14336 Carry out routine inspection and servicing on distribution by malj

VIEWS: 14 PAGES: 5

									                                                                                14336 version 3
                                                                                    Page 1 of 5

Carry out routine inspection and servicing on distribution instrument
transformers below 33kV

Level                              4

Credits                            7

Purpose       People credited with this unit standard are able, for distribution instrument
              transformers below 33kV, to: prepare for routine service; carry out routine
              inspections and diagnostic tests; carry out servicing; record routine
              inspection and servicing; and return equipment to service.


Subfield                           Electricity Supply

Domain                             Electricity Supply - Power System Maintenance

Status                             Registered

Status date                        27 April 1998

Date version published             21 November 2008

Planned review date                31 December 2009

Entry information                  Prerequisites: Unit 14287, Use and maintain test
                                   instruments used within the high voltage electrical
                                   industry; Unit 14700, Apply and remove safety measures
                                   in an electricity supply environment; Unit 14701, Manage
                                   electricity supply work control systems; Unit 12296,
                                   Apply earths to and remove earths from electrical
                                   conductors, plant and equipment; or demonstrate
                                   equivalent knowledge and skills.

Accreditation                      Evaluation of documentation and visit by NZQA and
                                   industry.

Standard setting body (SSB)        Electricity Supply Industry Training Organisation

Accreditation and Moderation Action Plan (AMAP) reference                    0120
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.

Special notes

1   This unit standard can be assessed in a workplace environment, or in a training or
    educational environment if simulated equipment response and examples are able to
    be provided, or in a combination of both environments.




                                                                 New Zealand Qualifications Authority 2010
                                                                                14336 version 3
                                                                                    Page 2 of 5

2     Performance and work practices in relation to the elements and performance criteria
      must comply with all current legislation, especially the Electricity Act 1992, and any
      regulations and codes of practice recognised under that statute; the Health and
      Safety in Employment Act 1992; and the Resource Management Act 1991.
      Electricity supply industry codes of practice and documented industry procedures
      include the Safety Manual – Electricity Industry (SM-EI) (2004) Wellington: Electricity
      Engineers’ Association. A full list of current legislation and industry codes is
      available from the Electricity Supply Industry Training Organisation, PO Box 1245,
      Hamilton 3240.

3     The phrase in accordance with industry requirements is implicit in all elements and
      performance criteria in this unit standard.

4     Industry requirements include all asset owner requirements; manufacturers’
      specifications; and enterprise requirements which cover the documented workplace
      policies, procedures, specifications, business, and quality management requirements
      relevant to the workplace, training or educational environment in which assessment
      is carried out.

5     Core electrical theory is essential knowledge underpinning the performances
      required by this unit standard.

6     The range of this unit standard is limited to carrying out preventative maintenance
      and replacement and/or repairs to distribution instrument transformers below 33kV,
      normally applied at electricity distribution substations.

7     The following terms and abbreviations relate to this unit standard:
      CTs refers to Current transformers
      VTs refers to Voltage transformers.

Elements and performance criteria

Element 1

Prepare for routine service on distribution instrument transformers below 33kV.

Performance criteria

1.1        The scope of work and equipment are identified and selected in accordance
           with servicing procedures.

           Range         may include but is not limited to – associated client or enterprise
                         ‘check and/or inspection lists’ and procedures for – instrument
                         transformers, CTs, VTs.

1.2        The defect history and plant history records are scrutinised for indications of
           servicing needs.

           Range         may include but is not limited to – known defects, operator reports,
                         client special service requests, oil analysis, dissolved gas analysis,
                         thermography tests.



                                                                 New Zealand Qualifications Authority 2010
                                                                               14336 version 3
                                                                                   Page 3 of 5

1.3       The required access permit, or recognised equivalent, is received, checked, and
          signed.

          Range         may include but is not limited to a careful check of the isolations to
                        ensure the access permit, or recognised equivalent, provides a
                        safe work environment.

