TYPICAL DIMENSIONS_ SPECIFICATIONS AND GRADES AVAILABLE by housework

VIEWS: 686 PAGES: 10

									              DSPC
              TYPICAL DIMENSIONS, SPECIFICATIONS AND GRADES AVAILABLE


                    SAE 1006/1008 COMMERCIAL STEEL

                  ASTM A1011 CS Types A,B and C, ASTM A635 Gr 1008
                  SAE J403 Grade 1006, SAE J403 Grade 1008, SAE J2329 HR1
               C1  Width in (mm)               31.5 (800)   36     (915)   42 (1067)                  48 (1219)      54 (1372)         60 (1524)           63 (1600)
                   Min Nominal Gauge in (mm) 0.049 (1.2)  0.049 (1.2)    0.049 (1.2)                 0.049 (1.2)     0.054 (1.4)       0.060 (1.5)       0.063 (1.6)
                   Max Nominal Gauge in (mm) 0.500 (12.7) 0.500 (12.7)   0.500 (12.7)                0.500 (12.7)    0.500 (12.7)      0.500 (12.7)      0.500 (12.7)
                                                                                                                          maximum width/minimum gauge ratio = 1000:1

                    Manufacturing Tolerances
                     Gauge Range (min) in     Standard Tolerance *                   Available Tolerance **    Notes:
                     0.049 – 0.220        ½ ASTM Tolerance or +0.006 / -0.000   +0.005 / -0.000               * Greater of 1/2 ASTM or stated tolerance. ** Available on
                                                                                                              processed coils with a 100 ton minimum order size.
                          > 0.220         ½ ASTM Tolerance or +0.007 / -0.000   +0.006 / -0.000
DATA SHEETS




                    SAE 1006/1008 DRAWING STEEL

                  ASTM A1011 DS Type B
                  SAE J403 Grade 1006, SAE J403 Grade 1008, SAE J2329 HR2, SAE J2329 HR3
               C1  Width in (mm)               31.5 (800)   36      (915)    42 (1067)  48 (1219)    54 (1372)                         60 (1524)           63 (1600)
                   Min Nominal Gauge in (mm) 0.060 (1.5)  0.060 (1.5)     0.060 (1.5)  0.060 (1.5)  0.068 (1.7)                        0.075 (1.9)       0.079 (2.0)
                   Max Nominal Gauge in (mm) 0.400 (10.2) 0.400 (10.2)    0.400 (10.2) 0.400 (10.2) 0.400 (10.2)                       0.400 (10.2)      0.400 (10.2)
                                                                                                                           maximum width/minimum gauge ratio = 800:1

                    Manufacturing Tolerances
                    Gauge Range (min) in     Standard Tolerance *                    Available Tolerance **    Notes:
                     0.060 – 0.220       ½ ASTM Tolerance or +0.006 / -0.000    +0.005 / -0.000               * Greater of 1/2 ASTM or stated tolerance. ** Available on
                                                                                                              processed coils with a 100 ton minimum order size.
                          > 0.220        ½ ASTM Tolerance or +0.007 / -0.000    +0.006 / -0.000



                    SAE 1010/1017 COMMERCIAL STEEL

                    SAE J403 Grade 1010, SAE J403 Grade 1012, SAE J403 Grade 1015, SAE J403 Grade 1016, SAE J403 Grade 1017
               C2    Width in (mm)              31.5 (800)    36     (915)   42 (1067)   48 (1219)   54 (1372)    60 (1524)      63 (1600)
                     Min Nominal Gauge in (mm) 0.074 (1.8)  0.074 (1.8)    0.074 (1.8)  0.074 (1.8)  0.083 (2.1)  0.092 (2.3)  0.097 (2.5)
                     Max Nominal Gauge in (mm) 0.500 (12.7) 0.500 (12.7)   0.500 (12.7) 0.500 (12.7) 0.500 (12.7) 0.500 (12.7) 0.500 (12.7)
                                                                                                                           maximum width/minimum gauge ratio = 650:1

                    Manufacturing Tolerances
                     Gauge Range (min) in     Standard Tolerance *                   Available Tolerance **    Notes:
                     0.074 – 0.220        ½ ASTM Tolerance or +0.006 / -0.000   +0.005 / -0.000               * Greater of 1/2 ASTM or stated tolerance. ** Available on
                                                                                                              processed coils with a 100 ton minimum order size.
                          > 0.220         ½ ASTM Tolerance or +0.007 / -0.000   +0.006 / -0.000



                    SAE 1018/1022 COMMERCIAL STEEL

                    SAE J403 Grade 1018, SAE J403 Grade 1020, SAE J403 Grade 1021, SAE J403                          Grade 1022
               C3    Width in (mm)              31.5 (800)    36     (915)   42 (1067)   48 (1219)                   54 (1372)    60 (1524)                63 (1600)
                     Min Nominal Gauge in (mm) 0.074 (1.8)  0.074 (1.8)    0.074 (1.8)  0.074 (1.8)                  0.083 (2.1)  0.092 (2.3)            0.097 (2.5)
                     Max Nominal Gauge in (mm) 0.500 (12.7) 0.500 (12.7)   0.500 (12.7) 0.500 (12.7)                 0.500 (12.7) 0.500 (12.7)           0.500 (12.7)
                                                                                                                           maximum width/minimum gauge ratio = 650:1

                    Manufacturing Tolerances
                     Gauge Range (min) in    Standard Tolerance                      Available Tolerance **    Notes:
                     0.074 – 0.220        ½ ASTM Tolerance or +0.006 / -0.000   +0.005 / -0.000               * Greater of 1/2 ASTM or stated tolerance. ** Available on
                          > 0.220         ½ ASTM Tolerance or +0.007 / -0.000   +0.006 / -0.000               processed coils with a 100 ton minimum order size.




