/WABCO WITHOUT AUTOMATIC TRACTION CONTROL
 BRAKE CONTROL VALVE SYSTEM, TWO (2) VALVE DUAL BRAKE SYSTEM –
 TRAILER SUPPLY AND TRACTOR-TRAILER PARK
 MANUAL DRAIN VALVE LANYARD, CONTROL ON SUPPLY (WET) TANK
 HAND CONTROL VALVE FOR TRAILER BRAKES

TRAILER CONNECTIONS, SEMI INCLUDES: (2) 12’AIR HOSE W/GLAD
 HANDS INTEGRAL GLAD HAND (BOC LH) ELECTRICAL PLUG
 HOLDER STORAGE BRACKET, (1) 12’ SEVEN WIRE CORD W/SEVEN
 WIRE PLUG ON EACH END GROUND REACHABLE, BREAKWAY
 SAFETY VALVE, AND CONSPICUITY TREATMENT TO BACK OF CAB
 TRAILER AIR HOSES (12 FT COILED TYPE)
 TRAILER ELECTRICAL CORD (12 FT COILED TYPE)
  TRAILER RECEPTACLE, 7-WIRE MOUNTED ON BACK OF CAB
 TRAILER ACCESS PACKAGE W/GRAB HANDLES, ALUMINUM DECK PLATE, AND ACCESS
 STEP (where applicable) (USABLE CA, 112”-129)
 CAB EQUIPPED WITH AIR CONTROLS FOR AIR OPERATED LIFT AXLES, (TWO), TAILGATE,
 TRAILER DUMP, AND AIR SUSPENSION, FULLY FUNCTIONAL.




ELECTRICAL

 BATTERY BOX - MOUNTING, STEEL BASE
 BATTERY BOX COVERS, POLISHED ALUMINUM
 BATTERY BOX – MOUNTING, FORWARD OF LH FUEL TANK
 WITHOUT DAYTIME RUNING LIGHTS
 DOUBLE TRAILER ELECTRICAL PACKAGE INCLUDES 12 GAUGE WIRE FOR TURN SIGNALS,
   12 GAUGE WIRE AND 20 AMP CIRCUIT W/RELAY FOR CLEARANCE AND MAKER LAMPS,
   10 GAUGE WIRE AND 20 AMP CIRCUIT W/RELAY FOR STOP LAMPS, 12 GAUGE WIRE AND
   20 AMP CIRCUIT W/RELAY FOR TAIL LAMPS, AND 8 GUAGE WIRE FOR GROUND
 ELECTRIC CIRCUIT PROTECTION PACKAGE, 12 VOLT W/CIRCUIT BREAKERS
  (HEADLAMP CIRCUIT: SAE TYPE 1; ALL OTHER CIRCUITS SAE TYPE II) NEGATIVE
  GROUND SYSTEM

FOG LIGHTS, HALOGEN ROUND (BUMPER MOUNTED)
HEADLIGHTS, SINGLE MOUNTED HALOGEN RECTANGULAR LAMPS W/LEXAN LENS, (REPLACEBLE
  BULBS)
REAR LIGHTING, (2) COMBINATION STOP, TAIL DIRECTIONAL AND BACKUP LIGHTS
SIGNAL FLASHER TYPE, TRANSISTORIZED TURN SIGNAL, ACD TRITON
TRAILER HOOK-UP LIGHT, SINGLE (1) BACK OF CAB SEALED BEAM
FLOOD LIGHT WITH IN-CAB PILOT LIGHT

 PAINT/ STRIPING
  PAINT/VINYL STRIPING – CAB EXTERIOR, SINGLE COLOR, WHITE
   (PPG: 90168)




                                      5
                                                                                      IFB #05-01-01



                                    2005 Mack ChN613 Road Tractor

PAINT – CAB, URETHANE BASE COAT W/O CLEAR COAT
 PAINT - CAB INTERIOR, SAME COLOR AS CAB EXTERIOR COLOR
 PAINT – CHASSIS RUNNING GEAR, MACK BLACK (URETHANE)
 PAINT – FRONT SPOKE WHEELS
REAR WHEELS PRE-FINISHED WHITE

