Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out

Armscor Model 14P .22 Rifle Manual

VIEWS: 285 PAGES: 7

									ARMSCOR
                                     MODEL 14P
                                    USER’S MANUAL

WARNING:
READ THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL
CAREFULLY BEFORE USING THIS FIREARM.

DISCHARGING FIREARMS IN POORLY VENTILATED                           AREAS,       CLEANING
FIREARMS OR HANDLING AMMUNITION MAY RESULT IN EXPOSURE TO
LEAD AND OTHER SUBSTANCES KNOWN TO THE STATE OF CALIFORNIA TO
CAUSE BIRTH DEFECTS, REPRODUCTIVE HARM AND OTHER SERIOUS
PHYSICAL INJURY. HAVE ADEQUATE VENTILATION AT ALL TIMES. WASH
YOUR HANDS THOROUGHLY AFTER EXPOSURE.

INSTRUCTIONS FOR OPERATING AND CARE
   This rifle is shipped from the factory with the gunstock packed separately from the
barrel receiver assembly and bolt assembly.

ASSEMBLY
   Remove the screw from the stud on the underside of the barrel and directly opposite
the trigger housing. (Note that the stud can be moved sideways and is kept from sliding
out by staking the ends of the dovetail cut). Fit barrel-receiver and trigger housing
assembly to the stock such that the stud freely fits into the hole provided for it in the
gunstock. Tighten screw to nest barrel on the stock.

TO PUT BOLT INTO RECEIVER
   Before putting bolt into receiver. Note first if bolt is cocked. If not, push bolt into
receiver as far as possible, then rotate bolt handle upward, thus cocking bolt. With safety
in “F” position and bolt cocked, pull trigger fully, insert bolt into receiver and close fully.
Turn bolt handle downward to lock.
TO LOAD MAGAZINE
   Hold magazine firmly in one hand. With the other hand place cartridge on top just
forward of notch and press head downward under ears at rear of magazine. Repeat until
maximum number of cartridges is loaded.

TO MAKE SAFE
   Pull safety on right side of receiver in the direction of the “S” mark. This locks
trigger and gun cannot be fired.

TO ATTACH MAGAZINE
   Position magazine open end up and ears rearward. Push magazine inward until it
engages with magazine catch.

TO OPEN ACTION
   Hold bolt handle and rotate cocking cam counter clockwise. As soon as the lugs clear
the lug seat, pull bolt handle fully rearward.

TO CLOSE ACTION
   Push bolt handle fully forward and rotate cocking cam clockwise until lugs are
properly seated..

TO FIRE
   BE SURE GUN IS POINTED TOWARD TARGET. With action closed, push safety
to “F” position. Pull trigger. To repeat, open and close action. The discharged shell will
be ejected and a new cartridge will be fed into the chamber. Pull trigger. Repeat process
until magazine is empty if desired.

TO REMOVE MAGAZINE BOX
   To disengage magazine, pull magazine catch rearward, hold on lock and pull box
downward and out.

TO LOAD RIFLE FOR SINGLE SHOT
   Insert cartridge directly into barrel with empty magazine box in place.
CARE OF RIFLE
   After firing wipe out bore with clean patch, followed by oily patch if firearm is to be
used again soon.
   If firearm is to be stored, use a good grade of gun grease in bore as well as outside.
   Interior of barrel should be cleaned free of grease before firing to ease passage of
bullet and to prevent swelled bore or injury to barrel. Always keep cocking cam in bolt
assembly slightly oiled.
   If short cartridges are used, clean chamber after shooting as lead accumulated at
forward end of chamber prevents free chambering of long cartridges unless removed.
CONSISTENT         USE     OF   22   CALIBER       LONG     RIFLE     CARTRIDGES            IS
RECOMMENDED.


CAUTION
   The safety in your firearm is correctly designed, fitted and tested. However, any
mechanical device can fail. Never point your firearm at anything but a safe target and
never rely upon the safety to justify careless handling.


SPECIFICATIONS:
   Barrel Length       :   22.875 inches
   Trigger Pull        :    3.500 inches
   Length of Pull      :   13.500 inches
   Drop at Heel        :    2.000 inches
   Drop at Comb        :    1.500 inches
   Overall Length      :   39.75 inches
   Weight              :    6.500 pounds
   Magazine Capacity: 6 , 10 , 15 , Cal. 22 LR
   Front Sight         :   Open Type
   Rear Sight          :   Rocky Mountain Partridge type
                           with Serrated Blade for Elevation
   Stock               :   Philippine Mahogany
  Ordnance Steel Precision Rifled Barrel
  Six (6) Grooves, Right Hand Twist
  Positive Thumb Operated Safety

PART NAMES                                 PART NOS.
A – BARREL-RECEIVER ASSEMBLY
  Barrel Receiver Cross Pin                  1401
  Barrel                                     1402
  Barrel Take Down Stud                      1403
  Barrel Take Down Screw                     1404
  Barrel Take Down Screw Washer              1405
  Ejector                                    1406
  Ejector Screw                              1407
  Front Sight Hood                           1408
  Front Sight Ramp                           1409
  Front Sight Screw                          1410
  Rear Sight Elevator                        1411
  Rear Sight Leaf                            1412
  Rear Sight Leaf Blank Insert               1413
  Receiver                                   1414


B – BOLT ASSEMBLY
  Bolt                                       1415
  Cocking Cam                                1416
  Cocking Cam Handle                         1417
  Cocking Cam Stud                           1418
  Cocking Cam Stud Retainer                  1419
  Cocking Cam Stud Retainer Spring           1420
  Extractor Left Hand                        1421
  Extractor Right Hand                       1422
  Extractor Plunger                          1423
  Extractor Spring                         1424
  Firing Pin                               1425
  Firing Pin Spring                        1426
  Firing Pin Spring Retainer Pin           1427
  Firing Pin Spring Follower               1428
  Hammer                                   1429
  Firing Pin Cross Pin                     1429-A


C – TRIGGR HOUSING ASSEMBLY
  Magazine Catch Insert                    1430-A
  Magazine Catch                           1430
  Magazine Catch Pivot pin                 1431
  Magazine Catch Stop Pin                  1432
  Safety Latch                             1433
  Safety Latch Bearing                     1433-A
  Safety Latch Bearing Spring              1433-B
  Safety Latch Pivot Pin                   1434
  Safety Latch Button                      1435
  Sear                                     1436
  Sear Pivot Pin                           1437
  Sear Spring                              1438
  Sear Stop Pin                            1439
  Trigger                                  1440
  Trigger Pivot Pin                        1441
  Trigger Spring                           1442
  Trigger Stop Pin                         1443
  Trigger Housing                          1444
  Trigger Housing Hold Down Screw, Front   1445
  Trigger Housing Hold Down Screw, Rear    1446


D – MAGAZINE BOX ASSEMBLY
  Magazine Box                         1447
  Magazine Spring                      1448
  Magazine Spring Follower             1449
  Magazine Spring Retainer             1450
  Magazine Spring Retainer Cross Pin   1451


E – GUN STOCK ASSEMBLY
  Butt Plate (Plastic)                 1452
  Butt Plate Retainer Screw            1453
  Gun Stock. Ordinary                  1454

								
To top