Docstoc

Step by Step - Excel

Document Sample
Step by Step - Excel Powered By Docstoc
					         TAJUK PSM SESI 2009/2010 SEMESTER 1

                  Tatacara Memilih Tajuk PSM
                  TAJUK DILULUSKAN BERDASARKAN
                   "FIRST COME FIRST SERVE BASIS"

1. Pilih beberapa tajuk yang anda berminat mengikut jabatan anda sendiri

2. Catitkan nama penyelia bagi tajuk -tajuk berkenaan

3. Jumpa dengan penyelia tersebut dan tanyakan statusnya

4. Sekiranya tajuk itu masih available, bincangkan mengenainya dan pergi ke langkah 6....

5. Jika tajuk itu telah diambil pelajar lain, pilih tajuk atau penyelia lain sebelum
   ke langkah 6. Inilah tujuannya pelajar diminta pilih lebih dari satu tajuk.

6. Bincang dan fahamkan objektif, skop, outcome, etc. sedalam yang mungkin dengan penyelia

7. Sekiranya faham dan bersetuju untuk ambil tajuk dan penyelia berkenaan, sila tandatangani
   bahagian B borang cadangan tajuk yang telah diluluskan dan ditandatangani ketua jabatan.

8. Borang yang telah lengkap diisi dan ditandatangani bahagian (C) dan (B) hendaklah
   dibuat dua salinan untuk simpanan penyelia & pelajar.

9. Borang asal hendaklah diserahkan kepada Puan Intan Sharhida Binti Othman sebelum 31/7/09
   untuk difailkan oleh JK PSM.




   NOTA PENTING:
   Sekiranya anda ada sebarang masalah berkaitan atau ingin menukar / memurnikan
   Tajuk PSM selepas 30/7/2009, sila hubungi:

   Ir. Sivarao Subramonian
   Telefon: 0166341481
   Email: sivarao@utem.edu.my




   Satu taklimat mengenai tatacara pelaksanaan PSM akan diadakan
 antara minggu pertama dan kedua. Sila peka terhadap notis berkaitan
                       yang bakal dinaikkan.
                                                                                          JABATAN PROCESS
                                                                                                                                                                   PROJEK INDUSTRI
BIL TAJUK PROJEK SARJANA MUDA 1 (PSM)                                                               NAMA PENYELIA         NAMA PENILAI   NAMA PELAJAR (Jika Ada)
                                                                                                                                                                        (Y/T)

1    The Influence Of Cutting Parameter On Chip Thickness In Turning Operation                      Dr. Ahmad Kamely


2    Thermal Modeling Of White Layer Formation In Turning Operation With Multipass Cutting          Dr. Ahmad Kamely


3    High Speed Precision Milling Process With 5 Axis To Produce Mirror Surface Finish              Dr. Ahmad Kamely

     An Experimental Investigation To Study The Effect Of White Layer Formation In Turning
4                                                                                                   Dr. Ahmad Kamely
     Operation By Fatique Testing

     A Study On The Comparison Of Cylindrical Grinding Process With Conventional Lathe
5                                                                                                   Dr. Ahmad Kamely
     Machining On Component Fatique Life.

6    Preliminary Investigation On Wood Cutting Operation With A 5-Axis Milling Machine.             Dr. Ahmad Kamely


7    Application Of Ergonomic Principles To Evaluate The Leg Stress During Vehicle Driving.         Dr. Ahmad Kamely


8    Measurement Of Cutting Tool Coating Thickness By Alpha Thickness Gauging Method.            En. Mohamad Nizam Ayof

     Study On The Effect Of Relative Humidity On Measurement Variance Conducted At The
9                                                                                                En. Mohamad Nizam Ayof
     Utem Fkp Metrology Laboratory

     An Experimental Investigation On The Kerf Quality During Laser Cutting Of Aluminium Alloy
10                                                                                               En. Mohamad Nizam Ayof
     Sheet

11   Application Of Ftir Spectroscopy For Lubricating Oil Conditioning Monitoring At Miyazu      En. Mohamad Nizam Ayof


12   Application Of Ftir Spectorscopy To Assess The Quality Of Adulterated Palm Oil.             En. Mohamad Nizam Ayof

     Energy Audit Case Studies In The Centralized Air Conditioning Cooling System At Fkp,
13                                                                                               En. Mohamad Nizam Ayof
     Utem

14   Process Parameters Optimization In Spot Welding Of Metal Sheets                                Dr Lok Yian Yian

     A Study On The Impact Of Injection Molding Parameters On The Processed Plastic Product
15                                                                                                  Dr Lok Yian Yian
     Dimensional Stability

16   Prediction Of Surface Roughness By Using Rsm (Response Surface Methodology)                    Dr Lok Yian Yian


17   Impact Of Plastic Injection Molding Process Variables On Blending Homogeneity                  Dr Lok Yian Yian


18   Effect Of Molding Cycle Time In Plastic Injection Molding Process                              Dr Lok Yian Yian


19   Determination And Analysis Of Mechanical Properties Of Stainless Steel Weldments              En. Johny Purnomo


20   Prediction Of Mechanical Properties Of Mild Steel Weldments                                   En. Johny Purnomo


21   Evaluation Of Mechanical Properties Of Aluminium Weldments.                                   En. Johny Purnomo
                                                                                                                                                                PROJEK INDUSTRI
BIL TAJUK PROJEK SARJANA MUDA 1 (PSM)                                                           NAMA PENYELIA          NAMA PENILAI   NAMA PELAJAR (Jika Ada)
                                                                                                                                                                     (Y/T)
     Application Of Kanban System To Optimize And Control Production Rate And Efficiency In
22                                                                                             En. Johny Purnomo
     Manufacturing Engineering Industries.
     Determination And Analysis Of Manufacturing Process Capability Index (Cp) In A Batch
23                                                                                             En. Johny Purnomo
     System Manufacturing Industry.
     Application Of Six Sigma Concept To Optimize Production Efficiency In A Mass Production
24                                                                                             En. Johny Purnomo
     Industry.
     A Comprehensive Study And Analysis Of Internal Manufacturing Process Capability In The
25                                                                                             En. Johny Purnomo
     Malaysian Electronic Industry.
     Design And Development Of A Direct Metal Deposition System By Using Mig Welding Heat
26                                                                                             Pn. Nur Izan Syahriah
     Source.
     An Exprimental Study On The Effect Of Mig Welding Parameters During The Cladding
27                                                                                             Pn. Nur Izan Syahriah
     Forming Of Stainless Steel On A Medium Carbon Steel Substrate

     Effect Of Heat Treatment Temperature And Time On Carbide Formation And Hardness
28                                                                                             Pn. Nur Izan Syahriah
     Determination Of Deposited Nickel-Based Alloys.
     Heat Flow And Structural Development During Direct Metal Deposition With The Aid Of Mig
29                                                                                             Pn. Nur Izan Syahriah
     Welding Technique.
     Direct Metal Deposition Of Stainles Steel By Using Wire Feed Method: An Experimental
30                                                                                             Pn. Nur Izan Syahriah
     Study On Microstructural Delopment And Mechanical Properties Determination
     Production And Characterization Of Titanium Carbide Particulate Reinforced Aluminium
31                                                                                                Dr Thoguluva
     Mmcs By Powder Metallurgy Technique For Aerospace Applications.
     The Influence Of Aging Time On The Mechanical Properties And Microstructure Of
32                                                                                                Dr Thoguluva
     Aluminium Copper Alloys.

