Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out

of Dr. Baldev Raj Distinguished

VIEWS: 501 PAGES: 67

									                     Cita




                    of

             Dr. Baldev Raj

        Distinguished Scientist

                     &

                Director

Indira Gandhi Centre for Atomic Research

              Kalpakkam




           Source: Web of Science
                                               Citation Report of Dr. Baldev Raj
                                                              (1989 - 2008)


                        Published Items in Each Year                                                Citations in Each Year




                                                                        No. of Times Cited
No. of Papers




                                     Years                                                                    Years
                                                 Source: Web of Science (Mar.2009)

                                  Sum of Times cited                                          -      1258
                                  Total Citing articles (incl. self-citation)                 -        885
                                  Total Citing articles (without self-citation)               -        658
                                  Average citations per item                                  -      3.72
                                  h-Index                                                     -      15
                                  Journal Articles with citations > 11                        -      35
                                  Note: Citations for books authored / edited                could not be assessed.

                                                        A FEW HIGHLIGHTS

                1. S. Bagavathiappan, T. Saravanan, John Philip, T. Jayakumar, Baldev Raj, R. Karunanithi, T.M.R.
                   Panicker, M. Paul Korath and K. Jagadeesan, Investigation on peripheral vascular disorders using
                   thermal imaging technique, British Journal of Diabetes & Vascular Disease 8(2), 2008; also selected by
                   Medscape, a popular medical magazine published by MedEd, UK.

                2. S Dhara, C-Y. Lu, K.G.M. Nair, k-H.C, C-P.Chen, Y-F.Huang, C.David, L-C.Chen and Baldev Raj,
                   Mechanism of bright red emission in Si nanoclusters. 2008; Nanotechnology 19, pp.1-5

                3. Kumar A, Jayakumar T, Rao CB, Sharma GK, Rajkumar KV, Raj B, Arundhati P., Nondestructive
                   characterization of musical pillars of Mahamandapam of Vitthala Temple at Hampi, India. Journal of
                   Acoustical Society of America, 2008, 124(2), pp.911-917; also selected by Physics Today (a significant
                   achievement), September 18, 2008.

                4. John Philip, P.D. Shima and Baldev Raj, 2008, Evidence for enhanced thermal conduction through
                   percolating structures in nanofluids, Nanotechnology, 19, 2008; also selected by Nanotechweb, Aprril 4,
                   2008.
                               Citations of Dr. Baldev Raj
                             Distinguished Scientist & Director, IGCAR

1.      V. Moorthy, S. Vaidyanathan, T. Jayakumar and Baldev Raj
        On the influence of tempered microstructures on magnetic Barkhausen emission in ferritic
        steels, Philosophical Magazine A-Physics of Condensed Matter Structure Defects and
        Mechanical Properties 77 (6): 1499-1514 JUN 1998

        Times Cited (without Self Citation): 20                                Times Cited: 35

1_1.        Magnetic Barkhausen emission measurements for evaluation of material properties in
            gears
            Moorthy V, Shaw BA
            NONDESTRUCTIVE TESTING AND EVALUATION             Vol.23(4), 317-347, 2008

1_2.        Davut K, Gur CH
            Monitoring the microstructural changes during tempering of quenched SAE 5140 steel
            by magnetic barkhausen noise
            JOURNAL OF NONDESTRUCTIVE EVALUATION 26 (2-4): 107-113 DEC 2007

1_3.        Lindgren M, Lepisto T
            Barkhausen noise evaluation of fatigue in high strength steel
            International Journal Of Materials & Product Technology 26 (1-2): 140-151 2006

1_4.        Moorthy V, Shaw BA, Hopkins P
            Surface and subsurface stress evaluation in case-carburised steel using high and low
            frequency magnetic Barkhausen emission measurements
            Journal Of Magnetism And Magnetic Materials 299 (2): 362-375 APR 2006

1_5.        Moorthy V, Shaw BA, Mountford P, et al.
            Magnetic Barkhausen emission technique for evaluation of residual stress alteration by
            grinding in case-carburised En36 steel
            ACTA MATERIALIA 53 (19): 4997-5006 NOV 2005

1_6.        Moorthy V, Shaw BA, Hopkins P
            Magnetic Barkhausen emission technique for detecting the overstressing during
            bending fatigue in case-carburised En36 steel
            NDT & E INTERNATIONAL 38 (2): 159-166 MAR 2005

1_7.        Blaow M, Evans JT, Shaw B
            Effect of deformation in bending on magnetic Barkhausen noise in low alloy steel
            Materials Science And Engineering A-Structural Materials Properties Microstructure And
            Processing 386 (1-2): 74-80 NOV 25 2004

1_8.        Lindgren M, Lepisto T
            On the stress vs. Barkhausen noise relation in a duplex stainless steel
            NDT & E INTERNATIONAL 37 (5): 403-410 JUL 2004

1_9.        Moorthy V, Shaw BA, Brimble K
            Testing of case depth in case carburized gear steels using magnetic barkhausen
            emission technique, MATERIALS EVALUATION 62 (5): 523-527 MAY 2004

1_10.       Moorthy V, Shaw BA, Day S
            Evaluation of applied and residual stresses in case-carburised En36 steel subjected to
            bending using the magnetic Barkhausen emission technique
            ACTA MATERIALIA 52 (7): 1927-1936 APR 2004

1_11.       Ng DHL, Cho KS, Wong ML, et al.
            Study of microstructure, mechanical properties, and magnetization process in low
            carbon steel bars by Barkhausen emission
            Materials Science And Engineering A-Structural Materials Properties Microstructure And
            Processing 358 (1-2): 186-198 OCT 15 2003

1_12.       Lindgren M, Lepisto T
            Effect of cyclic deformation on Barkhausen noise in a mild steel
            NDT & E INTERNATIONAL 36 (6): 401-409 SEP 2003



     Source: Web of Science & Google Scholar (As on 03-03-2009)                       Page 1 of 65
                                   Citations of Dr. Baldev Raj
                                Distinguished Scientist & Director, IGCAR

1_13.           Lindgren M, Lepisto T
                Relation between residual stress and Barkhausen noise in a duplex steel
                NDT & E INTERNATIONAL 36 (5): 279-288 JUL 2003

1_14.           Koo KM, Yau K, Ng DHL, et al.
                Characterization of pearlite grains in plain carbon steel by Barkhausen emission
                Materials Science And Engineering A-Structural Materials Properties Microstructure And
                Processing 351 (1-2): 310-315 JUN 25 2003

1_15.           Moorthy V, Shaw BA, Evans JT
                Evaluation of tempering induced changes in the hardness profile of case-carburised
                EN36 steel using magnetic Barkhausen noise analysis
                NDT & E INTERNATIONAL 36 (1): 43-49 JAN 2003

1_16.           Lindgren M, Lepisto T
                Application of Barkhausen noise to biaxial residual stress measurements in welded
                steel tubes
                MATERIALS SCIENCE AND TECHNOLOGY 18 (11): 1369-1376 NOV 2002

1_17.           Lindgren M, Lepisto T
                Effect of prestraining on Barkhausen noise vs. stress relation
                NDT & E INTERNATIONAL 34 (5): 337-344 JUL 2001

1_18.           Hyde TR, Evans JT, Shaw BA
                Effect of stress and heat treatment on magnetic barkhausen emission in case
                carburized steels, MATERIALS EVALUATION 58 (8): 985-990 AUG 2000

1_19.           Park DG, Kim CG, Hong JH
                Microstructural dependence of Barkhausen noise and magnetic relaxation in the weld
                HAZ of an RPV steel
                Journal Of Magnetism And Magnetic Materials 215: 765-768 Sp. Iss. Si Jun 2000

1_20.           Saquet O, Chicois J, Vincent A
                Barkhausen noise from plain carbon steels: Analysis of the influence of microstructure
                Materials Science And Engineering A - Structural Materials Properties Microstructure
                and Processing 269 (1-2): 73-82 Aug 30 1999


2.          KHANNA, AS; JHA, BB; RAJ, B
            Detection of Breakaway Oxidation and Spalling in the Oxide Scales of 21/4CR-1MO Steel
            using Acoustic-Emission Technique
            OXIDATION OF METALS, 23 (3-4): 159-176 1985

            Times Cited (without Self Citation): 22                                 Times Cited: 29

     2_1.       Raman RKS, Al-Mazrouee A
                High-temperature oxidation of Cr-Mo steels and its relevance to accelerated rupture
                testing and life assessment of In-service components
                Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science
                38A (8): 1750-1759 AUG 2007

     2_2.       Al-Mazrouee A, Raman RKS
                High temperature oxidation, of Cr-Mo steels in the context of accelerated rupture
                testing for creep life prediction
                Journal of Pressure Vessel Technology-Transactions of The ASME 129 (3): 454-459
                AUG 2007

     2_3.       1. Nishiyama Y, Kitamura K, Kudo T, et al.
                In situ evaluations for spallation of Cr2O3 scale by AE and Raman spectroscopy
                Journal of the Japan Institute of Metals 71 (1): 55-60 JAN 2007

     2_4.       Renusch D, Schutze M
                Experience with the use of the acoustic emission technique for monitoring scale failure
                in wet and dry environments
                MATERIALS AT HIGH TEMPERATURES 22 (1-2): 35-45 2005


      Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 2 of 65
                           Citations of Dr. Baldev Raj
                         Distinguished Scientist & Director, IGCAR

2_5.    Marino L, Bueno LO
        High-temperature oxidation behavior of 2 1/4Cr-1Mo steel in air - Part 1: Gain of mass
        kinetics and characterization of the oxide scale
        Journal Of Pressure Vessel Technology-Transactions of The ASME 123 (1): 88-96 FEB
        2001

2_6.    Bueno LO, Marino L
        High-temperature oxidation behavior of 2 1/4Cr-1Mo steel in air - Part 2: Scale growth,
        metal loss kinetics, and stress enhancement factors during creep testing
        Journal of Pressure Vessel Technology-Transactions of the ASME 123 (1): 97-104 FEB
        2001

2_7.    Peng X, Li T, Wu W, et al.
        Effect of La2O3 particles on microstructure and cracking-resistance of NiO scale on
        electrodeposited nickel films
        Materials Science And Engineering A-Structural Materials Properties Microstructure And
        Processing 298 (1-2): 100-109 JAN 31 2001

2_8.    Peng X, Li T, Wu W
        Effect of La2O3 particles on the oxidation of electrodeposited nickel films
        OXIDATION OF METALS 51 (3-4): 291-315 APR 1999

2_9.    Schulte M, Rahmel A, Schutze M
        The sulfidation behavior of several commercial ferritic and austenitic steels
        OXIDATION OF METALS 49 (1-2): 33-70 FEB 1998

2_10.   Bennett MJ, Evans HE, Shores DA
        Measurement Methods for Determination Of Spallation Of Oxide Scales
        Materials at High Temperatures 12 (2-3): 127-133 1994

2_11.   Zhang YF, Shores DA
        Cracking and Spalling Of Oxide Scale From 304 Stainless-Steel At High-Temperatures
        Journal Of The Electrochemical Society 141 (5): 1255-1260 MAY 1994

2_12.   Nagl MM, Evans WT
        The Mechanical Failure Of Oxide Scales Under Tensile Or Compressive Load
        Journal Of Materials Science 28 (23): 6247-6260 DEC 1 1993

2_13.   Walter M, Schutze M, Rahmel A
        Behavior Of Oxide Scales On 12cr-1mo Steel During Thermal Cycling
        Oxidation Of Metals 39 (5-6): 389-410 JUN 1993

2_14.   Schmutzler HJ, Grabke HJ
        Application Of An Acoustic-Emission Technique To The High-Temperature Oxidation Of
        Fe-Cr-Al Alloys
        Oxidation Of Metals 39 (1-2): 15-29 Feb 1993

2_15.   Nagl MT, Evans WT, Saunders SRJ, et al.
        Investigation Of Failure Of Brittle Layers Under Compressive Stresses Using Acoustic-
        Emission
        Materials Science and Technology 8 (11): 1043-1049 NOV 1992

2_16.   Raman RkS, Khanna AS, Tiwari RK
        Influence Of Grain-Size On The Oxidation Resistance Of 2-1/4cr-1mo Steel
        Oxidation Of Metals 37 (1-2): 1-12 Feb 1992

2_17.   Hall DJ, Booth S, Evans WT
        Use Of Acoustic-Emission To Identify Oxide Fracture Modes
        Materials Science And Technology 6 (1): 53-55 Jan 1990

2_18.   Tiefan L, Meishuan L, Henrong G
        Critical Cracking Stress Of Oxide Scales Of Tantalum Due To Oxidation
        Materials Science And Engineering A-Structural Materials Properties Microstructure And
        Processing 120: 235-238 Part 1 Nov 15 1989



 Source: Web of Science & Google Scholar (As on 03-03-2009)                       Page 3 of 65
                             Citations of Dr. Baldev Raj
                           Distinguished Scientist & Director, IGCAR

2_19.    Khanna AS, Jonas H, Quadakkers WJ
         Use Of Acoustic-Emission Technique To Study The Spalling Behavior Of Oxide Scales On
         Ni-10cr-8al Containing Sulfur And Or Yttrium Impurity
         Werkstoffe Und Korrosion-Materials And Corrosion 40 (9): 552-558 Sep 1989

2_20.    Christl W, Rahmel A, Schutze M
         Behavior Of Oxide Scales On 2.25cr-1mo Steel During Thermal Cycling .1. Scales
         Formed In Oxygen And Air, Oxidation Of Metals 31 (1-2): 1-34 Feb 1989

2_21.    Simms NJ, Little JA
         Scale Growth On 2.25cr-1mo Steel
         Materials Science And Technology 4 (12): 1133-1139 Dec 1988

2_22.    Christl W, Rahmel A, Schutze M
         Application Of The Acoustic-Emission Technique For The Detection Of Oxide Scale
         Cracking During Thermal Cycling
         Materials Science And Engineering 87 (1-2): 289-293 Mar 1987

3.      Mudali UK, Shankar P, Ningshen S, Dayal R K, Khatak H S and Baldev Raj
        On the pitting corrosion resistance of nitrogen alloyed cold worked austenitic stainless
        steels,
        CORROSION SCIENCE 44 (10): 2183-2198 OCT 2002

        Times Cited (without Self Citation): 24                              Times Cited: 25

3_1.    Y Fu, X Wu, E Han, W Ke, K Yang, Z Jiang.
        Influence of cold work on pitting corrosion behavior of a high nitrogen stainless steel
        JNL. OF THE ELECTROCHEMICAL SOCIETY Volume: 155 Issue: 8 , C455-C463 2008
3_2.    Trethewey KR, Wenman M, Chard-Tuckey P & Roebuck, B
        Correlation of meso- and micro-scale hardness measurements with the pitting of
        plastically-deformed Type 304L stainless steel
        CORROSION SCIENCE        Volume: 50    Issue: 4   Pages: 1132-1141     APR 2008

3_3.    Peguet, L., Malki, B., Baroux, B.
        Influence of cold working on the resistance of stainless steels to pitting corrosion
        ECS Transactions 3 (31), pp. 89-97 2007

3_4.    de Abreu, H.F.G., de Carvalho, S.S., de Lima Neto, P., dos Santos, R.P., Freire, V.N.,
        Silva, P.M. de O., Tavares, S.S.M.
        Deformation induced martensite in an AISI 301LN stainless steel: Characterization and
        influence on pitting corrosion resistance , Materials Research 10 (4), pp. 359-366 2007

3_5.    Mudali UK, Sridhar TM, Rajendran N
        Electrophoretic deposition of TiO2 and TiO2+CeO2 coatings on type 304L stainless steel
        SURFACE ENGINEERING        Volume: 23     Issue: 4   Pages: 267-272 JUL 2007

3_6.    Kumar BR, Mahato B, Singh R
        Influence of cold-worked structure on electrochemical properties of austenitic stainless
        steels
        Metallurgical And Materials Transactions A - Physical Metallurgy And Materials Science
        38A (9): 2085-2094 SEP 2007

3_7.    Eckhard K, Etienne M, Schulte A, et al.
        Constant-distance mode AC-SECM for the visualisation of corrosion pits
        ELECTROCHEMISTRY COMMUNICATIONS 9 (7): 1793-1797 JUL 2007

3_8.    Singh R, Dahotre NB
        Corrosion degradation and prevention by surface modification of biometallic materials
        Journal Of Materials Science-Materials In Medicine 18 (5): 725-751 MAY 2007

3_9.    Hamdy AS, El-Shenawy E, El-Bitar T


  Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 4 of 65
                             Citations of Dr. Baldev Raj
                           Distinguished Scientist & Director, IGCAR

        The corrosion behavior of niobium bearing cold deformed austenitic stainless steels in
        3.5% NaCl solution
        MATERIALS LETTERS 61 (13): 2827-2832 MAY 2007

3_10.   Garcia C, Martin F, de Tiedra P, et al.
        Pitting corrosion behaviour of PM austenitic stainless steels sintered in nitrogen-hydrogen
        atmosphere
        CORROSION SCIENCE 49 (4): 1718-1736 APR 2007

3_11.   Peguet L, Malki B, Baroux B
        Influence of cold working on the pitting corrosion resistance of stainless steels
        CORROSION SCIENCE 49 (4): 1933-1948 APR 2007

3_12.   Martinez L, Malki B, Berthome G, et al.
        Ar-implantation on AISI 304 stainless steel against pit initiation processes
        SURFACE & COATINGS TECHNOLOGY 201 (3-4): 1671-1678 OCT 5 2006

3_13.   Hamada AS, Karjalainen LP, Somani MC
        Electrochemical corrosion behaviour of a novel submicron-grained austenitic stainless
        steel in an acidic NaCl solution
        Materials Science And Engineering A-Structural Materials Properties Microstructure And
        Processing 431 (1-2): 211-217 SEP 15 2006

3_14.   Vignal V, Mary N, Oltra R, et al.
        A mechanical-electrochemical approach for the determination of precursor sites for pitting
        corrosion at the microscale
        JOURNAL OF THE ELECTROCHEMICAL SOCIETY 153 (9): B352-B357 2006

3_15.   Amirthalingam R, Shaikh H, Anita T, Poonguzhali, R, Khatak, H S
        Effect of high temperature ageing on the corrosion behaviour of nitrogen-added AISI type
        316L stainless steel
        Transactions Of The Indian Institute Of Metals 59 (2): 271-282 APR 2006

3_16.   Correia MJ, Salta MM
        Stress corrosion cracking of austenitic stainless steel alloys for reinforced concrete
        MATERIALS SCIENCE FORUM 514-516: 1511-1515 Part 1-2 2006

3_17.   Lopez HF, Cisneros MM, Mancha H, et al.
        Grain size effects on the SCC susceptibility of a nitrogen steel in hot NaCl solutions
        CORROSION SCIENCE 48 (4): 913-924 APR 2006

3_18.   Tzaneva BR, Fachikov LB, Raicheff RG
        Pitting corrosion of Cr-Mn-N steel in sulphuric acid media
        JOURNAL OF APPLIED ELECTROCHEMISTRY 36 (3): 347-353 MAR 2006

3_19.   Orellana LM, Perez FJ, Gomez C
        The effect of nitrogen ion implantation on the corrosion behaviour of stainless steels in
        chloride media
        SURFACE & COATINGS TECHNOLOGY 200 (5-6): 1609-1615 NOV 21 2005

3_20.   Narushima T, Suzuki K, Murakami T, et al.
        Fatigue properties of stainless steel wire ropes for electrodes in functional electrical
        stimulation systems
        MATERIALS TRANSACTIONS 46 (9): 2083-2088 SEP 2005

3_21.   Kumar BR, Singh R, Mahato B, et al.
        Effect of texture on corrosion behavior of AISI 304L stainless steel
        MATERIALS CHARACTERIZATION 54 (2): 141-147 FEB 2005

3_22.   Sumita M, Hanawa T, Teoh SH
        Development of nitrogen-containing nickel-free austenitic stainless steels for metallic
        biomaterials - Review
        Materials Science & Engineering C-Biomimetic And Supramolecular Systems 24 (6-8):
        753-760 DEC 1 2004

3_23.   Li CX, Bell T


  Source: Web of Science & Google Scholar (As on 03-03-2009)                           Page 5 of 65
                               Citations of Dr. Baldev Raj
                             Distinguished Scientist & Director, IGCAR

          Corrosion properties of active screen plasma nitrided 316 austenitic stainless steel
          CORROSION SCIENCE 46 (6): 1527-1547 JUN 2004

3_24.     Sridhar TM, Danadurai KSK, Mudali UK, Rajeswari, R.
          Pitting and crevice corrosion studies of nitrogen bearing stainless steels in bleach media
          Transactions Of The Indian Institute Of Metals 55 (5): 431-438 OCT 2002

4.          V. Moorthy, S. Vaidyanathan, T. Jayakumar and Baldev Raj
            Microstructural characterization of quenched and tempered 0.2% carbon steel using
            magnetic Barkhausen noise analysis
            JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS 171 (1-2): 179-189 JUL 1997

            Times Cited (without Self Citation): 16                           Times Cited: 25
4_1.        Moorthy V, Shaw BA
            Magnetic Barkhausen emission measurements for evaluation of material properties in
            gears
            NONDESTRUCTIVE TESTING AND EVALUATION, 23(4):317-347, 2008

4_2.        Davut K, Gur CH
            Monitoring the microstructural changes during tempering of quenched SAE 5140 steel
            by magnetic barkhausen noise
            JOURNAL OF NONDESTRUCTIVE EVALUATION, 26 (2-4): 107-113 DEC 2007

4_3.        Palma ES, Mansur TR, Silva SF, et al.
            Fatigue damage assessment in AISI 8620 steel using Barkhausen noise
            INTERNATIONAL JOURNAL OF FATIGUE 27 (6): 659-665 JUN 2005

4_4.        Perez-Benitez JA, Capo-Sanchez J, Anglada-Rivera J, et al.
            A model for the influence of microstructural defects on magnetic Barkhausen noise in
            plain steels
            JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS 288: 433-442 MAR 2005

4_5.        Moorthy V, Shaw BA, Hopkins P
            Magnetic Barkhausen emission technique for detecting the overstressing during
            bending fatigue in case-carburised En36 steel
            NDT & E INTERNATIONAL 38 (2): 159-166 MAR 2005

4_6.        Kwun SI
            Effect of thermal exposure of 2.25Cr-1Mo steel on magnetic Barkhausen noise
            JOURNAL OF THE KOREAN PHYSICAL SOCIETY 45 (3): 733-737 SEP 2004

4_7.        Byeon JW, Kim CS, Kwun SI
            Evaluation of thermal degradation of 2.25Cr-1Mo steel by magnetic Barkhausen noise
            PHYSICA STATUS SOLIDI B-BASIC RESEARCH 241 (7): 1756-1760 JUN 2004

4_8.        Moorthy V, Shaw BA, Brimble K
            Testing of case depth in case carburized gear steels using magnetic barkhausen
            emission technique
            MATERIALS EVALUATION 62 (5): 523-527 MAY 2004

4_9.        Moorthy V, Shaw BA, Day S
            Evaluation of applied and residual stresses in case-carburised En36 steel subjected to
            bending using the magnetic Barkhausen emission technique
            ACTA MATERIALIA 52 (7): 1927-1936 APR 2004

4_10.       Gilbert I, Bull S, Evans T, et al.
            Effects of processing upon the properties of soft magnetic composites for low loss
            applications
            JOURNAL OF MATERIALS SCIENCE 39 (2): 457-461 JAN 15 2004

4_11.       Byeon JW, Kwun SI
            Magnetic evaluation of microstructures and strength of eutectoid steel
            MATERIALS TRANSACTIONS 44 (10): 2184-2190 OCT 2003


     Source: Web of Science & Google Scholar (As on 03-03-2009)                      Page 6 of 65
                               Citations of Dr. Baldev Raj
                             Distinguished Scientist & Director, IGCAR

4_12.       Singh M
            Developments in instrumentation and automation for NDE applications: in-house
            experience in the Department of Atomic Energy
            INSIGHT 45 (1): 73-86 JAN 2003

4_13.       Moorthy V, Shaw BA, Evans JT
            Evaluation of tempering induced changes in the hardness profile of case-carburised
            EN36 steel using magnetic Barkhausen noise analysis
            NDT & E INTERNATIONAL 36 (1): 43-49 JAN 2003

4_14.       Gilbert IP, Moorthy V, Bull SJ, et al.
            Development of soft magnetic composites for low-loss applications
            Journal Of Magnetism And Magnetic Materials 242: 232-234 Part 1 APR 2002

4_15.       Yamaura S, Furuya Y, Watanabe T
            The effect of grain boundary microstructure on Barkhausen noise in ferromagnetic
            materials
            ACTA MATERIALIA 49 (15): 3019-3027 SEP 3 2001

4_16.       Anglada-Rivera J, Padovese LR, Capo-Sanchez J
            Magnetic Barkhausen Noise and hysteresis loop in commercial carbon steel: influence
            of applied tensile stress and grain size
            Journal Of Magnetism And Magnetic Materials 231 (2-3): 299-306 JUN 2001

5.          P. Palanichamy, A. Joseph, T. Jayakumar and Baldev Raj
            Ultrasonic Velocity-Measurements for Estimation of Grain-Size in Austenitic Stainless-
            Steel
            NDT & E INTERNATIONAL 28 (3): 179-185 JUN 1995

            Times Cited (without Self Citation): 12                              Times Cited:       24

              Study of recrystallisation in interstitial free (IF) steel by ultrasonic measurements
     5_1.
              Pandey JC
              IRONMAKING & STEELMAKING Volume: 35 Issue: 4 Pages: 297-302, MAY 2008
     5_2.     Poorhaydari K, Ivey DG
              Application of carbon extraction replicas in grain-size measurements of high-strength
              steels using TEM
              MATERIALS CHARACTERIZATION 58 (6): 544-554 JUN 2007

     5_3.     Smith A, Kruger SE, Sietsma J, et al.
              Laser-ultrasonic monitoring of austenite recrystallization in C-Mn steel
              ISIJ INTERNATIONAL 46 (8): 1223-1232 2006

     5_4.     Unal R, Sarpun IH, Yalim HA, et al.
              The mean grain size determination of boron carbide (B4C)-aluminium (Al) and boron
              carbide (B4C)-nickel (Ni) composites by ultrasonic velocity technique, MATERIALS
              CHARACTERIZATION 56 (3): 241-244 APR 2006

     5_5.     Gur CH, Tuncer BO
              Characterization of microstructural phases of steels by sound velocity measurement
              MATERIALS CHARACTERIZATION 55 (2): 160-166 AUG 2005

     5_6.     Sarpun IH, Kilickaya MS, Tuncel S
              Mean grain size determination in marbles by ultrasonic velocity techniques
              NDT & E INTERNATIONAL 38 (1): 21-25 JAN 2005

     5_7.     Lin L, Li XM, Tan JL
              Comparison among ultrasonic velocity, attenuation and power spectra of different
              heat treatment transformation products in 38CrMoAl steel
              KEY ENGINEERING MATERIALS 270-273: 346-352 Part 1-3 2004

     5_8.     Sgalla M, Vangi D
              A device for measuring the velocity of ultrasonic waves: An application to stress
              analysis


     Source: Web of Science & Google Scholar (As on 03-03-2009)                          Page 7 of 65
                                   Citations of Dr. Baldev Raj
                                Distinguished Scientist & Director, IGCAR

                 EXPERIMENTAL MECHANICS 44 (1): 85-90 FEB 2004

     5_9.        Palanichamy P, Vasudevan M
                 Ultrasonic testing of annealing behavior and texture and determination of texture
                 coefficients in stainless steel
                 MATERIALS EVALUATION 61 (9): 1020-1025 SEP 2003

     5_10.       Gur CH, Keles Y
                 Ultrasonic characterisation of hot-rolled and heat-treated plain carbon steels
                 INSIGHT 45 (9): 615-620 SEP 2003

     5_11.       Vasudevan M, Palanichamy P
                 Assessment of microstructure stability of cold worked Ti-modified austenitic stainless
                 steel during aging using ultrasonic velocity measurements and correlation with
                 mechanical properties
                 JOURNAL OF NUCLEAR MATERIALS 312 (2-3): 181-190 FEB 2003

     5_12.       Vasudevan M, Palanichamy P
                 Characterization of microstructural changes during annealing of cold worked
                 austenitic stainless steel using ultrasonic velocity measurements and correlation with
                 mechanical properties
                 Journal Of Materials Engineering And Performance 11 (2): 169-179 APR 2002



6.           L. Thair, U. Kamachi Mudali, N. Bhuvaneswaran, K.G.M. Nair, R. Asokamani and Baldev
             Raj
             Nitrogen ion implantation and in vitro corrosion behavior of as-cast Ti-6Al-7Nb alloy
             CORROSION SCIENCE, 44 (11): 2439-2457 NOV 2002

             Times Cited (without Self Citation): 15                          Times Cited:   21

6_1.              Role of aluminum ion implantation on microstructure, microhardness and corrosion
                  properties of titanium alloy
                  Liu YZ, Zu XT, Wang L, et al.
                  VACUUM     83(2), 444-447, SEP 26 2008

6_2.              In vitro corrosion behavior of TiN layer produced on orthopedic nickel-titanium shape
                  memory alloy by nitrogen plasma immersion ion implantation using different
                  frequencies
                  Liu XM, Wu SL, Chu PK, et al.
                  SURFACE & COATINGS TECHNOLOGY, 202(11), 2463-2466             FEB 25 2008

6_3.              Improvement in corrosion resistance of biomaterial alumina after 60 keV nitrogen ion
                  implantation
                  Shikha D, Jha U, Sinha SK, et al.
                  INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY               Volume: 5     Issue:
                  1 Pages: 44-48 Published: 2008

6_4.              Microstructural investigation of alumina implanted with 30 keV nitrogen ions
                  Shikha D, Jha U, Sinha SK, et al.
                  NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM
                  INTERACTIONS WITH MATERIALS AND ATOMS Volume: 264 Issue: 2

6_5.              Liu YZ, Zu XT, Tang R, et al.
                  Role of tantalum and nickel ion implantation on corrosion resistance properties of a
                  Ti-Al-Zr alloy
                  SURFACE & COATINGS TECHNOLOGY 201 (16-17): 7538-7543 MAY 21 2007

6_6.              Liu YZ, Zu XT, Li C, et al.
                  Surface characteristics and corrosion behavior of Ti-Al-Zr alloy implanted with Al and
                  Nb
                  CORROSION SCIENCE 49 (3): 1069-1080 MAR 2007

6_7.              Liu YZ, Zu XT, Qiu SY, et al.

      Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 8 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

               Improvement of tribological behavior of a Ti-Al-V alloy by nitrogen ion implantation
               RARE METALS 25: 309-314 Sp. Iss. SI OCT 2006

6_8.           Liu YZ, Zu XT, Qiu SY, et al.
               Phase formation and modification of corrosion property of nitrogen implanted Ti-Al-V
               alloy
               VACUUM 81 (1): 71-76 SEP 16 2006

6_9.           Masmoudi M, Capek D, Abdelhedi R, et al.
               Application of surface response analysis to the optimisation of nitric passivation of cp
               titanium and Ti6Al4V
               SURFACE & COATINGS TECHNOLOGY 200 (24): 6651-6658 AUG 1 2006

6_10.          Liu YZ, Zu XT, He X, et al.
               Improvement of tribological behavior of a Ti-Al-Zr alloy by nitrogen ion implantation
               NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM
               INTERACTIONS WITH MATERIALS AND ATOMS 248 (1): 42-46 JUL 2006

6_11.          Mudali UK, Kuhn U, Eckert J, et al.
               Corrosion behaviour of zirconium based bulk metallic glasses
               TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS 59 (1): 123-138 FEB 2006

6_12           Vadiraj A, Kamaraj M, Mudali UK, et al.
               Fretting fatigue of biomaterials
               TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS 58 (5): 911-929 OCT 2005

6_13.          Liu YZ, Zu XT, Cao J, et al.
               Phase formation in nitrogen ion implanted Ti-Al-Zr alloy and modification of corrosion
               property
               NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM
               INTERACTIONS WITH MATERIALS AND ATOMS 237 (3-4): 543-549 AUG 2005

6_14.          Wei RH, Booker T, Rincon C, et al.
               High-intensity plasma ion nitriding of orthopedic materials - Part I. Tribological study
               SURFACE & COATINGS TECHNOLOGY 186 (1-2): 305-313 AUG 2 2004

6_15.          Lakshmi SG, Tamilselvi S, Rajendran N and Arivuoli D
               Effect of N+ ion implantation on the corrosion behaviour of Ti-6Al-7Nb and Ti-5Al-
               2Nb-1Ta orthopaedic alloys in Hanks solution
               JOURNAL OF APPLIED ELECTROCHEMISTRY 34 (3): 271-276 MAR 2004

 7.     V. Moorthy, B.K.Choudhary, S. Vaidyanathan, T. Jayakumar, K.B.S. Rao & Baldev Raj
        An assessment of low cycle fatigue damage using magnetic Barkhausen emission in 9Cr-
        1Mo ferritic steel
        INTERNATIONAL JOURNAL OF FATIGUE 21 (3): 263-269 MAR 1999

        Times Cited (without Self Citation): 13                                   Times Cited:    20

 7_1.        Soultan M, Kleber X, Chicois J, et al.
             Mechanical Barkhausen noise during fatigue of iron
             NDT & E INTERNATIONAL 39 (6): 493-498 SEP 2006

 7_2.        Lindgren M, Lepisto T
             Barkhausen noise evaluation of fatigue in high strength steel
             International Journal Of Materials & Product Technology 26 (1-2): 140-151 2006

 7_3.        Moorthy V, Shaw BA, Hopkins P
             Surface and subsurface stress evaluation in case-carburised steel using high and low
             frequency magnetic Barkhausen emission measurements
             Journal Of Magnetism And Magnetic Materials 299 (2): 362-375 APR 2006

 7_4.        Dong LH, Xu BS, Dong SY, et al.
             Metal magnetic memory testing for early damage assessment in ferromagnetic
             materials
             Journal Of Central South University Of Technology 12: 102-106 Sup. 2 Oct 2005

 7_5.        Sagar SP, Parida N, Das S, et al.

      Source: Web of Science & Google Scholar (As on 03-03-2009)                       Page 9 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

             Magnetic Barkhausen emission to evaluate fatigue damage in a low carbon structural
             steel
             INTERNATIONAL JOURNAL OF FATIGUE 27 (3): 317-322 MAR 2005

 7_6.        Moorthy V, Shaw BA, Hopkins P
             Magnetic Barkhausen emission technique for detecting the overstressing during
             bending fatigue in case-carburised En36 steel
             NDT & E INTERNATIONAL 38 (2): 159-166 MAR 2005

 7_7.        Lo CCH
             A review of the barkhausen effect and its applications to nondestructive testing
             MATERIALS EVALUATION 62 (7): 741-748 JUL 2004

 7_8.        Moorthy V, Shaw BA, Day S
             Evaluation of applied and residual stresses in case-carburised En36 steel subjected to
             bending using the magnetic Barkhausen emission technique
             ACTA MATERIALIA 52 (7): 1927-1936 APR 2004

 7_9.        Lindgren M, Lepisto T
             Effect of cyclic deformation on Barkhausen noise in a mild steel
             NDT & E INTERNATIONAL 36 (6): 401-409 SEP 2003

 7_10.       Bhattacharya DK
             NDT for residual life assessment in Indian industry,
             INSIGHT 45 (1): 31-40 JAN 2003

 7_11.       Singh M
             Developments in instrumentation and automation for NDE applications: in-house
             experience in the Department of Atomic Energy
             INSIGHT 45 (1): 73-86 JAN 2003

 7_12.       Moorthy V, Shaw BA, Evans JT
             Evaluation of tempering induced changes in the hardness profile of case-carburised
             EN36 steel using magnetic Barkhausen noise analysis
             NDT & E INTERNATIONAL 36 (1): 43-49 JAN 2003

 7_13.       Melikhov Y, Lo CCH, Perevertov O, et al.
             Magnetic response to cyclic fatigue of low carbon Fe-based samples
             Journal of Physics D-Applied Physics 35 (5): 413-422 MAR 7 2002
 8.       M. Geetha, U. Kamachi Mudali, A.K. Gogia, R. Asokamani and Baldev Raj
          Influence of microstructure and alloying elements on corrosion behavior of Ti-13Nb-13Zr
          alloy
          CORROSION SCIENCE 46 (4): 877-892 APR 2004

          Times Cited (without self citation): 13 +                              Times Cited : 20

8_1.           Electrochemical stability and corrosion resistance of Ti-Mo alloys for biomedical
              applications
              Oliveira NTC, Guastaldi AC
              ACTA BIOMATERIALIA Volume: 5 Issue: 1 Pages: 399-405 Published: JAN 2009
8_2.          Mechanical and corrosion behaviour of a Ti-Al-Nb alloy after deformation at elevated
              temperatures
              Popa MV, Raducanu D, Vasilescu E, et al.
              MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION Volume: 59 Issue:
              12 Pages: 919-928 Published: DEC 2008
8_3.          Corrosion behavior of Ti-xNb-13Zr alloys in Ringer's solution
              Author(s): Robin A, Carvalho OAS, Schneider SG, et al.
              MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION                  Volume: 59      Issue:
              12 Pages: 929-933 Published: DEC 2008
8_4.          Effect of the content on the electrochemical stability of titanium alloys with vanadium
              or zirconium
              Popa MV, Vasilescu E, Drob P, et al.


      Source: Web of Science & Google Scholar (As on 03-03-2009)                      Page 10 of 65
                               Citations of Dr. Baldev Raj
                             Distinguished Scientist & Director, IGCAR

             REVISTA DE CHIMIE      Volume: 59      Issue: 6   Pages: 618-622    Published: JUN 2008
8_5.         Elastic modulus of biomedical titanium alloys by nano-indentation and ultrasonic
             techniques - A comparative study
             Majumdar P, Singh SB, Chakraborty M
             MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES
             MICROSTRUCTURE AND PROCESSING Volume: 489 Issue: 1-2 Pages: 419-425
             Published: AUG 20 2008
8_6.         Effect of heat treatment on corrosion behavior of Ti-6Al-4V alloy weldments
             Karimzadeh F, Heidarbeigy M, Saatchi A
             JOURNAL OF MATERIALS PROCESSING TECHNOLOGY Volume: 206 Issue: 1-3
             Pages: 388-394 Published: SEP 12 2008
8_7.         Padilla N, Bronson A
             Electrochemical characterization of albumin protein on Ti-6Al-4V alloy immersed in a
             simulated plasma solution
             JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A 81A (3): 531-543 JUN 1
             2007
8_8.         Rezende MCRA, Alves APR, Codaro EN, et al.
             Effect of commercial mouthwashes on the corrosion resistance of Ti-10Mo
             experimental alloy
             JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE 18 (1): 149-154 JAN
             2007
8_9.         Lim PY, She PL, Shih HC
             Microstructure effect on microtopography of chemically etched alpha plus beta Ti
             alloys
             APPLIED SURFACE SCIENCE 253 (2): 449-458 NOV 15 2006
8_10.        Niemeyer TC, Grandini CR, Schneider SG
             Low-frequency high-temperature internal friction in Ti-13Nb-13Zr alloy
             KEY ENGINEERING MATERIALS 319: 103-108 2006
8_11.        Elias LM, Schneider SG, Schneider S, et al.
             Microstructural and mechanical characterization of biomedical Ti-Nb-Zr(-Ta) alloys
             Materials Science and Engineering A-Structural Materials Properties Microstructure and
             Processing 432 (1-2): 108-112 SEP 25 2006
8_12.        Belkhaouda M, Bazzi L, Benlhachemi A, et al.
             Effect of the heat treatment on the corrosion behaviour of amorphous Fe-Cr-P-C-Si
             alloy in 0.5 M H2SO4
             APPLIED SURFACE SCIENCE 252 (22): 7921-7925 SEP 15 2006
8_13.        Pimenova NV, Starr TL
             Electrochemical and corrosion behavior of Ti-xAl-yFe alloys prepared by direct metal
             deposition method
             ELECTROCHIMICA ACTA 51 (10): 2042-2049 FEB 1 2006

9.        Mudali UK, Sridhar TM, Baldev Raj
          Corrosion of bio implants
          Sadhana-Academy Proceedings In Engineering Sciences 28: 601-637 Part 3-4 JUN-AUG
          2003

          Times Cited (without Self Citation): 17                               Times Cited:   19

9_1.         Modelling and analysis of pitting corrosion resistance of stainless steel overlays
             deposited by flux cored arc welding process
             Palani PK, Murugan N
             SURFACE ENGINEERING        Vol.24 (6) (422-428), NOV 2008

9_2.         Effects of tungsten pre-implanted layer on corrosion and electrochemical
             characteristics of amorphous carbon films on stainless steel
             Liu CL, Xu M, Zhang W, et al.
             DIAMOND AND RELATED MATERIALS Volume: 17 Issue: 7-10                  Special Issue: Sp.
             Iss. SI Pages: 1738-1742 Published: JUL-OCT 2008


     Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 11 of 65
                              Citations of Dr. Baldev Raj
                           Distinguished Scientist & Director, IGCAR

9_3.       Corrosion resistance of pulsed laser-treated Ti-6Al-4V implant in simulated biofluids
           Zaveri N, Mahapatra M, Deceuster A, et al.
           ELECTROCHIMICA ACTA        Vol.53(15): 5022-5032, JUN 1 2008

9_4.       Study of 316L stainless steel corrosion in cvasibiological conditions
           Tutunaru B, Samide AP, Preda M
           REVISTA DE CHIMIE      Volume: 58      Issue: 10   Pages: 923-926   Published: OCT 2007

9_5.       Laser surface processing of Ti6Al4V in gaseous nitrogen: corrosion performance in
           physiological solution
           Singh R, Chowdhury SG, Tiwari SK, et al.
           JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE                Volume: 19   Issue: 3
           Pages: 1363-1369 Published: MAR 2008

9_6.       Title: Production and characterization of ZrO2 ceramics and composites to be used for
           hip prosthesis
           Arin M, Goller G, Vleugels J, et al.
           JOURNAL OF MATERIALS SCIENCE           Volume: 43    Issue: 5   Pages: 1599-1611
           Published: MAR 2008

9_7.       Narayanan R, Seshadri SK
           Synthesis and corrosion of functionally gradient TiO2 and hydroxyapatite coatings on
           Ti-6Al-4V
           MATERIALS CHEMISTRY AND PHYSICS 106 (2-3): 406-411 DEC 15 2007

9_8.       Triantafyllidis GK, Kazantzis AV, Karageorgiou KT
           Premature fracture of a stainless steel 316L orthopaedic plate implant by alternative
           episodes of fatigue and cleavage decoherence
           ENGINEERING FAILURE ANALYSIS 14 (7): 1346-1350 OCT 2007

9_9.       Bougherara H, Bureau M, Campbell M, et al.
           Design of a biomimetic polymer-composite hip prosthesis
           JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A 82A (1): 27-40 JUL 2007

9_10.      Dadfar M, Fathi MH, Karimzadeh F, et al.
           Effect of TIG welding on corrosion behavior of 316L stainless steel
           MATERIALS LETTERS 61 (11-12): 2343-2346 MAY 2007

9_11.      Singh R, Dahotre NB
           Corrosion degradation and prevention by surface modification of biometallic materials
           Journal Of Materials Science-Materials In Medicine 18 (5): 725-751 MAY 2007

9_12.      Aionicesei E, Ionita D, Miculescu F, et al.
           Connection between biocompatibility and electrochemical stability of a Co-Cr-Mo alloy
           REVISTA DE CHIMIE 57 (8): 813-818 AUG 2006

9_13.      Tutunaru B, Samide A, Preda M
           The influence of the biological active molecules on the in vitro corrosion of the 316L
           stainless steel
           REVISTA DE CHIMIE 56 (9): 934-936 SEP 2005

9_14.      Gordin DM, Gloriant T, Nemtoi G, et al.
           Synthesis, structure and electrochemical behavior of a beta Ti-12Mo-5Ta alloy as new
           biomaterial
           MATERIALS LETTERS 59 (23): 2936-2941 OCT 2005

9_15.      Gordin DM, Gloriant T, Nemtoi G, et al.
           Synthesis, structure and electrochemical behavior of a beta Ti-12Mo-5Ta alloy as new
           biomaterial
           MATERIALS LETTERS 59 (23): 2959-2964 OCT 2005

9_16.      Patterson SP, Daffner RH, Gallo RA


   Source: Web of Science & Google Scholar (As on 03-03-2009)                       Page 12 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

              Electrochemical corrosion of metal implants
              AMERICAN JOURNAL OF ROENTGENOLOGY 184 (4): 1219-1222 APR 2005

9_17.         Tutunaru B, Samide A, Preda M
              The study of the electrochemical behaviour of 316L stainless steel bioimplants in
              physiological serum
              REVISTA DE CHIMIE 55 (10): 757-758 OCT 2004

10.     Tata BVR, Baldev Raj
        Confocal laser scanning microscopy:Applications in material science & technology
        BULLETIN OF MATERIALS SCIENCE 21 (4): 263-278 AUG 1998

        Times Cited (without Self Citation): 15                                   Times Cited:    19

 10_1.       Biofouling control of titanium by microroughness reduction
             Gopal J, Tata BVR, George RP, Dayal R K;
             SURFACE ENGINEERING Vol. 24(6) : 447-451, NOV 2008
 10_2.       A Confocal microscopic study on colony morphology and sporulation of Bacillus sp.
             Mary, MS;Gopal, J;Tata, BVR;Rao, TS;Vincent, S;
             WORLD JOURNAL OF MICROBIOLOGY & BIOTECHNOLOGY Vol.24 (11), 2435-2442,
             NOV 2008
 10_3.       Tata BVR, Jena SS
             Ordering, dynamics and phase transitions in charged colloids
             SOLID STATE COMMUNICATIONS 139 (11-12): 562-580 2006

 10_4.       Mohanty PS, Tata BVR, Toyotama A, et al.
             Gas-solid coexistence in highly charged colloidal suspensions
             LANGMUIR 21 (25): 11678-11683 DEC 6 2005
 10_5.       Challis RE, Povey MJW, Mather ML, et al.
             Ultrasound techniques for characterizing colloidal dispersions
             REPORTS ON PROGRESS IN PHYSICS 68 (7): 1541-1637 JUL 2005
 10_6.       Barnes MD, Mehta A, Kumar P, et al.
             Confinement effects on the structure and dynamics of polymer systems from the
             mesoscale to the nanoscale
             Journal Of Polymer Science Part B-Polymer Physics 43 (13): 1571-1590 JUL 1 2005
 10_7.       Lavrentovich OD
             Fluorescence confocal polarizing microscopy: Three-dimensional imaging of the
             director
             PRAMANA-JOURNAL OF PHYSICS 61 (2): 373-384 AUG 2003
 10_8.       Mohanty PS, Tata BVR
             Charge and salt-driven reentrant order-disorder and gas-solid transitions in charged
             colloids
             JOURNAL OF COLLOID AND INTERFACE SCIENCE 264 (1): 101-108 AUG 1 2003
 10_9.       Tesfamichael T, Will G, Bostrom T, et al.
             Investigations of dye-sensitised titania solar cell electrode using confocal laser
             scanning microscopy
             JOURNAL OF MATERIALS SCIENCE 38 (8): 1721-1726 APR 15 2003


10_10.       Valiullin R, Furo I
             Low-temperature phase separation of a binary liquid mixture in porous materials
             studied by cryoporometry and pulsed-field-gradient NMR
             PHYSICAL REVIEW E 66 (3): Art. No. 031508 Part 1 SEP 2002
10_11.       Dierking I
             Fluorescence confocal polarizing microscopy: Imaging liquid crystal director fields in
             three dimensions
             CHEMPHYSCHEM 2 (11): 663+ NOV 19 2001
10_12.       Tata BVR
             Colloidal dispersions and phase transitions in charged colloids
             CURRENT SCIENCE 80 (8): 948-958 APR 25 2001


      Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 13 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

10_13.       Wang KG
             Simulating formation of voids in charged colloids by Brownian dynamics
             PHYSICAL REVIEW E 62 (5): 6937-6941 Part B NOV 2000
10_14.       Tata BVR, Boda D, Henderson D, et al.
             Structure of charged colloids under a wedge confinement
             PHYSICAL REVIEW E 62 (3): 3875-3881 Part B SEP 2000
10_15.       Tata BVR, Ise N
             Comment on "Monte Carlo study of structural ordering in charged colloids using a
             long-range attractive interaction" - Reply
             PHYSICAL REVIEW E 61 (1): 983-985 JAN 2000

11.       S. Vaidyanathan, V. Moorthy, T. Jayakumar and Baldev Raj
          Evaluation of induction hardened case depth through microstructural characterisation using
          magnetic Barkhausen emission technique
          MATERIALS SCIENCE AND TECHNOLOGY 16 (2): 202-208 FEB 2000

          Times Cited (without Self Citation): 14                             Times Cited:   19

  11_1.        Nondestructive inspection of plastic deformation in commercial carbon steels using
               magnetic Barkhausen noise
               Rodriguez JL, Perez-Benitez JA, Capo-Sanchez J, et al.
               REVISTA MEXICANA DE FISICA Volume: 54 Issue: 2 Pages: 51-53 Supplement:
               Suppl. S Published: NOV 2008
  11_2.        Off-line measurement of decarburization of steels using a multifrequency
               electromagnetic sensor
               Hao XJ, Yin W, Strangwood M, et al.
               SCRIPTA MATERIALIA Volume: 58 Issue: 11 Pages: 1033-1036 Published: JUN
               2008
               Characterization of aging-induced microstructural changes in M250 maraging steel
  11_3.
               using magnetic parameters
               Rajkumar KV, Vaidyanathan S, Kumar A, et al.
               JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS Volume: 312 Issue: 2
               Pages: 359-365 Published: MAY 11 2007
  11_4.        Moorthy V, Shaw BA, Hopkins P
               Surface and subsurface stress evaluation in case-carburised steel using high and low
               frequency magnetic Barkhausen emission measurements
               Journal Of Magnetism And Magnetic Materials 299 (2): 362-375 APR 2006

  11_5.        Moorthy V, Shaw BA, Mountford P, et al.
               Magnetic Barkhausen emission technique for evaluation of residual stress alteration
               by grinding in case-carburised En36 steel
               ACTA MATERIALIA 53 (19): 4997-5006 NOV 2005

  11_6.        Blaow M, Evans JT, Shaw BA
               Surface decarburisation of steel detected by magnetic Barkhausen emission
               JOURNAL OF MATERIALS SCIENCE 40 (20): 5517-5520 OCT 2005

  11_7.        Moorthy V, Shaw BA, Hopkins P
               Magnetic Barkhausen emission technique for detecting the overstressing during
               bending fatigue in case-carburised En36 steel
               NDT & E INTERNATIONAL 38 (2): 159-166 MAR 2005

  11_8.        Blaow M, Evans JT, Shaw B
               Effect of deformation in bending on magnetic Barkhausen noise in low alloy steel
               Materials Science And Engineering A-Structural Materials Properties Microstructure
               And Processing 386 (1-2): 74-80 NOV 25 2004

  11_9.        Lo CCH
               A review of the barkhausen effect and its applications to nondestructive testing
               MATERIALS EVALUATION 62 (7): 741-748 JUL 2004

 11_10.        Moorthy V, Shaw BA, Brimble K
               Testing of case depth in case carburized gear steels using magnetic barkhausen
               emission technique

      Source: Web of Science & Google Scholar (As on 03-03-2009)                      Page 14 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

               MATERIALS EVALUATION 62 (5): 523-527 MAY 2004

 11_11.        Moorthy V, Shaw BA, Day S
               Evaluation of applied and residual stresses in case-carburised En36 steel subjected to
               bending using the magnetic Barkhausen emission technique
               ACTA MATERIALIA 52 (7): 1927-1936 APR 2004

 11_12.        Moorthy V, Shaw BA, Evans JT
               Evaluation of tempering induced changes in the hardness profile of case-carburised
               EN36 steel using magnetic Barkhausen noise analysis
               NDT & E INTERNATIONAL 36 (1): 43-49 JAN 2003

 11_13.        Jiang GX, Kato H, Yoshida Y, et al.
               Optimization of ultrasonic measurement of remelted zone thickness using
               backscattered waves
               NDT & E INTERNATIONAL 35 (4): 221-225 JUN 2002

 11_14.        Jiang GX, Kato H, Yoshida Y, et al.
               Influence of incident angle of ultrasonic waves on thickness measurement of remelted
               zone formed on aluminum alloy castings
               MATERIALS EVALUATION 59 (12): 1421-1425 DEC 2001



12.      John Philip, G. Gnana Prakash, T. Jayakumar, P. Kalyanasundaram, O. Mondain-Monval
         and Baldev Raj
         Interaction between emulsion droplets in the presence of polymer-surfactant complexes
         LANGMUIR 18 (12): 4625-4631 JUN 11 2002
         Times Cited (without self citation): 10                           Times Cited:16

12_1.      Effect of Surfactant Monolayer on Reduction of Fe3O4 Nanoparticles under Vacuum
           Ayyappan S, Gnanaprakash G, Panneerselvam G, et al.
           JOURNAL OF PHYSICAL CHEMISTRY C           Vol.112 (47), 18376-18383      NOV 27 2008

12_2.      Chau TT, Dagstine RR, Grieser F, et al.
           Direct force measurement at liquid-liquid interfaces
           SOLVENT EXTRACTION RESEARCH AND DEVELOPMENT-JAPAN                 Vol.15 (1-10) 2008

12_3.      Sanfeld A, Steinchen A
           Emulsions stability, from dilute to dense emulsions - Role of drops deformation
           ADVANCES IN COLLOID AND INTERFACE SCIENCE               Volume: 140   Issue: 1    Pages: 1-
           65 Published: JUL 1 2008

12_4.      Tcholakova S, Denkov ND, Lips A
           Comparison of solid particles, globular proteins and surfactants as emulsifiers
           PHYSICAL CHEMISTRY CHEMICAL PHYSICS           Volume: 10     Issue: 12   Pages: 1608-1627
           Published: 2008
           Kleshchanok D, Tuinier R, Lang PR
12_5.
           Direct measurements of polymer-induced forces
           JOURNAL OF PHYSICS-CONDENSED MATTER Volume: 20                Issue: 7 Article Number:
           073101 Published: FEB 20 2008
12_6.      Tulpar A, Tilton RD, Walz JY
           Synergistic effects of polymers and surfactants on depletion forces
           LANGMUIR 23 (8): 4351-4357 APR 10 2007

12_7.      Do Amaral M, Van Es S, Asua JM
           Effect of the particle size distribution on the low shear viscosity of high-solid-content
           latexes
           Journal Of Polymer Science Part A-Polymer Chemistry 42 (16): 3936-3946 Aug 15 2004

12_8.      Baudry J, Bertrand E, Lequeux N, et al.

