Lexan Corrugated sheet warranty-SABIC26022008

Document Sample
Lexan Corrugated sheet warranty-SABIC26022008 Powered By Docstoc
					Lexan* Corrugated Sheet                                                                                    Warranty Conditions

Ten Year Limited Written Warranty Light Transmission and Yellowness
and Five Year Limited Written Warranty Hail Damage
Standard Lexan Corrugated sheet grades will not break due to loss of impact strength through weathering within five (5) years of the
date of sale by SABIC Innovative Plastics and will not display excessive yellowing and loss of light transmission within ten (10) years of
the date of sale by SABIC Innovative Plastics.


This limited written warranty is subject to the following conditions:
1)   This limited written warranty applies solely to standard           •     Loss of light transmission will be determined by subjecting a
     Lexan Corrugated sheets sold by SABIC Innovative Plastics                cleaned sheet sample to the Light Transmission Test ASTM
     in Europe, in the colors clear, opal white and solar grey,               D1003 (1977). Any claims for sheets displaying a loss of light
     used correctly as flat, sloped or curved glazing, handled,               transmission of 10 % or less, compared to the original value,
     stored, processed, installed and maintained according to                 will not be accepted.
     SABIC Innovative Plastics’ recommendations. In all cases,
     the surface bearing the proprietary UV protection must be          5)    SABIC Innovative Plastics reserves the right to investigate
     the only side exposed to direct sunlight and the effects of              independently the cause of any failure.
     weather.
                                                                        6)    If a claim under this limited written warranty is justified, SABIC
2)   This limited written warranty does not apply to sheet that               Innovative Plastics will provide the purchaser with replacement
     has been thermoformed, scratched, abraded or exposed to                  material free of charge in accordance with the following
     corrosive materials or chemicals.                                        schedule:

3)   This limited written warranty is given only to the original              Time from Orig. Purchase Date        Material Replacement
     purchaser of SABIC Innovative Plastics sheet and does not                                                     Light tr./Yell. Impact
     extend to any subsequent purchaser or transferee. Any                                                                         resist.
     warranty claim hereunder must be made immediately within
     the warranty period by specifying the claim in writing and               Up to 5 years                        100%              100%
     submitting to SABIC Innovative Plastics the original sales               in 6th year                          75%               nil
     receipt which must contain the name and address of the                   in 7th year                          60%               nil
     purchaser, the date of purchase, the complete product                    in 8th year                          45%               nil
     name, the lot number and the volume purchased. On                        in 9th year                          30%               nil
     request of SABIC Innovative Plastics claimant must allow                 in 10th year                         15%               nil
     the material to be inspected on site and/or return the sheet
     to SABIC Innovative Plastics for testing.                                If replacement material cannot be provided within a reasonable
                                                                              period of time, SABIC Innovative Plastics may opt to refund the
4)   For the purpose of this limited written warranty:                        original purchase price paid to SABIC Innovative Plastics, or a
                                                                              portion thereof, in accordance with the above schedule.
•    Loss of impact strength through weathering will be
     determined by subjecting a sample of an undamaged sheet            7)    This limited written warranty shall be SABIC Innovative Plastics’
     to impact testing using ASTM D3029/Ford modified Gardner                 sole liability and customer’s exclusive remedy for the products
     test. Acceptance of a claim under this limited written                   and all other claims for damages are excluded. The limited
     warranty requires a test result of less than 5 ft-lb.                    written warranty is in lieu of all other warranties (except of
                                                                              title), written or oral, statutory, express or implied, including
•    Yellowing will be determined by subjecting a cleaned sheet               any warranty of merchantability or fitness of purpose. This
     sample to the Yellowness Index Test ASTM D1925. Any                      limited written warranty shall be governed by the laws of the
     claims for sheets displaying a change in Yellowness Index of             Netherlands.
     10 units or less compared with their original value, will not
     be accepted. Loss of light transmission will be determined         8)    This limited written warranty has been issued on March 17th,
     by subjecting a cleaned sheet sample to the Light                        2008, is restricted to material sold by SABIC Innovative Plastics
     Transmission Test ASTM D1003.                                            after such date and supersedes all previously issued warranties
                                                                              for the products mentioned above.




*    Trademark of SABIC Innovative Plastics IP BV


Lexan*
Lexan* Corrugated Sheet                                                                                  Warranty Conditions

This limited written warranty has been issued on March 17th 2008.
This is the sole warranty for Lexan Corrugated sheet, sold after said date.




Americas:                                                     Europe:                                                 Pacific:
SABIC Innovative Plastics                                     SABIC Innovative Plastics                               SABIC Innovative Plastics
Specialty Film & Sheet                                        Specialty Film & Sheet                                  Specialty Film & Sheet
One Plastics Avenue                                           Plasticslaan 1                                          1266 Nanjin Road (W)
Pittsfield, MA 01201                                          NL - 4612 PX Bergen op Zoom                             Plaza 66, 17th Floor
USA                                                           The Netherlands                                         200040 Shanghai, China
Tel. (1) (413) 448 5400                                       Tel. (31) (164) 292911                                  Tel. (86) 21 62881088
Fax. (1) (413) 448 7506                                       Fax. (31) (164) 293272                                  Fax. (86) 21 62880818
Toll free: 1-800 451 3147

THE MATERIALS, PRODUCTS AND SERVICES OF SABIC INNOVATIVE PLASTICS HOLDING BV, ITS SUBSIDIARIES AND AFFILIATES
(“SELLER”), ARE SOLD SUBJECT TO SELLER’S STANDARD CONDITIONS OF SALE, WHICH CAN BE FOUND AT http://www.sabic-ip.com
AND ARE AVAILABLE UPON REQUEST. ALTHOUGH ANY INFORMATION OR RECOMMENDATION CONTAINED HEREIN IS GIVEN IN GOOD
FAITH, SELLER MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT THE RESULTS DESCRIBED HEREIN WILL BE
OBTAINED UNDER END-USE CONDITIONS, OR (ii) AS TO THE EFFECTIVENESS OR SAFETY OF ANY DESIGN INCORPORATING SELLER’S
PRODUCTS, SERVICES OR RECOMMENDATIONS. EXCEPT AS PROVIDED IN SELLER’S STANDARD CONDITIONS OF SALE, SELLER SHALL
NOT BE RESPONSIBLE FOR ANY LOSS RESULTING FROM ANY USE OF ITS PRODUCTS OR SERVICES DESCRIBED HEREIN. Each user is
responsible for making its own determination as to the suitability of Seller’s products, services or recommendations for the user’s
particular use through appropriate end-use testing and analysis. Nothing in any document or oral statement shall be deemed to alter or
waive any provision of Seller’s Standard Conditions of Sale or this Disclaimer, unless it is specifically agreed to in a writing signed by
Seller. No statement by Seller concerning a possible use of any product, service or design is intended, or should be construed, to grant
any license under any patent or other intellectual property right of Seller or as a recommendation for the use of such product, service or
design in a manner that infringes any patent or other intellectual property right.


 SABIC Innovative Plastics is a trademark of Sabic Holding Europe BV


* Trademark of SABIC Innovative Plastics IP BV


www.sabic-ip.com                                                                                                      Latest update Sabic (02/08)

				
DOCUMENT INFO
Shared By:
Stats:
views:23
posted:3/17/2010
language:English
pages:2