33   Vibrational Molding Processing Of Lead Casting                                               Dr Thoguluva


34   Effect Of Loading Frequency On The Fatique And Fracture Of Lead Casting.                     Dr Thoguluva


35   Photo Elastic Stress Analysis Of Glass Fibre Renforced Epoxy Resin Pmcs                      Dr Thoguluva


36   Development Of An Expert System For Metal Casting Defect Analysis.                           Dr Thoguluva


37   Determination Of Molding Sand Properties For Green Sand Molding Process In Foundries.        Dr Thoguluva

     Design And Development Of A Separation System For The Recycled Plastic Laminate With
38                                                                                               En. Fairuz Dimin
     Aluminium Foil By Chemical Method
     Processing And Characterization Of A New Wood Plastic Composite From Recycled Plastic
39                                                                                               En. Fairuz Dimin
     And Wood Flour By Hot Pressing Technology
     Study Of The Effect Of Temperature And Relative Humidity On The Measurement Variance
40                                                                                               En. Fairuz Dimin
     Conducted At The Metrology Laboratory, Fkp Utem
     Physical Characterization Of Pe Maleic Anhydride Binder Blended Wood Plastic
41                                                                                               En. Fairuz Dimin
     Composites Processed By Hot Presssing Technique.

     A Study On The Chracterization Of Thermal And Optical Properties Of Photo Degraded
42                                                                                               En. Fairuz Dimin
     Ldpe Samples By Applying Q10 Rule.
     Characterization Of Thermal And Optical Properties Of Thermally-Degraded-Ldpe Samples
43                                                                                               En. Fairuz Dimin
     By Studying Their Ft-Ir And Dsc Spectrum.
     Processing And Characterization Of Thermal And Optical Properties Of Chitosan Zeolite
44                                                                                               En. Fairuz Dimin
     Polymer Composites By Using Ft-Ir Spectroscopy.

45   Measurement Of Cutting Tool Coating Thickness By Beta Thickness Gauging Method.             En. Fairuz Dimin
                                                                                                                                                                           PROJEK INDUSTRI
BIL TAJUK PROJEK SARJANA MUDA 1 (PSM)                                                          NAMA PENYELIA           NAMA PENILAI              NAMA PELAJAR (Jika Ada)
                                                                                                                                                                                (Y/T)
     Mechanical Properties And Tribological Studies On Graphite Particulate Reinforced
46                                                                                             En. Mohd Shukor
     Aluminium Mmc
     Wear Characterization And Tool Performance Of Aisi 1045 Steel When Machining With
47                                                                                             En. Mohd Shukor
     Sintered Carbide Inserts
     Mechanical Properties Determination Of A Mild Steel-Stainless Steel Joint Fabricated By
48                                                                                             En. Mohd Shukor
     Tig Welding Process.

49   Surface Integrity Study Of Mild Steel Machined By Ceramic Cutting Tools.                  En. Mohd Shukor

     Application Of Finite Element Analysis (Fea) To Study The Effect Of Different Electrode
50                                                                                             En. Mohd Shukor
     Size In Tig Welding Process.
     Microstructural Characterization And Xrd Analysis Of Al-Graphite Composites Processed
51                                                                                             En. Mohd Shukor
     By Powder Metallurgy Technique.

52   A Discrete Event Simulation Approach For A Networked Enterprise Problem                      Dr Bagas       Wan Naerah Wan Zainudin


53   Tool Wear Analysis Of Aisi D2 Steel In Hard Turning Operation                                Dr Bagas            Elinayanti Binti Azli


54   A Study On Hard Turning Process Of Aisi D2 Steel                                             Dr Bagas           Nur Fadila Bte Rasdi

     Analysis On The Edm Drill Parameter In The Hole Drilling Of Pre-Hardened Steel By
55                                                                                                Dr Bagas           Mohd Faizal B Ismail
     Applying Taguchi Method.

56   Micro-Hole Machining Of Inconel Alloy By Edm                                                 Dr Bagas        Mohd Akman B Md Janis


57   Optimization Of Micro Edm Drilling Process By Applying Taguchi Method                        Dr Bagas            Amirul Bin Yahya


58   A Study On Wafer Manufacturing Process                                                       Dr Bagas


59   Assessment Of Graphite Milling Process                                                       Dr Bagas


60   Development Of Statiscal Tools For Measurement Analysis By Excel                              Dr Rizal      Fitri Iskandar Bin Mohd Dalip


61   Eliminating Wastes :An Enhancement Of Productivity In A Manufacturing Company                 Dr Rizal        Mohd Fahmi Bin Ahmad

     A Study On The Effect Of Workpiece Length In Cylindrical Grinding To The Geometrical
62                                                                                                En. Kamil
     Dimensioning : Iso 1101 And Surface Roughness Of The Workpiece.
     A Study On The Effect Of Workpiece Length In Cnc Machining To The Geometrical
63                                                                                                En. Kamil
     Dimensioning : Iso 1101 And Surface Roughness Of The Workpiece
     A Study On The Measurement Performance Of Contact Method Using Portable Coordinate
64                                                                                                En. Kamil
     Measuring Machine (Cmm)-Faroarm
     Studies On The Calibration Method For Dial Gauge Indicator And Ring Gauge By Using An
65                                                                                                En. Kamil
     Universal Measuring Machine (Umm)

     Performance Evaluation Of 3D Laser Scanners On Portable Coordinate Measuring
66                                                                                                En. Kamil
     Machine (Cmm)-Faroarm In Metrology
     Effect Of Heat Treatment On The Surface Microstructure Of A Shot Peened Aluminium
67                                                                                               En. Ammar
     Alloy