      Source: Web of Science & Google Scholar (As on 03-03-2009)                       Page 15 of 65
                               Citations of Dr. Baldev Raj
                            Distinguished Scientist & Director, IGCAR

          Bio-specific recognition and applications: from molecular to colloidal scales
          JOURNAL OF PHYSICS-CONDENSED MATTER 16 (15): R469-R480 APR 21 2004

12_9.     Dagastine RR, Stevens GW, Chan DYC, et al.
          Forces between two oil drops in aqueous solution measured by AFM
          JOURNAL OF COLLOID AND INTERFACE SCIENCE 273 (1): 339-342 MAY 1 2004

12_10.    McNamee CE, Tsujii Y, Ohshima H, et al.
          Interaction forces between two hard surfaces in particle-containing aqueous systems
          LANGMUIR 20 (5): 1953-1962 MAR 2 2004

13.      V. Rajendran, N. Palanivelu, P. Palanichamy, T. Jayakumar, Baldev Raj and B.K.
         Choudhary
         Ultrasonic characterisation of ferroelectric BaTiO3 doped lead bismuth oxide semi-
         conducting glasses
         JOURNAL OF NON-CRYSTALLINE SOLIDS 296 (1-2): 39-49 DEC 2001

         Times Cited (without Self Citation): 15                             Times Cited:     15

 13_1.      Synthesis of barium titanate nanoparticles via a novel electrochemical route
            Tao J, Ma J, Wang Y, et al.
            MATERIALS RESEARCH BULLETIN Volume: 43 Issue: 3 Pages: 639-644
            Published: MAR 4 2008
 13_2.      Rajendran V, Devi AVG, Azooz M, et al.
            Physicochemical studies of phosphate based P2O5-Na2O-CaO-TiO2 glasses for
            biomedical applications
            JOURNAL OF NON-CRYSTALLINE SOLIDS 353 (1): 77-84 JAN 1 2007
 13_3.      Begum AN, Rajendran V
            Structure and elastic properties of TeO2-BaF2 glasses
            JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS 67 (8): 1697-1702 AUG 2006


 13_4.      Manupriya, Thind KS, Sharma G, et al.
            Structural and acoustic investigations of calcium borate glasses
            Physica Status Solidi A-Applications and Materials Science 203 (10): 2356-2364 AUG
            2006
 13_5.      El-Moneim AA
            Quantitative analysis of ultrasonic attenuation in TiO2-doped CaO-Al2O3-B2O3
            glasses
            MATERIALS CHEMISTRY AND PHYSICS 98 (2-3): 261-266 AUG 1 2006
 13_6.      Devi AVG, Rajendran V, Jeyasubramanian K, et al.
            Ultrasonic investigation on nanocrystalline barium borate (BBO) glass ceramics
            Synthesis And Reactivity In Inorganic Metal-Organic And Nano-Metal Chemistry 36
            (2): 215-219 2006
 13_7.      Begum AN, Rajendran V, Ylanen H
            Effect of thermal treatment on physical properties of bioactive glass
            MATERIALS CHEMISTRY AND PHYSICS 96 (2-3): 409-417 APR 10 2006
 13_8.      Sharma G, Singh K, Manupriya, et al.
            gamma-Irradiation effect on the acoustical properties of zinc lead borate glasses
            Physica Status Solidi A-Applications And Materials Science 202 (14): 2720-2730 Nov
            2005
 13_9.      Rajendran V, Begum AN, Azooz MA, and El- Batal F H
            Effect of thermal treatment on elastic properties of SiO2-Na2O-CaO-P2O5 glasses for
            biomedical applications
            MATERIALS LETTERS 58 (1-2): 211-215 JAN 2004
13_10.      Rajendran V, Kumaran SM, Sivasubramanian V, et al.
            Anomalies in ultrasonic velocity and attenuation in Nd0.67Sr0.33MnO3 perovskite
            PHYSICA B-CONDENSED MATTER 336 (3-4): 261-266 AUG 2003


13_11.      Peng ZF, Chen Y
            Preparation of BaTiO3 nanoparticles in aqueous solutions

   Source: Web of Science & Google Scholar (As on 03-03-2009)                       Page 16 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

             MICROELECTRONIC ENGINEERING 66 (1-4): 102-106 APR 2003
 13_12.      Rajendran V, Palanivelu N, Chaudhuri BK, et al.
             Characterisation of semiconducting V2O5-Bi2O3-TeO2 glasses through ultrasonic
             measurements
             JOURNAL OF NON-CRYSTALLINE SOLIDS 320 (1-3): 195-209 JUN 1 2003
 13_13.      Rajendran V, Palanivelu N, Chaudhuri BK, et al.
             Influence of BaTiO3 on semiconducting V2O5-Bi2O3-TeO2 oxide glasses through
             ultrasonic studies
             JOURNAL OF MATERIALS SCIENCE LETTERS 21 (20): 1619-1622 OCT 15 2002
 13_14.      Rajendran V, Begum AN, Azooz MA, et al.
             Microstructural dependence on relevant physical-mechanical properties on SiO2-Na2O-
             CaO-P2O5 biological glasses
             BIOMATERIALS 23 (21): 4263-4275 NOV 2002
 13_15.      Rajendran V, Palanivelu N, Chaudhuri BK, et al.
             Temperature and composition dependence of the elastic properties of semiconducting
             (100-x)V2O5-xPbO oxide glasses
             Physica Status Solidi A - Applied Research 191 (2): 445-457 JUN 16 2002

14.      V. Moorthy, S. Vaidyanathan, T. Jayakumar and Baldev Raj
         Effect of tensile deformation on micro magnetic parameters in 0.2% carbon steel and
         2.25Cr-1Mo steel
         ACTA MATERIALIA 47 (6): 1869-1878 APR 23 1999

         Times Cited (without Self Citation): 15                                Times Cited:   15

  14_1.        Comparison of Properties of Magnetoacoustic Emission and Mechanical Barkhausen
               Effects for P91 Steel After Plastic Flow and Creep
               Augustyniak B, Chmielewski M, Piotrowski L, et al.
               IEEE Transactions On Magnetics Vol.44(11): 3273-3276        Part: Part 1, NOV 2008
  14_2.        Study of the effect of process parameters in high-speed grinding on surface integrity
               by Barkhausen noise analysis
               Vashista M, Paul S
               PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL
               OF ENGINEERING MANUFACTURE Vol.222(12): 1625-1637

  14_3.        Yoshida F, Kaneda Y, Yamamoto S
               A plasticity model describing yield-point phenomena of steels and its application to FE
               simulation of temper rolling
               INTERNATIONAL JOURNAL OF PLASTICITY          Volume: 24   Issue: 10   Pages: 1792-
               1818 Published: OCT 2008

  14_4.        Perevertov O
               Influence of the residual stress on the magnetization process in mild steel
               JOURNAL OF PHYSICS D-APPLIED PHYSICS 40 (4): 949-954 FEB 21 2007

  14_5.        Moorthy V, Shaw BA, Hopkins P
               Surface and subsurface stress evaluation in case-carburised steel using high and low
               frequency magnetic Barkhausen emission measurements
               Journal Of Magnetism And Magnetic Materials 299 (2): 362-375 APR 2006

  14_6.        Moorthy V, Shaw BA, Mountford P, et al.
               Magnetic Barkhausen emission technique for evaluation of residual stress alteration
               by grinding in case-carburised En36 steel
               ACTA MATERIALIA 53 (19): 4997-5006 NOV 2005

  14_7.        Moorthy V, Shaw BA, Hopkins P
               Magnetic Barkhausen emission technique for detecting the overstressing during
               bending fatigue in case-carburised En36 steel
               NDT & E INTERNATIONAL 38 (2): 159-166 MAR 2005



      Source: Web of Science & Google Scholar (As on 03-03-2009)                      Page 17 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

  14_8.        Iordache VE, Hug E
               Effect of mechanical strains on the magnetic properties of electrical steels
               Journal Of Optoelectronics And Advanced Materials 6 (4): 1297-1303 DEC 2004

  14_9.        Blaow M, Evans JT, Shaw B
               Effect of deformation in bending on magnetic Barkhausen noise in low alloy steel
               Materials Science And Engineering A-Structural Materials Properties Microstructure
               And Processing 386 (1-2): 74-80 NOV 25 2004

 14_10.        Kleber X, Vincent A
               On the role of residual internal stresses and dislocations on Barkhausen noise in
               plastically deformed steel
               NDT & E INTERNATIONAL 37 (6): 439-445 SEP 2004

 14_11.        Moorthy V, Shaw BA, Day S
               Evaluation of applied and residual stresses in case-carburised En36 steel subjected to
               bending using the magnetic Barkhausen emission technique
               ACTA MATERIALIA 52 (7): 1927-1936 APR 2004

 14_12.        Capo-Sanchez J, Perez-Benitez JA, Padovese LR, et al.
               Dependence of the magnetic Barkhausen emission with carbon content in commercial
               steels
               JOURNAL OF MATERIALS SCIENCE 39 (4): 1367-1370 FEB 15 2004

 14_13.        Iordache VE, Hug E, Buiron N
               Magnetic behaviour versus tensile deformation mechanisms in a non-oriented Fe-(3
               wt.%)Si steel
               Materials Science And Engineering A-Structural Materials Properties Microstructure
               And Processing 359 (1-2): 62-74 OCT 25 2003

 14_14.        Ng DHL, Cho KS, Wong ML, et al.
               Study of microstructure, mechanical properties, and magnetization process in low
               carbon steel bars by Barkhausen emission
               Materials Science And Engineering A-Structural Materials Properties Microstructure
               And Processing 358 (1-2): 186-198 OCT 15 2003

 14_15.        Kleber X, Borrelly R, Vincent A
               Barkhausen noise and thermoelectric power applied to study microstructural
               evolutions in metallic alloys
               REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES 98 (2): 201+ FEB
               2001



15.       R. Krishnan, S. Dash, C. Babu Rao, R.V. Subba Rao, A.K. Tyagi and Baldev Raj
          Laser induced structural and microstructural transformations of plasma sprayed Al2O3
          coatings
          SCRIPTA MATERIALIA 45 (6): 693-700 SEP 28 2001

          Times Cited (without self citation): 10                             Times Cited :   15

15_1.         De Riccardis MF, Carbone D, Piscopiello E, et al.
              Electron beam treatments of electrophoretic ceramic coatings
              APPLIED SURFACE SCIENCE Volume: 254 Issue: 6 Pages: 1830-1836                Published:
              JAN 15 2008
15_2.         Ctibor P, Kraus L, Tuominen J, et al.
              Improvement of mechanical properties of alumina and zirconia plasma sprayed
              coatings induced by laser post-treatment
              CERAMICS-SILIKATY Volume: 51 Issue: 4 Pages: 181-189 Published: 2007
15_3.         Fan DH, Ding GQ, Shen WZ, et al.
              Anion impurities in porous alumina membranes: Existence and functionality
              MICROPOROUS AND MESOPOROUS MATERIALS 100 (1-3): 154-159 MAR 23 2007
15_4.         Sun XY, Xu FQ, Li ZM, et al.
              Photoluminescence properties of anodic alumina membranes with ordered nanopore

      Source: Web of Science & Google Scholar (As on 03-03-2009)                      Page 18 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

              arrays
              JOURNAL OF LUMINESCENCE 121 (2): 588-594 Sp. Iss. SI DEC 2006
15_5.         Harimkar SP, Dahotre NB
              Crystallographic and morphological textures in laser surface modified alumina ceramic
              JOURNAL OF APPLIED PHYSICS 100 (2): Art. No. 024901 JUL 15 2006
15_6.         Xu WL, Zheng MJ, Wu S, et al.
              Effects of high-temperature annealing on structural and optical properties of highly
              ordered porous alumina membranes
              APPLIED PHYSICS LETTERS 85 (19): 4364-4366 NOV 8 2004
15_7.         Li JF, Li L, Stott EH
              Statistical approach for minimizing cracks in combined flame spraying and laser surface
              modification of refractory ceramics
              JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 24 (13): 3509-3520 2004
15_8.         Li JF, Li L, Stott FH
              Crystallographical analysis of surface layers of refractory ceramics formed using
              combined flame spray and simultaneous laser treatment
              JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 24 (10-11): 3129-3138 SEP 2004
15_9.         Li JF, Li L, Stott FH
              Multi-layered surface coatings of refractory ceramics prepared by combined laser and
              flame spraying
              SURFACE & COATINGS TECHNOLOGY 180: 500-505 MAR 1 2004
15_10.        Li JF, Li L, Stott FH
              Combined laser and flame surface coating of refractory ceramics: phase and
              microstructural characteristics
              THIN SOLID FILMS 453: 67-71 Sp. Iss. SI APR 1 2004

16.     S. Murugan, Sanjai K. Rai, P.V. Kumar, T. Jayakumar, Baldev Raj and M.S.C. Bose
        Temperature distribution and residual stresses due to multipass welding in type 304 stainless
        steel and low carbon steel weld pads
        International Journal Of Pressure Vessels And Piping 78 (4): 307-317 APR 2001

        Times Cited (without self citation): 10+                                    Times Cited: 15

16_1.         Xu JJ, Chen LG, Ni CZ
              Effect of vibratory weld conditioning on the residual stresses and distortion in
              multipass girth-butt welded pipes
              International Journal Of Pressure Vessels And Piping 84 (5): 298-303 MAY 2007

16_2.         Xu JJ, Chen LG, Ni CZ
              A study on the mechanical stress relieving and safety assessment without post-weld
              heat treatment
              Materials Science and Engineering A-Structural Materials Properties Microstructure And
              Processing 443 (1-2): 107-113 JAN 15 2007

16_3.         Dong ZB, Wei YH, Xu YL
              Predicting weld solidification cracks in multipass welds of SUS310 stainless steel
              COMPUTATIONAL MATERIALS SCIENCE 38 (2): 459-466 DEC 2006

16_4.         Klassek D, Suter T, Schmutz P, et al.
              The role of inclusions in the corrosion resistance of hydrostatically extruded steel
              products
              SOLID STATE PHENOMENA 114: 189-195 2006

16_5.         Dong ZB, Wei YH
              Three dimensional modeling weld solidification cracks in multipass welding
              THEORETICAL AND APPLIED FRACTURE MECHANICS 46 (2): 156-165 OCT 2006

16_6.         Xu JJ, Chen LG, Ni CZ
              Effects of vibratory weld conditioning on residual stresses and transverse contraction
              distortions in multipass welding
              Science And Technology Of Welding And Joining 11 (4): 374-378 JUL 2006



      Source: Web of Science & Google Scholar (As on 03-03-2009)                       Page 19 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

16_7.         Deng D, Murakawa H
              Numerical simulation of temperature field and residual stress in multi-pass welds in
              stainless steel pipe and comparison with experimental measurements
              COMPUTATIONAL MATERIALS SCIENCE 37 (3): 269-277 SEP 2006

16_8.         Xu JJ, Zhu ZQ, Chen LG, et al.
              Temperature distribution and residual stresses during multipass narrow gap welding of
              thick plates
              MATERIALS SCIENCE AND TECHNOLOGY 22 (2): 232-236 FEB 2006

16_9.         Jiang W, Yahiaoui K, Hall FR, et al.
              Finite element simulation of multipass welding: full three-dimensional versus
              generalized plane strain or axisymmetric models
              Journal Of Strain Analysis For Engineering Design 40 (6): 587-597 AUG 2005

16_10.        Jiang W, Yahiaoui K, Hall FR
              Finite element predictions of temperature distributions in a multipass welded piping
              branch junction
              Journal Of Pressure Vessel Technology-Trans. of the ASME 127 (1): 7-12 FEB 2005

17.     Dash, S.; Kamruddin, M.; Bera, Santanu; Ajikumar, P.K.; Tyagi, A.K.; Narasimhan, S.V.;
        and Baldev Raj,
        Temperature programmed decomposition of uranyl nitrate hexahydrate
        JOURNAL OF NUCLEAR MATERIALS 264 (3): 271-282 JAN 1999

        Times Cited (without self citation): 9                             Times Cited : 15

              Mangamma G, Ajikumar PK, Nithya R, Sairam TN, Mittal VK, Kamruddin M, Dash S
17_1.
              Tyagi AK
              Synthesis and gas phase nitridation of nanocrystalline TiO2
              JOURNAL OF PHYSICS D-APPLIED PHYSICS 40 (15): 4597-4602 AUG 7 2007

17_2.         Pagliai P, Simons SJR, Rhodes D
              A novel experimental study of temperature enhanced cohesive interparticle forces
              POWDER TECHNOLOGY 174 (1-2): 71-74 MAY 16 2007

17_3.         Chandran K, Kamruddin M, Ajikumar PK, et al.
              Kinetics of thermal decomposition of sodium methoxide and ethoxide
              JOURNAL OF NUCLEAR MATERIALS 358 (2-3): 111-128 NOV 30 2006

17_4.         Mullins D, Jarvinen G, Mayne M, et al.
              Crystallization of uranium complexes for partitioning of spent nuclear fuel
              ACS SYMPOSIUM SERIES 933: 183-197 2006

17_5.         Teijon C, Olmo R, Blanco MD, et al.
              Effect of the crosslinking degree and the nickel salt load on the thermal decomposition
              of poly (2-hydroxyethyl methacrylate) hydrogels and on the metal release from them
              JOURNAL OF COLLOID AND INTERFACE SCIENCE 295 (2): 393-400 MAR 15 2006

17_6.         Jain A, Ananthasivan K, Anthonysamy S, et al.
              Synthesis and sintering of (U0.72Ce0.28)O-2 solid solution
              JOURNAL OF NUCLEAR MATERIALS 345 (2-3): 245-253 OCT 15 2005

17_7.         Campbell T, Newton MA, Boyd V, et al.
              Effects of precursor and support variation in the genesis of uranium oxide catalysts for
              CO oxidation and selective reduction of NO: Synthesis and characterization
              JOURNAL OF PHYSICAL CHEMISTRY B 109 (7): 2885-2893 FEB 24 2005

17_8.         Azhgozhinova GS, Guven O, Pekel N, et al.
              Complex formation of linear poly (methacrylic acid) with uranyl ions in aqueous
              solutions
              JOURNAL OF COLLOID AND INTERFACE SCIENCE 278 (1): 155-159 OCT 1 2004

17_9.         Materazzi S, Curini R
              The coupling of mass spectrometry with thermoanalytical instruments: Applications of

      Source: Web of Science & Google Scholar (As on 03-03-2009)                      Page 20 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

              evolved gas analysis
              APPLIED SPECTROSCOPY REVIEWS 36 (2-3): 169-180 2001

18.     U. Kamachi Mudali, B.M. Ananda Rao, K. Shanmugam, R. Natarajan and Baldev Raj
        Corrosion and microstructural aspects of dissimilar joints of titanium and type 304L stainless
        steel
        JOURNAL OF NUCLEAR MATERIALS 321 (1): 40-48 SEP 1 2003

        Times Cited (without self citation): 9                             Times Cited :      15

18_1.         Sathiya P, Aravindan S, Haq AN
              Some experimental investigations on friction welded stainless steel joints
              MATERIALS & DESIGN       Volume: 29     Issue: 6   Pages: 1099-1109, 2008

18_2.         Ettaqi S, Langlois L, Bigot R
              Cobalt-based superalloy layers deposited on X38CrMoV5 steel base metal by explosion
              cladding process
              SURFACE & COATINGS TECHNOLOGY            Volume: 202    Issue: 14    Pages: 3306-3315
              APR 15 2008

18_3.         Manikandan P, Hokamoto K, Fujita M, et al.
              Control of energetic conditions by employing interlayer of different thickness for
              explosive welding of titanium/304 stainless steel
              JOURNAL OF MATERIALS PROCESSING TECHNOLOGY               Volume: 195     Issue: 1-3
              Pages: 232-240 Published: JAN 1 2008

18_4.         Kahraman N, Gulenc B, Findik F
              Corrosion and mechanical-micro structural aspects of dissimilar joints of Ti-6Al-4V and
              Al plates
              INTERNATIONAL JOURNAL OF IMPACT ENGINEERING 34 (8): 1423-1432 AUG 2007

18_5.         Guo W, Zhao XH, Song MZ, et al.
              Diffusion bonding of Ti-6Al-4V to QAl 10-3-1.5 with Ni/Cu interlayers
              JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 22 (6): 817-820 NOV 2006

18_6.         Manikandan P, Hokamoto K, Deribas AA, et al.
              Explosive welding of titanium/stainless steel by controlling energetic conditions
              MATERIALS TRANSACTIONS 47 (8): 2049-2055 AUG 2006

18_7.         Kahraman N, Gulenc B, Findik F
              Joining of titanium/stainless steel by explosive welding and effect on interface
              JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 169 (2): 127-133 NOV 10 2005

18_8.         Elrefaey A, Gouda M, Takahashi M, et al.
              Characterization of aluminum/steel lap joint by friction stir welding
              JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE 14 (1): 10-17 FEB 2005

18_9.         Uzun H, Donne CD, Argagnotto A, et al.
              Friction stir welding of dissimilar Al 6013-T4 To X5CrNi18-10 stainless steel
              MATERIALS & DESIGN 26 (1): 41-46 FEB 2005

19.       Anish Kumar, Vani Shankar, T. Jayakumar, K. Bhanu Sankara Roa and Baldev Raj
          Correlation of microstructure and mechanical properties with ultrasonic velocity in the
          Ni-based superalloy Inconel 625
          Philosophical Magazine A-Physics of Condensed Matter Structure Defects and Mechanical
          Properties 82 (13): 2529-2545 SEP 2002

          Times Cited (without self citation): 4 __                               Times Cited : 15

19_1.        Murthy GVS, Ghosh S, Das M, et al.
             Correlation between ultrasonic velocity and indentation-based mechanical properties

      Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 21 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

             with microstructure in Nimonic 263
             MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES
             MICROSTRUCTURE AND PROCESSING Volume: 488 Issue: 1-2 Pages: 398-405
             Published: AUG 15 2008
19_2.        Kumar A, Rabe U, Hirsekorn S, et al.
             Elasticity mapping of precipitates in polycrystalline materials using atomic force
             acoustic microscopy
             APPLIED PHYSICS LETTERS       Volume: 92     Issue: 18 Article Number: 183106
             Published: MAY 5 2008
19_3.        Liu XB, Takamori S, Osawa Y
             Effect of matrix structure on ultrasonic attenuation of ductile cast iron
             JOURNAL OF MATERIALS SCIENCE 42 (1): 179-184 JAN 2007
19_4.        Shankar V, Valsan M, Rao KBS and Mannan S L
             Effects of temperature and strain rate on tensile properties and activation energy for
             dynamic strain aging in alloy 625
             Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science
             35A (10): 3129-3139 OCT 2004

20.       P. Palanichamy, M. Vasudevan, T. Jayakumar, S. Venugopal and Baldev Raj
          Ultrasonic velocity measurements for characterizing the annealing behaviour of cold
          worked austenitic stainless steel
          NDT & E INTERNATIONAL 33 (4): 253-259 JUN 2000

          Times Cited (without self citation): 5+--                            Times Cited:    14

20_1.        Characterization of creep-fatigue in ferritic 9Cr-1Mo-V-Nb steel using ultrasonic
             velocity
             Kim CS, Kwun SI, Park IK
             JOURNAL OF NUCLEAR MATERIALS Volume: 377 Issue: 3 Pages: 496-500 JUL
             15 2008
20_2.        Study of recrystallisation in interstitial free (IF) steel by ultrasonic measurements
             Pandey JC
             IRONMAKING & STEELMAKING Volume: 35 Issue: 4 Pages: 297-302 MAY 2008
20_3.        Gur CH, Cam I
             Comparison of magnetic Barkhausen noise and ultrasonic velocity measurements for
             microstructure evaluation of SAE 1040 and SAE 4140 steels
             MATERIALS CHARACTERIZATION 58 (5): 447-454 MAY 2007
20_4.        Gur CH, Tuncer BO
             Microstructural investigation of SAE 1040 steel specimens by ultrasonic
             measurements, INSIGHT 47 (7): 421-424 JUL 2005
20_5.        Palanichamy P, Vasudevan M
             Ultrasonic testing of annealing behavior and texture and determination of texture
             coefficients in stainless steel
             MATERIALS EVALUATION 61 (9): 1020-1025 SEP 2003


21.         D.K. Bhattacharya, T. Jayakumar, V. Moorthy, S. Vaidyanathan and Baldev Raj
            Characterization Of Microstructures In 17-4 PH Stainless-Steel By Magnetic Barkhausen
            Noise-Analysis
            NDT & E INTERNATIONAL 26 (3): 141-148 JUN 1993

            Times Cited (without self citation): 2+                           Times Cited:     14

21_1.       Gorkunov ES, Dragoshanskii YN, Mikhovski M
            Barkhausen noise and its utilization in structural analysis of ferromagnetic materials
            (Review article V). 5. Effects of volume and surface thermal processing
            RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING 36 (6): 389-417 JUN 2000




      Source: Web of Science & Google Scholar (As on 03-03-2009)                         Page 22 of 65
                               Citations of Dr. Baldev Raj
                            Distinguished Scientist & Director, IGCAR

21_2.      Shakshin NI, Deordiev GI, Scherbinin VE, et al.
           Evaluation of thermal ageing conditions in 17-4 pH stainless steel by Fourier descriptor
           analysis of magnetic hysteresis loops
           NDT & E INTERNATIONAL 29 (6): 379-385 DEC 1996


 22.      R. Krishnan, S. Dash, R. Kesavamoorthy, A.K. Tyagi and Baldev Raj
          Raman spectroscopic and photoluminescence investigations on laser surface modified
          alpha-Al2O3 coatings
          SCRIPTA MATERIALIA 48 (8): 1099-1104 APR 14 2003

          Times Cited (without Self Citation): 12                              Times Cited:    13

  22_1.       Castro MA, Aller AJ, McCabe A, et al.
              Spectrometric study of condensed phase species of thorium- and palladium-based
              modifiers in a complex matrix for electrothermal atomic absorption spectrometry
              JOURNAL OF ANALYTICAL ATOMIC SPECTROMETRY 22 (3): 310-317 2007

  22_2.       Fang P, He M, Xie YL, et al.
              XRD and Raman spectroscopic comparative study on phase transformation of
              gamma-Al2O3 at high temperature
              SPECTROSCOPY AND SPECTRAL ANALYSIS 26 (11): 2039-2042 NOV 2006

  22_3.       Taddei P, Affatato S, Torrecillas R, et al.
              Wear behaviour, fluorescence and SEM investigations on nanocomposite zirconia-
              toughened alumina
              JOURNAL OF MATERIALS SCIENCE 41 (16): 5310-5316 AUG 2006

