Technical Bulletin SAMEDAYTM GROUT SEALER DESCRIPTION AQUA MIX SAMEDAY GROUT by banger18

VIEWS: 0 PAGES: 1

									                                                        .
                                                                                                        Technical
                                                                                                         Bulletin

                                              SAMEDAYTM GROUT SEALER

DESCRIPTION:                                                                     FOR PRE-GROUTING APPLICATION:
AQUA MIX SAMEDAY™ GROUT SEALER is a no-sheen, natural look, water-               Apply over clean stone or tile a minimum of 2 hours prior to grouting - follow
based, non-flammable, aerosol sealer especially formulated for grout. This       application procedures above.
innovative spray is a quick and easy way to apply a grout sealer without the
need to wait until the grout has cured. SameDay Grout Sealer can be applied as   MAINTENANCE:
soon as 2 hours after grouting – making sealing an efficient, economical         • Aqua Mix Concentrated Stone & Tile Cleaner, is recommended for routine
process. Allows moisture vapor transmission.                                       cleaning.

USES:                                                                            TECHNICAL ASSISTANCE:
Recommended for use on:                                                          Call 877-278-2311, Monday through Friday, 6:00 a.m. to 4:30 p.m. or Saturday,
• Use on cementitious sanded and unsanded porous grout joints for ceramic tile   7:00 a.m. to 12:00 p.m. Pacific Time.
  installations.
• Effective for interior and exterior applications.                              LIMITATIONS:
                                                                                 • Do not allow sealer to come in contact with any non-recommended surface.
COVERAGE:                                                                        • May slightly lighten or darken some surfaces.
Approximately 300 to 500 sq. ft. (28 m2 to 46 m2) per 15-oz. can (444 ml),       • Sealer will not prevent surface wear or etching from acids or caustic chemicals.
depending on size and porosity of grout joint, temperature, humidity, and
method of application.                                                           HANDLING AND STORAGE:
                                                                                 • Close container tightly after each use.
EXPECTED WEAR:                                                                   • Store in original container only.
• Will vary depending on hardness and texture of grout, type of area, surface    • Store and use between temperatures of 50 ºF and 80 ºF (10 ºC and 27 ºC).
  wear, frequency, and type of maintenance products used.                        • Unused, stored product is freeze-thaw stable.
• The expected wear is up to 3 years.
• Weather conditions, harsh cleaning methods, and high-alkaline, acidic, or      CAUTION:
  solvent-based cleaners will affect wear.                                       • KEEP OUT OF REACH OF CHILDREN.
                                                                                 • Do not puncture or incinerate container.
TEST A SMALL AREA:                                                               • Do not expose to temperatures above 120 ºF (49 ºC).
According to application instructions with a 24-hour cure time to determine      • During spray application, avoid inhaling mists. A NIOSH-approved respirator
desired results. Test for stain repellency using likely contaminants.              is recommended if spraying large amounts of material for prolonged time in
                                                                                   confined areas.
APPLICATION:                                                                     • Gloves should be worn during application.
1.) Read entire label before using.                                              • IF INGESTED: Do not induce vomiting. Drink 1 to 2 glasses of water.
2.) SHAKE WELL before using.                                                     • EYE AND SKIN CONTACT: Flush thoroughly with water. If irritation
3.) For new installations, sealer can be applied as soon as 2 hours after          persists, seek medical attention.
     grouting.
4.) Grout joints must be clean, dry, and free of existing sealers or coatings.   WARRANTY:
5.) Invert can and point nozzle toward the grout, keeping nozzle 10”-16” (25     SATISFACTION GUARANTEED. If not completely satisfied with this product’s
     cm to 41 cm) from the surface.                                              performance, when used as directed, contact Aqua Mix for exclusive remedy
6.) Depress nozzle and spray along grout lines. Some sealer will get on the      of either refund of purchase price or replacement of product upon return of
     tile, which will evaporate without the need to wipe dry. NOTE: Be sure      unused portion with proof of purchase within one year of purchase.
     any sealer that does not penetrate surface is removed from surface          Determining suitability of product for any intended purpose shall be solely the
     within 5 mminutes of application using absorbent paper or cotton            responsibility of the user. THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED,
     towels.                                                                     INCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR PARTICULAR
7.) If 2 or more coats are applied, allow a minimum of 30 minutes drying time    PURPOSE, WHICH EXTEND BEYOND THE DESCRIPTION ON THIS LABEL. IN NO
     between coats. Be careful not to directly rub fresh grout if sealer is      EVENT SHALL AQUA MIX BE LIABLE TO THE CUSTOMER OR ANYONE ELSE
     applied same day as grout.                                                  FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, HOWEVER OCCASIONED.
8.) After 2 hours conduct a test to determine if surface is completely sealed    ALWAYS TEST FIRST.
     by applying water droplets to the surface. If water is absorbed, apply an
     additional coat. Wait 2 hours and repeat the test.
9.) Ready for surface traffic 2 hours after final coat. Keep area dry for 12
     hours. Achieves full cure in 24 hours.
10.) May be reapplied as needed to grout joints that are clean.




             250 Benjamin Drive        •   Corona, CA 92879         •   951-256-3040      •    951-256-3050 fax          •    www.aquamix.com

								
To top