68   Effect Of Milling Of Cast Iron By Using Coated Tool Inserts On Surface Finish               En. Ammar


69   Effect Of Milling Of Cast Iron By Using Coated Tool Inserts On Tool Life                    En. Ammar
                                                                                                                                                                         PROJEK INDUSTRI
BIL TAJUK PROJEK SARJANA MUDA 1 (PSM)                                                                   NAMA PENYELIA           NAMA PENILAI   NAMA PELAJAR (Jika Ada)
                                                                                                                                                                              (Y/T)
     An Exprimental Investigation Of Surface And Subsurface Texture On Engineering
70                                                                                                       Cik Liew Pay Jun
     Components By Turning Operation

71   Surface Texture Analysis In High Speed Milling                                                      Cik Liew Pay Jun


72   Optimization Of Machining Parameters In Wire Edm                                                    Cik Liew Pay Jun


73   Analysis Of Edm Parameters During The Micro Hole Machining Of Tungsten Carbide                      Cik Liew Pay Jun


74   A Study On The Quality Of Micro Hole Machining Of Tungsten Carbide By Edm Process                   Cik Liew Pay Jun

     A Study On The Optimization Of Laser Processing For Economic Production Of Finished
75                                                                                                    Ir. Sivarao Subramonian
     Parts.

76   Investigation For Quality On The Micro And Macro Level Defects In Laser Cutting                  Ir. Sivarao Subramonian


77   An Interface Development For Laser Processing                                                    Ir. Sivarao Subramonian


78   Improving The Efficiency For Better Inflation Process By Using Appc                              Ir. Sivarao Subramonian

     Improvement Of Screening And Viewing In The Process Monitoring For Better
79                                                                                                    Ir. Sivarao Subramonian
     Customization

80   An Integrated Modeling For Laser Machining Process                                               Ir. Sivarao Subramonian


81   Doe Application For Non-Linear Laser Processing                                                  Ir. Sivarao Subramonian


82   Tool Life Prediction By Applying Taylor'S Method                                                    En. Riduan Jamli


83   Effect Of Inclined Ball Milling Process On Mild Steel                                               En. Riduan Jamli


84   Effect Of Inclined Ball Milling Process On Aluminium Alloy                                          En. Riduan Jamli


85   Feed Rate Optimization And Efficiency Enhancement In Ball End Milling Of Aluminium Alloy            En. Riduan Jamli


86   Feed Rate Optimization And Effciency Enhancement In Ball End Milling Of Mild Steel                  En. Riduan Jamli

     Design a PCBA universal pallet for reflow oven soldering used in surface mount technology
87                                                                                                     En. Hanizam Hashim
     (SMT)

88   Design a PCBA universal pallet for wave soldering used in wave oven machine.                      En. Hanizam Hashim


89   Design a Mini PCBA Depanelise jig to separate PCBAs from panel into single piece.                 En. Hanizam Hashim


90   The Study of microstructure on Arc Welding process by different plate thickness                 En. Mohd Irman Bin Ramli


91   The Influence of Electrode Diameter on Aluminum Alloy Weldments                                 En. Mohd Irman Bin Ramli

     The Study of Magnetic Micrometer Precision Ability on Wafer Biscuits Thickness
92                                                                                                   En. Mohd Irman Bin Ramli
     Measurement

93   Comparison of measurement errors produced between CCD Camera and CMM                        KHAIRUL ANUAR BIN ABD RAHMAN
94    Validation of In-house Calibration Method for Caliper Comparing with JIS Standard              KHAIRUL ANUAR BIN ABD RAHMAN

      Effect of substrate roughness on the adhesion of TiAlN coating onto Tungsten carbide
95                                                                                                     MD NIZAM BIN ABD RAHMAN
      substrate
      Effect of substrate cleaning on the adhesion of TiAlN coating onto Tungsten carbide
96                                                                                                     MD NIZAM BIN ABD RAHMAN
      substrate
      Effect of substrate holder rotational speed on the thickness, microstructure and hardness of
97                                                                                                     MD NIZAM BIN ABD RAHMAN
      deposited coating

98    Correlation study between cutting force and tool wear                                            MD NIZAM BIN ABD RAHMAN      TAJUK TAMBAHAN (15/7/09)


99    Effect of the PVD process parameter on the thickness of coating                                  MD NIZAM BIN ABD RAHMAN

      Coating thickness uniformity in through holes (geometric features of the substrate) for
100                                                                                                    MD NIZAM BIN ABD RAHMAN
      various diameters

    Coating thickness uniformity in blind holes (geometric features of the substrate) for various
101                                                                                                    MD NIZAM BIN ABD RAHMAN
    diameters
                                                                                                 JABATAN BAHAN
                                                                                                                                                                                                PROJEK INDUSTRI
BIL TAJUK PROJEK SARJANA MUDA 1 (PSM)                                                                     NAMA PENYELIA            NAMA PENILAI          NAMA PELAJAR (Jika Ada)
                                                                                                                                                                                                (Y/T)

1    Mechanical and thermal properties of Intermetallic NiAl for automotive body applications.          Prof.Madya Dr. ANAND


2    Preparation and structural characterization of transition metal chalcogenide MoS2 thin films.      Prof.Madya Dr. ANAND

     Synthesis and characterization of transition metal chalcogenide MoS2 thin films for
3                                                                                                       Prof.Madya Dr. ANAND
     photoelectrochemical solar cell applications.

4    Mechanical and thermal properties of Pure nickel as alternative automotive body material           Prof.Madya Dr. ANAND

     Synthesis and characterization of transition metal chalcogenide MoSe2 thin films for
5                                                                                                       Prof.Madya Dr. ANAND
     photoelectrochemical solar cell applications.

6    Preparation and structural characterization of transition metal chalcogenide MoSe 2 thin films.    Prof.Madya Dr. ANAND


7    Mechanical and thermal properties of Intermetallic Ni3Al for automotive body applications.         Prof.Madya Dr. ANAND


8    Mechanical and thermal properties of Intermetallic Ni5Al3 for automotive body applications.        Prof.Madya Dr. ANAND

     Correlation Between Green and Sintered Density of Alumina Powder Compacted Through Cold
9                                                                                                       Prof.Madya Dr. ANAND
     Isotactic Pressing Procedures

     Correlation Between Green and Sintered Density of Ferrite Component Compacted Through
10                                                                                                      Prof.Madya Dr. ANAND
     Cold Isotactic Pressing Procedures

     Evaluation on the effect of varying manganese (Mn) composition towards AISI 304 and 316
11                                                                                                      En. Zulkifli Mohd. Rosli
     microstructure and hardness.
     Evaluation on the effect of varying Molybdenum (Mo) composition towards AISI 304 and 316
12                                                                                                      En. Zulkifli Mohd. Rosli
     microstructure and hardness.
     Effect of heat treatment on microstructure and mechanical properties of 304 and 316 steel: a
13                                                                                                      En. Zulkifli Mohd. Rosli
     comparison study.