              Issued February 2001                                                                                                                         DSPC Page 1
DSPC
TYPICAL DIMENSIONS, SPECIFICATIONS AND GRADES AVAILABLE


      SAE 1025/1035 COMMERCIAL STEEL


      SAE J403 Grade 1026, SAE J403 Grade 1030, SAE J403 Grade 1035
 C4    Width in (mm)               31.5 (800)    36     (915)    42 (1067)   48 (1219)                        54 (1372)         60 (1524)           63 (1600)
       Min Nominal Gauge in (mm) 0.087 (2.2)  0.087 (2.2)     0.087 (2.2)  0.087 (2.2)                       0.090 (2.3)       0.100 (2.5)       0.105 (2.7)
       Max Nominal Gauge in (mm) 0.570 (14.5) 0.570 (14.5)    0.570 (14.5) 0.570 (14.5)                      0.570 (14.5)      0.570 (14.5)      0.570 (14.5)
                                                                                                                     maximum width/minimum gauge ratio = 600

      Manufacturing Tolerances
      Gauge Range (min) in    Standard Tolerance *                          Available Tolerance **     Notes:
       0.087 – 0.220       ½ ASTM Tolerance or +0.007 / -0.000          +0.006 / -0.000               * Greater of 1/2 ASTM or stated tolerance. ** Available on
                                                                                                      processed coils with a 100 ton minimum order size.
            > 0.220        ½ ASTM Tolerance or +0.008 / -0.000          +0.007 / -0.000


      30-40 ksi (210 - 280 MPa) STRUCTURAL QUALITY STEEL

    CSA G40.21 38W (280W)
    ASTM A1011-SS Grade 36 Type 1 and Type 2, ASTM A907 Grade 3
 S1  Width in (mm)               31.5 (800)   36      (915)    42 (1067)  48 (1219)                           54 (1372)        60 (1524)           63 (1600)
     Min Nominal Gauge in (mm) 0.075 (1.9)  0.075 (1.9)     0.075 (1.9)  0.075 (1.9)                         0.083 (2.1)       0.092 (2.3)       0.097 (2.5)
     Max Nominal Gauge in (mm) 0.500 (12.7) 0.500 (12.7)    0.500 (12.7) 0.500 (12.7)                        0.500 (12.7)      0.500 (12.7)      0.500 (12.7)
                                                                                                                    maximum width/minimum gauge ratio = 650:1

      Manufacturing Tolerances
      Gauge Range (min) in     Standard Tolerance *                          Available Tolerance **    Notes:
                                                                                                       Notes:
      0.075 – 0.220        ½ ASTM Tolerance or +0.006 / -0.000          +0.005 / -0.000               * Greater of 1/2 ASTM or stated tolerance. ** Available on
                                                                                                      processed coils with a 100 ton minimum order size.
           > 0.220         ½ ASTM Tolerance or +0.007 / -0.000          +0.006 / -0.000


      45-50 ksi (315 - 350 MPa) STRUCTURAL QUALITY STEEL

    SAE J1392 050 YHK, CSA G40.21 44W (300W), CSA G40.21 50W (350W)
    ASTM A1011-SS Grade 45, Class 1, ASTM A1011 -SS Grade 50 Class 1, ASTM A935-50 Class 1, CB/V 45, CB/V50
 S2  Width in (mm)               31.5 (800)    36     (915)    42 (1067)   48 (1219)   54 (1372)    60 (1524)      63 (1600)
     Min Nominal Gauge in (mm) 0.075 (1.9)  0.075 (1.9)     0.075 (1.9)  0.080 (2.0)  0.090 (2.3)  0.105 (2.7)  0.111 (2.8)
     Max Nominal Gauge in (mm) 0.500 (12.7) 0.500 (12.7)    0.500 (12.7) 0.500 (12.7) 0.500 (12.7) 0.500 (12.7) 0.500 (12.7)
                                                                                                                maximum width/minimum gauge ratio 650:1 <=47
                                                                                                                                                600:1 >47-54
      Manufacturing Tolerances                                                                                                                  570:1 >54

       Gauge Range (min) in     Standard Tolerance *                         Available Tolerance **    Notes:
       0.075 – 0.220        ½ ASTM Tolerance or +0.007 / -0.000         +0.006 / -0.000               * Greater of 1/2 ASTM or stated tolerance. ** Available on
                                                                                                      processed coils with a 100 ton minimum order size.
            > 0.220         ½ ASTM Tolerance or +0.008 / -0.000         +0.007 / -0.000



      60 ksi (420 MPa) STRUCTURAL QUALITY STEEL

      ASTM A1011-SS Grade 60, Class 1
 S3    Width in (mm)               31.5 (800)            36     (915)        42 (1067)         48 (1219)      54 (1372)         60 (1524)           63 (1600)
       Min Nominal Gauge in (mm) 0.150 (3.8)          0.150 (3.8)         0.150 (3.8)        0.150 (3.8)     0.150 (3.8)       0.150 (3.8)       0.150 (3.8)
       Max Nominal Gauge in (mm) 0.250 (6.35)         0.250 (6.35)        0.250 (6.35)       0.250 (6.35)    0.250 (6.35)      0.250 (6.35)      0.250 (6.35)
                                                                                                                maximum width/minimum gauge ratio 600:1 <=47
                                                                                                                                                550:1 >47-54
                                                                                                                                                520:1 >54
      Manufacturing Tolerances
       Gauge Range (min) in     Standard Tolerance*                          Available Tolerance **    Notes:
       0.075 – 0.220        ½ ASTM Tolerance or +0.007 / -0.000         +0.006 / -0.000               * Greater of 1/2 ASTM or stated tolerance. ** Available on
                                                                                                      processed coils with a 100 ton minimum order size.
            > 0.220         ½ ASTM Tolerance or +0.008 / -0.000         +0.007 / -0.000


Issued February 2001                                                                                                                               DSPC Page 2
DSPC
TYPICAL DIMENSIONS, SPECIFICATIONS AND GRADES AVAILABLE


     40 ksi (280 MPa) FORMABLE STEEL

    ALGOFORM 40
    SAE J1392 040 XLF, SAE J1392 040 XLK
 F1  Width in (mm)               31.5 (800)   36     (915)                42 (1067)          48 (1219)           54 (1372)       60 (1524)         63 (1600)
     Min Nominal Gauge in (mm) 0.070 (1.8)  0.070 (1.8)                 0.070 (1.8)         0.070 (1.8)          0.070 (1.8)    0.075 (1.9)      0.079 (2.0)
     Max Nominal Gauge in (mm) 0.500 (12.7) 0.500 (12.7)                0.500 (12.7)        0.500 (12.7)         0.500 (12.7)   0.500 (12.7)     0.500 (12.7)
                                                                                                                      maximum width/minimum gauge ratio = 800:1