  22_4.       Chevalier S, Molins R, Heintz O, et al.
              Which tool to distinguish transient alumina from alpha alumina in thermally grown
              alumina scales?
              MATERIALS AT HIGH TEMPERATURES 22 (3-4): 527-534 2005

  22_5.       Mishina ED, Sherstyuk NK, Val'dnera VO, et al.
              Nonlinear-optical and micro-raman diagnostics of thin films and nanostructures of
              ABO(3) ferroelectrics
              PHYSICS OF THE SOLID STATE 48 (6): 1210-1213 JUN 2006

  22_6.       Taddei P, Affatato S, Fagnano C, et al.
              Photoluminescence investigations on alumina ceramic bearing couples tested under
              different angles of inclination in a Hip joint simulator
              JOURNAL OF MATERIALS SCIENCE 41 (2): 399-407 JAN 2006

  22_7.       Castro MA, Aller AJ, McCabe A, et al.
              Spectrometric and morphological characterization of condensed phase zirconium
              species produced during electrothermal heating on a graphite platform
              JOURNAL OF ANALYTICAL ATOMIC SPECTROMETRY 20 (5): 385-394 2005

  22_8.       Laha T, Balani K, Agarwal A, et al.
              Synthesis of nanostructured spherical aluminum oxide powders by plasma
              engineering
              METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND
              MATERIALS SCIENCE 36A (2): 301-309 FEB 2005

  22_9.       Castro MA, Faulds K, Smith WE, et al.
              Characterization of condensed phase species produced during the thermal treatment
              of metal chlorides on a graphite platform using surface analysis techniques
              Spectrochimica Acta Part B-Atomic Spectroscopy 59 (12): 1935-1942 DEC 1 2004

 22_10.       Lemoine P, Quinn JP, Maguire P, et al.
              Comparing hardness and wear data for tetrahedral amorphous carbon and
              hydrogenated amorphous carbon thin films
              WEAR 257 (5-6): 509-522 SEP 2004



   Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 23 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

 22_11.        Quinn JP, Lemoine P, Maguire P, et al.
               Ultra-thin tetrahedral amorphous carbon films with strong adhesion, as measured by
               nanoscratch testing
               DIAMOND AND RELATED MATERIALS 13 (4-8): 1385-1390 APR-AUG 2004

 22_12.        Li T, Yang SG, Huang LS, et al.
               Strong photoluminescence from Cr3+ doped porous anodic alumina
               JOURNAL OF PHYSICS-CONDENSED MATTER 16 (13): 2463-2469 APR 7 2004

23.      M. Kamruddin, P.K. Ajikumar, R. Nithya, A.K. Tyagi and Baldev Raj
         Synthesis of nanocrystalline ceria by thermal decomposition and soft-chemistry methods,
         SCRIPTA MATERIALIA 50 (4): 417-422 FEB 2004

         Times Cited (without self citation): 11                                     Times Cited: 13

23_1.          Drobot DV, Chub AV, Voronov VV, et al.
               Preparation of ceria nanoparticles
               INORGANIC MATERIALS Volume: 44 Issue: 8             Pages: 853-855    AUG 2008
23_2.          Zawadzki M
               Preparation and characterization of ceria nanoparticles by microwave-assisted
               solvothermal process
               JOURNAL OF ALLOYS AND COMPOUNDS Volume: 454 Issue: 1-2 Pages: 347-351
               Published: APR 24 2008
23_3.          Omata T, Goto Y, Otsuka-Yao-Matsuo S
               Nanocrystals of zirconia- and ceria-based solid electrolytes: Syntheses and properties
               SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS Volume: 8 Issue: 6
               Pages: 524-530 Published: SEP 2007
23_4.          Hadi A, Yaacob II
               Novel synthesis of nanocrystalline CeO2 by mechanochemical and water-in-oil
               microemulsion methods
               MATERIALS LETTERS 61 (1): 93-96 JAN 2007
23_5.          Materazzi S, Gentili A, Curini R.,
               Applications of evolved gas analysis - Part 2: EGA by mass spectrometry
               TALANTA 69 (4): 781-794 JUN 15 2006
23_6.          Yang HM, Huang CH, Tang AD, et al.,
               Microwave-assisted synthesis of ceria nanoparticles
               MATERIALS RESEARCH BULLETIN 40 (10): 1690-1695 OCT 6 2005
23_7.          Sayle TXT, Parker SC, Sayle DC.,
               Oxidising CO to CO2 using ceria nanoparticles
               PHYSICAL CHEMISTRY CHEMICAL PHYSICS 7 (15): 2936-2941 2005
23_8.          Bianchi D.,
               Catalytic oxidation of a diesel soot formed in the presence of a cerium additive. III.
               Microkinetic-assisted method for the improvement of the ignition temperature
               ENERGY & FUELS 19 (4): 1453-1461 JUL-AUG 2005
23_9.          Vasylkiv O, Kolodiazhnyi T, Sakka Y, et al.,
               Synthesis and characterization of nanosize ceria-gadolinia powders
               JOURNAL OF THE CERAMIC SOCIETY OF JAPAN 113 (1313): 101-106 JAN 2005
23_10.         Di Monte R, Kaspar J.,
               Nanostructured CeO2-ZrO2 mixed oxides,
               JOURNAL OF MATERIALS CHEMISTRY 15 (6): 633-648 2005
23_11.         Zhang F, Wang P, Koberstein J, et al.,
               Cerium oxidation state in ceria nanoparticles studied with X-ray photoelectron
               spectroscopy and absorption near edge spectroscopy
               SURFACE SCIENCE 563 (1-3): 74-82 AUG 10 2004




      Source: Web of Science & Google Scholar (As on 03-03-2009)                       Page 24 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

24.     J Philip, G Gnanaprakash, T Jayakumar, P, Kalyanasundaram P, Raj B
        Three Distinct Scenarios under Polymer, Surfactant, and Colloidal Interaction,
        Macromolecules 2003, 36, 9230-9236

        Times Cited (without self citation): 5                                 Times Cited : 13

 24_1.       Koytepe S, Seckin T
             Molecular design of Fe3O4-containing polyimide as a route to nanomagnetic materials
             INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH Volume: 47 Issue: 12
             pp.4123-4130 JUN 18 2008
 24_2.       Ramirez JC, Herrera-Ordonez J
             Kinetic aspects of styrene minisuspension polymerization using a mixture PVA-SDS as
             stabilizer: Effect of the time of addition of SDS
             EUROPEAN POLYMER JOURNAL 43 (9): 3819-3825 SEP 2007
 24_3.       Helseth LE
             Paramagnetic particles as sensitive force detectors in liquids
             JOURNAL OF PHYSICS D-APPLIED PHYSICS 40 (10): 3030-3037 MAY 21 2007
 24_4.       Jorge C. Ramireza, Jorge Herrera-Ordoneza and Virgilio A. Gonzalezb, Kinetics of
             styrene minisuspension polymerization using a mixture PVA–SDS as stabilizer,
             Polymer, Vol.47(10), 3 May 2006, Pages 3336-3343
 24_5.       A Koenig, P Hébraud, C Gosse, R Dreyfus, J Baudry, E. Bertrand and J. Bibette,
             Magnetic Force Probe for Nanoscale Biomolecules, Phys. Rev. Lett. 95, 128301 (2005)

25.          Stretching and collapse of neutral polymer layers under association with ionic
             surfactants
             Philip, J; Gnana Prakash, G; Jayakumar, T; Kalyanasundaram, P; Baldev Raj;
             Physical Review Letters
             89 (26): Art. No. 268301 DEC 23 2002

             Times Cited (without self citation): 2+..                           Times Cited:   13

25_1         Helseth LE
             Paramagnetic particles as sensitive force detectors in liquids
             Journal Of Physics D-Applied Physics 40 (10): 3030-3037 MAY 21 2007
25_2         Koytepe S, Seckin T
             Molecular design of Fe3O4-containing polyimide as a route to nanomagnetic materials
             INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH Volume: 47 Issue: 12 pp.
             4123-4130, JUN 18 2008


26.    Baldev Raj, V. Moorthy, T. Jayakumar and K. Bhanu Sankara Rao
       Assessment of microstructures and mechanical behaviour of metallic materials through non-
       destructive characterisation
       INTERNATIONAL MATERIALS REVIEWS 48 (5): 273-325 OCT 2003

       Times Cited (without self citation): 5+..                                 Times Cited :12

 26_1.       Ohtani T
             Creep-induced microstructural evolution and acoustic characterization in tempered
             martensitic stainless steel
             Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science
             38A (7): 1587-1597 JUL 2007

 26_2.       Ohtani T, Ogi H, Hirao M
             Electromagnetic acoustic resonance to assess creep damage in Cr-Mo-V steel
             JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF
             COMMUNICATIONS & REVIEW PAPERS 45 (5B): 4526-4533 MAY 2006

 26_3.       Ohtani T, Ogi H, Hirao M
             Evolution of microstructure and acoustic damping during creep of a Cr-Mo-V ferritic
             steel, ACTA MATERIALIA 54 (10): 2705-2713 JUN 2006

 26_4.       Ohtani T, Ogi H, Hirao M
             Creep-induced microstructural change in 304-type austenitic stainless steel
             Journal Of Engineering Materials And Technology-Transactions Of The ASME 128 (2):

      Source: Web of Science & Google Scholar (As on 03-03-2009)                     Page 25 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

             234-242 APR 2006

 26_5.       Ohtani T
             Acoustic damping characterization and microstructure evolution during high-
             temperature creep of an austenitic stainless steel
             Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science
             36A (11): 2967-2977 NOV 2005



27.     Anish Kumar, T. Jayakumar, P. Palanichamy and Baldev Raj
        Influence of grain size on ultrasonic spectral parameters in AISI type 316 stainless steel
        SCRIPTA MATERIALIA 40 (3): 333-340 JAN 8 1999

        Times Cited (without self citation): 4                     Times Cited :   12

27_1.        Zagan R, Petculescu P
             Ultrasonic spectroscopy of welded cryogenic materials
             Journal Of Optoelectronics And Advanced Materials 9 (6): 1803-1807 JUN 2007
27_2.        Ju JW, Weng LS, Liu Y
             Ultrasonic frequency-dependent amplitude attenuation characteristics technique for
             nondestructive evaluation of concrete
             ACI MATERIALS JOURNAL 103 (3): 177-185 MAY-JUN 2006
27_3.        Kumar A, Choudhary BK, Laha K, et al.
             Characterisation of microstructure in 9 % chromium ferritic steels using ultrasonic
             measurements
             TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS 56 (5): 483-497 OCT 2003
27_4.        Gur CH, Keles Y
             Ultrasonic characterisation of hot-rolled and heat-treated plain carbon steels
             INSIGHT 45 (9): 615-620 SEP 2003

28.     C.K. Mukhopadhyay, K.V. Kasiviswanathan, T. Jayakumar and Baldev Raj
        Acoustic-Emission During Tensile Deformation Of Annealed And Cold-Worked AISIType 304
        Austenitic Stainless-Steel
        Journal Of Materials Science 28 (1): 145-154 JAN 1 1993

        Times Cited (without self citation): 2+..                  Times Cited:    12

28_1.       O'Sullivan D, Cotterell A
            Machinability of austenitic stainless steel SS303
            JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 124 (1-2): 153-159 JUN 10 2002
28_2.       Skare T, Thilderkvist P, Stahl JE
            Monitoring of friction processes by the means of acoustic emission measurements -
            deep drawing of sheet metal
            JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 80-1: 263-272 AUG-SEP 1998

29.    Anish Kumar, T. Jayakumar, Baldev Raj and K.K. Ray
       Correlation between ultrasonic shear wave velocity and Poisson's ratio for isotropic solid
       materials
       ACTA MATERIALIA 51 (8): 2417-2426 MAY 7 2003

       Times Cited (without self citation): 8+..                             Times Cited: 11

29_1.        Phani KK, Sanyal D
             The relations between the shear modulus, the bulk modulus and Young's modulus for
             porous isotropic ceramic materials
             Materials Science And Engineering A-Structural Materials Properties Microstructure
             and Processing Vol.490 (1-2) pp.305-312, AUG 25 2008

29_2.        Kumar A, Rabe U, Hirsekorn S, et al.
             Elasticity mapping of precipitates in polycrystalline materials using atomic force

      Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 26 of 65
                             Citations of Dr. Baldev Raj
                           Distinguished Scientist & Director, IGCAR

          acoustic microscopy
          APPLIED PHYSICS LETTERS, Vol.92 (18) Article Number: 183106, 2008

29_3.     Phani KK
          Correlation between ultrasonic shear wave velocity and Poisson's ratio for isotropic
          porous materials
          JOURNAL OF MATERIALS SCIENCE         Volume: 43       Issue: 1   Pages: 316-323
          Published: JAN 2008

29_4.     Phani KK
          Estimation of elastic properties of porous ceramic using ultrasonic longitudinal wave
          velocity only
          Journal of the American Ceramic Society 90 (7): 2165-2171 JUL 2007

29_5.     Tamura S, Fukuhara M, Inoue A
          Changes in mechanical properties of Zr-based bulk metallic glass under linear heating
          and cooling
          JOURNAL OF APPLIED PHYSICS 101 (7): Art. No. 073520 APR 1 2007

29_6.     Gercek H
          Poisson's ratio values for rocks
          International Journal of Rock Mechanics And Mining Sciences 44 (1): 1-13 JAN 2007

29_7.     Tang SH, Kobayashi M, Pan HL
          Ultrasonic characterization of point defects induced by cross slip under pure shear
          Theoretical and Applied Fracture Mechanics 43 (2): 169-180 MAY 2005

29_8.     Jayan V, Khan MY, Husain M
          Coarsening of nano sized carbide particles in 2.25Cr-1Mo power plant steel after
          extended service
          MATERIALS LETTERS 58 (21): 2569-2573 AUG 2004



30.       U. Kamachi Mudali, T.M. Sridhar, N. Eliaz and Baldev Raj
          Failures of stainless steel orthopaedic devices - Causes and remedies
          CORROSION REVIEWS 21 (2-3): 231-267 2003

          Times Cited (without self citation): 7+..                          Times Cited: 11

 30_1.    Vadiraj A, Kamaraj M
          Effect of plasma nitriding on fretting fatigue damage of surgical grade titanium alloys
          Transactions Of The Indian Institute Of Metals 59 (4): 503-509 AUG 2006
 30_2.    Vadiraj A, Kamaraj M, Mudali UK, et al.
          Effect of surface modified layers on fretting fatigue damage of biomedical titanium
          alloys
          MATERIALS SCIENCE AND TECHNOLOGY 22 (9): 1119-1125 SEP 2006
30_3.     Vadiraj A, Kamaraj M
          Fretting fatigue studies of titanium nitride-coated biomedical titanium alloys
          Journal Of Materials Engineering and Performance 15 (5): 553-557 OCT 2006
30_4.     Vadiraj A, Kamaraj M
          Effect of surface treatments on fretting fatigue damage of biomedical titanium alloys
          TRIBOLOGY INTERNATIONAL 40 (1): 82-88 JAN 2007
30_5.     Vadiraj A, Kamaraj M
          Characterization of fretting fatigue damage of PVD TiN coated biomedical titanium
          alloys
          SURFACE & COATINGS TECHNOLOGY 200 (14-15): 4538-4542 APR 10 2006
30_6.     Vadiraj A, Kamaraj M
          Damage characterization of unmodified and surface modified medical grade titanium
          alloys under fretting fatigue condition
          MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES
          MICROSTRUCTURE AND PROCESSING 416 (1-2): 253-260 JAN 25 2006


   Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 27 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

30_7.        Sridhar TM, Mudali UK
             Development of bioactive hydroxyapatite coatings on type 316L stainless steel by
             electrophoretic deposition for orthopaedic applications
             Transactions Of The Indian Institute Of Metals 56 (3): 221-230 JUN 2003


31.          R. Krishnan, S. Dash, R. Kesavamoorthy, C. Babu Rao, A.K. Tyagi and Baldev Raj
             Laser surface modification and characterization of air plasma sprayed alumina
             coatings
             Surface & Coatings Technology 200 (8): 2791-2799 JAN 24 2006

             Times Cited (without self citation): 5+..                     Times Cited :     11

31_1.        Robin PC, Gitzhofer F, Fauchais PL, et al.
             Lamb waves monitoring of the thermomechanical aging effects in ceramic coatings
             Surface & Coatings Technology 201 (18): 7764-7774 JUN 25 2007

31_2.        Bandyopadhyay PP, Balla VK, Bose S, et al.
             Compositionally graded aluminum oxide coatings on stainless steel using laser
             processing
             Journal of the American Ceramic Society 90 (7): 1989-1991 Jul 2007

31_3.        Iwaszko J
             Surface remelting treatment of plasma-sprayed Al2O3 wt.% TiO2 coatings
             SURFACE & COATINGS TECHNOLOGY 201 (6): 3443-3451 DEC 4 2006

31_4.        Harimkar SP, Dahotre NB
             Effect of laser fluence on surface microstructure of alumina ceramic
             Advances in Applied Ceramics 105 (6): 304-308 DEC 2006

31_5.        Harimkar SP, Dahotre NB
             Crystallographic and morphological textures in laser surface modified alumina
             ceramic, JOURNAL OF APPLIED PHYSICS 100 (2): Art. No. 024901 JUL 15 2006
32.      Baldev Raj, Jha BB, Rodriguez P
         Frequency-Spectrum Analysis of Acoustic-Emission Signal obtained during Tensile
         Deformation and Fracture of an AISI-316 Type Stainless-Steel
         ACTA METALLURGICA 37 (8): 2211-2215 AUG 1989

         Times Cited (without self citation): 5 +..                             Times Cited:      11

32_1.       Mukherjee M, Mohanty ON, Hashimoto S, et al.
            Acoustic emission technique to study the effect of strain rate on the deformation
            behaviour of TRIP aided steels with different matrix microstructures
            ISIJ INTERNATIONAL 46 (8): 1241-1250 2006

32_2.       Van Bohemen SMC, Sietsma J, Hermans MJM, et al.
            Analysis of acoustic emission signals originating from bainite and martensite
            formation
            PHILOSOPHICAL MAGAZINE 85 (16): 1791-1804 JUN 1 2005

32_3.       Lee CS, Huh JH, Li DM, et al.
            Acoustic emission behavior during tensile tests of low carbon steel welds
            ISIJ INTERNATIONAL 39 (4): 365-370 1999

32_4.       Beccaria M, Bernardini M, Braccini S, et al.
            The creep problem in the VIRGO suspensions: a possible solution using Maraging steel
            Nuclear Instruments & Methods In Physics Research Section A-Accelerators
            Spectrometers Detectors and Associated Equipment 404 (2-3): 455-469 FEB 21 1998

32_5.       JU L, BLAIR DG
            Low Resonant-Frequency Cantilever Spring Vibration Isolator for Gravitational-Wave
            Detectors
            REVIEW OF SCIENTIFIC INSTRUMENTS 65 (11): 3482-3488 NOV 1994


      Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 28 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR



33.       Kumar A, Laha K, Jayakumar T, et al.
          Comprehensive microstructural characterization in modified 9Cr-1Mo ferritic steel by
          ultrasonic measurements
          Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 33
          (6): 1617-1626 Jun 2002

          Times Cited (without self citation): 4+..                          Times Cited :     11

33_1.         Murthy GVS, Ghosh S, Das M, et al.
              Correlation between ultrasonic velocity and indentation-based mechanical properties
              with microstructure in Nimonic 263
              MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES
              MICROSTRUCTURE AND PROCESSING Volume: 488 Issue: 1-2 Pages: 398-405
              Published: AUG 15 2008
33_2.         Mandal S, Kumar A, Sivaprasad PV, et al.
              Characterisation of microstructural evolution during thermomechanical processing of
              15Cr-15Ni-2.2Mo-Ti modified austenitic stainless steel (alloy D9) using ultrasonic
              measurements
              MATERIALS SCIENCE AND TECHNOLOGY            Volume: 23    Issue: 11   Pages: 1381-
              1386 NOV 2007
33_3.         Raju S, Ganesh BJ, Banerjee A, Mohandas E
              Characterisation of thermal stability and phase transformation energetics in
              tempered 9Cr-1Mo steel using drop and differential scanning calorimetry
              Materials Science and Engineering A-Structural Materials Properties Microstructure
              And Processing 465 (1-2): 29-37 SEP 15 2007
33_4.         Liu XB, Takamori S, Osawa Y, et al.
              Diffraction correction in the measurement of ultrasonic attenuation
              Materials Science and Engineering A-Structural Materials Properties Microstructure
              And Processing 442 (1-2): 527-531 Sp. Iss. SI DEC 20 2006


34.       Jayakumar T, Palanichamy P, Baldev Raj
          Detection of hard intermetallics in beta-quenched and thermally aged Zircaloy-2 using
          ultrasonic measurements
          JOURNAL OF NUCLEAR MATERIALS 255 (2-3): 243-249 JUN 1998

          Times Cited (without self citation): 2+..                              Times Cited:       11

34_1.        Manupriya, Thind KS, Sharma G, et al.
             Structural and acoustic investigations of calcium borate glasses
             Physica Status Solidi A-Applications and Materials Science 203 (10): 2356-2364 AUG
             2006
34_2.        Sharma G, Singh K, Manupriya, et al.
             Gamma-Irradiation effect on the Acoustical properties of zinc lead borate glasses
             Physica Status Solidi A-Applications and Materials Science 202 (14): 2720-2730 Nov
             2005

35.        Kumar A, Jayakumar T, Raj B
           Ultrasonic spectral analysis for microstructural characterization of austenitic and ferritic
           steels
           Philosophical Magazine A-Physics Of Condensed Matter Structure Defects And Mechanical
           Properties 80 (11): 2469-2487 NOV 2000

           Times Cited (without self citation): 1_..                           Times Cited :    11


35_1.        Zagan R, Petculescu P
             Ultrasonic spectroscopy of welded cryogenic materials
             Journal Of Optoelectronics And Advanced Materials 9 (6): 1803-1807 JUN 2007

      Source: Web of Science & Google Scholar (As on 03-03-2009)                       Page 29 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR


36.     Thair L, Mudali UK, Asokamani R and Baldev Raj
        Influence of microstructural changes on corrosion behaviour of thermally aged Ti-6AI-7nb
        Alloy
        Materials And Corrosion-Werkstoffe Und Korrosion 55 (5): 358-366 MAY 2004

        Times Cited (without self citation): 10                                  Times Cited : 10

36_1.       Influence of beta stabilizers on the corrosion resistance of a biocompatible titanium alloy
            Vasilescu E, Raducanu D, Drob P, et al.
            REVISTA DE CHIMIE Volume: 58 Issue: 12 Pages: 1244-1248 Published: DEC
            2007
36_2.       Electrochemical characteristics of titanium based biomaterials in artificial saliva
            Mareci D, Ungureanu G, Aelenei DM, et al.
            MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION Volume: 58 Issue: 11
            Pages: 848-856 NOV 2007
36_3.       Popa MV, Demetrescu I, Iordachescu D, et al.
            The relation between electrochemical tests and in vitro evaluation of titanium alloy
            biocompatibility
            MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION 58 (9): 667-675 SEP
            2007
36_4.       Aldea E, Ionita D, Demetrescu I
            Corrosion of Ti6Al4V alloy in various simulated artificial salivas
            REVISTA DE CHIMIE 58 (6): 520-525 JUN 2007
36_5.       Padilla N, Bronson A
            lectrochemical characterization of albumin protein on Ti-6Al-4V alloy immersed in a
            simulated plasma solution
            JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A 81A (3): 531-543 JUN 1 2007
36_6.       Popa MV, Drob P, Raducanu D, et al.
            Evaluation of microstructure and corrosion behaviour of a titanium alloy in simulated
            biological fluids
            REVISTA DE CHIMIE 58 (2): 179-182 FEB 2007
36_7.       Lim PY, She PL, Shih HC
            Microstructure effect on microtopography of chemically etched alpha plus beta Ti alloys
            APPLIED SURFACE SCIENCE 253 (2): 449-458 NOV 15 2006
36_8.       Popa MV, Popescu B, Vasilescu E, et al.
            Electrochemical behaviour of a titanium alloy in comparison with base metal
            REVISTA DE CHIMIE 56 (10): 999-1002 OCT 2005
36_9.       Rosca JCM, Santana EDH, Castro JR, et al.
            Characterisation of anodic films formed on titanium and its alloys
            MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION 56 (10): 692-696 OCT
            2005
36_10.      Zhou YL, Niinomi M, Akahori T, et al.
            Corrosion resistance and biocompatibility of Ti-Ta alloys for biomedical applications
            MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES
            MICROSTRUCTURE AND PROCESSING 398 (1-2): 28-36 MAY 25 2005

37.      B.P.C. Rao, C. Babu Rao, T. Jayakumar and Baldev Raj
         Simulation of eddy current signals from multiple defects
         NDT & E INTERNATIONAL 29 (5): 269-273 OCT 1996

         Times Cited (without self citation): 8                          Times Cited : 10

37_1.        Design and optimization of eddy current sensor for instrumented pipeline inspection
             gauge
             Keshwani R, Bhattacharya S
             SENSOR REVIEW       Vol.28 (4) :321-325, 2008

37_2.        Yusa N, Perrin S, Miya K

      Source: Web of Science & Google Scholar (As on 03-03-2009)                       Page 30 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

             Eddy current data for characterizing less volumetric stress corrosion cracking in
             nonmagnetic materials
             MATERIALS LETTERS 61 (3): 827-829 FEB 2007

37_3.        Yusa N, Chen ZM, Miya K
             Sizing of stress corrosion cracking on austenitic stainless piping in a nuclear power plant
             from eddy current NDT signals
             NONDESTRUCTIVE TESTING AND EVALUATION 20 (2): 103-114 JUN 2005

37_4.        Rebican M, Chen ZM, Yusa N, et al.
             Shape reconstruction of multiple cracks from ECT signals by means of a stochastic
             method
             IEEE TRANSACTIONS ON MAGNETICS 42 (4): 1079-1082 APR 2006

37_5.        Yusa N, Rebican M, Chen ZM, et al.
             Three-dimensional inversion of volumetric defects profiles from electromagnetic
             nondestructive testing signals by means of stochastic methods with the aid of parallel
             computation
             INVERSE PROBLEMS IN SCIENCE AND ENGINEERING 13 (1): 47-63 FEB 2005

37_6.        Yusa N, Chen ZM, Miya K
             Rapid reconstruction of natural stress corrosion cracking from eddy current NDT data
             KEY ENGINEERING MATERIALS 270-273: 593-599 Part 1-3 2004

37_7.        Rebican M, Yusa N, Chen ZM, et al.
             Reconstruction of multiple cracks in an ECT round-robin test
             INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS 19 (1-
             4): 399-404 Sp. Iss. SI 2004

37_8.        Yusa N, Cheng WY, Chen ZM, et al.
             Generalized neural network approach to eddy current inversion for real cracks
             NDT & E INTERNATIONAL 35 (8): 609-614 DEC 2002

38.      V. Moorthy, T. Jayakumar and Baldev Raj
         Evaluation of microstructures in 2.25Cr-1Mo and 9Cr-1Mo steel weldments using magnetic
         Barkhausen noise
         Materials Science And Engineering A-Structural Materials Properties Microstructure and
         Processing 231 (1-2): 98-104 JUL 15 1997

         Times Cited (without self citation): 7                         Times Cited :    10

38_1.         Davut K, Gur CH
              Monitoring the microstructural changes during tempering of quenched SAE 5140 steel
              by magnetic barkhausen noise
              JOURNAL OF NONDESTRUCTIVE EVALUATION 26 (2-4): 107-113 DEC 2007

38_2.         Gaffard V, Gourgues-Lorenzon AF, Besson J
              High temperature creep flow and damage properties of the weakest area of 9Cr1Mo-NbV
              martensitic steel weldments
              ISIJ INTERNATIONAL 45 (12): 1915-1924 2005

38_3.         Lee WH, Shiue RK, Chen C
              Mechanical properties of modified 9Cr-1Mo steel welds with notches
              Materials Science And Engineering A-Structural Materials Properties Microstructure And
              Processing 356 (1-2): 153-161 SEP 15 2003

38_4.         You YY, Shiue RK, Shiue RH, et al.
              The study of carbon migration in dissimilar welding of the modified 9Cr-1Mo steel
              JOURNAL OF MATERIALS SCIENCE LETTERS 20 (15): 1429-1432 AUG 2001

38_5.         Regener D, Schick E, Heyse H
              Crack resistance behaviour of welded joints of heat resisting steels.
              MATERIALPRUFUNG 42 (1-2): 7-13 2000

38_6.         Jeong HT, Park DG, Hong JH, et al.

      Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 31 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

              The effect of microstructural changes on magnetic Barkhausen noise in Mn-Mo-Ni
              pressure vessel steel
              JOURNAL OF THE KOREAN PHYSICAL SOCIETY 34 (5): 429-433 MAY 1999

38_7.         Kim JH, Park DG, Ok CI, et al.
              Effect of microstructures on magnetic Barkhausen noise level in the weld HAZ of an RPV
              steel , JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS 197: 351-353 MAY 1999



39.     De PK, John JT, Banerjee S, Jayakumar T, Thavasimuthu M and Baldev Raj
        Assessment of hydrogen levels in Zircaloy-2 by non-destructive testing
        JOURNAL OF NUCLEAR MATERIALS 252 (1-2): 43-54 JAN 1998

        Times Cited (without self citation): 7+_                                Times Cited :      10

39_1.         Nakatsuka M, Uchida K, Miyazaki A, et al.
              Interpretation of acoustic parameters obtained by EMAR measurement for non-
              destructive hydrogen concentration measurement in Zr alloy
              JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY 44 (6): 902-911 JUN 2007
39_2.         Nakatsuka M, Ishimoto S, Ishii Y, et al.
              A new non-destructive technique for hydrogen level assessment in zirconium alloys
              using EMAR method
              JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY 43 (9): 1142-1148 SEP 2006
39_3.         Gomez MP, Domizzi G, Pumarega MIL, et al.
              Characterization of hydrogen concentration in Zircaloy-4 using ultrasonic techniques
              JOURNAL OF NUCLEAR MATERIALS 353 (3): 167-176 JUL 15 2006
39_4.         Lanzani L, Ruch M
              Comments on the stability of zirconium hydride phases in Zircaloy
              JOURNAL OF NUCLEAR MATERIALS 324 (2-3): 165-176 JAN 15 2004
39_5.         Cheong YM, Kim SS, Kim YS
              Temperature effect of dynamic anisotropic elastic constants of Zr-2.5Nb pressure tube
              by resonant ultrasound spectroscopy
              JOURNAL OF NUCLEAR MATERIALS 303 (2-3): 83-91 JUN 2002
39_6.         Perotti A, Lanzani L, Marengo JA, et al.
              Non-destructive assessment of the thickness of oxide layers on zircaloy-4: influence of
              hydrogen content
              INSIGHT 42 (9): 597-602 SEP 2000
39_7.         Cheong YM, Jung HK, Joo YS, et al.
              Dynamic elastic constants of anisotropic materials by resonant ultrasound
              spectroscopy
              IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL
              47 (3): 559-564 MAY 2000


40.     M.T. Shyamsundar, C. Rajagopalan, Baldev Raj, S.K. Dewangan, B.P.C. Rao and K.K. Ray
        Pattern recognition approaches for the detection and characterization of discontinuities by
        eddy current testing
        MATERIALS EVALUATION 58 (1): 93-101 JAN 2000

        Times Cited (without self citation): 4+                         Times Cited :     10

40_1.         De Mesquita RN, Ting DKS, Cabral ELL, et al.
              Classification of steam generator tube defects for real-time applications using eddy
              current test data and self-organizing maps
              REAL-TIME SYSTEMS 27 (1): 49-70 MAY 2004
40_2.         Song SJ, Kim YH, Kim EL, et al.
              Model-based interpretation of experimental eddy current signals obtained from steam
              generator tubes by bobbin probe
              INSIGHT 45 (5): 337-343 MAY 2003
40_3.         Maria Wrzuszczak and Janusz Wrzuszczak


      Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 32 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

              Eddy current flaw detection with neural network applications,
              Measurement, Volume 38, Issue 2 , September 2005, Pages 132-136.
40_4.         Merja Oja, Samuel Kaski, Teuvo Kohonen
              Bibliography of Self-organising Map (SOM) Papers: 1998-2001 Addendum, Helsinki
              Univ. of Technology, Neural Networks Research Centre, Finland

41.          Banerjee, S;Manas sardar, M;Gayatri, N;Tyagi, AK;Baldev Raj
             Conductivity landscape of highly oriented pyrolytic graphite surfaces containing ribbons
             and edges
             PHYSICAL REVIEW B, 72 (7): Art. No. 075418 AUG 2005

             Times Cited (without self citation): 2+…                   Times Cited :     10

41_1.        Banerjee S, Sardar M, Gayathri N, et al.
             Enhanced conductivity in graphene layers and at their edges (vol 88, pg 06211, 2006)
             APPLIED PHYSICS LETTERS 91 (12): Art. No. 129901 SEP 17 2007

41_2.        Sidorov AN, Yazdanpanah MM, Jalilian R, et al.
             Electrostatic deposition of graphene
             NANOTECHNOLOGY 18 (13): Art. No. 135301 APR 4 2007

42.     Kamruddin, M. Ajikumar, P. K. Dash, S. Tyagi, A. K. Raj, B
        Thermogravimetry-evolved gas analysis-mass spectrometry system for materials research
        BULLETIN OF MATERIALS SCIENCE Vol.26 (4) 449-460, 2003

        Times Cited (without self citation): --                      Times Cited :      10



43.          Gnanaprakash G, Philip J, Jayakumar T, Baldev Raj.
             Effect of digestion time and alkali addition rate on physical properties of magnetite
             nanoparticles
             JOURNAL OF PHYSICAL CHEMISTRY B Volume: 111 Issue: 28 Pages: 7978-7986
             Published: JUL 19 2007

             Times Cited (without self citation): --                  Times Cited :      10


44.       S. Dash, M. Kamruddin, A.K. Tyagi and Baldev Raj
          Nanocrystalline and metastable phase formation in vacuum thermal decomposition of calcium
          carbonate
          THERMOCHIMICA ACTA 363 (1-2): 129-135 NOV 27 2000

          Times Cited (without self citation): 8                              Times Cited :      9

44_1.         Preparation of nano-CaO using thermal-decomposition method
              Tang ZX, Claveau D, Corcuff R, et al.
              MATERIALS LETTERS Volume: 62 (14) pp.2100-2102, MAY 15 2008
44_2.         Preparation of alpha-Fe2O3 submicro-flowers by a hydrothermal approach and their
              electrochemical performance in lithium-ion batteries
              Yanna N, Zhang P, Guo Z, et al.
              ELECTROCHIMICA ACTA Vol.53 (12) PP.4213-4218, MAY 1 2008
44_3.         Sakadjian BB, Iyer MV, Gupta H, et al.
              Kinetics and structural characterization of calcium-based sorbents calcined under
              subatmospheric conditions for the high-temperature CO2 capture process
              INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH 46 (1): 35-42 JAN 3 2007
44_4.         Zhao QH, Mao ZW, Gao CY, et al.
              Assembly of multilayer microcapsules on CaCO3 particles from biocompatible
              polysaccharides
              JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION 17 (9): 997-1014 2006
44_5.         Tamai T, Inazu K, Aika KI


      Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 33 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

              Dichlorodifluoromethane decomposition to CO2 with simultaneous halogen fixation by
              calcium oxide based materials
              ENVIRONMENTAL SCIENCE & TECHNOLOGY 40 (3): 823-829 FEB 1 2006
44_6.         Yeo JG, Choi SC, Kim JW, et al.
              Thermal reaction behavior of ZrSiO4 and CaCO3 mixtures for high-temperature
              refractory applications
              MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES
              MICROSTRUCTURE AND PROCESSING 368 (1-2): 94-102 MAR 15 2004
44_7.         Li WJ, Shi EW, Fukuda T
              Particle size of powders under hydrothermal conditions
              CRYSTAL RESEARCH AND TECHNOLOGY 38 (10): 847-858 2003
44_8.         Chervonnyi AD, Chervonnaya NA, Chukanov NV
              Effect of CaCO3 polymorphs on the strength of a calcium aluminosilicate composite
              INORGANIC MATERIALS 39 (4): 386-391 APR 2003

45.       Sanjay K. Rai, Anish Kumar, Vani Shankar, T. Jayakumar, K. Bhanu Sankara Rao and
          Baldev Raj
          Characterization of microstructures in Inconel 625 using X-ray diffraction peak broadening
          and lattice parameter measurements
          SCRIPTA MATERIALIA 51 (1): 59-63 JUL 2004

          Times Cited (without self citation): 8                           Times Cited :    9

45_1.     Microstructure evolution of alloy 625 foil and sheet during creep at 750 degrees C
          Evans ND, Maziasz PJ, Shingledecker JP, et al.
          MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES
          MICROSTRUCTURE AND PROCESSING Volume: 498 Issue: 1-2 Special Issue: Sp. Iss.
          SI pp.412-420, DEC 20 2008
45_2.     LATTICE MISFIT MEASUREMENT IN INCONEL 625 BY X-RAY DIFFRACTION TECHNIQUE
          Sarkar A, Mukherjee P, Barat P, et al.
          INTERNATIONAL JOURNAL OF MODERN PHYSICS B                Volume: 22(23)   pp. 3977-3985,
          SEP 20 2008
45_3.     Improvement of wear resistance of hot working tool steel by hardfacing - Part 2 - Case
          study
          Kashani H, Amadeh A, Vatanara MR
          MATERIALS SCIENCE AND TECHNOLOGY               Vol.24(3), 356-360, MAR 2008
45_4.     Characterization of precipitation in Al-Mg-Cu alloys by X-ray diffraction peak broadening
          analysis
          Novelo-Peralta O, Gonzalez G, Lara-Rodriguez GA
          MATERIALS CHARACTERIZATION          Vol.59 (6), pp.773-780, JUN 2008
45_5.     Creep behavior of INCOLOY alloy 617
          Cabibbo M, Gariboldi E, Spigarelli S, et al.
          JOURNAL OF MATERIALS SCIENCE          Vol.43(8), 2912-2921, APR 2008
45_6.     Investigation on precipitation phenomena of Ni-22Cr-12Co-9Mo alloy aged and crept at
          high temperature
          Gariboldi E, Cabibbo M, Spigarellib S, et al.
          INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING                Vol.85 (1-2), 63-71,
          JAN-FEB 2008
45_7.     Nogueira NAS, da Silva EB, Jardim PM, et al.
          Synthesis and characterization of NiAl2O4 nanoparticles obtained through gelatin
          MATERIALS LETTERS 61 (25): 4743-4746 OCT 2007
45_8.     Liu F, Yang GC
          Rapid solidification of highly undercooled bulk liquid superalloy: recent developments,
          future directions
          INTERNATIONAL MATERIALS REVIEWS 51 (3): 145-170 JUN 2006


      Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 34 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR


46.     V.S. Srinivasan, M. Valsan, K. Bhanu Sankara Rao, S.L. Mannan and Baldev Raj,
        Low cycle fatigue and creep-fatigue interaction behavior of 316L(N) stainless steel and life
        prediction by artificial neural network approach
        INTERNATIONAL JOURNAL OF FATIGUE 25 (12): 1327-1338 DEC 2003

        Times Cited (without self citation): 7                              Times Cited : 9

46_1.         High cycle fatigue behavior of 316L stainless steel
              Puchi-Cabrera ES, Staia MH, Tovar C, et al.
              INTERNATIONAL JOURNAL OF FATIGUE Vol.30(12), pp.2140-2146, DEC 2008

46_2.         Probabilistic neural network to predict cracks in taphole mud used in blast furnaces
              Vernilli F, Silva SN, Siqueira AF, et al.
              INDUSTRIAL CERAMICS Vol.28(2) Special Issue: Sp. Iss. SI pp.133-137, SEP 2008

46_3.         A neural network model to predict low cycle fatigue life of nitrogen-alloyed 316L
              stainless steel
              Mathew MD, Kim DW, Ryu WS
              Materials Science And Engineering A-Structural Materials Properties Microstructure and
              Processing Volume: 474 Issue: 1-2 Pages: 247-253, 2008
46_4.         Gupta VK, Kwatra N, Ray S
              Artificial neural network modeling of creep behavior in a rotating composite disc
              ENGINEERING COMPUTATIONS 24 (1-2): 151-164 2007
46_5.         Mannan SL, Valsan M
              High-temperature low cycle fatigue, creep-fatigue and thermomechanical fatigue of
              steels and their welds
              INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES 48 (2): 160-175 FEB 2006
46_6.         Rao KBS
              Complexities in fatigue of engineering materials at elevated temperatures
              Transactions Of The Indian Institute Of Metals 57 (6): 537-577 DEC 2004
46_7.         Mannan SL, Valsan M
              High temperature low cycle fatigue of steels and their welds
              KEY ENGINEERING MATERIALS 274-276: 57-64 2004


47.     S. Dash, Alok Singh, P.K. Ajitkumar, H. Subramanian, M. Rajalakshmi, A.K. Tyagi, A.K.
        Arora, S.V. Narasimhan and Baldev Raj
        Synthesis and characterization of nanocrystalline thoria obtained from thermally decomposed
        thorium carbonate
        JOURNAL OF NUCLEAR MATERIALS 303 (2-3): 156-168 JUN 2002

        Times Cited (without self citation): 7                                 Times Cited: 9

47_1.        Arora AK, Rajalakshmi M, Ravindran TR, Sivasubramanian, V.
             Raman spectroscopy of optical phonon confinement in nanostructured materials
             JOURNAL OF RAMAN SPECTROSCOPY 38 (6): 604-617 JUN 2007
47_2.        Tan XL, Wang XK, Fang M, et al.
             Sorption and desorption of Th(IV) on nanoparticles of anatase studied by batch and
             spectroscopy methods
             Colloids And Surfaces A-Physicochemical And Engineering Aspects 296 (1-3): 109-116
             MAR 15 2007
47_3.        Castro MA, Aller AJ, McCabe A, et al.
             Spectrometric study of condensed phase species of thorium- and palladium-based
             modifiers in a complex matrix for electrothermal atomic absorption spectrometry
             Journal Of Analytical Atomic Spectrometry 22 (3): 310-317 2007
47_4.        Reibold RA, Poco JF, Baumann TF, et al.
             Synthesis and characterization of a nanocrystalline thoria aerogel
             JOURNAL OF NON-CRYSTALLINE SOLIDS 341 (1-3): 35-39 AUG 1 2004
47_5.        Niranjan RS, Patil KR, Sainkar SR, et al.
             Morphological and sensing properties of spray-pyrolysed Th : SnO2 thin films
             MATERIALS CHEMISTRY AND PHYSICS 84 (1): 37-45 MAR 15 2004
47_6.        Rajalakshmi M, Arora AK, Dash S, et al.

      Source: Web of Science & Google Scholar (As on 03-03-2009)                      Page 35 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

             Raman scattering investigations of nanocrystalline thorium oxide
             JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY 3 (5): 420-422 OCT 2003
47_7.        Niranjan RS, Londhe MS, Mandale AB, et al.
             Trimethylamine sensing properties of thorium-incorporated tin oxide
             SENSORS AND ACTUATORS B-CHEMICAL 87 (3): 406-413 DEC 20 2002

48.     Moorthy V, Jayakumar T, Baldev Raj
        Influence of microstructure on acoustic emission behavior during stage 2 fatigue crack
        growth in solution annealed, thermally aged and weld specimens of AISI type 316 stainless
        steel
        Materials Science and Engineering A-Structural Materials Properties Microstructure And
        Processing 212 (2): 273-280 JUL 30 1996

        Times Cited (without self citation): 6                             Times Cited:     9

48_1.      Wang K, Du XD, Youn KT, et al.
           Effect of Impact Energy on the Impact-Wear Properties of Low Carbon High Manganese
           Alloy Steels in Corrosive Conditions
           METALS AND MATERIALS INTERNATIONAL Volume: 14 (6) PP.689-693 DEC 2008
48_2.      Tsay LW, Chen JJ, Huang JC
           Hydrogen-assisted fatigue crack growth of AISI 316L stainless steel weld
           CORROSION SCIENCE Volume: 50 (11) pp.2973-2980 NOV 2008
48_3.      Han KS, Oh KH., Acoustic emission as a tool of fatigue assessment
           KEY ENGINEERING MATERIALS 306-308: 271-277 Part 1-2 2006
48_4.      Oh KH, Han KS.,
           Interrelationship between stress intensity factor and acoustic emission parameter in the
           opening mode fatigue crack propagation, Solid State Phenomena 110: 71-77 2006
48_5.      Tsay LW, Liu YC, Young MC, et al., Fatigue crack growth of AISI 304 stainless steel welds
           in air and hydrogen
           MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES
           MICROSTRUCTURE AND PROCESSING 374 (1-2): 204-210 JUN 15 2004
48_6       Oh KH, Jung CK, Yang YC, et al., Acoustic emission behavior during fatigue crack
           propagation in 304 stainless steel
           KEY ENGINEERING MATERIALS 261-263: 1325-1330 Part 1&2 2004

49.     V. Moorthy, S. Vaidyanathan, Baldev Raj, T. Jayakumar and B.P. Kashyap
        Insight into the microstructural characterization of ferritic steels using micromagnetic
        parameters
        Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science 31 (4):
        1053-1065 APR 2000

        Times Cited (without self citation): 6                                    Times Cited :   9

49_1.        Moorthy V, Shaw BA
             Magnetic Barkhausen emission measurements for evaluation of material properties in
             gears
             NONDESTRUCTIVE TESTING AND EVALUATION Vol.23 (4) Pages: 317-347 2008
49_2.        Kaplan M, Gur CH, Erdogan M
             Characterization of dual-phase steels using magnetic barkhausen noise technique
             JOURNAL OF NONDESTRUCTIVE EVALUATION 26 (2-4): 79-87 DEC 2007
49_3.        Gur CH, Cam I
             Comparison of magnetic Barkhausen noise and ultrasonic velocity measurements for
             microstructure evaluation of SAE 1040 and SAE 4140 steels
             MATERIALS CHARACTERIZATION 58 (5): 447-454 MAY 2007
49_4.        D'Amato C, Verdu C, Kleber X, et al.
             Characterization of austempered ductile iron through Barkhausen noise measurements
             JOURNAL OF NONDESTRUCTIVE EVALUATION 22 (4): 127-139 DEC 2003
49_5.        Lee WH, Shiue RK, Chen C
             Mechanical properties of modified 9Cr-1Mo steel welds with notches

      Source: Web of Science & Google Scholar (As on 03-03-2009)                      Page 36 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

             Materials Science And Engineering A - Structural Materials Properties Microstructure And
             Processing 356 (1-2): 153-161 SEP 15 2003
49_6.        Augutis V, Nakutis Z
             Barkhausen noise measurement and its applications
             INSIGHT 43 (6): 381-384 JUN 2001


50.      Jha BB, Baldev Raj, Khanna AS
         Frequency-Analysis of AE Signal obtained during breakaway Oxidation and Internal
         Cracking of 2-1/4cr-1mo Steel At 900oC
         OXIDATION OF METALS 26 (3-4): 263-273 OCT 1986

         Times Cited (without self citation): 5                                  Times Cited:      9

50_1.          ZHANG YF, SHORES DA
               Cracking and Spalling of Oxide Scale from 304 Stainless-Steel at High-
               Temperatures
               JOURNAL OF THE ELECTROCHEMICAL SOCIETY 141 (5): 1255-1260 MAY 1994

50_2.          ZHANG YF, SHORES DA
               Study Of Cracking And Spalling Of Cr2o3 Scale Formed On Ni-30 Cr Alloy
               OXIDATION OF METALS 40 (5-6): 529-553 DEC 1993

50_3.          LI MS, LI TF
               New method for studying influence of alloying elements on stress in oxide scales
               MATERIALS SCIENCE AND TECHNOLOGY 9 (1): 67-69 JAN 1993

50_4.          TIEFAN L, MEISHUAN L, HENRONG G
               Critical Cracking Stress of Oxide Scales Of Tantalum Due to Oxidation
               Materials Science and Engineering A-Structural Materials Properties Microstructure
               And Processing 120: 235-238 Part 1 NOV 15 1989

50_5.          KHANNA AS, JONAS H, QUADAKKERS WJ
               Use Of Acoustic-Emission Technique To Study The Spalling Behavior Of Oxide Scales
               On Ni-10Cr-8Al Containing Sulfur and or Yttrium Impurity
               Werkstoffe Und Korrosion-Materials And Corrosion 40 (9): 552-558 SEP 1989

51.    B.P.C. Rao, Baldev Raj, T. Jayakumar and P. Kalyanasundaram
       An artificial neural network for eddy current testing of austenitic stainless steel welds
       NDT & E INTERNATIONAL 35 (6): 393-398 SEP 2002

       Times Cited (without self citation): 4                                    Times Cited:      9

51_1.        Amineh RK, Ravan M, Sadeghi SHH, et al.
             Using AC field measurement data at an arbitrary liftoff distance to size long surface-
             breaking cracks in ferrous metals
             NDT & E INTERNATIONAL Volume: 41 (3) pp.169-177 APR 2008

51_2.        Smid R, Docekal A, Kreidl M
             Automated classification of eddy current signatures during manual inspection
             NDT & E INTERNATIONAL 38 (6): 462-470 SEP 2005
51_3.        Tian GY, Sophian A
             Reduction of lift-off effects for pulsed eddy current NDT
             NDT & E INTERNATIONAL 38 (4): 319-324 JUN 2005
51_4.        Song SJ, Kim YH, Kim EL, et al.
             Model-based interpretation of experimental eddy current signals obtained from steam
             generator tubes by bobbin probe
             INSIGHT 45 (5): 337-343 MAY 2003




      Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 37 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

52.        Philip J, Shima PD, Raj B
            Enhancement of thermal conductivity in magnetite based nanofluid due to chainlike
           structures
           APPLIED PHYSICS LETTERS Vol.91 (20) Article Number: 203108 NOV 12 2007

           Times Cited (without self citation): 3                             Times Cited :     9

52_1       Wu SY, Zhu DS, Li XF, et al.
           Thermal energy storage behavior of Al2O3-H2O nanofluids
           THERMOCHIMICA ACTA Volume: 483 (1-2) pp.73-77, FEB 10 2009

52_2.      Effect of Surfactant Monolayer on Reduction of Fe3O4 Nanoparticles under Vacuum
           Ayyappan S, Gnanaprakash G, Panneerselvam G, M.P. Antony and John Philip
           JOURNAL OF PHYSICAL CHEMISTRY C Vol.112 (47) pp.18376-18383 NOV 27 2008
52_3.      Jordanovic J, Klapp SHL
           Field-induced layer formation in dipolar nanofilms
           PHYSICAL REVIEW LETTERS Volume: 101 Issue: 3 Article Number: 038302                 Published:
           JUL 18 2008


53.       Banerjee S, Sardar M, Gayathri N, Tyagi AK, Raj B
          Enhanced conductivity in graphene layers and at their edges
          APPLIED PHYSICS LETTERS 88 (6): Art. No. 602111 FEB 6 2006

          Times Cited (without self citation): 8                               Times Cited :     8

53_1.         Banerjee S, Bhattacharyya D
              Electronic properties of nano-graphene sheets calculated using quantum chemical DFT
              COMPUTATIONAL MATERIALS SCIENCE            Vol.44 (1)   pp.41-45, NOV 2008
53_2.         You YM, Ni ZH, Yu T, et al.
              Edge chirality determination of graphene by Raman spectroscopy
              APPLIED PHYSICS LETTERS         Vol.93 (16) Article #:163112   OCT 20 2008
53_3.         Yampol'skii VA, Savel'ev S, Nori F
              Voltage-driven quantum oscillations in graphene
              NEW JOURNAL OF PHYSICS          Vol.10, Article #: 053024,   MAY 19 2008
53_4.         Lemme MC, Echtermeyer TJ, Baus M, et al.
              Mobility in graphene double gate field effect transistors
              SOLID-STATE ELECTRONICS          Vol.52 (4) pp.514-518, APR 2008
53_5.         Echtermeyer TJ, Lemme MC, Bolten J, et al.
              Graphene field-effect devices
              EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS             Vol.148 (19-26)   SEP 2007
53_6.         Banerjee S, Sardar M, Gayathri N, et al.
              Enhanced conductivity in graphene layers and at their edges
              APPLIED PHYSICS LETTERS         Vol.91(12) Article #: 129901, SEP 17 2007
53_7.         Stojkovic D, Lammert PE, Crespi VH
              Electronic bisection of a single-wall carbon nanotube by controlled chemisorption
              Physical Review Letters 99 (2): Art. No. 026802 JUL 13 2007
53_8.         Lemme MC, Echtermeyer TJ, Baus M, et al.
              A graphene field-effect device
              IEEE Electron Device Letters 28 (4): 282-284 APR 2007

54.     S.L. Mannan, S.C. Chetal, Baldev Raj and S.B. Bhoje
        Selection of materials for Prototype Fast Breeder Reactor
        Transactions Of The Indian Institute Of Metals 56 (2): 155-178 APR 2003

        Times Cited (without self citation): 7                                Times Cited :     8

      Source: Web of Science & Google Scholar (As on 03-03-2009)                      Page 38 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR


54_1.       Inter-relation between true stress at the onset of necking and true uniform strain in
            steels - A manifestation of onset to plastic instability
            Samuel EI, Choudhary BK, Rao KBS
            MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES
            MICROSTRUCTURE AND PROCESSING Volume: 480 (1-2) pp.506-509 MAY 15 2008

54_2.       Samuel EI, Choudhary BK, Rao KBS
            Influence of post-weld heat treatment on tensile properties of modified 9Cr-1Mo ferritic
            steel base metal
            MATERIALS SCIENCE AND TECHNOLOGY 23 (8): 992-999 AUG 2007

54_3.       Mathew MD, Latha S, Rao KBS
            An assessment of creep strength reduction factors for 316L(N) SS welds
            Materials Science And Engineering A-Structural Materials Properties Microstructure And
            Processing 456 (1-2): 28-34 MAY 15 2007