1.4       All safety measures are in place to eliminate, minimise or control hazards in the
          permit area.

          Range         includes inspection of the safe working zone to ensure the safe
                        work area has been correctly delineated and provides a safe work
                        environment.

1.5       The work party is fully briefed on the equipment to be worked on, work to be
          done, safe working zone and safety features in place, and has signed the
          access permit or its approved equivalent.

          Range         includes the ability to resolve any concerns the work party may
                        have over the isolations and the delineation of the safe work area.
                        All communication with the work party must be clear and
                        unambiguous.

Element 2

Carry out routine inspections and diagnostic tests.

Performance criteria

2.1       People and equipment are resourced for the required work.

          Range         may include but is not limited to – people, tools, spares, materials,
                        ‘inspection sheets’, procedure sheets, diagnostic test equipment.

2.2       Inspection and diagnostic tests are completed in accordance with the selected
          procedures.

          Range         may include but is not limited to – resistance of winding, primary
                        injection test, insulation resistance.

2.3       All diagnostic test results are interpreted and analysed for compliance with
          standard.

          Range         may include but is not limited to results that are outside of
                        enterprise, client or international standards and where corrective
                        action is required. Interpretation of results may include
                        recommendations for servicing action.




                                                                New Zealand Qualifications Authority 2010
                                                                                14336 version 3
                                                                                    Page 4 of 5

Element 3

Carry out servicing.

Performance criteria

3.1       All required servicing is carried out consistent with guidelines and procedures.

          Range         may include but is not limited to the following activities – cleaning
                        ceramic or cast resin bushings, oil replace or top up, terminal
                        connections checked, seismic constraints are secure, special care
                        of hydrophobic surfaces.

3.2       All equipment is reinstated on the instrument transformers.

          Range         may include but is not limited to – all restored equipment is fitted
                        correctly in the proper order and secured ready for service,
                        connections tight and electrically correct, oil levels or gas pressure
                        are to required level.

Element 4

Record routine inspection and servicing.

Performance criteria

4.1       The ‘as left’ conditions are recorded in the plant history or defect history.

          Range         may include but is not limited to – analysis and reporting of any
                        defects, correct completion of the plant history including items
                        replaced.

4.2       The equipment condition status is recorded in accordance with client
          requirements.

          Range         may include but is not limited to – cyclo recorder, number of trial
                        operations noted, pressures and auxiliary service quantified,
                        replacement spares fitted.

Element 5

Return equipment to service.

Performance criteria

5.1       Work party is withdrawn and warned the equipment is no longer safe to work
          on.

          Range         includes notification to the work party to regard the equipment as
                        live when they have signed off.




                                                                 New Zealand Qualifications Authority 2010
                                                                              14336 version 3
                                                                                  Page 5 of 5

5.2       All tools and recipient-applied safety measures are removed in accordance with
          client requirements.

          Range         includes all access devices, for example, work platforms, scaffold,
                        ‘cherry pickers’.

5.3       All equipment worked on is inspected and set for return to service.

          Range         includes – confirming all equipment and the work party are clear,
                        all operational equipment which has been worked on is now set
                        ready for service.

5.4       Return of access permit, or approved equivalent, is confirmed.

          Range         includes confirming all members of the work party have signed off.
                        The equipment is returned to service without incident.

Please note

Providers must be accredited by NZQA, or an inter-institutional body with delegated
authority for quality assurance, before they can report credits from assessment against
unit standards or deliver courses of study leading to that assessment.

Industry Training Organisations must be accredited by NZQA before they can register
credits from assessment against unit standards.

Accredited providers and Industry Training Organisations assessing against unit standards
must engage with the moderation system that applies to those standards.

Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.

Comments on this unit standard

Please contact the Electricity Supply Industry Training Organisation info@esito.org.nz if
you wish to suggest changes to the content of this unit standard.




                                                               New Zealand Qualifications Authority 2010

								
To top