Product Technical Data Sheet Deckmaster Fastcure Finish

							Product Technical Data Sheet                                                             Deckmaster Fastcure Finish


             Description
                                                                No.51, Deckmaster DPM Primer,
             Fastcure Finish is a two component top coat,       Deckmaster Asphalt Primer.
             consisting of Fastcure resin, Fastcure Initiator
             with the optional addition of Fastcure colour      Application Temperature
             paste.                                             Fastcure Finish can be applied at
                                                                substrate and ambient temperatures as
             Usage / Purpose                                    low as -10c , providing that the substrate is
             Fastcure Finish is a top coat used with            frost free.
             Fastcure Primer No.50, Fastcure Elastomeric
             Resin, Fastcure Trowel Grade or Fastcure HFS       Application Instructions
             Primer. Applications include car parks,            Fastcure Finish resin should be stirred well
             industrial floors, retail areas, balconies,        to achieve a homogenous state. The
             walkways, plazas, fountains etc.                   Fastcure Colour paste (if required) should
                                                                then be added and mixed thoroughly using
             Packaging
             Fastcure Finish Resin:                             a slow speed drill and paddle. Once fully
             180kg steel barrels and 50 kg drums                mixed, add the Fastcure initiator and mix
             Fastcure Initiator:                                thoroughly again using the same method
             2kg bags and 25kg boxes                            as above. Refer to the table below for
             Fastcure Colourpaste: 400g pot Colour              dosage rates.
             Fastcure Dry/Chem Resin: Colourless
             Fastcure Initiator: White powder                   Pour the mixed Fastcure Finish onto the
             Fastcure Colourpaste: Standard colours
                                                                floor in ribbons and spread using a short
             available:
                                                                pile roller. This floor can be trafficked 30-
             Technical Information:                             60 minutes after application. For
                                                                application details refer to Deckmaster
             Composition                                        technical services
             Fastcure Dry/Chem Sealer is a two component
             Methylmethacrylate-based top coat.                 Dosage chart
                                                                A typical addition rate for 20C or below is a
             Characteristics (Typical Values)                   2% addition of initiator by weight of the
             VISCOSITY (DIN53214 at 25C)70 -90mPas              resin. For temperatures above 20C please
                                                                contact Deckmaster
             DENSITY (DIN 51757 at 25C) 0.99/cm3
                                                                Coverage Rate
             POT LIFE: Approximately 15 minutes                 Application rates may vary depending on
                                                                substrate conditions.
             CURING TIME (at +20C) Approx 30 mins
                                                                Health and safety Precautions
             FLASH POINT +10C                                   Product health and safety data sheets
                                                                much be read and understood before use.
             Performance (Typical Values)
             TENSILE STRENGTH(DIN 53455) 40N/mm2                Storage
                                                                Store in dry, shaded conditions between
             ELONGATION AT MAXIMUM STRENGTH                     +5C and +25C
             1.7%
                                                                Shelf Life
             ELONGATION AT BREAK                                6 months when stored as recommended in
             1.7%                                               original unopened containers . packaging.

             E MODULUS                                          DECKMASTER LTD
             3140N/mm2                                          Blackthorn House
                                                                Skull House Lane
             DENSITY (DIN 53479 at +20C)                        Appley Bridge
             1.19g/cm2                                          Wigan
                                                                WN6 9DB
             USAGE GUIDELINES                                   Tel : 01257 257 028 258 Fax : 01257 571
             Surface Preparation                                189
                                                                www.deckmaster.co.uk
             Fastcure Finish is designed to be applied over     Ref. 20094
             Deckmaster Fastcure Primer, Fastcure Primer