54_4.       Mathew, M. D. Latha, S. Ramkumar, R. Rao, K. B. S. Mannan, S. L.
            Modelling the thermal creep behaviour of alloy D9 stainless steel clad tubes using Theta
            projection method
            Transactions of The Indian Institute Of Metals 59 (4): 469-479 AUG 2006

54_5.       Shastry CG, Mathew MD, Rao KBS, et al.
            Creep deformation and fracture behavior of type 316L(N) stainless steel
            Transactions Of The Indian Institute Of Metals 58 (2-3): 275-279 APR-JUN 2005

54_6.       Raju S, Sivasubramanian K, Divakar R, Panneerselvam, G, Banerjee A, Mohandas E
            and Antony M P.,
            Thermal expansion studies on Inconel-600((R)) by high temperature X-ray diffraction
            Journal Of Nuclear Materials 325 (1): 18-25 FEB 1 2004

54_7.       Shastry CG, Mathew MD, Rao KBS, et al.
            Creep properties of indigenously developed nitrogen-alloyed type 316L stainless steel at
            923 K
            Transactions Of The Indian Institute Of Metals 56 (5): 521-525 OCT 2003

55.     Rajendran V, Kumaran SM, Sivasubramanian V, Jayakumar T and Baldev Raj
        Anomalies in elastic moduli and ultrasonic attenuation near ferromagnetic transition
        temperature in La0.67Sr0.33MnO3 perovskite
        PHYSICA STATUS SOLIDI A-APPLIED RESEARCH 195 (2): 350-358 JAN 2003

        Times Cited (without self citation): 6                                Times Cited : 8

55_1.         Huang QJ, Cheng Y, Liu XJ, et al.
              Study of the elastic constants in a La0.6Sr0.4MnO3 film by means of laser-generated
              ultrasonic wave method
              ULTRASONICS 44: E1223-E1227 Suppl. 1 DEC 22 2006
55_2.         Ren YH, Trigo M, Merlin R, et al.
              Generation and detection of coherent longitudinal acoustic phonons in the
              La0.67Sr0.33MnO3 thin films by femtosecond light pulses
              APPLIED PHYSICS LETTERS 90 (25): Art. No. 251918 JUN 18 2007
55_3.         Chen CX, Jiang GS, Jiang JL, et al.
              Elastic-effects study of charge-ordering transition in La0.25Ca0.75MnO3 perovskite
              JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS 308 (1): 71-73 JAN 2007
55_4.         Belevtsev BI, Zvyagina GA, Zhekov KR, et al.
              Influence of magnetic field on the paramagnetic-ferromagnetic transition in a La1-
              xCaxMnO3 (x approximate to 0.25) crystal: Ultrasonic and transport studies
              PHYSICAL REVIEW B 74 (5): Art. No. 054427 AUG 2006
55_5.         Farag N, Bobeth M, Pompe W, et al.
              Modeling of twinning in epitaxial (001)-oriented La0.67Sr0.33MnO3 thin films
              JOURNAL OF APPLIED PHYSICS 97 (11): Art. No. 113516 JUN 1 2005


      Source: Web of Science & Google Scholar (As on 03-03-2009)                      Page 39 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

55_6.         Chen CX, Zheng RK, Qian T, et al.
              Charge ordering correlated elastic anomalies in La1-xCaxMnO3 perovskite
              JOURNAL OF PHYSICS D-APPLIED PHYSICS 38 (6): 807-810 MAR 21 2005


56.          Gnanaprakash G, Ayyappan S, Jayakumar T, Philip J, Baldev Raj
             Magnetic nanoparticles with enhanced gamma-Fe2O3 to alpha-Fe2O3 phase transition
             temperature
             Nanotechnology, 17 (23): 5851-5857 DEC 14 2006

             Times Cited (without self citation): 6                            Times Cited: 8

56_1.        Cangussu D, Nunes WC, Correa HLD, et al.
             Gamma-Fe2O3 nanoparticles dispersed in porous Vycor glass: A magnetically diluted
             integrated system
             JOURNAL OF APPLIED PHYSICS Vol.105 (1) Article # 013901 JAN 1 2009

56_2.        Ayyappan S, Gnanaprakash G, Panneerselvam G, et al.
             Effect of Surfactant Monolayer on Reduction of Fe3O4 Nanoparticles under Vacuum
             JOURNAL OF PHYSICAL CHEMISTRY C Vol.112 (47) pp.18376-18383, NOV 27 2008

56_3.        Rey JFQ, Ferreira FF, Muccillo ENS
             Primary particle size effect on phase transition in Ba2In2O5
             SOLID STATE IONICS Vol.179 (21-26) pp.1029-1031, SEP 15 2008

56_4.        Verges MA, Costo R, Roca AG, et al.
             Uniform and water stable magnetite nanoparticles with diameters around the
             monodomain-multidomain limit
             JOURNAL OF PHYSICS D-APPLIED PHYSICS Vol.41(13) Article #134003, JUL 7 2008

56_5.        Low temperature and size controlled synthesis of monodispersed gamma-Fe2O3
             nanoparticles by an epoxide assisted sol-gel route
             Cui HT, Ren WZ
             JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY Vol.47 (1) PP.81-84, JUL 2008

56_6.        Zhu H, Yang D, Zhu L, et al.
             A facile two-step hydrothermal route for the synthesis of gamma-Fe2O3 nanocrystals
             and their magnetic properties
             JOURNAL OF MATERIALS SCIENCE 42 (22): 9205-9209 NOV 2007



57.      T.M.Sridhar, N. Eliaz, U. Kamachi Mudali and Baldev Raj
         Electrophoretic deposition of hydroxyapatite coatings and corrosion aspects of metallic
         implants
         CORROSION REVIEWS 20 (4-5): 255-293 2002

         Times Cited (without self citation): 6                            Times Cited:   8

57_1.         Eliaz N
              Electrocrystallization of Calcium Phosphates
              ISRAEL JOURNAL OF CHEMISTRY Vol.48 (3-4) pp.159-168, 2008

57_2.         Pang X, Zhitomirsky I
              Electrodeposition of hydroxyapatite-silver-chitosan nanocomposite coatings
              SURFACE & COATINGS TECHNOLOGY Vol.202 (16) pp.3815-3821 MAY 15 2008

57_3.         Witte F, Fischer J, Nellesen J, et al.
              In vitro and in vivo corrosion measurements of magnesium alloys
              BIOMATERIALS 27 (7): 1013-1018 OCT 2006
57_4.         Zhang EL, Yang K
              Coating of calcium phosphate on biometallic materials by electrophoretic deposition
              Transactions of Nonferrous Metals Society Of China 15 (5): 957-964 OCT 2005


      Source: Web of Science & Google Scholar (As on 03-03-2009)                     Page 40 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

57_5.         Giacomelli FC, Giacomelli C, De Oliveira AG, et al.
              Effect of electrolytic ZrO2 coatings on the breakdown potential of NiTi wires used as
              endovascular implants
              Materials Letters 59 (7): 754-758 MAR 2005
57_6.         Sridhar TM, Mudali UK
              Development of bioactive hydroxyapatite coatings on type 316L stainless steel by
              electrophoretic deposition for orthopaedic applications
              Transactions of the Indian Institute Of Metals 56 (3): 221-230 JUN 2003

58.     John Philip, C. Babu Rao, T. Jayakumar and Baldev Raj
        A new optical technique for detection of defects in ferromagnetic materials and components
        NDT & E INTERNATIONAL 33 (5): 289-295 JUL 2000

        Times Cited (without self citation): 3                                  Times Cited:       8

58_1.       Amineh RK, Nikolova NK, Reilly JP, et al.
            Characterization of surface-breaking cracks using one tangential component of magnetic
            leakage field measurements
            IEEE TRANSACTIONS ON MAGNETICS           Vol.44 (4)    pp.516-524    APR 2008
58_2.       Schifini R, Bruno AC
            Experimental verification of a finite element model used in a magnetic flux leakage
            inverse problem
            JOURNAL OF PHYSICS D-APPLIED PHYSICS 38 (12): 1875-1880 JUN 21 2005
58_3.       Mandache C, Clapham L
            A model for magnetic flux leakage signal predictions
            JOURNAL OF PHYSICS D-APPLIED PHYSICS 36 (20): 2427-2431 OCT 21 2003

59.     Kalyanasundaram P, Rajagopalan C, Baldev Raj, Prabhakar O, Sharma D G R
        High-Sensitivity Detection and Classification of Defects in Austenitic Weldments using
        Cluster-Analysis and Pattern-Recognition
        British Journal Of Non-Destructive Testing 33 (6): 290-297 Jun 1991

        Times Cited (without self citation): 1                        Times Cited :    8

59_1.       Ditchburn RJ, Burke SK, Scala CM
            NDT of welds: State of the art
            NDT & E International 29 (2): 111-117 APR 1996

60.     T. Jayakumar, C.K. Mukhopadhyay, K.V. Kasiviswanathan and Baldev Raj
        Acoustic and magnetic methods for haracterization of microstructures and tensile
        deformation in AISI type 304 stainless steel
        TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS 51 (6): 485-509 DEC 1998

        Times Cited (without self citation): 1                              Times Cited :      8

60_1.        Sagar SP, Kumar BR, Dobmann G, et al.
             Magnetic characterization of cold rolled and aged AISI 304 stainless steel
             NDT & E INTERNATIONAL 38 (8): 674-681 DEC 2005

61.     Girija S, Mudali UK, Raju VR, Dayal R K, Khatak H S and Baldev Raj
        Determination of corrosion types for AISI type 304L Stainless Steel using electrochemical
        noise method
        Materials Science And Engineering A-Structural Materials Properties Microstructure and
        Processing, 407 (1-2) 188-195 2005

        Times Cited (without self citation): 7                             Times Cited :       7

61_1.         Ashassi-Sorkhabi H, Seifzadeh D, Hosseini MG
              EN, EIS and polarization studies to evaluate the inhibition effect of 3H-phenothiazin-3-
              one, 7-dimethylamin on mild steel corrosion in 1 M HCl solution
              CORROSION SCIENCE, Vol.50 (12) pp.3363-3370, 2008



      Source: Web of Science & Google Scholar (As on 03-03-2009)                       Page 41 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

61_2.         Bastos IN, Nogueira RP
              Electrochemical noise characterization of heat-treated superduplex stainless steel
              MATERIALS CHEMISTRY AND PHYSICS Volume: 112 Issue: 2 pp.645-650 2008

61_3.         Ashassi-Sorkhabi H, Seifzadeh D
              Analysis of raw and trend removed EN data in time domain to evaluate corrosion
              inhibition effects of New Fuchsin dye on steel corrosion and comparison of results with
              EIS
              JOURNAL OF APPLIED ELECTROCHEMISTRY Volume: 38 (11), pp.1545-1552, 2008

61_4.         Amira S, Lafront AM, Dube D, et al.
              Electrochemical study of AXJ530 magnesium alloy behavior in alkaline NaCl solution
              ADVANCED ENGINEERING MATERIALS Volume: 9 Issue: 11, pp.973-980, 2007

61_5.         Qiao GF, Ou JP
              Corrosion monitoring of reinforcing steel in cement mortar by EIS and ENA
              ELECTROCHIMICA ACTA 52 (28): 8008-8019, 2007

61_6.         Lafront AM, Ghali E, Morales AT
              Corrosion behavior of two bipolar plate materials in simulated PEMFC environment by
              electrochemical noise technique
              ELECTROCHIMICA ACTA 52 (15): 5076-5085 APR 20 2007
61_7.         Zhao B, Li JH, Hu RG, et al.
              Study on the corrosion behavior of reinforcing steel in cement mortar by
              electrochemical noise measurements
              ELECTROCHIMICA ACTA 52 (12): 3976-3984 MAR 10 2007

62.        Baldev Raj, Jha BB
           Fundamentals of Acoustic-Emission
           British Journal of Non-Destructive Testing 36 (1): 16-23 JAN 1994

           Times Cited (without self citation): 7                          Times Cited :    7


62_1.        Kong LX, Nahavandi S
             On-line tool condition monitoring and control system in forging processes
             Journal Of Materials Processing Technology 125: 464-470 Sp. Iss. SI SEP 9 2002

62_2.        Johnson M, Gudmundson P
             Experimental and theoretical characterization of acoustic emission transients in
             composite laminates
             COMPOSITES SCIENCE AND TECHNOLOGY 61 (10): 1367-1378 2001

62_3.        Mokbel AA, Maksoud TMA
             Monitoring of the condition of diamond grinding wheels using acoustic emission
             technique
             Journal Of Materials Processing Technology 101 (1-3): 292-297 APR 14 2000

62_4.        Pacheco T, NayebHashemi H, Sallam HEM
             A comparison of two Nextel 440 fibre reinforced aluminium composites using acoustic
             emission
             JOURNAL OF MATERIALS SCIENCE 32 (12): 3135-3142 JUN 15 1997

62_5.        Kathrina T, Rawlings RD
             Acoustic studies of the effect of SiC particle reinforcement on the compaction of alumina
             powder
             JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 17 (9): 1157-1166 1997

62_6.        Mullins WM, Irwin RD, Malas JC, et al.
             Examination on the use of acoustic emission for monitoring metal forging process: A
             study using simulation technique
             SCRIPTA MATERIALIA 36 (9): 967-974 MAY 1 1997

62_7.        Mullins WM, Irwin RD, Venugopal S, et al.
             The simulation of acoustic emission for metal forging


      Source: Web of Science & Google Scholar (As on 03-03-2009)                      Page 42 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

             Jom-Journal of the Minerals Metals & Materials Society 48 (9): 35-37 SEP 1996

62.     Vasudevan M, Murugananth M, Bhaduri AK, Baldev Raj and Rao KP
        Bayesian neural network analysis of ferrite number in stainless steel welds
        SCIENCE AND TECHNOLOGY OF WELDING AND JOINING 9 (2): 109-120 APR 2004

        Times Cited (without self citation): 5                           Times Cited:   7

62_1.       Vasudevan M
            Soft Computing Techniques in Stainless Steel Welding
            MATERIALS AND MANUFACTURING PROCESSES Vol.24 (2) pp.209-218, 2009
62_2.       Ghanty P, Paul S, Roy A, et al.
            Fuzzy rule based approach for predicting weld bead geometry in gas tungsten arc
            welding
            SCIENCE AND TECHNOLOGY OF WELDING AND JOINING                Volume: 13 (2) pp.167-175
            MAR 2008
62_3.       Ghanty P, Paul S, Mukherjee P, et al.
            Modelling weld bead geometry using neural networks for GTAW of austenitic stainless
            steel
            SCIENCE AND TECHNOLOGY OF WELDING AND JOINING Vol.12 (7) pp.649-658 2007
62_4.       de Miranda HC, Scotti A, Ferraresi VA
            Identification and control of metal transfer in pulsed GMAW using optical sensor
            Science And Technology Of Welding And Joining 12 (3): 249-257 MAY 2007
62_5.       Dong ZB, Wei YH, Yakushin B, et al.
            Simulating weld hot crack of T-type joints of aluminum plates with ANN
            Transactions Of Nonferrous Metals Society Of China 15: 25-29 Sp. Iss. 2 APR 2005


63.      S. Dash, R. Krishnan, M. Kamruddin, A.K. Tyagi and Baldev Raj
         Temperature programmed decomposition of thorium oxalate hexahydrate
         JOURNAL OF NUCLEAR MATERIALS 295 (2-3): 281-289 JUN 2001

         Times Cited (without self citation): 5                    Times Cited :   7

63_1.        Tortet L, Monnereau O, Conflant P, et al.
             Synthesis and characterization of new hydrated bismuth (III) oxalates
             ANNALES DE CHIMIE-SCIENCE DES MATERIAUX 32 (1): 69-80 JAN-FEB 2007

63_2.        Materazzi S, Gentili A, Curini R
             Applications of evolved gas analysis - Part 2: EGA by mass spectrometry
             TALANTA 69 (4): 781-794 JUN 15 2006

63_3.        Hermanek M, Zboril R, Mashlan M, et al.
             Thermal behaviour of iron(II) oxalate dihydrate in the atmosphere of its conversion gases,
             Journal Of Materials Chemistry 16 (13): 1273-1280 2006

63_4.        Ananthasivan K, Anthonysamy S, Singh A, et al.
             De-agglomeration of thorium oxalate - a method for the synthesis of sinteractive thoria
             JOURNAL OF NUCLEAR MATERIALS 306 (1): 1-9 NOV 2002

63_5.        Drouet C, Alphonse P
             Synthesis of mixed manganites with high surface area by thermal decomposition of
             oxalates
             JOURNAL OF MATERIALS CHEMISTRY 12 (10): 3058-3063 2002

64.      S. Dash, M. Kamruddin, P.K. Ajikumar, A.K. Tyagi, S. Bera, S.V. Narasimhan and Baldev
         Raj
         Temperature programmed decomposition of thorium nitrate pentahydrate
         JOURNAL OF NUCLEAR MATERIALS 278 (2-3): 173-185 APR 2000

         Times Cited (without self citation): 3                    (-)         Times Cited :    7

      Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 43 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR


64_1.        Wayne DM, Hang W, McDaniel DK, et al.
             The thermal ionization cavity (TIC) source: elucidation of possible mechanisms for
             enhanced ionization efficiency
             INTERNATIONAL JOURNAL OF MASS SPECTROMETRY 216 (1): 41-57 APR 15 2002
64_2.        Materazzi S, Curini R
             The coupling of mass spectrometry with thermoanalytical instruments: Applications of
             evolved gas analysis
             APPLIED SPECTROSCOPY REVIEWS 36 (2-3): 169-180 2001
64_3.        Dinh LN, Cecala CM, Leckey JH, et al.
             The effects of moisture on LiD single crystals studied by temperature-programmed
             decomposition
             JOURNAL OF NUCLEAR MATERIALS 295 (2-3): 193-204 JUN 2001

65.       C.K. Mukhopadhyay, K.K. Ray, T. Jayakumar and Baldev Raj
          Acoustic emission from tensile deformation of unnotched and notched specimens of AISI
          type 304 stainless steels
          Materials Science and Engineering A-Structural Materials Properties Microstructure And
          Processing 255 (1-2): 98-106 OCT 31 1998

          Times Cited (without self citation): 2                               Times Cited:   7

65_1.       Shaikh H, Amirthalingam R, Anita T, et al.
            Evaluation of stress corrosion cracking phenomenon in an AISI type 316LN stainless
            steel using acoustic emission technique
            CORROSION SCIENCE 49 (2): 740-765 FEB 2007

65_2        Papargyris AD, Papargyri SA.,
            Acoustic emission characterization of kaolin-based clay ceramics
            APPLIED CLAY SCIENCE 18 (3-4): 191-204 MAR 2001

66.     P. Kalyanasundaram, T. Jayakumar, Baldev Raj, C.R.L. Murthy and A. Krishnan
        Acoustic-Emission Technique for Leak Detection in an end Shield of a Pressurised Heavy-
        Water Reactor
        NUCLEAR ENGINEERING AND DESIGN 116 (2): 181-185 SEP 1989

        Times Cited (without self citation): 1                              Times Cited :     7

66_1.       Caetano AM, Farkas W
            Local growth envelopes of Besov spaces of generalized smoothness
            ZEITSCHRIFT FUR ANALYSIS UND IHRE ANWENDUNGEN 25 (3): 265-298 2006


67.    L.Thair, U. Kamachi Mudali, S. Rajagopalan, R.Asokamani and Baldev Raj
       Surface characterization of passive film formed on nitrogen ion implanted Ti-6Al-4V and
       Ti-6Al-7Nb alloys using SIMS
       CORROSION SCIENCE 45 (9): 1951-1967 SEP 2003

       Times Cited (without self citation): 6                                Times Cited :    6

 67_1.       Song HJ, Kim MK, Jung GC, et al.
             The effects of spark anodizing treatment of pure titanium metals and titanium alloys on
             corrosion characteristics
             SURFACE & COATINGS TECHNOLOGY 201 (21): 8738-8745 AUG 25 2007

 67_2.       Masmoudi M, Assoul M, Wery M, et al.
             Friction and wear behaviour of cp Ti and Ti6A14V following nitric acid passivation
             APPLIED SURFACE SCIENCE 253 (4): 2237-2243 DEC 15 2006

 67_3.       Liu YZ, Zu XT, Qiu SY, et al.
             Improvement of tribological behavior of a Ti-Al-V alloy by nitrogen ion implantation
             RARE METALS 25: 309-314 Sp. Iss. SI OCT 2006


      Source: Web of Science & Google Scholar (As on 03-03-2009)                      Page 44 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

 67_4.       Vadiraj A, Kamaraj M
             Fretting fatigue studies of titanium nitride-coated biomedical titanium alloys
             Journal Of Materials Engineering And Performance 15 (5): 553-557 OCT 2006

 67_5.       Masmoudi M, Capek D, Abdelhedi R, et al.
             Application of surface response analysis to the optimisation of nitric passivation of cp
             titanium and Ti6Al4V
             SURFACE & COATINGS TECHNOLOGY 200 (24): 6651-6658 AUG 1 2006

 67_6.       Liu YZ, Zu XT, He X, et al.
             Improvement of tribological behavior of a Ti-Al-Zr alloy by nitrogen ion implantation
             NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM
             INTERACTIONS WITH MATERIALS AND ATOMS 248 (1): 42-46 JUL 2006

68.         Morphological approach to extract ridge and valley connectivity networks from Digital
            Elevation Models
            Sagar BSD, Murthy MBR, Rao CB, Raj B
            International Journal Of Remote Sensing, 24 (3): 573-581 FEB 10 2003

            Times Cited (without self citation): 6                      Times Cited :   6

68_1.        Tay LT, Sagar BSD, Chuah HT
             Granulometric analyses of basin-wise DEMs: a comparative study
             INTERNATIONAL JOURNAL OF REMOTE SENSING 28 (15): 3363-3378 2007

68_2.        Tay LT, Sagar BSD, Chuah HT
             Derivation of terrain roughness indicators via granulometries
             INTERNATIONAL JOURNAL OF REMOTE SENSING 26 (18): 3901-3910 SEP 20 2005

68_3.        Tay LT, Sagar BSD, Chuah HT
             Analysis of geophysical networks derived from multiscale digital elevation models: A
             morphological approach
             IEEE Geoscience and Remote Sensing Letters 2 (4): 399-403 OCT 2005

68_4.        Sagar BSD
             Discrete simulations of spatio-temporal dynamics of small water bodies under varied
             stream flow discharges
             Nonlinear Processes in Geophysics 12 (1): 31-40 2005

68_5.        Sagar BSD, Tien TL
             Allometric power-law relationships in a Hortonian fractal digital elevation model
             Geophysical Research Letters 31 (6): Art. No. L06501 MAR 17 2004

68_6.        Radhakrishnan P, Lian TL, Sagar BSD
             Estimation of fractal dimension through morphological decomposition
             Chaos Solitons & Fractals 21 (3): 563-572 JUL 2004

69.      KESAVAMOORTHY R, RAO CB, BALDEV RAJ
         Instability of a 2-Dimensional Colloidal Crystal at a Water-Air Interface
         Journal Of Physics-Condensed Matter 5 (47): 8805-8814 NOV 22 1993

         Times Cited (without self citation): 6                            Times Cited :    6

69_1.      Hu JW, Han GB, Ren B, et al.
           Theoretical consideration on preparing silver particle films by adsorbing nanoparticles
           from bulk colloids to an air-water interface
           LANGMUIR 20 (20): 8831-8838 SEP 28 2004

69_2.      Mbamala EC, von Grunberg HH
           Charged colloids and proteins at an air-water interface: The effect of dielectric substrates
           on interaction and phase behavior
           PHYSICAL REVIEW E 67 (3): Art. No. 031608 Part 1 MAR 2003



      Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 45 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

69_3.      Mbamala EC, von Grunberg HH
           Effective interaction of a charged colloidal particle with an air-water interface
           JOURNAL OF PHYSICS-CONDENSED MATTER 14 (19): 4881-4900 MAY 20 2002

69_4.      Madsen A, Konovalov O, Robert A, et al.
           Surface ordering in a concentrated suspension of colloidal particles investigated by x-ray
           scattering methods
           PHYSICAL REVIEW E 64 (6): Art. No. 061406 Part 1 DEC 2001

69_5.      Stamou D, Duschl C, Johannsmann D
           Long-range attraction between colloidal spheres at the air-water interface: The
           consequence of an irregular meniscus
           PHYSICAL REVIEW E 62 (4): 5263-5272 Part B OCT 2000

69_6.      Kesavamoorthy R, Rao CB
           Defects in colloidal crystal
           BULLETIN OF MATERIALS SCIENCE 20 (4): 565-572 JUL 1997

70.     Geetha Manivasagam, U. Kamachi Mudali, R. Asokamani and Baldev Raj
        Corrosion and microstructural aspects of titanium and its alloys as orthopaedic devices
        Corrosion Reviews 21 (2-3): 125-159 2003

        Times Cited (without self citation): 5                                 Times Cited :     6

70_1.       Majumdar P, Singh SB, Chakraborty A
            Wear response of heat-treated Ti-13Zr-13Nb alloy in dry condition and simulated
            body fluid
            WEAR Vol.264 (11-12), pp.1015-1025, 2008

70_2.       Zielinski A, Sobieszczyk S
            Corrosion of titanium biomaterials, mechanisms, effects and modelisation
            CORROSION REVIEWS Vol.26 (1) pp.1-22, 2008

70_3.       Armitage DA, Mihoc R, Tate TJ, et al.
            The oxidation of calcium implanted titanium in water: A depth profiling study
            Applied Surface Science 253 (8): 4085-4093 FEB 15 2007

70_4.       Vadiraj A, Kamaraj M, Mudali UK and Nath A K
            Effect of surface modified layers on fretting fatigue damage of biomedical titanium
            alloys
            Materials Science and Technology 22 (9): 1119-1125 SEP 2006

70_5.       Mythili R, Paul VT, Saroja S, Vijayalakshmi, M and Raghunathan, VS
            Study of transformation behavior in a Ti-4.4 Ta-1.9 Nb alloy
            Materials Science And Engineering A-Structural Materials Properties Microstructure
            And Processing 390 (1-2): 299-312 JAN 15 2005

71.    S. Vaidyanathan, V. Moorthy, T. Jayakumar and Baldev Raj
       Evaluation of carburization depth in service exposed ferritic steel using magnetic Barkhausen
       noise analysis
       MATERIALS EVALUATION 56 (3): 449-452 MAR 1998

       Times Cited (without self citation): 5                       Times Cited:    6

71_1.        Blaow M, Evans JT, Shaw BA
             Surface decarburisation of steel detected by magnetic Barkhausen emission
             JOURNAL OF MATERIALS SCIENCE 40 (20): 5517-5520 OCT 2005

71_2.        Moorthy V, Shaw BA, Brimble K
             Testing of case depth in case carburized gear steels using magnetic barkhausen
             emission technique
             MATERIALS EVALUATION 62 (5): 523-527 MAY 2004



      Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 46 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

71_3.        Moorthy V, Shaw BA, Evans JT
             Evaluation of tempering induced changes in the hardness profile of case-carburised
             EN36 steel using magnetic Barkhausen noise analysis
             NDT & E INTERNATIONAL 36 (1): 43-49 JAN 2003