VEHICLE ELECTRONICS
 ROAD SPEED LIMIT (RSL) 65mph
 LOWER GEAR ROAD SPEED LIMIT Omit
 LOWER GEAR ROAD SPEED LIMIT (LGRSL) 65mph
 LOWER GEAR ROAD LIMIT TRANS RATION 0.74
 MAXIMUM CRUISE CONTROL SPEED 65 mph
 MIMINUM CRUISE CONTROL SPEED 35mph
 ENGINE BRAKE DELAY IN CRUISE 1246
 ENGINE BRAKE ENGAGEMENT DELAY IN CRUISE 2MPH
 ENGINE BRAKE DISENGAGMENT DELAY IN CRUISE
 INHIBIT CRUISE CONTROL WITH PTO ON Furnish
 CRUISE CONTROL AUTO RESUME Furnish
 GOVERNOR TYPE Min-Max
 HIGH IDLE (max no load) RMP 2100 rpm
 ENGINE OVERSPEED FAULT THRESHOLD 2350 rpm
 LOW IDLE (min no load) RPM 650 rpm
 TAMPER RESISTANCE
 DETECT LOSS OF SIGNAL FROM MPH SENSOR Furnish
 LIMIT POWER IF NO MPH SENSOR SIGNAL Furnish
 LIMIT POWER IF MPH SENSOR ELECTRICAL FAULT Omit
 INCORRECT GEAR RATIO FAULT DETECTION Furnish
 HOLD ELECTRICAL POWER UNTIL VEHICLE STOPS Omit
 ENGINE LOAD THRESHOLD FOR NO MPH SIGNAL FAULT
 FAILED MPH SENSOR ENGINE POWER LIMIT
 HAND THROTTLE CONTROL, ELECTRONIC HAND THROTTLE (EHT)
 ENGINE PROTECTION SYSTEM, ENGINE SHUTDOWN AND
 WARNING W/MANUAL OVERRIDE SWITCH
 COOLANT TEMPERATURE SHUTDOWN Furnish
 OIL PRESSURE SHUTDOWN Furnish

DEALER INFORMATION
 MANUALS, PEDIGREED PROTECTION PLAN TECH, SEVICE MANUAL PROVIDED
    SERVICE & PREP


TRUCK/TRACTOR HYDRAULIC PACKAGE TO OPERATE 41 CU.YD. DUMP/TRAILER

  1.   Operating power shall be provided by the road tractor through a
       transmission mounted AIR SHIFT PTO and wet line kit. The wet line kit is to
       include a hydraulic pump and hydraulic lines fully equipped with a PTO/Pump Combo Unit
       mounted in the floorboard between driver’s seat and door, allowing operation from both inside
       and outside of cab for lifting and lowering of dump bed, opening tailgate, dumping
       suspension air, and activating lift axles. The hydraulic package shall
       also be equipped to permit the operation of a Live Bottom Walking Floor trailer and Lowboy.
       All AIR CONTROLS.



                                                  6
                                                                                        IFB #05-01-01




                                       2005 Mack ChN613 Road Tractor

2.   A PTO for the tractor transmission shall provide the required HP
     for the specified hydraulic pump.

3.   The hydraulic pump,(P-50), shall be gear type rated at 37 GPM,(min), at 1500 RPM

4.   The hydraulic pump shall be capable of 5,000 psi operational pressure

5.   The hydraulic pump shall be direct mounted to P.T.O.

6.   The hydraulic pump shall draw oil from a tractor-mounted reservoir with
     a minimum capacity of 70 U.S gallons. The reservoir shall be filled to the
     the proper level with “FACTO POR 39” or equal hydraulic oil.

7.   The reservoir shall be equipped with:
     a) Filler port.
     b) Filtered breather cap.
     c) A 50 GPM in-line filter
     d) A gate valve on the outlet
     e) Constructed of Aluminum
      f) Mounted upright behind the truck cab

10. Oil shall be carried to the hydraulic cylinder on the trailer through double wire
    braided hydraulic hose. These hoses shall be sufficient in length to reach the
    trailer and they are to be equipped with high pressure Wing fittings
    to mate with fittings on the front wall of the trailer.

11. A spring-loaded support shall be provided to keep hoses from fouling.


12. All hydraulic hoses will be IN-FRAME mounted, (with the exception of the line attached to the trailer)

         All hydraulic hoses and wiring shall be securely clamped at approximately
         18” intervals, shielded exhaust and include a protective sleeve where
         necessary to prevent damage and or failure. All hoses shall have JIC
         swivel connections at each end and located in such a manner as to aid in
         easy component replacement.


STATE INSPECTION INCLUDED

STANDARD SHIPPING INSTURCTION, F.O.B
   SPOTSYLVANIA COUNTY
  DEPARTMENT OF PUBLIC WORKS
  5917 HARRISON ROAD
  FREDERICKSBURG, VA 22407

BULLDOG PROTECTION PLANS
 MINIMUM STATED WARRANTY THREE YEARS OR 300,000 MILES
 STANDARD MACK WARRANTY




                                                      7
    IFB #05-01-01




8

				
Fighting Yank Fighting Yank
About These documents were primarily taken from government websites as part of a personal project to archive political and governmental documents on Docstoc. Please email gov.archive.project@gmail.com for prompt removal if you discover a copyrighted document. Thank you!