Docstoc

Katalog_ADE_Overview

Document Sample
Katalog_ADE_Overview Powered By Docstoc
					    Analog & Digital Engineering / Dipl.Ing. Helmut Fink
    Johann Strauss Gasse 8 -III –21, A-8010 Graz / Austria / Europe
    helmut.fink-ade@aon.at            +43(0)699 1994 3083
    http://members.aon.at/ade-fink/                                                           Analog & Digital Engineering
                                                                                                - Dipl. Ing. Helmut Fink




PRODUCT – & SERVICES–CATALOGUE                                                                                 SE(1)
     KIND OF SERVICES IN ELECTRONICS & MECHATRONICS


   Product Development Electronics / Mechatronics / Automation
     Hardware Design of complete units (circuit design and layout, analog- and digital design – also high
      frequency and power design, simulations, adaptions, interfaces)
     System Analysis, System Installations, Conception (control-, sensor concept, tolerance
      inspection, etc.)
     Circuit Design
     Simulation (PSpice, MatLab, Simulink, DSP-algorithms)
     Printed Circuit Board -Design
     Prototyping, assembly, build, complete assembly in casing, case design and construction
     close Cooperation with Industrial Designer, also mold design
     ASIC -Design-Support
     EMC - Services, Security Relevant Support
     Patent Law - Technical Support
     Specific search for electronic parts which should replace obsolete ones, redesigns required because
      of undeliverable parts
     Transition of already developed product into mass production, also in Far East


   Software Development
       Assembler (uC, DSP's), C (Visual Basic, LabView, etc.), some High Level Languages, SPS IEC
        1131, etc.
       Structure concepts, networks, Visualisation (LabView)
       Feasibility studies, Simulation


   Project Planning – Project Management
     Specification creation
     Creation of development strategies with respect and control of the given project-schedule
     Milestone - definitions
     Project coordination, Project management, Research projects
     Feasibility studies
     Concept study, also with help of prototype- models and -samples
     System-, quality analysis, FMEA-evaluation, MTBF-calculation
     Map out of Sales Adaption Concepts
     Creation and Managing of Development Teams direct at the customers and Creation of a
      Suppliers Network


   Documentation
     Preparation of technical documentations, like development related papers, circuit diagrams, service-,
      application-, training- and maintenance documents and material, instruction- operating manuals
     Presentations, seminars, workshops, training
     Support at Standardisation-, Approval- and Security Procedures
     Internet-, Web-Design
     Photographic preparation, -docu



  2005 - 2015 ADE                                         Catalogue English Short Form [ 112A8 ] / page 1 of 8
                                                                                              Analog & Digital Engineering
                                                                                                - Dipl. Ing. Helmut Fink




        Engineering Example:
                  Product Development including Simultaneous Engineering
                                                                                       Development -
                                                                                           Risk




                          Concept




                                                Construction




                           Trials /Proto
  P           F
  R           M
  O           E
  J           A
  E                                         Production-
                    CIP                      planning /
  C
  T                                        Transition to
  M                                            Mass
                                           Product./KHT         CIP
  A
  N
  A
  G.



                                     Ready For Market




                                           Post Project-
                                           Management           CIP




                                                           CIP = continuous improvement process




 2005 - 2015 ADE                                     Catalogue English Short Form [112A8 ] / page 2 of 8
                                                                                                    Analog & Digital Engineering
                                                                                                      - Dipl. Ing. Helmut Fink




PRODUCT – & SERVICES–CATALOGUE                            SA(2)
KIND OF SERVICES IN AUTOMATION SERVICES, SPEC.MECH.ANICAL ENG.