     Manufacturing Tolerances
     Gauge Range (min) in     Standard Tolerance *                         Available Tolerance **      Notes:
      0.150 – 0.220       ½ ASTM Tolerance or +0.007 / -0.000         +0.006 / -0.000                 * Greater of 1/2 ASTM or stated tolerance. ** Available on
                                                                                                      processed coils with a 100 ton minimum order size.
           > 0.220        ½ ASTM Tolerance or +0.008 / -0.000         +0.007 / -0.000


     50 ksi (350 MPa) FORMABLE STEEL

    ALGOFORM 50, ASTM A1011 HSLAS-F Grade 50
    ASTM A936-50, SAE J1392 050 XLF, SAE J1392 050 XLK
 F2  Width in (mm)              31.5 (800)  36     (915)    42 (1067)                        48 (1219)            54 (1372)     60 (1524)          63 (1600)
     Min Nominal Gauge in (mm) 0.070 (1.8) 0.070 (1.8)   0.070 (1.8)                        0.077 (1.9)          0.087 (2.2)    0.097 (2.5       0.102 (2.6)
     Max Nominal Gauge in (mm) 0.375 (9.5) 0.375 (9.5)   0.375 (9.5)                        0.375 (9.5)          0.375 (9.5)    0.375 (9.5)      0.375 (9.5)
                                                                                                                        maximum width/minimum gauge ratio 620:1

      Manufacturing Tolerances
      Gauge Range (min) in     Standard Tolerance *                        Available Tolerance **      Notes:
       0.070 – 0.220       ½ ASTM Tolerance or +0.006 / -0.000        +0.005 / -0.000                 * Greater of 1/2 ASTM or stated tolerance. ** Available on
                                                                                                      processed coils with a 100 ton minimum order size.
            > 0.220        ½ ASTM Tolerance or +0.007 / -0.000        +0.006 / -0.000


     60 ksi (420 MPa) FORMABLE STEEL

    ALGOFORM 60, ASTM A1011 HSLAS-F Grade 60
    ASTM A936-60, SAE J1392 060 XLF, SAE J1392 060 XLK
 F3  Width in (mm)               31.5 (800)   36    (915)   42 (1067)                        48 (1219)           54 (1372)      60 (1524)          63 (1600)
     Min Nominal Gauge in (mm) 0.074 (1.9)  0.074 (1.9)   0.074 (1.9)                       0.080 (2.0)          0.090 (2.3)    0.100 (2.54)     0.105 (2.7)
     Max Nominal Gauge in (mm) 0.235 (6.0)  0.235 (6.0)   0.235 (6.0)                       0.235 (6.0)          0.235 (6.0)    0.235 (6.0)      0.235 (6.0)
                                                                                                                        maximum width/minimum gauge ratio 600:1

     Manufacturing Tolerances
      Gauge Range (min) in     Standard Tolerance *                        Available Tolerance **      Notes:
                                                                                                       Notes:
      0.074 – 0.220        ½ ASTM Tolerance or +0.007 / -0.000        +0.006 / -0.000                 * Greater of 1/2 ASTM or stated tolerance. ** Available on
                                                                                                      processed coils with a 100 ton minimum order size.
           > 0.220         ½ ASTM Tolerance or +0.006 / -0.000        +0.007 / -0.000




      Width in (mm)                         31.5   (800)         36     (915)          42    (1067)         48      (1219)      54    (1372)        60   (1524)    63
      (1600)




       Gauge Range (min) in               Standard Tolerance                        Available Tolerance *




Issued February 2001                                                                                                                               DSPC Page 3
106” MILL
TYPICAL DIMENSIONS, SPECIFICATIONS AND GRADES AVAILABLE


     SAE 1006/1008 COMMERCIAL STEEL

    ASTM A569 CS Type B, ASTM A635 Gr 1008
    SAE J403 Grade 1006, SAE J403 Grade 1008, SAE J2329 HR1
 C1  Width in (mm)             28 (712)     36     (915)  48 (1220)                                   60 (1524)           72 (1830)        84 (2134)         96 (2440)
     Min Nominal Gauge in (mm) 0.059 (1.5)  0.059 (1.6)  0.060 (1.6)                                  0.075 (1.9)         0.090 (2.3)      0.105 (2.7)       0.120 (3.1)
     Max Nominal Gauge in (mm) 0.500 (12.7) 0.500 (12.7) 0.500 (12.7)                                 0.500 (12.7)        0.500 (12.7) *   0.500 (12.7) *    0.500 (12.7) *
     * Maximum coil width is 60” ME or SE for nominal gauge thicknesses > 0.437”                                                 maximum width/minimum gauge ratio = 800

     Panel Stock and Exposed Applications
      Width in (mm)             28 (712)                     36    (915)           48 (1220)          60 (1524)           72 (1830)        84 (2134)         96 (2440)
      Min Nominal Gauge in (mm) 0.079 (2.0)                  0.079 (2.0)          0.079 (2.0)         0.100 (2.5)         0.120 (3.0)      0.140 (3.5)       0.160 (4.1)
      Max Nominal Gauge in (mm) 0.170 (4.3)                  0.170 (4.3)          0.170 (4.3)         0.170 (4.3)         0.170 (4.3)      0.170 (4.3)       0.170 (4.3)
                                                                                                                                 maximum width/minimum gauge ratio = 600

     Manufacturing Tolerances
      Gauge Range (min) in                     Standard Tolerance            Available Tolerance in *            Notes:
      0.054 – 0.075                           ¾ ASTM Tolerance         +0.007 / -0.000                          * Tolerance is only available on processed coils with a
                                                                                                                  minimum 180 ton order size.
      0.075 – 0.220                           ¾ ASTM Tolerance         ½ ASTM Tolerance **
           > 0.220                            ¾ ASTM Tolerance         ½ ASTM Tolerance                         ** 1/2 ASTM Tolerance but not less than +0.007” / - 0.000”




     SAE 1006/1008 DRAWING STEEL

   ASTM A622 DS Type B, ASTM A635 Gr 1008
   SAE J403 Grade 1006, SAE J403 Grade 1008, SAE J2329 HR2
 C1 Width in (mm)             28 (712)    36    (915)  48 (1220)                                      60 (1524)           72 (1830)        80 * (2032)        96 (2440)
    Min Nominal Gauge in (mm) 0.074 (1.9) 0.074 (1.9) 0.077 (1.95)                                    0.095 (2.4)         0.114 (2.9)      0.127 (3.2)            -
    Max Nominal Gauge in (mm) 0.430 (11)  0.430 (11)  0.430 (11)                                      0.430 (11)          0.430 (11)       0.430 (11)             -
     * Maximum slit edge coil width is 78”, maximum mill edge coil width is 80”                                                   maximum width/minimum gauge ratio = 630