14   Polished and non polished substrate of aluminum and titanium on oxide coating                      En. Zulkifli Mohd. Rosli

     Comparison study on the microstructure and corrosion rate of aluminum oxide and titanium
15                                                                                                      En. Zulkifli Mohd. Rosli
     oxide

16   Corrosion behaviors of tool steel in Tannic acids                                                  En. Zulkifli Mohd. Rosli


17   Heat treatment and mechanical properties of Ti6Al4V                                                En. Zulkifli Mohd. Rosli

     Potential Application of Biodegradable TS/SCFC Green Composite for Disposable Packaging
18                                                                                                     En. Jeefferie Abdul Razak                   Nurul Fariha Binti Othman (B050710115)
     Food Container
     Production and Characterization of EnviroRecycled-Wood Plastic Composites (eR-WPC) for
19                                                                                                     En. Jeefferie Abdul Razak                  Nurul Ayunni Binti Abdul Latif (B050710232)
     Structural Application

20   Sintering Characteristics of Injection Molded Components Using Waste Rubber Biopolymer            En. Jeefferie Abdul Razak                   Nurhashima Binti Shafiee (B050610177)        AMREC, SIRIM

                                                                                                                                                    Norsyazila Abu Bakar (B050710083) &
21   Composite Sol-Gel TiO2 for Photocatalytic Coating Application                                     En. Jeefferie Abdul Razak                                                                AMREC, SIRIM
                                                                                                                                                    Zainab Binti Mahamud (B050710227)
                                                                                                                                                                                           PROJEK INDUSTRI
BIL TAJUK PROJEK SARJANA MUDA 1 (PSM)                                                                      NAMA PENYELIA              NAMA PENILAI      NAMA PELAJAR (Jika Ada)
                                                                                                                                                                                           (Y/T)

22   Study The Effect Of Heat Treatment Temperature And Time On Of A Ni-Based Alloy                  Puan NurIzan Syariah Hussein

     Investigation of Damage Process due to Fatigue on Heat Treated Aluminum 7075 with the
23                                                                                                   En.Mohamad Haidir bin Maslan
     Effect of Corrosion

24   Investigation of Damage Process due to Fatigue on Heat Treated Aluminum 7075                    En.Mohamad Haidir bin Maslan


25   Analysis of Spring Back Problem on Aluminum Sheet                                               En.Mohamad Haidir bin Maslan


26   Investigation of Fatigue Crack Growth on Heat Treated Aluminum 7075 with Effect of Corrosion    En.Mohamad Haidir bin Maslan


27   Investigation of Fracture Toughness on Heat Treated Aluminum 7075 with Effect of Corrosion      En.Mohamad Haidir bin Maslan


28   Influence of Manganese (Mn) in Mechanical Properties and Corrosion of AISI 304 & AISI 316       Dr. Mohd Warikh bin Abd Rashid


29   Influence of Molydenum (Mo) in Mechanical Properties and Corrosion of AISI 304 & AISI 316       Dr. Mohd Warikh bin Abd Rashid

     Producing Calcium Copper Manganese Oxide (CaCu3Mn4O12) via Wet Chemistry (precipitation
30                                                                                                   Dr. Mohd Warikh bin Abd Rashid
     technique)
     Effect of Composition of Producing Calcium Copper Manganese Oxide (CaCu3Mn4O12) via
31                                                                                                   Dr. Mohd Warikh bin Abd Rashid
     Solid State Technique
     Effect of Nanofiller (Pristine Montmorillonites and Hydratalcite Lamellar Clays) on Corrosion
32                                                                                                   Dr. Mohd Warikh bin Abd Rashid
     Activities

33   Effect of Nanofilller (Fullerenes and Carbon Black) on Corrosion Activities                     Dr. Mohd Warikh bin Abd Rashid


34   Characterization of Alumina Particle Reinforce Aluminum Alloy Metal Matrix Composite (MMC)        Pn.Intan Sharhida Othman


     The Effect of Micro Alloying of Silver on the Mechanical Properties and Stress Corrosion
35                                                                                                     Pn.Intan Sharhida Othman
     Cracking (SCC) of Aluminum Alloy 7000 (Al-Zn-Mg-Cu System) Series in Aircraft Application


     The Effect of Age Hardening Process on the Mechanical Properties and Stress Corrosion
36                                                                                                     Pn.Intan Sharhida Othman
     Cracking (SCC) of Aluminum Alloy 7000 (Al-Zn-Mg-Cu System) Micoalloyed with Silver


     Study The Effect of Retrogression on Reaging (RRA) Treatments on Microstructure Evolution
37                                                                                                     Pn.Intan Sharhida Othman
     and Mechanical Properties of Aluminum Alloy 7075

     An Investigation of the Effect of Various Heat Treatment Process on Mechanical Properties and
38                                                                                                     Pn.Intan Sharhida Othman
     Microstructure of Aluminum Alloy 7075


     The Effect of Coupling Agent Addition to the Mechanical Properties of Wood Plastic Composite
39                                                                                                     Pn.Intan Sharhida Othman
     (WPC) Made of Recycled High Density Polyethylene (RHPE) and Recycled Wood Flour (RWF)


40   Analysis of the Failure of Honeycomb Core Drum Peel Test                                         En. Mohd Yuhazri bin Yaakob                    Zuraila binti Iberahim (B050710236)   CTRM


41   Wood Plastic Parquet Composite                                                                   En. Mohd Yuhazri bin Yaakob


42   New Technique of Plastic Mould for Thermoset Composite Fabrication                               En. Mohd Yuhazri bin Yaakob


43   Hybrid Composite Using Recycle Plastic Bag                                                       En. Mohd Yuhazri bin Yaakob
44   Soild Fuel From Oil Palm Empty Fruit Bunch Fibre & Recyle Materials                              En. Mohd Yuhazri bin Yaakob


45   Hibiscus Cannabinus L fiber Brick Block                                                          En. Mohd Yuhazri bin Yaakob

                                                                                                                                                                             PROJEK INDUSTRI
BIL TAJUK PROJEK SARJANA MUDA 1 (PSM)                                                                      NAMA PENYELIA            NAMA PENILAI   NAMA PELAJAR (Jika Ada)
                                                                                                                                                                             (Y/T)

46   Oil Palm Empty Fruit Bunch Fiber Brick Block                                                     En.Mohd Yuhazri bin Yaakob