   Automation and Plant Conception
     Conception, Control Engineering, System Analysis, Measurement Technique
     Motive Power Engineering, Control- (Regulation-) Techniques, (Servo..), automation, robotics
      => special-solutions –niche products
     Mechanical Engineering and construction together with partner companies (special)- mechanical
      engineering => an extensive palette of flexible construction and design possibilities will be available
     EMC - Services, Security Relevant Support
     Patent Law - Technical Support



   Software Development
     Assembler uC, DSP up to High Level Languages (C, Visual Basic, LabView, etc.), structure concepts,
      networks
     SPS-programming, var. SPS, like Siemens Simatic S7, Matsushita, and similar, also according to
      IEC 1131-3, etc.
     Project planning -motive power engineering -servo drives
     Visualisation (e.g. LabView), alarm-concepts via SMS
     Feasibility studies
     Simulation
     Approvals



   Project Planning – Project Management
       Specification creation
       Creation of development strategies with respect and control of the given project-schedule
       Milestone - definitions
       Project coordination, Project management, Research projects
       Feasibility studies
       Concept study, also with help of prototype- models and -samples
       System-, quality analysis, FMEA-evaluation, MTBF-calculation
       Map out of Automation Concepts -Strategies for Field Bus Structures, etc.
       Creation and Managing of Development Teams direct at the customers and Creation of a
        Suppliers Network



   Documentation
     Preparation of technical documentations, like development related papers, circuit diagrams, service-,
      application- and training material, instruction- operating manuals
     Support at Standardisation-, Approval- and Security Procedures
     Presentations, seminars, workshops, training
     Internet-, Web-Design
     Photographic preparation, -documentation




  2005 - 2015 ADE                                          Catalogue English Short Form [112A8 ] / page 3 of 8
                                                                                                     Analog & Digital Engineering
                                                                                                       - Dipl. Ing. Helmut Fink




PRODUCT–CATALOGUE
          PRODUCT EXAMPLES – custom specific                                                                       PR(1)



   Audio / High Frequency / Video

           20 bit AD/DA Mixer System, fully digital with Sharc-DSP's for Theatre-Free-Air-Stages together
            with company MAXXOM (Graz), e.g. installed at the Bregenzer Festspiele,
            www.bregenzerfestspiele.com/
           Announcement Systems with dynamic background elimination
           Audio distribution Systems, digital controlled microphone amplifier
           Audio /Multimedia DSP-Interface
           Echo-Canceler system (for Audio/Video-Conferencing)
           HighEnd amplifier, simulation, optimization, prototyping, design (including case design /
            construction)
           Animal voice presentation for a nature reserve (digital controlled MP3 player)




           Digital high frequency receiver stages (also RF), DSP-algorithms
           433.92 / 868.35 MHz Data Transmission Systems




           compressed wireless data transmission, via special DSP-algorithms
           Video-Crosspoint -System, video signal -distribution
           high speed (GBit) Serializer / Deserializer for measurement applications (serial high speed data
            link)




  2005 - 2015 ADE                                           Catalogue English Short Form [112A8 ] / page 4 of 8
                                                                                                      Analog & Digital Engineering
                                                                                                        - Dipl. Ing. Helmut Fink




PRODUCT–CATALOGUE
          PRODUCT EXAMPLES – custom specific                                                                        PR(2)



   Telecom / HF / Medicine / Consumer / Household Electronics

           Wireless (433 MHz) telephone-bell-distribution
           Security-, Alarm - Protection System, with wireless message transfer
           Fire- (Smoke-), Movement Indicator (correlating, redundant measurement and therefore very
            robust)
           Wireless Telephone -Headsets




           Phone priority switch (with current loop detection)
           Telecom remote controlled Equipment with wireless feedback
           Biometric sensors - ASIC for data acquisition
           Speech Recognition, -Reproduction ("Memo-Box")
           Weather Station
           Oven Regulation (temperature behaviour regulation according to a dynamic characteristic)
           Manual Dialer (ASIC-project)