     Manufacturing Tolerances
      Gauge Range (min) in                      Standard Tolerance         Available Tolerance in *              Notes:
      0.070 – 0.220                           ¾ ASTM Tolerance         ½ ASTM Tolerance **                     * Tolerance is only available on processed coils with a
                                                                                                                 minimum 180 ton order size.
            > 0.220                           ¾ ASTM Tolerance         ½ ASTM Tolerance
                                                                                                               ** 1/2 ASTM Tolerance but not less than +0.007” / - 0.000”




     SAE 1010/1017 COMMERCIAL STEEL

    SAE J403 Grade 1010 SAE J403 Grade 1012, SAE J403 Grade 1015, SAE J403 Grade
    1016, SAE J403 Grade 1017, ASTM A635 Gr 1010, ASTM A635 Gr 1012, ASTM A635
    Gr 1016, ASTM A635 Gr 1017
 C2  Width in (mm)              28 (712)     36    (915)  48 (1220)   60 (1524)    72 (1830)                                                84 (2134)        96 (2440)
     Min Nominal Gauge in (mm) 0.070 (1.8)  0.070 (1.8)  0.070 (1.8)  0.075 (1.9)  0.090 (2.3)                                             0.105 (2.7)       0.120 (3.0)
     Max Nominal Gauge in (mm) 0.500 (12.7) 0.500 (12.7) 0.500 (12.7) 0.500 (12.7) 0.500 (12.7) *                                          0.500 (12.7) *    0.500 (12.7) *
     * Maximum coil width is 60” ME or SE for nominal gauge thicknesses > 0.437”                                                  maximum width/minimum gauge ratio = 800

     Manufacturing Tolerances
     Gauge Range (min) in                      Standard Tolerance          Available Tolerance *                 Notes:
      0.066 – 0.075                           ¾ ASTM Tolerance         +0.007 / -0.000                          * Tolerance is only available on processed coils with a
                                                                                                                  minimum 180 ton order size.
      0.075 – 0.220                           ¾ ASTM Tolerance         ½ ASTM Tolerance **
           > 0.220                            ¾ ASTM Tolerance         ½ ASTM Tolerance                         ** 1/2 ASTM Tolerance but not less than +0.007” / - 0.000”




Issued February 2001                                                                                                                                        106” Mill Page 4
106” MILL
TYPICAL DIMENSIONS, SPECIFICATIONS AND GRADES AVAILABLE

      SAE 1010/1017 DRAWING STEEL
      SAE J403 Grade 1009, SAE J403 Grade 1010
 C2    Width in (mm)             28 (712)    36    (915)                            48 (1220)          60 (1524)          72 (1830)        80 * (2032)        96 (2440)
       Min Nominal Gauge in (mm) 0.080 (2.0) 0.080 (2.0)                           0.080 (2.0)         0.100 (2.5)        0.120 (3.0)      0.133 (3.4)            -
       Max Nominal Gauge in (mm) 0.430 (11)  0.430 (11)                            0.430 (11)          0.430 (11)         0.430 (11)       0.430 (11)             -
      * Maximum slit edge coil width is 78”, maximum mill edge coil width is 80”                                                  maximum width/minimum gauge ratio = 600

      Manufacturing Tolerances
       Gauge Range (min) in                      Standard Tolerance        Available Tolerance in *              Notes:
       0.076 – 0.220                           ¾ ASTM Tolerance        ½ ASTM Tolerance **                      * Tolerance is only available on processed coils with a
                                                                                                                  minimum 180 ton order size.
             > 0.220                           ¾ ASTM Tolerance        ½ ASTM Tolerance
                                                                                                                ** 1/2 ASTM Tolerance but no less than +0.007” / - 0.000”




      SAE 1018/1022 COMMERCIAL STEEL

      SAE J403 Grade 1018, SAE J403 Grade 1020, SAE J403                           Grade 1021,     SAE J403 Grade 1022, SAE J403 Grade                      1023
C3     Width in (mm)             28 (712)     36     (915)                          48 (1220)       60 (1524)    72 (1830)      84 (2134)                    96 (2440)
       Min Nominal Gauge in (mm) 0.075 (1.9)  0.075 (1.9)                          0.083 (2.1)      0.103 (2.6)  0.124 (3.1)    0.156 (4.0)                  0.178 (4.5)
       Max Nominal Gauge in (mm) 0.500 (12.7) 0.500 (12.7)                         0.500 (12.7)     0.500 (12.7) 0.500 (12.7) * 0.500 (12.7) *               0.500 (12.7) *
      * Maximum coil width is 60” ME or SE for nominal gauge thicknesses > 0.375”                                    maximum width/minimum gauge ratio = 580 (540 > 72)

      Manufacturing Tolerances
       Gauge Range (min) in                     Standard Tolerance          Available Tolerance in *             Notes:
       0.070 – 0.120                           ¾ ASTM Tolerance         +0.008 / -0.000                         * Tolerance is only available on processed coils with a
                                                                                                                  minimum 180 ton order size.
       0.120 – 0.220                           ¾ ASTM Tolerance         ½ ASTM Tolerance **
            > 0.220                            ¾ ASTM Tolerance         ½ ASTM Tolerance                        ** 1/2 ASTM Tolerance but no less than +0.009” / - 0.000”




      SAE 1025/1035 COMMERCIAL STEEL

      SAE J403 Grade 1025, SAE J403 Grade 1026, SAE J403 Grade 1030,                                   SAE J403 Grade 1035, SAE J403 Grade                   1524
C4     Width in (mm)             28 (712)     36     (915)  48 (1220)                                  60 (1524)    72 (1830)      84 (2134)                 96 (2440)
       Min Nominal Gauge in (mm) 0.075 (1.9)  0.075 (1.9)  0.087 (2.2)                                 0.109 (2.8)  0.131 (3.3)    0.165 (4.2)               0.188 (4.8)
       Max Nominal Gauge in (mm) 0.400 (10.2) 0.400 (10.2) 0.400 (10.2)                                0.400 (10.2) 0.400 (10.2) * 0.400 (10.2) *            0.400 (10.2) *
      * Maximum coil width is 60” ME or SE for nominal gauge thicknesses > 0.313”                                    maximum width/minimum gauge ratio = 550 (510 > 72)