71_4.        Stevens KJ, Tack AJ, Thomas CW, et al.
             Through-wall carburization detection in ethylene pyrolysis tubes
             JOURNAL OF PHYSICS D-APPLIED PHYSICS 34 (5): 814-822 MAR 7 2001

71_5.        Zhu B, Johnson MJ, Jiles DC
             Evaluation of wear-induced material loss in case-hardened steel using magnetic
             Barkhausen emission measurement
             IEEE TRANSACTIONS ON MAGNETICS 36 (5): 3602-3604 Part 1 SEP 2000

72.       S. Vaidyanathan, V. Moorthy, P. Kalyanasundaram, T. Jayakumar and Baldev Raj
          Effect of different stages of tensile deformation on micromagnetic parameters in high-
          strength, low-alloy steel
          Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science,
          30 (8): 2067-2072 AUG 1999

          Times Cited (without self citation): 4                           Times Cited :      6

72_1.        Moorthy V, Shaw BA, Hopkins P
             Magnetic Barkhausen emission technique for detecting the overstressing during
             bending fatigue in case-carburised En36 steel
             NDT & E INTERNATIONAL 38 (2): 159-166 MAR 2005
72_2.        Moorthy V, Shaw BA, Day S
             Evaluation of applied and residual stresses in case-carburised En36 steel subjected to
             bending using the magnetic Barkhausen emission technique
             ACTA MATERIALIA 52 (7): 1927-1936 APR 2004
72_3.        Iordache VE, Hug E, Buiron N
             Magnetic behaviour versus tensile deformation mechanisms in a non-oriented Fe-(3
             wt.%)Si steel
             Materials Science and Engineering A-Structural Materials Properties Microstructure
             and Processing 359 (1-2): 62-74 OCT 25 2003
72_4.        Baudouin P, Houbaert Y
             The study of a uniaxial deformation effect on the magnetic properties of a non-
             oriented electrical steel using acoustic emission characterization
             Journal Of Magnetism and Magnetic Materials 246 (1-2): 247-253 APR 2002

73.       C.K. Mukhopadhyay, T. Jayakumar, K.V. Kasiviswanathan and Baldev Raj
          Study of Aging-Induced Alpha'-Martensite Formation In Cold-Worked Aisi-Type-304-
          Stainless-Steel Using An Acoustic-Emission Technique
          JOURNAL OF MATERIALS SCIENCE 30 (18): 4556-4560 SEP 15 1995

          Times Cited (without self citation): 2                               Times Cited:       6

73_1.        Padilha AF, Plaut RL, Rios PR
             Annealing of cold-worked austenitic stainless steels
             ISIJ INTERNATIONAL 43 (2): 135-143 2003
73_2.        Rathbun RW, Matlock DK, Speer JG
             Strain aging behavior of austenitic stainless steels containing strain induced
             martensite
             SCRIPTA MATERIALIA 42 (9): 887-891 APR 21 2000

74.        Moorthy V, Jayakumar T, Baldev Raj
           Acoustic-Emission Behavior During Stage-II Fatigue-Crack Growth In An AISI Type-316
           Austenitic Stainless-Steel
           Bulletin Of Materials Science 17 (6): 699-715 NOV 1994

           Times Cited (without self citation): 1                      Times Cited :    6


      Source: Web of Science & Google Scholar (As on 03-03-2009)                       Page 47 of 65
                                 Citations of Dr. Baldev Raj
                               Distinguished Scientist & Director, IGCAR

74_1.        Roberts TM, Talebzadeh M
             Acoustic emission monitoring of fatigue crack propagation
             JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH 59 (6): 695-712 JUN 2003

75.    Jayakumar T, Baldev Raj, Willems H
       Acoustic Methods for Characterization of Microstructures and Deformation Processes in
       Nimonic Alloy PE16
       Transactions of The Indian Institute of Metals 44 (4): 327-338 AUG 1991

       Times Cited (without self citation): 1                              Times Cited :       6

75_1.      Shah BK, Kumar A, Bandyopadhyay M, Bandyopadhyay AK and Kulkarni P G
           Qualification of beta beat-treatment of uranium fuel rods using ultrasonics
           INSIGHT 41 (11): 707-709 NOV 1999

76.     Baldev Raj, Choudhary BK, Raman RKS
        Mechanical properties and non-destructive evaluation of chromium-molybdenum ferritic
        steels for steam generator application
        International Journal Of Pressure Vessels And Piping 81 (6): 521-534 JUN 2004

        Times Cited (without self citation): 5                            Times Cited :    5

76_1.         Kim BJ, Kim HJ, Lim BS
              Creep-fatigue damage and life prediction in P92 alloy by focused ultrasound
              measurements
              METALS AND MATERIALS INTERNATIONAL Vol.14 (4) , 391-395 2008
76_2.         Fournier B, Sauzay M, Caes C, et al.
              Creep-fatigue-oxidation interactions in a 9Cr-1Mo martensitic steel. Part 1: Effect of
              tensile holding period on fatigue lifetime
              INTERNATIONAL JOURNAL OF FATIGUE Vol.30(4), 649-662, 2008
76_3.         Samuel EI, Choudhary BK, Rao KBS
              Influence of post-weld heat treatment on tensile properties of modified 9Cr-1Mo
              ferritic steel base metal
              MATERIALS SCIENCE AND TECHNOLOGY 23 (8): 992-999 AUG 2007
76_4.         Paul VT, Saroja S, Hariharan P, Rajadurai, A., Vijayalakshmi M
              Identification of microstructural zones and thermal cycles in a weldment of modified
              9Cr-1Mo steel
              JOURNAL OF MATERIALS SCIENCE 42 (14): 5700-5713 JUL 2007
76_5.         Ginsztler J, Nam SW, Szabo PJ
              Factors affecting the change of subgrain size of 15Mo3 steel during creep
              MATERIALS AT HIGH TEMPERATURES 21 (4): 187-192 2004


77.       Geetha M, Mudali UK, Pandey ND, Asokamani R and Baldev Raj
          Microstructural and corrosion evaluation of laser surface nitrided Ti-13Nb-13Zr alloy
          SURFACE ENGINEERING 20 (1): 68-74 FEB 2004

          Times Cited (without self citation): 5                             Times Cited :     5

77_1.        Shin HJ, Yoo YT
             Microstructural and hardness investigation of hot-work tool steels by laser surface
             treatment
             Journal of Materials Processing Technology   Vol.201 (1-3)   pp.342-347      2008

77_2.        Yibas BS, Khaled M, Karatas C, et al.
             Electrochemical properties of the laser nitrided surfaces of Ti-W-4V alloy
             SURFACE & COATINGS TECHNOLOGY 201 (3-4): 679-685 OCT 5 2006

77_3.        Santos EC, Morita M, Shiomi M, et al.
             Laser gas nitriding of pure titanium using CW and pulsed Nd : YAG lasers
             SURFACE & COATINGS TECHNOLOGY 201 (3-4): 1635-1642 OCT 5 2006

77_4.        Vadiraj A, Kamaraj M, Mudali UK and Nath A K
             Effect of surface modified layers on fretting fatigue damage of biomedical titanium

      Source: Web of Science & Google Scholar (As on 03-03-2009)                       Page 48 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

             alloys, MATERIALS SCIENCE AND TECHNOLOGY 22 (9): 1119-1125 SEP 2006

77_5.        Steyer P, Valette S, Forest B, et al.
             Surface modification of martensitic stainless steels by laser marking and its
             consequences regarding corrosion resistance
             SURFACE ENGINEERING 22 (3): 167-172 JUN 2006

78.     Murugan S, Kumar PV, Baldev Raj and Bose M S C
        Temperature distribution during multipass welding of plates
        International Journal Of Pressure Vessels And Piping 75 (12): 891-905 Oct 1998

        Times Cited (without self citation): 4                               Times Cited :    5

78_1.       Lu QH, Chen LG, Ni CZ
            Improving welded valve quality by vibratory weld conditioning
            Materials Science and Engineering A-Structural Materials Properties Microstructure and
            Processing 457 (1-2): 246-253 MAY 25 2007
78_2.       Dong ZB, Wei YH
            Three dimensional modeling weld solidification cracks in multipass welding
            Theoretical and Applied Fracture Mechanics 46 (2): 156-165 OCT 2006
78_3.       Xu JJ, Zhu ZQ, Chen LG, et al.
            Temperature distribution and residual stresses during multipass narrow gap welding of
            thick plates
            MATERIALS SCIENCE AND TECHNOLOGY 22 (2): 232-236 FEB 2006
78_4.       Jiang W, Yahiaoui K, Hall FR
            Finite element predictions of temperature distributions in a multipass welded piping
            branch junction
            Journal of Pressure Vessel Technology-Transactions of the ASME 127 (1): 7-12 FEB
            2005

79.        SUBRAMANIAN CV, THAVASIMUTHU M, PALANICHAMY P, Bhattacharya DK & Baldev Raj
           Evaluation Of Bond Integrity In Sandwiched Structures By Dry Couplant Ultrasonic
           Technique
           NDT INTERNATIONAL 24 (1): 29-31 FEB 1991

           Times Cited (without self citation): 4                               Times Cited: 5

79_1.        Pandurangan P, Buckner GD
             Defect identification in GRID-LOCK (R) joints
             NDT & E INTERNATIONAL 40 (5): 347-356 JUL 2007
79_2.        Pandurangan P, Buckner GD
             Assessment of damage detection methods in Grid-Lock (R) structures
             Mechanical Systems and Signal Processing 21 (5): 2185-2197 JUL 2007
79_3.        Dattoma V, Marcuccio R, Pappalettere C, et al.
             Thermographic investigation of sandwich structure made of composite material
             NDT & E INTERNATIONAL 34 (8): 515-520 DEC 2001
79_4.        Lethiecq M, Perdrix M
             Automatic Discrimination Techniques For Ndt Of Metal Ceramic Bonds
             NDT & E INTERNATIONAL 24 (6): 307-311 DEC 1991

80.       Ajikumar P. K., Sankaran Ananthi.; Kamruddin M. ; Nithya R. ; Shankar P. ; Dash S. ;
          Tyagi A. K. ; Raj Baldev ;
          Morphology and growth aspects of Cr(N) phases on gas nitridation of electroplated
          chromium on AISI 316 LN stainless steel
          Surface & Coatings Technology Vol.201(1-2), 102-107, 2006

          Times Cited (without self citation): 4                            Times Cited : 5

80_1.     Vorster WJJ, Korsunsky AM
          Analysis of residual strain and stress states due to heat treatment and thermal processing
          Journal of Strain Analysis for Engineering Design Volume: 44 Issue: 1 Special Issue:
          Sp. Iss. SI pp.71-91, JAN 2009

80_2.     Lee HY, Lee SH, Kim JH, et al.

      Source: Web of Science & Google Scholar (As on 03-03-2009)                      Page 49 of 65
                                 Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

          Thermally nitrided Cu-5.3Cr alloy for application as metallic separators in PEMFCs
          International Journal of Hydrogen Energy Vol.33 (15) pp.4171-4177, 2008

80_3.     Tam PL, Zhou ZF, Shum PW, et al.
          Structural, mechanical, and tribological studies of Cr-Ti-Al-N coating with different
          chemical compositions
          THIN SOLID FILMS Vol.516 (16), pp.5725-5731, 2008

80_4.     Formation behavior of Cr-nitride by thermal nitridation in two-phase Cu-Cr alloy for
          application in metallic separators in PEMFCs
          Lee HY, Lee SH, Kim JH, et al.
          Journal of the Korean Institute of Metals and Materials, Vol.45(11), pp.602-608, 2007

81.     Kalyanasundaram P, Rajagopalan C, Subramanian CV, Thavasimuthu M and Baldev Raj
        Ultrasonic Signal Analysis for Defect Characterization in Composite-Materials
        British Journal Of Non-Destructive Testing 33 (5): 221-226 MAY 1991

        Times Cited (without self citation): 3                                     Times Cited :   5

81_1.       Wu HC, Gupta N, Mylavarapu PS
            Blind multiridge detection for automatic nondestructive testing using ultrasonic signals
            Ieee Transactions On Ultrasonics Ferroelectrics And Frequency Control 53 (10): 1902-
            1911 OCT 2006
81_2.       Gan TH, Hutchins DA, Billson DR, et al.
            The use of broadband acoustic transducers and pulse-compression techniques for air-
            coupled ultrasonic imaging
            ULTRASONICS 39 (3): 181-194 APR 2001
81_3.       Anastassopoulos AA, Nikolaidis VN, Philippidis TP
            A comparative study of pattern recognition algorithms for classification of ultrasonic
            signals
            NEURAL COMPUTING & APPLICATIONS 8 (1): 53-66 1999

82.     Baldev Raj, V. Moorthy and S. Vaidyanathan
        Influence of microstructural changes due to tempering at 923 K and 1,0123 K on magnetic
        Barkhausen noise behavior in normalized 2.25Cr-1Mo ferritic steel
        MATERIALS EVALUATION 55 (1): 81-84 JAN 1997

        Times Cited (without self citation): 3                (-)              Times Cited :   5

82_1.        Park SS, Chang KO, Park DG, et al.
             Nondestructive evualuation of the irradiated Mn-Mo-Ni low alloy steel by magnetic
             methods, KEY ENGINEERING MATERIALS 270-273: 657-661 Part 1-3 2004
82_2.        Chang KO, Chi SH, Choi KJ, et al.
             Changes in magnetic parameters of neutron irradiated RPV Linde80 high copper weld
             surveillance specimens
             International Journal of Pressure Vessels And Piping 79 (11): 753-757 NOV 2002
82_3.        Chi SH, Chang KO, Hong JH, et al.
             Changes in magnetic parameters of neutron irradiated SA 508 Cl. 3 reactor pressure
             vessel forging and weld surveillance specimens
             Journal of Applied Physics 85 (8): 6043-6045 Part 2B APR 15 1999

83.     Rajagopalan C, Baldev Raj, Kalyanasundaram P
        The role of artificial intelligence in non-destructive testing and evaluation
        INSIGHT 38 (2): 118-123 FEB 1996

        Times Cited (without self citation): 3                (-)              Times Cited:    5

83_1.       Jarmulak J, Kerckhoffs EJH, Van't Veen PP
            Case-based reasoning for interpretation of data from non-destructive testing
            Engineering Applications of Artificial Intelligence 14 (4): 401-417 AUG 2001


      Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 50 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR


83_2.       Upadhyaya BR, Yan W, Behravesh MM, et al.
            Development of a diagnostic expert system for eddy current data analysis using
            applied artificial intelligence methods
            NUCLEAR ENGINEERING AND DESIGN 193 (1-2): 1-11 SEP 1999
83_3.       Jarmulak J, van't Veen PP, Kerckhoffs EJH
            Use of case-based reasoning for interpretation of data from NDT
            INSIGHT 41 (10): 642-649 OCT 1999


84.     M.T. Shyamsunder, C. Rajagopalan, K.K. Ray and Baldev Raj
        A Comparative-Study Of Conventional and Artificial Neural-Network Classifiers for Eddy-
        Current Signal Classification
        INSIGHT 37 (1): 26-30 JAN 1995

        Times Cited (without self citation): 3                     Times Cited :    5

84_1.        Liu Z, Forsyth DS, Komorowski JP, et al.
             Survey: State of the art in NDE data fusion techniques
             IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT                   Vol.56 (6)
             pp.2435-2451, DEC 2007
84_2.        De Mesquita RN, Ting DKS, Cabral ELL, et al.
             Classification of steam generator tube defects for real-time applications using eddy
             current test data and self-organizing maps
             REAL-TIME SYSTEMS 27 (1): 49-70 MAY 2004
84_3.        Liu Z, Forsyth DS, Lepine BA, et al.
             Investigations on classifying pulsed eddy current signals with a neural network
             INSIGHT 45 (9): 608-614 SEP 2003

85.    Rodriguez P, Baldev Raj
       Development of In-service Inspection techniques for nuclear power plants in India
       INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING 73 (1): 59-68 AUG 1997

       Times Cited (without self citation): 3                (-)          Times Cited :      5


85_1.        Inoue T, Sueoka A, Nakano Y, et al.
             Vibrations of probe used for the defect detection of helical heating tubes in a fast
             breeder reactor - Part 1. Experimental results by using mock-up
             Nuclear Engineering And Design 237 (8): 858-867 APR 2007
85_2.        Dong LH, Xu BS, Dong SY, et al.
             Metal magnetic memory testing for early damage assessment in ferromagnetic
             Materials
             Journal Of Central South University of Technology 12: 102-106 Suppl. 2 OCT 2005
85_3.        Petri MC, Wei TYC, Kupperman DS, et al.
             Eddy current signal deconvolution technique for the improvement of steam generator
             tubing burst pressure predictions
             JOURNAL OF NONDESTRUCTIVE EVALUATION 19 (4): 149-164 DEC 2000

86 .     C.K. Mukhopadhyay, T. Jayakumar, Baldev Raj, K K Ray
         Acoustic emission-stress intensity factor relations for tensile deformation of notched
         specimens of AISI type 304 stainless steel
         Materials Science and Engineering A-Structural Materials Properties Microstructure and
         Processing Vol.293 (1-2) pp.137-145, Nov. 2000

         Times Cited (without self citation): 3                            Times Cited : 5

86_1.     Title: Acoustic emissions during fracture toughness tests of steels exhibiting varying
          ductility
          H. Roy, N. Parida, S. Sivaprasad, S. Tarafder and K.K. Ray

      Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 51 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

          Source: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS
          PROPERTIES MICROSTRUCTURE AND PROCESSING Volume: 486 Issue: 1-2 Pages:
          562-571 Published: JUN 15 2008
86_2.     Thermodynamic investigation on the formation of inclusions containing MgAl2O4 spinel
          during 16Cr-14Ni austenitic stainless steel manufacturing processes
          Author(s): Park JH
          Source: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS
          PROPERTIES MICROSTRUCTURE AND PROCESSING Volume: 472 Issue: 1-2 Pages:
          43-51 Published: JAN 15 2008
86_3.     Formation mechanism of spinel-type inclusions in high-alloyed stainless steel melts
          Author(s): Park JH
          Source: METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND
          MATERIALS PROCESSING SCIENCE Volume: 38 Issue: 4 Pages: 657-663 Published:
          AUG 2007


87.     M. Vasudevan, A.K. Bhaduri, Baldev Raj and K. Prasad Rao
        Delta ferrite prediction in stainless steel welds using neural network analysis and comparison
        with other prediction methods
        JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 142 (1): 20-28 NOV 10 2003

        Times Cited (without self citation): 3                                      Times Cited :        5

87_1.        Chi K, Maclean MS, McPherson NA, et al.
             Single sided single pass submerged arc welding of austenitic stainless steel
             MATERIALS SCIENCE AND TECHNOLOGY 23 (9): 1039-1048 SEP 2007
87_2.        Curcio S, Calabro V, Iorio G
             Reduction and control of flux decline in cross-flow membrane processes modeled by
             artificial neural networks
             JOURNAL OF MEMBRANE SCIENCE 286 (1-2): 125-132 DEC 15 2006
87_3.        Curcio S, Scilingo G, Calabro V, et al.
             Ultrafiltration of BSA in pulsating conditions: an artificial neural networks approach
             JOURNAL OF MEMBRANE SCIENCE 246 (2): 235-247 JAN 15 2005

88.    Raj B, Mudali UK, Jayakumar T, Kasi Viswanathan K V and Natarajan R
       Meeting the challenges related to material issues in chemical industries
       Sadhana-Academy Proceedings in Engineering Sciences Volume: 25 Pages: 519-559
       Part: Part 6 Published: DEC 2000

       Times Cited (without self citation): 2                       Times Cited :    5

88_1.     Das Gupta Arup, A; Saroja S. ; Khatirkar R.; Vijayalakshmi M. ; Samajdar I.
          Study of texture and microtexture during beta to alpha plus beta transformation in a
          Ti-5Ta-1.8Nb alloy
          Materials Science and Engineering A-Structural Materials Properties Microstructure and
          Processing Vol.485 (1-2) pp.581-588, June 2008

88_2.     Ravi Shankar, R.K. Dayal, R. Balasubramaniam, V.R. Raju, R. Mythili, S. Saroja, M.
          Vijayalakshmi and V.S. Raghunathan
          Effect of heat treatment on the corrosion behaviour of Ti-5Ta-1.8Nb alloy in boiling
          concentrated nitric acid
          JOURNAL OF NUCLEAR MATERIALS Vol.372 (2-3) pp.277-284, 2008

89.          Krishnan, R;Dash, S;Sole, RK;Tyagi, AK; Baldev Raj;
             Fabrication and characterisation of laser surface modified plasma sprayed alumina
             coatings
             Surface Engineering, 18 (3): 208-212 JUN 2002

             Times Cited (without self citation): 2               Times Cited : 5
89_1.        Ctibor P, Kraus L, Tuominen J, et al.
             Improvement of mechanical properties of alumina and zirconia plasma sprayed coatings
             induced by laser post-treatment
             CERAMICS-SILIKATY Vol.51 (4) pp.181-189, 2007

89_2.        Dubourg L, Lima RS, Moreau C

      Source: Web of Science & Google Scholar (As on 03-03-2009)                         Page 52 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

             Properties of alumina-titania coatings prepared by laser-assisted air plasma spraying
             Surface & Coatings Technology 201 (14): 6278-6284 APR 2 2007

90.       Baldev Raj, S.L. Mannan, P.R. Vasudeva Rao and M.D. Mathew
          Development of fuels and structural materials for fast breeder reactors
          Sadhana-Academy Proceedings In Engineering Sciences 27: 527-558 Part 5 OCT 2002
          Times Cited (without self citation): 1                      Times Cited : 5

90_1.        R. Acharya, A.G.C. Nair, A.V.R. Reddy and A. Goswami
             Application of k(0)-based internal mono standard instrumental neutron activation
             analysis method method for composition analysis of stainless steel clad sample
             ANALYTICA CHIMICA ACTA 522 (1): 127-132 SEP 20 2004

91.    Moorthy V, Jayakumar T, Raj B
       Acoustic-Emission Technique for Detecting Microyeilding and Macroyielding in Solution-
       Annealed AISI Type-316 Austenitic Stainless-Steel
       International Journal of Pressure Vessels and Piping Vol.64 (2) pp.161-168 , 1995

       Times Cited (without self citation): - Nil-                   Times Cited :      5

92.           K.Varatharajan, S. Dash, A. Arunkumar, R. Nithya, A.K. Tyagi and Baldev Raj
              Synthesis of nanocrystalline alpha-Al2O3 by ultrasonic flame pyrolysis
              MATERIALS RESEARCH BULLETIN 38 (4): 577-583 MAR 24 2003

              Times Cited (without self citation): 4                        Times Cited :       4

92_1.         Kucza W, Oblakowski J, Gajerski R, et al.
              Synthesis and characterization of alumina- and zirconia-based powders obtained by
              the ultrasonic spray pyrolysis
              JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY 88 (1): 65-69 APR 2007
92_2.         Kavitha R, Jayaram V
              Deposition and characterization of alumina films produced by combustion flame
              pyrolysis
              SURFACE & COATINGS TECHNOLOGY 201 (6): 2491-2499 DEC 4 2006
92_3.         Padmanabhan PVA, Sreekumar KP, Thiyagarajan TK, et al.
              Nano-crystalline titanium dioxide formed by reactive plasma synthesis
              VACUUM 80 (11-12): 1252-1255 SEP 7 2006
92_4.         Tok AIY, Boey FYC, Du SW, et al.
              Flame spray synthesis of ZrO2 nano-particles using liquid precursors
              Materials Science And Engineering B-Solid State Materials For Advanced Technology
              130 (1-3): 114-119 Jun 15 2006

93.           V. Karthik, K. Laha, K.V. Kasiviswanathan and Baldev Raj.
              Determination of gradients in mechanical properties of 2.25Cr-1Mo weldments using
              shear-punch tests
              WELDING JOURNAL 81 (12): 265S-272S DEC 2002

              Times Cited (without self citation): 4                    Times Cited :       4

93_1.         Francis JA, Bhadeshia HKDH, Withers PJ
              Welding residual stresses in ferritic power plant steels
              MATERIALS SCIENCE AND TECHNOLOGY 23 (9): 1009-1020 SEP 2007
93_2.         Elwazri AM, Varano R, Wanjara P, et al.
              Effect of specimen thickness and punch diameter in shear punch testing
              CANADIAN METALLURGICAL QUARTERLY 45 (1): 33-39 JAN 2006
93_3.         Wanjara P, Drew RAL, Yue S
              Application of small specimen testing technique for mechanical property assessment
              of discontinuously reinforced composites
              MATERIALS SCIENCE AND TECHNOLOGY 22 (1): 61-71 2006
93_4.         Pan C
              Direct fractographic and microstructural evaluation of different zones within welded
              dissimilar steel joints


      Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 53 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

              MATERIALS SCIENCE AND TECHNOLOGY 21 (6): 657-664 JUN 2005

94.      Vasudevan M, Bhaduri AK, Raj B, K. Prasad Rao
         Genetic-algorithm-based computational models for optimizing the process parameters of A-
         TIG welding to achieve target bead geometry in type 304 L(N) and 316 L(N) stainless steels
         MATERIALS AND MANUFACTURING PROCESSES Vol.22 (5-6) pp.641-649, 2007

         Times Cited (without self citation): 4                          Times Cited : 4

94._1     Genetic Algorithms, a Nature-Inspired Tool: Survey of Applications in Materials Science
          and Related Fields
          Paszkowicz W
          MATERIALS AND MANUFACTURING PROCESSES Vol.24 (2) pp.174-197 2009
94_2.     Soft Computing Techniques in Stainless Steel Welding
          Author(s): Vasudevan M
          Source: MATERIALS AND MANUFACTURING PROCESSES Volume: 24 Issue: 2 Pages:
          209-218 Published: 2009
94_3.     Ganguly S, Datta S, Chattopadhyay PP, et al.
          Designing the Multiphase Microstructure of Steel for Optimal TRIP Effect: A Multiobjective
          Genetic Algorithm Based Approach
          MATERIALS AND MANUFACTURING PROCESSES Vol.24 (1) pp.31-37 2009
94_4.     Mitra K
          Genetic algorithms in polymeric material production, design, processing and other
          applications: a review
          INTERNATIONAL MATERIALS REVIEWS Vol.53 (5) pp.275-297, SEP 2008

95.       A S Khanna, B B Jha, Baldev Raj
          Acoustic-Emission Technique - An Alternative Method To Study The Brittle Oxide Formed
          On Copper
          OXIDATION OF METALS 27 (1-2): 95-102 FEB 1987

          Times Cited (without self citation): 4                               Times Cited:    4

95_1.        Peng X, Li T, Wu W, Et Al.
             Effect Of La2O3 Particles On Microstructure And Cracking-Resistance Of Nio Scale On
             Electrodeposited Nickel Films
             Materials Science and Engineering A-Structural Materials Properties Microstructure And
             Processing 298 (1-2): 100-109 JAN 31 2001
95_2.        Sulistijono, Bouden A, Cherfaoui M, et al.
             Oxidation of Zircaloy-4 With High-Temperature Air
             Journal De Physique IV 3 (C9): 439-445 Part 1 Dec 1993
95_3.        Schmutzler Hj, Grabke Hj
             Application of an Acoustic-Emission Technique to the High-Temperature Oxidation Of
             Fe-Cr-Al Alloys
             Oxidation Of Metals 39 (1-2): 15-29 Feb 1993
95_4.        Tiefan L, Meishuan L, Henrong G
             Critical Cracking Stress of Oxide Scales of Tantalum due to Oxidation
             Materials Science and Engineering A-Structural Materials Properties Microstructure and
             Processing 120: 235-238 Part 1 Nov 15 1989