     Effect of Laminated Plastic Matrix in EnviroRecycled-Wood Plastic Composites (eR-WPC) for
47                                                                                                      Dr Jariah Mohamad Juoi
     Structural Application
     Recyling glass into glass ceramic for structural application (CIP method)-Development and
48                                                                                                      Dr Jariah Mohamad Juoi
     characterization
     Recyling glass into glass ceramic for structural application (CIP method)-Development and
49                                                                                                      Dr Jariah Mohamad Juoi
     mechanical testing

     Recyling glass into glass ceramic for structural application (pressing method)-Development and
50                                                                                                      Dr Jariah Mohamad Juoi
     characterization
     Recyling glass into glass ceramic for structural application (pressing method)-Development and
51                                                                                                      Dr Jariah Mohamad Juoi
     mechanical testing
     Effect of milling time in producing Calcium Copper Manganese Oxide (CaCu 3Mn4O12) via solid
52                                                                                                      Dr Jariah Mohamad Juoi
     state technique
                                                                                        JABATAN ROBOTIK
                                                                                                                                                                       PROJEK INDUSTRI
BIL TAJUK PROJEK SARJANA MUDA 1 (PSM)                                                               NAMA PENYELIA             NAMA PENILAI   NAMA PELAJAR (Jika Ada)
                                                                                                                                                                            (Y/T)

1    System Development of Software-based Torque & Force Detection. Prefer: Female            En. Ahmad Yusairi Bani Hashim                                                   T

     Mechanism Development of A Compounded Three-link Manipulator Applied as Prosthetic
2                                                                                             En. Ahmad Yusairi Bani Hashim                                                   T
     Foot. Prefer: Male

3    System Development of An Initiation Sequence Using Fingerprint Technology. (2 person)    En. Ahmad Yusairi Bani Hashim                                                   T

     System Development of An Initiation Sequence Using Face Recognition Technology. (2
4                                                                                             En. Ahmad Yusairi Bani Hashim                                                   T
     person)

5    System Development of Parallel Robot with Industrial Controller. Prefer: Male            En. Ahmad Yusairi Bani Hashim                                                   T


6    System Design & Development of A Microprocessor-based Blender. Prefer: Female            En. Ahmad Yusairi Bani Hashim                                                   T


7    Mechanism Design & Development of A Three-wheeled Mobile Robot. Prefer: Male             En. Ahmad Yusairi Bani Hashim                                                   T


8    Mechanism development of flexible worktable                                                En. Khairol Anuar Rakiman                                                     T


9    Mechanism development of gripper for 5 kg payload                                          En. Khairol Anuar Rakiman                                                     T


10   Pneumatic/hydraulic Labkit using Automation Studio and Visual Basic                        En. Khairol Anuar Rakiman                                                     T


11   Development of Traffic Light Character Display                                             En. Khairol Anuar Rakiman                                                     T


12   Motion Tracking System using Computer Vision with OpenCV Open Source Software                En. Shariman Abdullah                                                       T



13   Computer Added Manufacturing (CAM) Software for a XY Table Positioning System                En. Shariman Abdullah                                                       T

     Haar Classifier for Machine Learning System that can Detect Specified Object in Vision
14                                                                                                En. Shariman Abdullah                                                       T
     System

     Mechanical and Electronics Design for a Differential Drive Mobile Robot with Feedback
15                                                                                                En. Shariman Abdullah                                                       T
     Control

     Design of An Automated Robotic Workstation using Robotic Simulation Software and
16                                                                                                En. Shariman Abdullah                                                       T
     Linking it to Actual Robot via Serial Communication

17   RFID Based of a Smart Mini Market System                                                      En. Lokman Abdullah                                                        T


     Analysis & Development of a Medium Scale Rack for Automated Storage Retrieval System
18                                                                                                 En. Lokman Abdullah                                                        T
     (ASRS)

19   Development of Database System for Automated Storage Retrieval System                         En. Lokman Abdullah                                                        T



20   Development of An Automated Pick and Place Robotic Arm                                        En. Lokman Abdullah                                                        T


     Implementation of Monitoring System In RFID- Based Automated Product Inspection
21                                                                                                 En. Lokman Abdullah                                                        T
     System
                                                                                                                                                 PROJEK INDUSTRI
BIL TAJUK PROJEK SARJANA MUDA 1 (PSM)                                           NAMA PENYELIA           NAMA PENILAI   NAMA PELAJAR (Jika Ada)
                                                                                                                                                      (Y/T)

22   Design and Development of An Automated Fencing System for Comau Robot    En. Lokman Abdullah                                                       T



23   Automated Product Finder System using RFID Technology                    En. Lokman Abdullah                                                       T



24   Database Development of "Kenal Besi" Module                              En. Lokman Abdullah                                                       T


25   Database Development for Computer Aided Production Management (CAPM)       En. Ruzaidi Zamri                                                       T



26   Automatic Sorting System Using Neural Network-Based Image Processing       En. Ruzaidi Zamri                                                       T



27   The Application of Fuzzy Logic for Security System                         En. Ruzaidi Zamri                                                       T



28   The Development of PC Based Online Monitoring System                       En. Ruzaidi Zamri                                                       T



29   The Development of An Expert System for Production Scheduling              En. Ruzaidi Zamri                                                       T



30   Path Planning for Mobile Robot using RFID Technology in Kanban System   En. Mohd Hisham Nordin                                                     T



31   Automatic Box Packaging Machine                                         En. Mohd Hisham Nordin                                                     T



32   Intelligent Multiple Sizes Box Arranger Robot                           En. Mohd Hisham Nordin                                                     T



33   Mobile Robot Dynamic Adjustable Platform Height Suspension System       En. Mohd Hisham Nordin                                                     T



34   Control of Multiple Gantries System Model using Fuzzy Logic Method      En. Mohd Hisham Nordin                                                     T



35   Performance Analysis for Smart Lecturer Room                            Pn. Nur Aidawaty Rafan                                                     T



36   Automated Watering System for Plant                                     Pn. Nur Aidawaty Rafan                                                     T



37   Monitoring System for Automated Plant Watering System                   Pn. Nur Aidawaty Rafan                                                     T



38   Susu-Maker : Controller design for water temperature and dispenser      Pn. Nur Aidawaty Rafan                                                     T



39   Temperature Alert Device for Gas Turbine Generator System               Pn. Nur Aidawaty Rafan                                                     Y



40   Development of Automatic Grass Cutter                                   Pn. Silah Hayati Kamsani                                                   T



41   Development of CAM Analysis Appratus                                    Pn. Silah Hayati Kamsani                                                   T



42   Modelling and Development of DC Motor Speed Controller                  Pn. Silah Hayati Kamsani                                                   T