      Manufacturing Tolerances
       Gauge Range (min) in                     Standard Tolerance          Available Tolerance in *             Notes:
       0.070 – 0.120                           ¾ ASTM Tolerance         +0.009 / -0.000                         * Tolerance is only available on processed coils with a
                                                                                                                  minimum 180 ton order size.
       0.120 – 0.220                           ¾ ASTM Tolerance         ½ ASTM Tolerance **
            > 0.220                            ¾ ASTM Tolerance         ½ ASTM Tolerance **                     ** 1/2 ASTM Tolerance but no less than +0.010” / - 0.000”




      30-40 ksi (210 - 280 Mpa) STRUCTURAL QUALITY STEEL
      ASTM A570-30, A570-33, A570-36 Type 1, A570-36 Type 2, A570-40,
      CSA STD G40.21 38W (260W)
S1     Width in (mm)             28 (712)     36     (915)  48 (1220)   60 (1524)                                         72 (1830)        84 (2134)         96 (2440)
       Min Nominal Gauge in (mm) 0.075 (1.9)  0.075 (1.9)  0.077 (2.2)  0.097 (2.8)                                       0.116 (3.3)      0.147 (4.2)       0.168 (4.8)
       Max Nominal Gauge in (mm) 0.438 (11.1) 0.438 (11.1) 0.438 (11.1) 0.438 (11.1)                                      0.438 (11.1) *   0.438 (11.1) *    0.438 (11.1) *
      * Maximum coil width is 60” ME or SE for nominal gauge thicknesses > 0.375”                                    maximum width/minimum gauge ratio = 620 (570 > 72)

      Manufacturing Tolerances
       Gauge Range (min) in                     Standard Tolerance          Available Tolerance in *             Notes:
       0.070 – 0.120                           ¾ ASTM Tolerance         +0.008 / -0.000                         * Tolerance is only available on processed coils with a
                                                                                                                  minimum 180 ton order size.
       0.120 – 0.220                           ¾ ASTM Tolerance         ½ ASTM Tolerance **
            > 0.220                            ¾ ASTM Tolerance         ½ ASTM Tolerance                        ** 1/2 ASTM Tolerance but no less than +0.009” / - 0.000”



Issued February 2001                                                                                                                                        106” Mill Page 5
106” MILL
TYPICAL DIMENSIONS, SPECIFICATIONS AND GRADES AVAILABLE

     45 - 50 ksi (315 - 350 Mpa) STRUCTURAL QUALITY STEEL
    ASTM A607 Gr 45 Class 1, Gr 50 Type 1 Class 1, Gr 50 Type 2 Class 1, SAE J1392 Gr 050 YHK,
    ASTM A935 Gr 50 Class 1, CSA STD G40.21 44W (300W), G40.21 50W (350W)
 S2  Width in (mm)              28 (712)     36    (915)   48 (1220)    60 (1524)   72 (1830)                                           80 * (2032)        96 (2440)
     Min Nominal Gauge in (mm) 0.075 (1.9)   0.075 (1.9)  0.087 (2.2)   0.109 (2.8) 0.131 (3.3)                                         0.168 (4.2)       0.192 (4.8)
     Max Nominal Gauge in (mm) 0.375 (9.5)   0.375 (9.5)  0.375 (9.5)   0.375 (9.5) 0.375 (9.5) *                                       0.375 (9.5) *     0.375 (9.5) *
     * Maximum coil width is 60 ME or SE for nominal gauge thicknesses > 0.313”                                   maximum width/minimum gauge ratio = 550 (500 >72)

     Manufacturing Tolerances
      Gauge Range (min) in                    Standard Tolerance        Available Tolerance in *              Notes:
      0.075 – 0.120                         ¾ ASTM Tolerance        +0.009 / -0.000                          * Tolerance is only available on processed coils with a
                                                                                                               minimum 180 ton order size.
      0.120 – 0.200                         ¾ ASTM Tolerance        ½ ASTM Tolerance **
           > 0.200                          ¾ ASTM Tolerance        ½ ASTM Tolerance **                      ** 1/2 ASTM Tolerance but no less than +0.010” / - 0.000”




     55 - 60 ksi (385 - 420 Mpa) STRUCTURAL QUALITY STEEL

     ASTM A607 Gr 55 Type 1 Class 1, ASTM A607 Gr 60 Type 1 Class 1, CB/V 55, CB/V                                     60
S3    Width in (mm)             28 (712)    36    (915)   48 (1220)   60 (1524)                                        72 (1830)        84   (2134)       96 (2440)
      Min Nominal Gauge in (mm) 0.090 (2.3) 0.090 (2.3)  0.096 (2.4)  0.120 (3.0)                                      0.144 (3.7)            -                -
      Max Nominal Gauge in (mm) 0.220 (5.6) 0.220 (5.6)  0.220 (5.6)  0.220 (5.6)                                      0.220 (5.6)            -                -
     * Maximum coil width is 72” ME or SE                                                                                     maximum width/minimum gauge ratio = 500

     Manufacturing Tolerances
      Gauge Range (min) in                    Standard Tolerance         Available Tolerance in *             Notes:
      0.090 – 0.120                          ¾ ASTM Tolerance        +0.010 / -0.000                         * Tolerance is only available on processed coils with a
                                                                                                               minimum 180 ton order size.
      0.120 – 0.200                          ¾ ASTM Tolerance        ½ ASTM Tolerance **
           > 0.200                           ¾ ASTM Tolerance        ½ ASTM Tolerance **                     ** 1/2 ASTM Tolerance but no less than +0.011” / - 0.000”



     65 - 80 ksi (455 - 560 Mpa) STRUCTURAL QUALITY STEEL

     Please inquire for grades available
S4    Width in (mm)                 28 (712)                36    (915)        48 (1220)            60 (1524)          72   (1830)      84   (2134)       96 (2440)
       Min Nominal Gauge in (mm)   0.100 (2.5)              0.100 (2.5)       0.120 (3.0)           0.150 (3.8)              -                -                -
       Max Nominal Gauge in (mm)   0.180 (4.6)              0.180 (4.6)       0.180 (4.6)           0.180 (4.6)              -                -                -
     * Maximum coil width is 60” ME or SE                                                                                     maximum width/minimum gauge ratio = 400

