SMARTBoard Troubleshooting Tips
Symptoms Solutions
Red light on SMARTBoard 1. Unplug the USB cords, count to
(This means the SMARTBoard is not five and plug back up.
communicating with the computer) 2. Try a different usb port on the
computer.
3. Hit the blue reset button on the
side of the SMARTBoard behind
the light for 10 seconds
4. Reinstall the SMARTBoard
Software
blinking green light 1. Doubleclick on the
(SMARTBoard is communicating but SMARTBoardservice icon:
the software is not working) Windows: Double-click on Hard Drive-
Program Files-SMART Technologies-
SMARTBoardservice icon
Mac:
Navigate to Macintosh HD-Application-
SMART Board Drivers and double-click
on SMARTBoardservice icon (It may
also be found in the Additional Tools
folder).
2. Unplug the USB cords, count to
five and plug back up.
3. Try a different usb port on the
computer.
4. Hit the blue reset button on the
side of the SMARTBoard behind
the light for 10 seconds
5. Reinstall the SMARTBoard
Software
Steady Green light If computer/Notebook freezes:
(SMARTBoard should work) 1. Shutdown the computer.
Count to 10 and then start the
computer up.
2. Delete the com.smarttech
preferences found in the
macintosh-users-library folder.
When you write on the This means that the SMARTBoard is
SMARTBoard, the pen doesn’t write getting grounded out. It needs to be
correctly or you can’t draw straight either moved away from magnets or
lines or there are dead spots. metal.
1. Hit the blue reset button on the
OR side of the SMARTBoard for
10 seconds.
Computer mouse stays in a corner of 2. Find the box with with light in
the SMARTBoard. the bottom right corner. See if
it is touching metal or the
magnetic chalkboard is
affecting it. Put a barrier of
cardboard between the
SMARTBoard and the
chalkboard or between the
SMARTBoard and the metal.
3. Find the screw that is holding
the SMARTBoard in place and
make sure it isn’t screwed into
metal
Yellow post it appears on screen or To turn your handwriting recognition
NO handwriting capabilities back on:
1. Click on the apple in the top left
corner
2. Click on system preferences
3. Click on Ink (This will appear the
first time a SMART Board is
connected to the computer)
4. Turn on Handwriting recognition
5. Uncheck Allow me to ink in any
application and uncheck show ink
window
Notebook has encountered an error 1. Try copying this file from a good
in processing program settings. computer and replace it on the bad
computer. Mac HD > Users > Shared >
Reinstall Notebook to restore the Library > Preferences >
default settings. com.smarttech.Registry.plist
2. Reinstall Notebook software
Ghost mouse on Vista 1. Open the Windows control panel
and double click on Pen and Input
Devices.
2. Select the Touch tab in this
window and remove the check mark
from the Touch Pointer box
5 Tips for Fixing SMARTBoard Problems:
1. Check and see if your problem is listed on this SMART Exchange
web page at http://exchange.smarttech.com/forums/t/2835.aspx
2. Type in key words desribing your problem in the search box at
http://exchange.smarttech.com/forums/t/2835.aspx
3. Navigate to http://exchange.smarttech.com/forums/14.aspx
4. Write a new post. Include information about your Computer
operating system (Windows XP, Vista or MAC 10.4 or 10.5), RAM,
Notebook version. List as many details as you can about your
problem.
5. Contact Smarttech by email, phone or chat at
http://www2.smarttech.com/st/en-US/Support/Contact/default.htm