43   Improvement of Semi-Automated Lemon Grass Cutter                        Pn. Silah Hayati Kamsani                                                   T



44   Development of Mapping System for Autonomous Mobile Device              Pn. Silah Hayati Kamsani                                                   T



45   Control and Monitoring System for Vision-Based Traffic Light            Pn. Silah Hayati Kamsani                                                   T
                                                                                                                                                            PROJEK INDUSTRI
BIL TAJUK PROJEK SARJANA MUDA 1 (PSM)                                                       NAMA PENYELIA          NAMA PENILAI   NAMA PELAJAR (Jika Ada)
                                                                                                                                                                 (Y/T)

46   Robust Tracking Controller for a XY Gantry System                                     Dr Zamberi Jamaludin                                                    T



47   Robust Tracking Controller for a Slider System                                        Dr Zamberi Jamaludin                                                    T



48   Study of Friction Behaviour and Its Compensation in an XY Gantry System               Dr Zamberi Jamaludin                                                    T



49   Design and Development of A Self-Balancing Two-Wheel Car                              Dr Zamberi Jamaludin                                                    T



50   Design and Development of Receiving and Retrieval System for Existing Mobile Robot    Dr Zamberi Jamaludin                                                    T



51   Developing An Existing Mobile Robot as Security Agent                                 Dr Zamberi Jamaludin                                                    T



52   Control System Development for a a Differential Drive Mobile Robot                    Dr Zamberi Jamaludin                                                    T



53   Design and Development of Autonomous Robot using Color Sensor                        Pn. Syamimi Shamsuddin                                                   T



54   Design and Development of Manual Robot using Mecanum Wheels                          Pn. Syamimi Shamsuddin                                                   T



55   Design and Development of Autonomous Robot with Mecanum Wheel                        Pn. Syamimi Shamsuddin                                                   T



56   Wireless PC-Based Control of Robot Slider                                            Pn. Syamimi Shamsuddin                                                   T



57   Control of 6-DC Motors using PLC and Touch Screen Technology                         Pn. Syamimi Shamsuddin                                                   T



58   Monitoring System for Siemens PLC Conveyor                                           Pn. Syamimi Shamsuddin                                                   T
                                                                                  JABATAN REKABENTUK
                                                                                                                                                                      PROJEK INDUSTRI
BIL TAJUK PROJEK SARJANA MUDA 1 (PSM)                                                              NAMA PENYELIA             NAMA PENILAI   NAMA PELAJAR (Jika Ada)
                                                                                                                                                                           (Y/T)
     Design for Enivironment (DFE) Improvement on Electronic Product: A Case Study on a
1                                                                                               En. Tajul Ariffin Abdullan
     Hand Phone

2    Design for Enivironment (DFE) Analysis on Office Furniture: A Office Chair                 En. Tajul Ariffin Abdullan


3    Develop Product Sustainability Improvement for Automotive Part: A Car Wiper                En. Tajul Ariffin Abdullan

     Use Design for Manufacturing and Assembly (DFMA) methodology to Analyze Car Pad
4                                                                                               En. Tajul Ariffin Abdullan
     Lock System

5    Design and Develop Recycle Unit for Home Use: A Dustbin                                    En. Tajul Ariffin Abdullan

     Use Knowledge Base (KB) to Select the Optimum Design Based on Design for
6                                                                                               En. Tajul Ariffin Abdullan
     Environment (DFE) Approach

7    Development of Medical Product through Design for Environment (DFE) Methodology            En. Tajul Ariffin Abdullan

     Use Design for Environment (DFE) and Product Sustainability Application to Improve
8                                                                                               En. Tajul Ariffin Abdullan
     Design of Home Appliance: A Case Study on Electronic Iron

     Design Improvement of Jig and Fixtures for Trimming Workstation for Aerospace Industry
9                                                                                               En. Tajul Ariffin Abdullan
     Based on Ergonomics Analysis: Case Study at CTRM AC Sdn Bhd

10   Design and Analysis of Autoclave Mould for Carbon Fiber Reinforced Spoiler                     En. W.Sapto W.


11   Design and Manufacturing of Pneumatic Punching Tool                                            En. W.Sapto W.

     Comparison Study of Press Part Quality Inspection System: Checking System and FARO
12                                                                                                  En. W.Sapto W.
     Arm laser Scanner

13   Design of Smart Safety Device for Stamping Press Machine using Infra Red Camera                En. W.Sapto W.

     Study on the Effect of the Design of Machining Parameter to Surface Roughness of the
14                                                                                                  En. W.Sapto W.
     Aluminum Alloy 7075 using Design of Experiment (DOE)

15   Rapid Prototyping on Biomanufacturing                                                    En. Abd Halim Hakim Abd Aziz


16   Parametric CAD Modelling of a Human Spine                                                En. Abd Halim Hakim Abd Aziz


17   Product Development of Semi Automatic Slump Test                                         En. Abd Halim Hakim Abd Aziz


18   StudyStudy of Sharp Edge Cutting in Wire EDM                                             En. Abd Halim Hakim Abd Aziz


19   Rapid Prototyping Process Optimization                                                   En. Abd Halim Hakim Abd Aziz


20   Product Development using Concurrent Engineering                                           En. Abd Rahim Samsudin


21   Design Improvement of a Portable Hose Reel                                                 En. Abd Rahim Samsudin
                                                                                                                                                                    PROJEK INDUSTRI
BIL TAJUK PROJEK SARJANA MUDA 1 (PSM)                                                             NAMA PENYELIA            NAMA PENILAI   NAMA PELAJAR (Jika Ada)
                                                                                                                                                                         (Y/T)

22   Design and Development of an Adjustable Stand                                             En. Abd Rahim Samsudin


23   Design and Development of a Portable Car Shade using DFMA Methodology                     En. Abd Rahim Samsudin


24   Design and Development of a Wardrobe Cloth Hanger using QFD Methodology                   En. Abd Rahim Samsudin


25   Design and Development of a Smart Kitchen Bin                                             En. Abd Rahim Samsudin


26   Anti Theft Motorcycle Device                                                              En. Abd Rahim Samsudin


27   E-recycle System Model: A Study on Plastic, Paper and Disc                                En. Saifudin Hafiz Yahaya


28   Rack and Pinion Gear System using CAD Tool                                                En. Saifudin Hafiz Yahaya


29   Helical Gear System using CAD Tool                                                        En. Saifudin Hafiz Yahaya


30   Spur Gear System using CAD Tool                                                           En. Saifudin Hafiz Yahaya


31   Surface Modeling on a Ship Hull Design                                                    En. Saifudin Hafiz Yahaya


32   Design and Analysis for Cast Metal Matrix using CAD Tool                                         En. Taufik

     Design and Analysis of Drilling Rig Mechanical Arrangement and Construction using CAE
33                                                                                                    En. Taufik
     Software