     Manufacturing Tolerances
      Gauge Range (min) in                    Standard Tolerance         Available Tolerance in *             Notes:
      0.100 – 0.120                          ¾ ASTM Tolerance        +0.011 / -0.000                         * Tolerance is only available on processed coils with a
                                                                                                               minimum 180 ton order size.
      0.120 – 0.180                          ¾ ASTM Tolerance        ½ ASTM Tolerance **
                                                                                                             ** 1/2 ASTM Tolerance but no less than +0.012” / - 0.000”




     40 ksi (280 Mpa) FORMABLE STEEL

     Algoform 40, SAE J1392 Gr 040 XLF, SAE J1392 Gr 040 XLK
F1    Width in (mm)             28 (712)     36    (915)  48 (1220)                                 60 (1524)          72 (1830)        84   (2134)       96 (2440)
      Min Nominal Gauge in (mm) 0.075 (1.9)  0.075 (1.9) 0.077 (2.0)                                0.097 (2.5)        0.116 (2.9)            -                -
      Max Nominal Gauge in (mm) 0.250 (6.4)  0.250 (6.4) 0.250 (6.4)                                0.250 (6.4)        0.250 (6.4)            -                -
     * Maximum coil width is 72” ME or SE                                                                                    maximum width/minimum gauge ratio = 620

     Manufacturing Tolerances
      Gauge Range (min) in                   Standard Tolerance         Available Tolerance in *              Notes:
      0.070 – 0.120                         ¾ ASTM Tolerance        +0.008 / -0.000                          * Tolerance is only available on processed coils with a
                                                                                                               minimum 180 ton order size.
      0.120 – 0.220                         ¾ ASTM Tolerance        ½ ASTM Tolerance **
            > 0.220                         ¾ ASTM Tolerance        ½ ASTM Tolerance                         ** 1/2 ASTM Tolerance but no less than +0.009” / - 0.000”




Issued February 2001                                                                                                                                     106” Mill Page 6
106” MILL
TYPICAL DIMENSIONS, SPECIFICATIONS AND GRADES AVAILABLE

     45 - 50 ksi (315 - 350 Mpa) FORMABLE STEEL
   Algoform 45, Algoform 50, ASTM A936 Gr                    50, ASTM A715 Gr 50, SAE J1392 Gr 340 XLF, SAE J1392 Gr 340 XLK
   SAE J1392 Gr 045 XLF, SAE J1392 Gr 045                    XLK, SAE J1392 Gr 050 XLF, SAE J1392 Gr 050 XLF, SAE J1392 Gr 050 XLK
F2  Width in (mm)              28 (712)                       36    (915)  48 (1220)   60 (1524)   72 (1830)    80 * (2032)  96 (2440)
    Min Nominal Gauge in (mm)  0.075 (1.9)                    0.075 (1.9) 0.087 (2.2)  0.109 (2.8) 0.131 (3.3)        -          -
    Max Nominal Gauge in (mm)  0.250 (6.4)                    0.250 (6.4) 0.250 (6.4)  0.250 (6.4) 0.250 (6.4)        -          -
     * Maximum coil width is 72”, ME or SE                                                                                            maximum width/minimum gauge ratio = 550

     Manufacturing Tolerances
      Gauge Range (min) in                      Standard Tolerance        Available Tolerance in *               Notes:
      0.075 – 0.120                            ¾ ASTM Tolerance       +0.009 / -0.000                           * Tolerance is only available on processed coils with a
                                                                                                                  minimum 180 ton order size.
      0.120 – 0.200                            ¾ ASTM Tolerance       ½ ASTM Tolerance **
            > 0.200                            ¾ ASTM Tolerance       ½ ASTM Tolerance **                       ** 1/2 ASTM Tolerance but no less than +0.010” / - 0.000”




     55 - 60 ksi (385 - 420 Mpa) FORMABLE STEEL
HSLA
    Algoform 55, Algoform 60, SAE J1392 Gr 060XLF, SAE J1392 Gr 060 XLK
  F
F3   Width in (mm)              28 (712)    36  (915)    48 (1220)   60 (1524)                                                72   (1830)      84   (2134)      96 (2440)
       Min Nominal Gauge in (mm)             0.100 (2.5)      0.100 (2.5)       0.100 (2.5)           0.125 (3.2)                   -                -               -
       Max Nominal Gauge in (mm)             0.200 (5.1)      0.200 (5.1)       0.200 (5.1)           0.200 (5.1)                   -                -               -
     * Maximum coil width is 60” ME or SE                                                                                            maximum width/minimum gauge ratio = 480

     Manufacturing Tolerances
      Gauge Range (min) in                      Standard Tolerance        Available Tolerance in *                  Notes:
      0.090 – 0.120                            ¾ ASTM Tolerance       +0.010 / -0.000                           * Tolerance is only available on processed coils with a
                                                                                                                  minimum 180 ton order size.
      0.120 – 0.200                            ¾ ASTM Tolerance       ½ ASTM Tolerance **
                                                                                                                ** 1/2 ASTM Tolerance but no less than +0.011” / - 0.000”



     65 - 80 ksi (455 - 560 Mpa) FORMABLE STEEL

     Please inquire for available grades
F4    Width in (mm)                 28 (712)                  36    (915)        48 (1220)             60 (1524)              72   (1830)      84   (2134)      96 (2440)
       Min Nominal Gauge in (mm)    0.100 (2.5)               0.100 (2.5)       0.120 (3.0)            0.150 (3.8)                  -                -               -
       Max Nominal Gauge in (mm)    0.180 (4.6)               0.180 (4.6)       0.180 (4.6)            0.180 (4.6)                  -                -               -
     * Maximum coil width is 60” ME or SE                                                                                            maximum width/minimum gauge ratio = 400
      Gauge Range (min) in                       Standard Tolerance         Available Tolerance in *
     Manufacturing Tolerances
      Gauge Range (min) in                      Standard Tolerance         Available Tolerance in *              Notes:
      0.100 – 0.120                            ¾ ASTM Tolerance        +0.011 / -0.000                          * Tolerance is only available on processed coils with a
                                                                                                                  minimum 180 ton order size.
      0.120 – 0.180                            ¾ ASTM Tolerance        ½ ASTM Tolerance **
                                                                                                                ** 1/2 ASTM Tolerance but no less than +0.012” / - 0.000”




