Battery Dome Light Installation Instructions

							Battery Dome Light Installation Instructions                                  July 30, 2004

Included in the Battery Dome Light package is:

1 – Battery Dome Light (batteries not included)
4 – Robertson screws

Position the Battery Dome Light so that the switch is facing you when you open the truck lid.
Place the Battery Dome Light about 1’’ behind the serial plate (located behind the push
button lock, underneath the lid)

Use the 4 screws to tighten the dome in place. The clear cover is removable for battery
replacement.

IMPORTANT: Do not over-tighten screws or you will strip the fiberglass, hand
tightening with a screw driver is recommended.