34   Design and Analysis of Casting Mould using CAD Tool                                              En. Taufik


35   Design and Analysis of Production Tool by Casting Tehcnology                                     En. Taufik


36   Design Rules for Casting Process using CAD Tool                                                  En. Taufik


37   Design Improvement of Turbocharger using Computational Fluid Dynamic (CFD)                       En. Taufik


38   Design Improvement of Solar Grass Cutter using DFMA Methodology                                  En. Taufik


39   Development of a Personal Transporter for Warehousing Apllications                            En. Hassan Attan

     Development of Multifunction Octagonal Bottle Cap using Analytical Hierarchical Process
40                                                                                                 En. Hassan Attan
     (AHP)

41   Design Improvement using DFMA                                                                 En. Hassan Attan


42   Development of Thin Shrink Small Outline Plastic (TSSOP) Package Dedicated Fixture            En. Hassan Attan


43   A Study on The Structural Integrity of Octagonal Shape Bottle Blow Mould Design               En. Hassan Attan


44   A Quality Study on Rapid Tooling in Gearknob Design                                           En. Hassan Attan


45   Low Cost Home Water Heating System: Design and Anlysis                                          Dr. Sugumar
                                                                                                                                                               PROJEK INDUSTRI
BIL TAJUK PROJEK SARJANA MUDA 1 (PSM)                                                          NAMA PENYELIA          NAMA PENILAI   NAMA PELAJAR (Jika Ada)
                                                                                                                                                                    (Y/T)

46   Low Cost Home Water Heating System: Fabrication and Evaluation                              Dr. Sugumar


47   Design, Analysis and Fabrication of Polymer Based Orthopaedic Casting                       Dr. Sugumar


48   Thermal Analysis of Polymerase Chain Reaction (PCR) Chips                                   Dr. Sugumar


49   Design, Analysis and Fabrication of a Novel Exercise System for Stroke Patients             Dr. Sugumar


50   Investigation of Material for a Dust Cover Die (Rubber)
                                                                                            En. Baharudin Abu Bakar

51   Dust Cover Die Design
                                                                                            En. Baharudin Abu Bakar

52   Design and Analysis of Proton MPV Bumper Robot Jig
                                                                                              En. Ismail Abu Shah

53   Design and Analysis of Dodol Stirring Machine
                                                                                              En. Ismail Abu Shah
     Structural Analysis of Cutting and Slicing Operations of Food Composite using Finite
54
     Element Method                                                                           En. Ismail Abu Shah

55   The Improvement of Toyota Car Key Design using Finite Element Method
                                                                                              En. Ismail Abu Shah

56   Design and Analysis of Workholding Device of an Assembly Operation
                                                                                              En. Ismail Abu Shah

57   Design and Analysis of Drill Jig for Sheet Metal Part
                                                                                              En. Ismail Abu Shah

58   Design and Development of Nasi Lemak Wrapper
                                                                                              En. Ismail Abu Shah

59   Design and Analysis of a Family Mould using Silicon Based Materials                     En. Zolkarnain Marjom


60   Design Validation and Fabrication of Keris Injection Mould                              En. Zolkarnain Marjom

     Determination of Optimum Parameters for Keris Injection Moulding Process using DOE &
61                                                                                           En. Zolkarnain Marjom
     Plastic Mould Analysis

62   Determination of the Optimum Design Parameters for a Family Mould                       En. Zolkarnain Marjom


63   DFMA Analysis og Jig and Features for an Assembly Line Components                       En. Zolkarnain Marjom


67   Optimization of Disc Brake Performance                                                 Pn. Nurazua Mohd Yusop


68   "Susu" Maker; Exterior Design and Milk Powder Dispenser                                Pn. Nurazua Mohd Yusop


69   An Improvement on "Press Machine" for Disposable PET Bottle                            Pn. Nurazua Mohd Yusop


70   Design analysis of Bearing for Automotive Application                                  Pn. Nurazua Mohd Yusop


71   "Susu" Maker; Exterior Design and Milk Powder Dispenser                                Pn. Nurazua Mohd Yusop


72   Design and Development of an Economical Power Transmision System                       Ir. Sivarao Subramonian
                                                                                                                                                                PROJEK INDUSTRI
BIL TAJUK PROJEK SARJANA MUDA 1 (PSM)                                                          NAMA PENYELIA           NAMA PENILAI   NAMA PELAJAR (Jika Ada)
                                                                                                                                                                     (Y/T)

73   Performance and Design Analysis of KR-150 Mounted Beach Bike                            Ir. Sivarao Subramonian


74   Design and Analysis of Go-Kart / Beach Bike                                             Ir. Sivarao Subramonian

     A Performance Evaluation Study of 3D Laser Scanners on Portable Coordinate Measuring
75                                                                                          En. Mohammad Kamil Sued
     Machine (CMM)-FARO Arm in Metrology Field
                                                                            JABATAN PENGURUSAN
                                                                                                                                                          PROJEK INDUSTRI
BIL TAJUK PROJEK SARJANA MUDA 1 (PSM)                                                    NAMA PENYELIA           NAMA PENILAI   NAMA PELAJAR (Jika Ada)
                                                                                                                                                               (Y/T)

1    LEAN MANUFACTURING AT A COMPOSITE MANUFACTURING FACILITY                          Pn. Rohana Bt. Abdullah                  MOHD. NUR BIN HASSAN            YA


2    PRODUCTIVITY IMPROVEMENT AT A MANUFACTURING FACILITY: A CASE STUDY I              Pn. Rohana Bt. Abdullah                  NURALESYA BT RAMLEE             YA

     DEVELOPMENT OF A PERFORMANCE MEASUREMET SYSTEMS AT AN AEROSPACE
3                                                                                      Pn. Rohana Bt. Abdullah                                                  YA
     MANUFACTURING FACILITY

4    PRODUCTIVITY IMPROVEMENT AT A MANUFACTURING FACILITY: A CASE STUDY II             Pn. Rohana Bt. Abdullah                                                  YA

     A STUDY ON THE EFFCTIVENESS OF THE KEY PERFORMANCE INDICATORS (kpi)
5                                                                                      Pn. Rohana Bt. Abdullah                                                  YA
     IMPLEMENTATION AT THE AEROSPACE MANUFACTURING INDUSTRY