      SAE 1010/1017 PRESSURE VESSEL QUALITY STEEL

     ASTM A414 A, ASTM A414 C, ASME SA414                     Grade A, ASME SA414 Grade C
C2    Width in (mm)             28 (712)                      36     (915)  48 (1220)   60 (1524)                             72 (1830)        84 (2134)         96 (2440)
      Min Nominal Gauge in (mm) 0.070 (1.8)                   0.070 (1.8)  0.070 (1.8)  0.075 (1.9)                           0.090 (2.3)      0.105 (2.7)       0.120 (3.0)
      Max Nominal Gauge in (mm) 0.500 (12.7)                  0.500 (12.7) 0.500 (12.7) 0.500 (12.7)                          0.500 (12.7) *   0.500 (12.7) *    0.500 (12.7) *
     * Maximum coil width is 60” ME or SE for nominal gauge thicknesses > 0.437”                                                      maximum width/minimum gauge ratio = 800

     Manufacturing Tolerances
      Gauge Range (min) in                      Standard Tolerance         Available Tolerance in *                  Notes:
      0.066 – 0.075                            ¾ ASTM Tolerance        +0.007 / -0.000                          * Tolerance is only available on processed coils with a
                                                                                                                  minimum 180 ton order size.
      0.075 – 0.220                            ¾ ASTM Tolerance        ½ ASTM Tolerance **
           > 0.220                             ¾ ASTM Tolerance        ½ ASTM Tolerance                         ** 1/2 ASTM Tolerance but no less than +0.007” / - 0.000”




Issued February 2001                                                                                                                                            106” Mill Page 7
106” MILL
TYPICAL DIMENSIONS, SPECIFICATIONS AND GRADES AVAILABLE

     SAE 1024/1035 PRESSURE VESSEL QUALITY STEEL

     ASTM A414 F, ASTM A414 G, ASME SA414                  Grade F, ASME SA414 Grade G
C4    Width in (mm)             28 (712)                   36    (915)  48 (1220)   60 (1524)                 72 (1830)       84 (2134)          96 (2440)
      Min Nominal Gauge in (mm) 0.075 (1.9)                0.075 (1.9) 0.087 (2.2) 0.109 (2.8)                0.131 (3.3)     0.165 (4.2)             -
      Max Nominal Gauge in (mm) 0.270 (6.9)                0.270 (6.9) 0.270 (6.9) 0.270 (6.9)                0.270 (6.9) *   0.270 (6.9) *           -
     * Maximum coil width is 60” ME or SE for nominal gauge thicknesses > 0.313”                         maximum width/minimum gauge ratio = 550 (510 >72)

     Manufacturing Tolerances
      Gauge Range (min) in                    Standard Tolerance         Available Tolerance in *    Notes:
       0.070 – 0.120                         ¾ ASTM Tolerance        +0.009 / -0.000                * Tolerance is only available on processed coils with a
                                                                                                      minimum 180 ton order size.
       0.120 – 0.220                         ¾ ASTM Tolerance        ½ ASTM Tolerance **
                                                                                                    ** 1/2 ASTM Tolerance but no less than +0.010” / - 0.000”
            > 0.220                          ¾ ASTM Tolerance        ½ ASTM Tolerance **




Issued February 2001                                                                                                                            106” Mill Page 8
COLD ROLLED
TYPICAL DIMENSIONS, SPECIFICATIONS AND GRADES AVAILABLE


      SAE 1006/1008 COMMERCIAL STEEL

      ASTM A1008 CS Types A, B and C
 C1    Width in (mm)
        Width in (mm)                   30
                                  30 (762) (762)
                                               36 (915)   36         (915) (1067)42 (1067) (1219) 4854 (1219)
                                                                      42            48                    (1372)       54 (1372)
                                                                                                                        60 (1524)        60 (1524)
                                                                                                                                         66 (1676)          7266(1828)
                                                                                                                                                                    (1676)            72
       (1828)
       Min Nominal Gauge in (mm) 0.016 (0.4)  0.016 (0.4)           0.016 (0.4)     0.016 (0.4)     0.018 (0.45)       0.020 (0.51)     0.033 (0.83)       0.036 (0.91)
       Max Nominal Gauge in (mm) 0.121 (3.1)   0.121 (3.1)          0.121 (3.1)      0.121 (3.1)    0.121 (3.1)        0.121 (3.1)        0.121 (3.1)      0.121 (3.1)
                                                                                    maximum width/minimum gauge ratio = 3000:1 to 60” / 2000:1 to max width of 73.5”




      SAE 1006/1008 DRAWING STEEL

      ASTM A1008 DS Types A and B
 C1    Width in (mm)       30 (762)                  36     (915)    42 (1067)         48    (1219)   54     (1372)      60    (1524)     66   (1676)       72 (1828)
       Min Nominal Gauge in (mm)    0.017 (0.43)    0.017 (0.43)    0.017 (0.43)      0.017 (0.43)    0.018 (0.45)     0.020 (0.51)     0.033 (0.83)       0.036 (0.91)
       Max Nominal Gauge in (mm)    0.104 (2.64)    0.104 (2.64)    0.104 (2.64)      0.104 (2.64)    0.104 (2.64)     0.104 (2.64)     0.104 (2.64)       0.104 (2.64)
                                                                                    maximum width/minimum gauge ratio = 3000:1 to 60” / 2000:1 to max width of 73.5”




      SAE 1006/1008 DRAWING STEEL - SEVERE FORMING APPLICATIONS
    ASTM A1008 DS Types A and B
 C1  Width in (mm)             30 (762)             36 (915)          42 (1067)       48 (1219)       54 (1372)         60 (1524)       66 (1676)           72 (1828)
     Min Nominal Gauge in (mm) 0.017 (0.43)         0.017 (0.43)    0.017 (0.43)      0.017 (0.43)    0.018 (0.45)     0.020 (0.51)      0.033 (0.83)      0.036 (0.91)
     Max Nominal Gauge in (mm) 0.085 (2.15)          0.085 (2.15)    0.085 (2.15)      0.085 (2.15)    0.085 (2.15)    0.085 (2.15)      0.085 (2.15)      0.085 (2.15)
                                                                                    maximum width/minimum gauge ratio = 3000:1 to 60” / 2000:1 to max width of 73.5”




