"PV371 USB DVB-T Box Installation Manual"
PV371 USB DVB-T Box Installation Manual A. Pre-installation 1. PV-371 Product Specification 2 2. PV-371 Hardware Equipment 2 3. PV-371 Connection 3 4. Notice Before Installation 4 4.1 About Hardware 4 4.2 About Software 4 B. Installation 1. How to install the hardware of PV-371 4 2. Installing the software of PV-371 on Windows ™2000/XP 4 Version 1.0 Date 2005/03/01 1 A. Pre-installation Congratulation You have purchased PV-371, which is using high quality chipset will bring you the best quality of watching Digital Television. 1. PV-371 Product Specification PV-371 Interface USB 1.1/2.0 Video input 1.Win 2K/XP(WDM) Driver Software 2.DVB-T Software Pentium 2.4Ghz or higher level PC 256MB RAM System 2X CD-ROM Requirement Windows 2K SP4 / XP SP1 OS 16bit or higher level Sound-Card. PCI/AGP VGA card & Monitor 2. PV-371 Hardware Equipment . PV-371 box 1pcs . Software CD 1pcs . User’s Manual 1pcs . USB Cable 1pcs . Remote Controller 1pcs VI. Digital TV Signal Receiver 1pcs Antenna of Signal Receiver Base of Signal Receiver 2 3. PV-371 Connection IR Receiver USB port Power LED(Red Light) Signal Lock LED (Yellow Light) DTV Signal Receive port 3 4. Notice Before Installation 4.1 About Hardware PV-371 is an USB1.1/2.0 interface used Digital TV box. Please confirm that still have available USB port and already installed the driver before installing PV-371. 4.2 About Software Please make sure if Microsoft™ DirectX9.0 or higher version already been installed in Windows™2K/XP. B. Installation 1. How to install the hardware of PV-371 PV-371 supports PnP(Plug and Play) technology. Humanity installation of AP & Driver lets you use it more convenient. Please note and follow the installing steps as below: 2. Installing the software of PV-371 on Win™2000/XP 2.1 Turn on your PC and connect PV-371 with PC by USB cable, Windows OS will detect the new adding hardware. 2.2 OS will detect the new USB Device as below picture, press “Cancel” to continue. Press “Cancel” 2.3 After press “Cancel“, please put the installation CD into CD-ROM and run X:\setup.exe (assume your CD-ROM driver is X:\..), then will appear below window. Press “Continue Anyway” 4 2.4 Then the OS will install the DTV software as below, please press “Next” to continue. Press “Next” 2.5 Before start to install the software, please see the License Agreement and agree to the terms of license agreement and then click “Next”. Press “Next” 2.6 Please input your name & company into blanks and then click “Next”. Press “Next” 5 2.7 Please input the Serial Number attached with the software and then click “Next”. Press “Next” 2.8 Please select the language of interface in software and then click “Next”. Press “Next” 2.9 Suggest to keep the installing path as default setting and then click “Next”. Press “Next” 6 2.10 Also suggest to keep the installing folder as default setting and then click “Next”. Press “Next” 2.11 Then will appear installing message for your re-check and then click “Next”. Press “Next” 2.12 After few time, it will auto-install into system and then press “Finish”. Then the system will auto reboot. Press “Finish” 7 2.13 Before system boot into system again, it will auto install DirectX 9 as below. Please press “Next”. Press “Next” 2.14 Then please press “Next”. Press “Next” 2.15 After above step, please wait for few minutes for installing DirectX. 8 2.16 Finally please press “Finish” and then please do restart your PC. Press “Finish” 2.16 After reboot PC, please go [START] [SETTINGS] [CONTROL PANEL] [SYSTEM] [HARDWARE] [DEVICE MANAGER] [SOUND, VIDEO AND GAME CONTROLLER] to check the driver if already be installed in system without any problem. DVB-T USB2.0 Device 2.17 Double click on desktop to run the DTVplayer.exe and please do the “Auto-Scan” when first time to run the DTV. Enjoy the Digital TV performance! 9