6    BIDDING FOR A CONSTRUCTION PROJECT                                                Prof. Madya DR. Khaled


7    THE TAGUCHI LOSS FUNCTION: A SIMULATION APPROACH                                  Prof. Madya DR. Khaled


8    SEQUENCING OF JOBS ON A SINGLE MACHINE                                            Prof. Madya DR. Khaled


9    PROJECT MANAGEMENT : A SIMULATION APPROACH                                        Prof. Madya DR. Khaled


10   BUFFER SIZE AND LOCATION                                                          Prof. Madya DR. Khaled


11   SCHEDULING BATCHES OF INCOMPATIBLE JOB FAMILIES                                   Prof. Madya DR. Khaled

     SUSTAINABILITY OF NEWLY LAUCHED PRODUCT: A DECISION ANALYSIS
12                                                                                     Prof. Madya DR. Khaled
     APPROACH
     IMPLEMENTATION OF CYCLE TIME REDUCTION STRATEGIES FOR A
13                                                                                       Prof. Madya Chong
     MANUFACTURING COMPANY

14   SIMULATION OF OPERATION IN AUTOMOTIVE SERVICE CENTER                                Prof. Madya Chong


15   ASSEMBLY LINE BALANCING PROBLEM USING ANT COLONY OPTIMIZATION                       Prof. Madya Chong


16   INTERACTIVE WEB-BASED ASSEMBLY LINE BALANCING ADVISOR                               Prof. Madya Chong


17   PARTICLE SWARM OPTIMIZATION IN THE ASSEMBLY LINE BALACING PROBLEM                   Prof. Madya Chong


18   CAPACITY PLANNING MODEL IN A MANUFACTURING COMPANY                                  Prof. Madya Chong

     A Human Factors Assessment on Assembly Workstation: A case study at Electronic
19                                                                                       Prof. Madya Dr. Adi
     Industry

20   Mathematical Modeling of Accidents at Toll Road using Multiple Regresion Method     Prof. Madya Dr. Adi


21   Time Series Forecasting of Accidents in Toll Road                                   Prof. Madya Dr. Adi
                                                                                                                                                                       PROJEK INDUSTRI
BIL TAJUK PROJEK SARJANA MUDA 1 (PSM)                                                                NAMA PENYELIA            NAMA PENILAI   NAMA PELAJAR (Jika Ada)
                                                                                                                                                                            (Y/T)

22   Optimizing production cost at Manufacturing Industry using Linear Programming Methods           Prof. Madya Dr. Adi


23   Optimizing number of Booths: Case study at Post Offfice                                         Prof. Madya Dr. Adi


24   An Assessment of Queueing Systems at General Hospital                                           Prof. Madya Dr. Adi


25   Job shop scheduling in manufacturing industry                                                Dr. Noor Ajian Mohd. Lair


26   Flow shop scheduling in manufacturing industry                                               Dr. Noor Ajian Mohd. Lair


27   Forecasting of demands for SMI                                                               Dr. Noor Ajian Mohd. Lair


28   Optimising facilities layout in SMI I                                                        Dr. Noor Ajian Mohd. Lair


29   Optimising facilities layout in SMI II                                                       Dr. Noor Ajian Mohd. Lair


30   Evaluation of interactive SPC software implementation                                        En. Ab Rahman Mahmood                                                       YA


31   Development of interactive machining process design and cycle time calculation               En. Ab Rahman Mahmood                                                       YA


32   Optimization of line balancing- case study of brake disc line for Proton BLM model           En. Ab Rahman Mahmood                                                       YA


33   Design and development of low cost table lifter for furniture industry                       En. Ab Rahman Mahmood                                                       YA

     Correlation between production yield, efficiency, reject rate, number of operators, gender
34                                                                                                En. Ab Rahman Mahmood                                                       YA
     and working shift for a production line - a cost-bennefit and product quality analysis

35   Optimization of turning process of thin cylinder                                             En. Ab Rahman Mahmood                                                 YA-Proj In-house

     Dimensional accuracy of hole on irregular surface geometry as a result of machining
36                                                                                                En. Ab Rahman Mahmood                                                 YA-Proj In-house
     process (a DOE approach)

37   The impact of ERP systems on manufacturing industries process performance                    Cik. Muzalna Mohd Jusoh                                                    Tidak

     Relationships between implementation of TQM, JIT and TPM and manufacturing
38                                                                                                Cik. Muzalna Mohd Jusoh                                                    Tidak
     performance

     Use mathematical modeling to give an extra boost of TPM implementation in FKP's
39                                                                                                Cik. Muzalna Mohd Jusoh                                                    Tidak
     laboratory

40   Quality optimization in the manufacturing industry: An application case                      Cik. Muzalna Mohd Jusoh                                                    Tidak


41   Determining the importance of supplier selection process in manufacturing: a case study      Cik. Muzalna Mohd Jusoh                                                    Tidak

     Quality Design of Manufacturing Process in Electronic Line Assembly By using FMEA and
42                                                                                                 Pak Hasoloan Haery I.P                                                     YA
     QFD

43   Quality Performance Measurement of Employee Capabilities in the Manufacturing Industry        Pak Hasoloan Haery I.P

     Quality Analysis and Improvement in Service Industry By using SERVQUAl and Kano
44                                                                                                 Pak Hasoloan Haery I.P                                                     YA
     Diagram

45   Quality Design and Improvement of Consumer Product By using TRIZ Concept                      Pak Hasoloan Haery I.P                                                     YA
                                                                                                                                                                            PROJEK INDUSTRI
BIL TAJUK PROJEK SARJANA MUDA 1 (PSM)                                                                    NAMA PENYELIA             NAMA PENILAI   NAMA PELAJAR (Jika Ada)
                                                                                                                                                                                 (Y/T)

46   Quality Process Improvement by using Taguchi Method in the manufacturing process                  Pak Hasoloan Haery I.P                                                     YA


47   Lean process analysis and quality improvement in the service industry                             Pak Hasoloan Haery I.P                                                     YA


48   Analysis of Human Industrial Behavior in Manufacturing Industry by Using Socionic Method          Pak Hasoloan Haery I.P                                                     YA


49   Basic of Total Preventive Maintenance System at Manufacturing Process.                     En. MOHD SOUFHWEE BIN ABD RAHMAN


50   Work Study of wire Assy process at Eimei Electric (M) Sdn. Bhd. (Bemban - Melaka).         En. MOHD SOUFHWEE BIN ABD RAHMAN


51   Internal customer satisfaction in manufacturing company. A Case study                              Cik. Zarina bt Maarip


52   Study of manufacturing waste in SMI by using LEAN MANUFACTURING concept                            Cik. Zarina bt Maarip

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:486
posted:3/15/2010
language:Malay
pages:19