      SAE 1010/1017 COMMERCIAL STEEL

      SAE J403 Grades 1010, 1012, 1015, 1016, 1017
 C2    Width in (mm)         30 (762)   36 (915)   42 (1067)                          48    (1219)    54    (1372)       60    (1524)    66    (1676)       72 (1828)
        Min Nominal Gauge in (mm)   0.016 (0.4)      0.016 (0.4)    0.016 (0.4)       0.018 (0.45)  0.020 (0.51)        0.022 (0.55)    0.024 (0.61)       0.027 (0.68)
        Max in (mm)
       WidthNominal Gauge in (mm)   0.121 (3.1) 31.5 0.121 (3.1)
                                                       (800)        0.121 (3.1)
                                                                    36      (915)     0.121 42 (1067)
                                                                                             (3.1)  0.121 (3.1)
                                                                                                             48       (1219) (3.1) 54
                                                                                                                        0.121           0.121 (3.1)
                                                                                                                                         (1372)          600.121 (3.1)
                                                                                                                                                              (1524)             63
       (1600)                                                                                                            maximum width/minimum gauge ratio = 2700:1




     Width in (mm)
    SAE 1018/1035 COMMERCIAL STEEL    30 (762)           36 (915)    42 (1067)   48 (1219)                             54     (1372)      62   (1575)          66       (1676)        72
     Width in (mm)
     (1828)                           30 (762)           36 (915)    42 (1067)   48 (1219)                             54     (1372)      60   (1524)          66       (1676)        72
     (1828)                             Standard Tolerance *
     Gauge Range (min) in 1018, 1020, 1022, 1023, 1024, 1025, 1030, Available Tolerance **
    SAE J403 Grades                                                        1035
 C1
 C3  Width in (mm)               30 (762)      36 (915)      42 (1067)  48 (1219) 54 (1372)                              62    (1575)     66   (1676)       72 (1828)
       Min Nominal Gauge in (mm)    0.030 (0.76)    0.030 (0.76)    0.030 (0.76)      0.030 (0.76)    0.032 (0.81)     0.036 (0.91)            -                    -
       Max Nominal Gauge in (mm)    0.064 (1.6)     0.064 (1.6)     0.064 (1.6)       0.064 (1.6)     0.064 (1.6)      0.064 (1.6)             -                    -
                                                                                                                            maximum width/minimum gauge ratio = 1700:1




      40 ksi (280 Mpa) FORMABLE STEEL

      ALGOFORM 40, SAE J1392 040 XLK, SAE J1392 040 XLF
 F1    Width in (mm)       30 (762)   36 (915)   42 (1067)                             48    (1219)   54    (1372)       62    (1575)     66   (1676)       72 (1828)
       Min Nominal Gauge in (mm)    0.030 (0.76)     0.030 (0.76)   0.030 (0.76)      0.030 (0.76)    0.032 (0.81)     0.036 (0.91)            -                    -
       Max Nominal Gauge in (mm)    0.074 (1.88)     0.074 (1.88)   0.074 (1.88)      0.074 (1.88)    0.074 (1.88)     0.074 (1.88)            -                    -
                                                                                                                         maximum width/minimum gauge ratio = 1700:1




Issued February 2001                                                                                                                               Cold Rolled Page 9
COLD ROLLED
TYPICAL DIMENSIONS, SPECIFICATIONS AND GRADES AVAILABLE


       50 ksi (350 Mpa) FORMABLE STEEL

      ALGOFORM 50, SAE J1392 050 XLK, SAE J1392 050 XLF
 F2    Width in (mm)        30 (762)  36 (915)   42 (1067)                                      48     (1219)    54      (1372)      62   (1575)       66   (1676)           72 (1828)
        Min Nominal Gauge in (mm)         0.030 (0.76)     0.030 (0.76)        0.030 (0.76)    0.030 (0.76)     0.032 (0.81)       0.036 (0.91)             -                  -
        Max Nominal Gauge in (mm)         0.064 (1.6)      0.064 (1.6)         0.064 (1.6)     0.064 (1.6)      0.064 (1.6)        0.064 (1.6)              -                  -
                                                                                                                                     maximum width/minimum gauge ratio = 1700:1



       HSLA WEATHERING STEEL

      ASTM A606 Type 4
 A1    Width in (mm)                      30    (762)           36    (915)      42 (1067)      48    (1219)     54      (1372)      64   (1625)       66   (1676)           72 (1828)
        Min Nominal Gauge in (mm)         0.026 (0.66)      0.026 (0.66)       0.026 (0.66)    0.030 (0.76)     0.034 (0.61)       0.040 (1.0)              -                  -
        Max Nominal Gauge in (mm)         0.092 (2.3)       0.092 (2.3)        0.092 (2.3)     0.092 (2.3)      0.092 (2.3)        0.092 (2.3)              -                  -
                                                                                                                                     maximum width/minimum gauge ratio = 1600:1




       TABLE 1 - MANUFACTURING TOLERANCES
             Gauge Range Min (in) Standard Tolerance * (in)                           Available Tolerance**           NOTES:
        (in)  0.015 – 0.019          + 0.003 / - 0.000                                + 0.0020 / - 0.000              * 1/2 ASTM standard thickness tolerance
                0.020 – 0.039                   + 0.003 / - 0.000                     + 0.0020 / - 0.000
                0.040 – 0.057                   + 0.004 / - 0.000                     + 0.0020 / - 0.000              ** 1/4 ASTM standard thickness tolerance available on DSPC
                                                                                                                         sourced sheet only. Maximum width - 62”. Please inquire.
                0.058 – 0.070                   + 0.005 / - 0.000                     + 0.0025 / - 0.000
                0.071 – 0.098                   + 0.005 / - 0.000                     + 0.0025 / - 0.000              Flatness and width tolerances conform to ASTM A568
                0.099 – 0.134                   + 0.006 / - 0.000                     + 0.0030 / - 0.000




      TABLE 2 - SURFACE FINISHES AVAILABLE
                   Surface Finish *       Ra Value   (   in )   (Typical) **          Peak Count (Min)                NOTES:
                   Smooth                            15 - 35                              140 min                      * Other surface finishes available through inquiry.
                 Light Matte                         25 - 45                               75 min                     ** Ra and PPI values are typical but not guaranteed. Ra
                    Matte                            30 - 60                              100 min                        calculated using arithmetic mean method.




      NOTE: The information contained within these tables represents typical dimensions, grades, and specifications available. Please inquire for the availability of any
            grade, dimension, or specification not represented within these tables. Updates to these tables can be downloaded as Adobe Acrobat pdf files from
            www.algoma.com/sheet.html




Issued February 2001                                                                                                                                            Cold Rolled Page 10

								
To top