           Motor Regulation for Household Equipment, digital Motor Test Systems
           Stepper Motor Controller
           Accu - Charger Systems (also for NiMH, including accurate -dU/dt-switch off, nevertheless a
            low cost design), e.g. for digital camera
           DC/DC Converter designed as car-adapter for digital cameras as well as DC/AC converter
           Conversion of existent uC-Designs with Analog Parts into ASIC, project coordination,
            definition and complete of specifications, measurements




  2005 - 2015 ADE                                            Catalogue English Short Form [112A8 ] / page 5 of 8
                                                                                                    Analog & Digital Engineering
                                                                                                      - Dipl. Ing. Helmut Fink




PRODUCT–CATALOGUE
          PRODUCT EXAMPLES – custom specific                                                                      PR(3)



   Industrial Electronics, Control-, Regulation Technique

           Temperature Controller for molding machines
           Inductive-, optical approximation sensors
           ultrasonic proximity sensors (low cost)
           Industrial Control Electronics via fieldbus for transporting- and consignment plant
           Traffic Process Control Technique (traffic light control), signalling system
           Control-, Regulation Techniques (process control)
           Gastronomy Equipment and Accessories
           Agriculture Techniques - Control Equipment




PRODUCT–CATALOGUE
          PRODUCT EXAMPLES – custom specific                                                                      PR(4)



   Measurement Technique

           Highly precise Temperature Measurement
           High precision Data Logger
           Gas-, Pressure Analyzing Measurement Equipment
           DSP-Algorithms
           ISDN-Measurement Equipment (for primary rate ...data protocol)
           Test Equipment and Control for Product Lifetime Measurements
           Audio-Measurement Technique - equipment and Procedures (intermodulation weighting)
           Measurement Stations - Visualisation
           Sensor development for the automation (proximity detection with low cost ultrasonic sensors)
           High speed (GBit) Serializer / Deserializer for measurement applications (serial high speed data
            link)
           Interface converter




  2005 - 2015 ADE                                          Catalogue English Short Form [112A8 ] / page 6 of 8
                                                                                                   Analog & Digital Engineering
                                                                                                     - Dipl. Ing. Helmut Fink




PRODUCT–CATALOGUE
          PRODUCT EXAMPLES – custom specific                                                                     PR(5)



   Automation

         Industrial Control with Servomotor and SPS for automatic feeding of flat steel




           Development of a CNC-Edge Cutting Facility
           Control-, Regulation Techniques
           Automation Systems, Visualisation
           Warehouse-, Conveyor Systems (printed circuit board feeding system)
           Freight Elevator Controlling System
           Frequency Converter Control, with SPS, visualisation and control panel (e.g. for horse training
            equipment)




  2005 - 2015 ADE                                         Catalogue English Short Form [112A8 ] / page 7 of 8
                                                                                               Analog & Digital Engineering
                                                                                                 - Dipl. Ing. Helmut Fink




PRODUCT – & SERVICES–CATALOGUE
                  REFERENCES                                                                                RD(1)



   References – Short Extraction
        Shure - Heilbronn (GER) / Chicago (USA)
        Eudora - Wels (AUT)
        WESTAR - Manila (Philippinen)
        Resch & Frisch - Wels
        Philips - ICAP Wien (AUT) / Hong Kong
        TGW - Wels
        Seidel - Deutschlandsberg (AUT)
        Maxxom - Graz (AUT)
        TEUP - Deutschlandsberg / Ketten-Wulf (BRD)
        RAZ - Ferlacher Förderketten (AUT)
        Steyr-Daimler-Puch - Graz
        EFKON - Graz / Taipei (Taiwan)
        Kupa - Graz
        Glock - Salzburg (AUT)
        Trodat - Wels
        Masterbrain - Graz
        Naturpark Sparbach - Stiftung Fürst Liechtenstein (AUT)
        Beko – Linz (AUT)
        ...




  2005 - 2015 ADE                                     Catalogue English Short Form [112A8 ] / page 8 of 8

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:16
posted:3/11/2010
language:German
pages:8