96.     P.K. Ajikumar, M. Kamruddin, R. Nithya, P. Shankar, S. Dash, A.K. Tyagi and Baldev Raj,
        Surface nitridation of Ti and Cr in ammonia atmosphere
        SCRIPTA MATERIALIA 51 (5): 361-366 SEP 2004

        Times Cited (without self citation): 3                                Times Cited:    4

96_1.         Liu G, Zhang HM, Wang MR, et al.
              Preparation, characterization of ZrOxNy/C and its application in PEMFC as an
              electrocatalyst for oxygen reduction
              JOURNAL OF POWER SOURCES 172 (2): 503-510 OCT 25 2007
96_2.         Santos EC, Morita M, Shiomi M, et al.
              Laser gas nitriding of pure titanium using CW and pulsed Nd : YAG lasers
              SURFACE & COATINGS TECHNOLOGY 201 (3-4): 1635-1642 OCT 5 2006

      Source: Web of Science & Google Scholar (As on 03-03-2009)                     Page 54 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

96_3.         Materazzi S, Gentili A, Curini R
              Applications of evolved gas analysis - Part 2: EGA by mass spectrometry
              TALANTA 69 (4): 781-794 JUN 15 2006

97.    P. Shankar, P. Palanichamy, T. Jayakumar, Baldev Raj and S. Ranganathan
       Nitrogen redistribution, microstructure, and elastic constant evaluation using ultrasonics in
       aged 316LN stainless steels
       Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science 32 (12):
       2959-2968 DEC 2001

       Times Cited (without self citation): 3                                      Times Cited :    4

97_1.        Yamamoto A, Nakahigashi S, Terasawa M, et al.
             High-temperature and high-pressure in situ SCC device for synchrotron radiation
             diffraction experiments and application using an austenitic stainless steel
             JOURNAL OF SYNCHROTRON RADIATION 13: 14-18 Part 1 JAN 2006
97_2.        Yamamoto A, Yamada T, Nakahigashi S, et al.
             Effects of surface grinding on hardness distribution and residual stress in low carbon
             austenitic stainless steel SUS316L
             ISIJ INTERNATIONAL 44 (10): 1780-1782 2004
97_3.        Palanichamy P, Vasudevan M
             Ultrasonic testing of annealing behavior and texture and determination of texture
             coefficients in stainless steel
             MATERIALS EVALUATION 61 (9): 1020-1025 SEP 2003

98.      Philip J, Shima PD, Raj B
         Nanofluid with tunable thermal properties
         APPLIED PHYSICS LETTERS Volume: 92 Issue: 4 Article Number: 043108               JAN 28 2008

         Times Cited (without self citation): 2                            Times Cited : 4


98_2.     Ayyappan S, Gnanaprakash G, Panneerselvam G, Antony MP and John Philip
          Effect of Surfactant Monolayer on Reduction of Fe3O4 Nanoparticles under Vacuum
          JOURNAL OF PHYSICAL CHEMISTRY C Vol.112 (47), 18376-18383 NOV 27 2008

98_3.     Li L, Zhang YW, Ma HB, et al.
          An investigation of molecular layering at the liquid-solid interface in nanofluids by
          molecular dynamics simulation
          PHYSICS LETTERS A Volume: 372 Issue: 25, 4541-4544 JUN 16 2008



99.     C.K. Mukhopadhyay, K.V. Kasiviswanathan, T. Jayakumar and Baldev Raj
        Acoustic-Emission From Aging-Induced Martensite Formation In Cold-Worked Aisi Type-304
        Stainless-Steel
        Scripta Metallurgica et Materialia 30 (3): 303-307 Feb 1 1994

        Times Cited (without self citation): 2                     Times Cited:   4

99_1.      Gauzzi F, Montanari R, Principi G, et al.
           AISI 304 steel: anomalous evolution of martensitic phase following heat treatments at 400
           degrees C
           MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES
           MICROSTRUCTURE AND PROCESSING 438: 202-206 Sp. Iss. SI DEC 25 2006
99_2.      Pawelek A, Piatkowski A, Jasienski Z, et al.
           Acoustic emission and strain localization in FCC single crystals compressed in channel-die
           at low temperature
           ZEITSCHRIFT FUR METALLKUNDE 92 (4): 376-381 APR 2001




      Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 55 of 65
                               Citations of Dr. Baldev Raj
                             Distinguished Scientist & Director, IGCAR


100.     M. Thavasimuthu, C. Rajagopalan and Baldev Raj
         Improving the evaluation sensitivity of an ultrasonic pulse echo technique using a neural
         network classifier
         NDT & E INTERNATIONAL 29 (3): 175-179 JUN 1996

         Times Cited (without self citation): 2                            Times Cited :   4

100_1.       Chen J, Shi Y, Shi S
             Noise analysis of digital ultrasonic nondestructive evaluation system
             INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING 76 (9): 619-630 AUG
             1999
100_2.       Stavroulakis GE
             Impact-echo from a unilateral interlayer crack. LCP-BEM modelling and neural
             identification
             ENGINEERING FRACTURE MECHANICS 62 (2-3): 165-184 JAN-FEB 1999

101.   Palanichamy, P., Mathew, M.D., Latha, S., Jayakumar, T., Bhanu Sankara Rao, K.,
       Mannan, S.L., and Baldev Raj
       Assessing microstructural changes in alloy 625 using ultrasonic waves and correlation with
       tensile properties
       SCRIPTA MATERIALIA 45 (9): 1025-1030 NOV 7 2001

       Times Cited (without self citation): 2 +                      Times Cited:   4

101_1.     Das G, Ghosh S, Bose SC, et al.
           Use of ball indentation technique to evaluate room temperature mechanical properties
           of a gas turbine blade
           Materials Science And Engineering A-Structural Materials Properties Microstructure And
           Processing 424 (1-2): 326-332 MAY 25 2006
101_2.     Mathew MD, Rao KBS, Mannan SL
           Creep properties of service-exposed Alloy 625 after re-solution annealing treatment
           Materials Science And Engineering A - Structural Materials Properties Microstructure And
           Processing 372 (1-2): 327-333 MAY 15 2004

102.   Mukhopadhyay CK, Jayakumar T, Baldev Raj and K K Ray
       The influence of notch on the acoustic emission generated during tensile testing of nuclear
       grade AISI type 304 stainless steel
       Materials Science And Engineering A-Structural Materials Properties Microstructure And
       Processing 276 (1-2): 83-90 JAN 15 2000

       Times Cited (without self citation): 1                   Times Cited :   4

102_1.    Hausild P, Karlik M, Chmelik F
          Acoustic emission study of cleavage initiation in A508 steel tested in the DBTT range
          MATERIALS SCIENCE AND TECHNOLOGY 20 (4): 473-477 APR 2004

103.     B.P.C. Rao, Baldev Raj, T. Jayakumar and P. Kalyanasundaram
         A new approach for restoration of eddy current images
         JOURNAL OF NONDESTRUCTIVE EVALUATION 20 (2): 61-72 JUN 2001

         Times Cited (without self citation): 1                    Times Cited :    4

103_1.    El Amrani M, Safouane A
          Restoration of ultrasonic images in nondestructive testing
          CANADIAN JOURNAL OF PHYSICS 82 (8): 661-669 AUG 2004


104.      C. Phaniraj, B.K. Chaudhary, K. Bhanu Sankara Rao and Baldev Raj
          Relationship between time to reach Monkman-Grant ductility and rupture life
          SCRIPTA MATERIALIA 48 (9): 1313-1318 MAY 2003

          Times Cited (without self citation): 1                   Times Cited:     4


   Source: Web of Science & Google Scholar (As on 03-03-2009)                       Page 56 of 65
                               Citations of Dr. Baldev Raj
                             Distinguished Scientist & Director, IGCAR

104_1.       Jeong CS, Lim BS
             Creep life evaluation by micro-cavities
             KEY ENGINEERING MATERIALS 297-300: 1858-1863 Part 1-4 2005

105.     L. Thair, U. Kamachi Mudali, R. Asokamani and Baldev Raj
         Corrosion properties of surface modified Ti-6Al-7Nb alloy under pulsed plasma nitriding
         and nitrogen ion implantation conditions
         SURFACE ENGINEERING 20 (1): 11-16 FEB 2004

         Times Cited (without self citation): 3                             Times Cited :      3

105_1.      Rahman M, Reid I, Duggan P, et al.
            Structural and tribological properties of the plasma nitrided Ti-alloy biomaterials:
            Influence of the treatment temperature
            SURFACE & COATINGS TECHNOLOGY 201 (9-11): 4865-4872 FEB 26 2007
105_2.      Singh R, Dahotre NB
            Corrosion degradation and prevention by surface modification of biometallic materials
            Journal Of Materials Science-Materials In Medicine 18 (5): 725-751 May 2007
105_3.      Rahman M, Hashmi MSJ
            Saddle field fast atom beam source: A new low pressure plasma nitriding method for
            a alloy Ti-6Al-4V
            THIN SOLID FILMS 515 (1): 129-134 SEP 25 2006

106.     BARAT P, KALYANASUNDARAM P, BALDEV RAJ
         Acoustic-Emission Source Location on a Cylindrical Surface
         NDT & E INTERNATIONAL 26 (6): 295-297 DEC 1993

         Times Cited (without self citation): 3                             Times Cited:       3

106_1.       Lympertos EM, Dermatas ES
             Acoustic Emission Source Location In Dispersive Media
             SIGNAL PROCESSING 87 (12): 3218-3225 DEC 2007
106_2.       Spencer SJ
             The Two-Dimensional Source Location Problem for Time Differences of Arrival at
             Minimal Element Monitoring Arrays
             Journal of the Acoustical Society of America 121 (6): 3579-3594 Jun 2007
106_3.       Axinte DA, Natarajan DR, Gindy NNZ
             An approach to use an array of three acoustic emission sensors to locate uneven
             events in machining - Part 1: method and validation
             International Jnl. Of Machine Tools & Manufacture 45 (14): 1605-1613 NOV 2005

107.     N. Raghu, N.G. Muralidharan, T. Jayakumar, K.V. Kasiviswanathan and Baldev Raj
         Failure analysis of turbine blades from aeroengines
         Trans. of The Indian Institute Of Metals 53 (3): 451-455 Sp. Iss. SI JUN 2000

         Times Cited (without self citation): 3                          Times Cited :     3

107_1.     Gurrappa I, Reddy CVK
           Characterization of newly developed structural DMR-1700 steel and comparison with
           different steels for chemical applications
           JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 182 (1-3): 195-201 FEB 2007
107_2.     Gurrappa I, Malakondaiah G
           Corrosion characteristics of newly developed structural DMR-1700 steel and comparison
           with different steels for industrial applications
           METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND
           MATERIALS SCIENCE 37A (10): 3039-3046 OCT 2006
107_3.     Gurrappa I, Malakondaiah G
           Corrosion characteristics of DMR-1700 steel and comparison with different steels in
           marine environment
           MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES
           MICROSTRUCTURE AND PROCESSING 391 (1-2): 235-242 JAN 25 2005


   Source: Web of Science & Google Scholar (As on 03-03-2009)                       Page 57 of 65
                                Citations of Dr. Baldev Raj
                             Distinguished Scientist & Director, IGCAR


108.    P. Mukherjee, P. Barat, T. Jayakumar, P. Kalyanasundaram, C.Rajagopalan & Baldev Raj
        Acoustic emission studies on welded and thermally treated AISI 304 stainless steel during
        tensile deformation
        SCRIPTA MATERIALIA 37 (8): 1193-1198 OCT 15 1997

        Times Cited (without self citation): 2                               Times Cited: 3

108_1      Na EG, Ono K, Lee DW
           Evaluation of fracture behavior of SA-516 steel welds using acoustic emission analysis
           JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY 20 (2): 197-204 FEB 2006
108_2      Mitra A, Srivastava PK, De PK, et al.
           Ferromagnetic properties of deformation-induced martensite transformation in AISI 304
           stainless steel
           Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 35A
           (2): 599-605 FEB 2004

109.    M.T. Shyamsunder, B.P.C. Rao, C. Babu Rao and Baldev Raj,
        A NEW TANDEM PROBE DESIGN FOR PHASED-ARRAY EDDY-CURRENT TESTING
        INSIGHT 36 (6): 434-436 JUN 1994

        Times Cited (without self citation): 2                   Times Cited:    3


           Hoshikawa H, Koyama K
109_1.     Eddy current distribution using parameters normalized by standard penetration depth
           MATERIALS EVALUATION 57 (6): 587-593 JUN 1999
           Hoshikawa H, Koyama K
109_2.     A new eddy current probe using uniform rotating eddy currents
           MATERIALS EVALUATION 56 (1): 85-89 JAN 1998


110.     Rajagopalan, C., Baldev Raj, Kalyanasudaram, P.,
         A soft-computing framework for fault diagnosis
         Information Sciences, Aug. 2000, Vol.127 ( 3-4 ), Pages 87-100

         Times Cited (without self citation): 2+                                Times Cited:   3

110_1      S Palanisamy
           Ultrasonic Inspection of Gas Porosity defects in Aluminium Die Castings, A thesis
           submitted to the Industrial Research Institute Swinburne, Swinburne, Univ. of Tech. in
           fulfillment of the requirements to the degree of Doctor of Philosophy, Hawthorn,
           Melbourne, Australia, July 2006
110_2      Z Rongzhen, Z Youyun
           Study On Clustering Discretization Scheme To Faults Data Table In Knowledge
           Acquisition Based On Rough Set Theory
           Chinese Journal of Mechanical Engineering, 2005 Vol.41 No.1 P.145-150


111.      Venkatraman B, Baldev Raj, Menaka M
          Online infrared detection of inclusions and lack of penetration during welding
          MATERIALS EVALUATION 63 (9): 933-937 SEP 2005

          Times Cited (without self citation): 2                                  Times Cited:     2

111_1     Mirapeix J, Cobo A, Gonzalez DA, et al.
          Plasma spectroscopy analysis technique based on optimization algorithms and spectral
          synthesis for arc-welding quality assurance
          OPTICS EXPRESS 15 (4): 1884-1897 FEB 19 2007
111_2     Mirapeix J, Cobo A, Jauregui C, et al.
          Fast algorithm for spectral processing with application to on-line welding quality

   Source: Web of Science & Google Scholar (As on 03-03-2009)                          Page 58 of 65
                               Citations of Dr. Baldev Raj
                             Distinguished Scientist & Director, IGCAR

          assurance
          MEASUREMENT SCIENCE & TECHNOLOGY 17 (10): 2623-2629 OCT 2006

112.        Kumar, A.; Jayakumar, T.; Baldev Raj; Ray, K.K.
            Characterization of solutionizing behavior in VT14 titanium alloy using ultrasonic
            velocity and attenuation measurements
            Materials Science And Engineering A-Structural Materials Properties Microstructure and
            Processing
            360 (1-2): 58-64 NOV 15 2003

            Times Cited (without self citation): 1                   Times Cited:    3

112_1.      Liu XB, Takamori S, Osawa Y, et al.
            Diffraction correction in the measurement of ultrasonic attenuation
            Materials Science and Engineering A-Structural Materials Properties Microstructure and
            Processing
            442 (1-2): 527-531 Sp. Iss. SI DEC 20 2006


113.     V. Rajendran, S. Muthu Kumaran, V. Sivasubramanian, T. Jayakumar and Baldev Raj
         Anomalies in ultrasonic velocity and attenuation in Nd0.67Sr0.33MnO3 perovskite
         PHYSICA B-CONDENSED MATTER 336 (3-4): 261-266 AUG 2003

         Times Cited (without self citation): 2                            Times Cited :     2

113_1       Begum AN, Rajendran V, Jayakumar T, et al.
            On-line ultrasonic velocity measurements for characterisation of microstructural
            evaluation during thermal aging of beta-quenched zircaloy-2
            MATERIALS CHARACTERIZATION 58 (6): 563-570 JUN 2007
113_2.      Reddy YS, Kumar VP, Kistaiah P, et al.
            Ultrasonic studies on colossal magnetoresistive Nd(0.67)A(0.33)MnO(3) (A= Ca, Sr)
            JOURNAL OF ALLOYS AND COMPOUNDS 424 (1-2): 46-50 NOV 9 2006

114.    Venugopal S, Baldev Raj
        A holistic approach to thermomechanical processing of alloys
        Sadhana-Academy Proceedings in Engineering Sciences 28: 833-857 Part 3-4 Jun-Aug 2003

        Times Cited (without self citation): 2                           Times Cited:    2

114_1.      Venugopal S, Sivaprasad PV, Mannan SL
            Optimisation of workability and control of microstructure during deformation processing
            of various grades of austenitic stainless steels - An overview
            Transactions of The Indian Institute Of Metals 58 (1): 1-17 FEB 2005
114_2.      Venugopal S, Sivaprasad PV
            A journey with Prasad's processing maps
            Journal Of Materials Engineering And Performance 12 (6): 674-686 DEC 2003

115.     Albert, SK; Das, CR; Ramasubbu, V; Bhaduri, AK; Ray, SK; Baldev Raj;
         In situ repair welding of steam turbine shroud for replacing a cracked blade
         Journal of Materials Engineering and Performance, 11 (3): 243-249 JUN 2002

         Times Cited (without self citation): 2                                Times Cited:      2

115_1.      Das CR, Ramasubbu V, Bhaduri AK, Ray, S.K
            Repair welding of cracked turbine shroud using matching composition consumables
            Science and Technology of Welding and Joining 10 (1): 110-112 2005
115_2.      Bhaduri AK, Albert SK, Ray SK, Rodriguez, P
            Recent trends in repair and refurbishing of steam turbine components
            Sadhana-Academy Proceedings in Engineering Sciences 28: 395-408 Part 3-4 JUN-AUG
            2003



   Source: Web of Science & Google Scholar (As on 03-03-2009)                       Page 59 of 65
                               Citations of Dr. Baldev Raj
                             Distinguished Scientist & Director, IGCAR


116.        R. Ramesh, C.K. Mukhopadhyay, T. Jayakumar and Baldev Raj
            Characterization of acoustic emission generated during electrochemical charging and
            discharging of hydrogen in palladium
            SCRIPTA MATERIALIA 38 (4): 661-665 JAN 13 1998

            Times Cited (without self citation): 2                                Times Cited :     2

116_1.      Inoue H, Tsuzuki R, Nohara S, Iwakura, C
            Characterization of initial activation behavior for hydrogen storage alloys by acoustic
            emission technique
            JOURNAL OF ALLOYS AND COMPOUNDS 446: 681-686 Sp. Iss. SI OCT 31 2007
116_2.      Inoue H, Tsuzuki R, Nohara S, Iwakura, C
            In situ monitoring of hydrogen storage alloy negative electrode during charging by an
            acoustic emission technique
            ELECTROCHEMICAL AND SOLID STATE LETTERS 9 (11): A504-A506 2006

117.        Materials development and corrosion problems in nuclear fuel reprocessing plants
            Raj B, Mudali UK
            Progress in Nuclear Energy, 48 (4): 283-313 2006

            Times Cited (without self citation): 1                  Times Cited:     2

117_1.      Mallika C, Keerthika B, Mudali UK
            Platinum-modified titanium anodes for the electrolytic destruction of nitric acid
            Electrochimica Acta 52 (24): 6656-6664 AUG 1 2007


118.        A review of the application of acoustic emission techniques for monitoring forming and
            grinding processes
            Jayakumar, T;Mukhopadhyay, CK;Venugopal, S;Mannan, SL;Baldev Raj;
            Journal of Materials Processing Technology
            159 (1): 48-61 JAN 10 2005

            Times Cited (without self citation): 1                 Times Cited:     2

118_1       Prabakar K, Rao SPM
            Pattern recognition analysis of acoustic emission signals propagated through a
            waveguide - A simulation study
            Indian Journal of Pure & Applied Physics 45 (1): 900-905 NOV 2007

119.        Sizing of cracks embedded in sub-cladding using the ultrasonic synthetic aperture
            focusing technique (SAFT)
            Sony Baby; Balasubramanian, T; Pardikar, RJ; Jayakumar, T; Rajkumar, KV; Baldev
            Raj; INSIGHT, 46 (1): 26-30 JAN 2004

            Times Cited (without self citation): 1     (-)           Times Cited:       2

119_1       Baskaran G, Balasubramaniam K, Rao CL
            Shear-wave time of flight diffraction (S-TOFD) technique
            NDT & E INTERNATIONAL 39 (6): 458-467 SEP 2006


120.    BALDEV RAJ, BHATTACHARYA DK, RODRIGUEZ P
        Development of In-Service Inspection Techniques for Nuclear-Power-Plants in India
        International Journal Of Pressure Vessels And Piping 56 (2): 183-211 1993

        Times Cited (without self citation): 2

120_1      Wang G, Ma P, Li Y, et al.
           The mobile robot for outer surface inspection of boiler tubes
           INTERNATIONAL JOURNAL OF ROBOTICS & AUTOMATION 19 (1): 36-41 2004
120_2      Li YM, Ma PS, Qin CJ, et al.
           A novel mobile robot for finned tubes inspection

   Source: Web of Science & Google Scholar (As on 03-03-2009)                            Page 60 of 65
                               Citations of Dr. Baldev Raj
                             Distinguished Scientist & Director, IGCAR

           ROBOTICA 21: 691-695 Part 6 NOV-DEC 2003

121.    PALANICHAMY P, SUBRAMANIAN CV, BALDEV RAJ
        COUPLANT CORRECTION FOR ULTRASONIC MEASUREMENTS
        BRITISH JOURNAL OF NON-DESTRUCTIVE TESTING 31 (2): 78-81 FEB 1989

        Times Cited (without self citation): 2

121_1.     Bindal VN
           Water-based couplants for general purpose use for ultrasonic NDT applications
           JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH 59 (11): 935-939 NOV 2000
121_2.     MAK DK
           Ultrasonic Phase-Velocity Measurement Incorporating Couplant Correction
           British Journal Of Non-Destructive Testing 35 (8): 443-449 AUG 1993

122.        Banerjee, S.,Judy Gopal, Muraleedharan, P., Tyagi, A.K., Baldev Raj
            Research Communications: Physics and Chemistry of photocatalytic of titanium
            dioxide: Visualisation of bacterial activity using atomic force microscopy, Current
            Science, Vol.90(10), 2006

            Times Cited (without self citation): 1

122_1       Nadanathangam Vigneshwaran, Sampath Kumar, A.a. Kathe, P.V. Varadarajan and
            Virendra Prasad
            Functional finishing of cotton fabrics using Zinc Oxide-soluble starch nano-composites,
            Institute of Physics Publishing, Nanotechnology 17, 2006, 5087-5095.

123.        Baldev Raj, P. Kalyanasundaram, T. Jayakumar, C. Babu Rao, B. Venkataraman, U.
            Kamachi Mudali, A. Joseph, Anish Kumar and K.V. Rajkumar
            Nondestructive evaluation of the Delhi iron pillar
            CURRENT SCIENCE 88 (12): 1948-1956 JUN 25 2005

            Times Cited (without self citation): 1

123_1       Potts PJ, Ellis AT, Kregsamer P, et al.
            Atomic spectrometry update - X-ray fluorescence spectrometry
            JOURNAL OF ANALYTICAL ATOMIC SPECTROMETRY 21 (10): 1076-1107 2006


124.       Raj B, Kamath HS, Natarajan R, et al.
           A perspective on fast reactor fuel cycle in India, Progress in Nuclear Energy
           47 (1-4)369-379 2005

           Times Cited (without self citation): 1

124_1.     Shankar AR, Babu BJ, Sole R, Mudali UK, Khatak HS
           Laser remelting of plasma sprayed zirconia based ceramic coating for pyrochemical
           reprocessing applications
           SURFACE ENGINEERING 23 (2): 147-154 MAR 2007

125.        Chaswal V, Sasikala G, Ray SK, Mannan S L and Baldev Raj
            Fatigue crack growth mechanism in aged 9Cr-1Mo steel: threshold and Paris regimes
            Materials Science And Engineering A-Structural Materials Properties Microstructure And
            Processing 395 (1-2): 251-264 MAR 25 2005

            Times Cited (without self citation): 1

125_1       Yi Y, Lee B, Kim S, et al.
            Corrosion and corrosion fatigue behaviors of 9cr steel in a supercritical water condition
            Materials Science And Engineering A-Structural Materials Properties Microstructure And
            Processing 429 (1-2): 161-168 AUG 15 2006

126.      Venkataraman B, Mukhopadhyay CK, Baldev Raj
          Effect of variation of strain rate on thermal and acoustic emission during tensile
          deformation of nuclear grade AISI type 316 stainless steel

   Source: Web of Science & Google Scholar (As on 03-03-2009)                         Page 61 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

           MATERIALS SCIENCE AND TECHNOLOGY 20 (10): 1310-1316 OCT 2004

           Times Cited (without self citation): 1

126_1.       Mukherjee M, Mohanty ON, Hashimoto S, et al.
             Acoustic emission technique to study the effect of strain rate on the deformation
             behaviour of TRIP aided steels with different matrix microstructures
             ISIJ INTERNATIONAL 46 (8): 1241-1250 2006


127.     John Philip, T. Jayakumar, P. Kalyanasundaram and Baldev Raj
         A tunable optical filter
         MEASUREMENT SCIENCE & TECHNOLOGY 14 (8): 1289-1294 AUG 2003

         Times Cited (without self citation): 1


127_1.       Rosenberg M, Sheehan DP, Shukla PK
             A note on the use of dust plasma crystals as tunable THz filters
             IEEE TRANSACTIONS ON PLASMA SCIENCE 34 (2): 490-493 Part 3 APR 2006

128.     Baldev Raj, U. Kamachi Mudali, M.Vasudevan and P. Shankar
         Current status of AISI types 304 LN and 316 LN austenitic stainless steels
         Transactions of The Indian Institute of Metals 55 (4): 131-147 AUG 2002
         Times Cited (without self citation): 1

128_1.        Huynh MHV, Hiskey MA, Chavez DE, et al.
              Synthesis, characterization, and energetic properties of diazido heteroaromatic high-
              nitrogen C-N compound
              Journal Of The American Chemical Society 127 (36): 12537-12543 SEP 14 2005

129.      B.P.C. Rao, Baldev Raj, T. Jayakumar and P. Kalyanasundaram,
          Using artificial neural networks to quantify discontinuities in eddy current testing
          MATERIALS EVALUATION 60 (1): 84-88 JAN 2002
          Times Cited (without self citation): 1

129_1.       De Mesquita RN, Ting DKS, Cabral ELL, et al.
             Classification of steam generator tube defects for real-time applications using eddy
             current test data and self-organizing maps
             REAL-TIME SYSTEMS 27 (1): 49-70 MAY 2004

130.     Baldev Raj, P Palanichamy, T Jayakumar
         Science and technology of non-destructive testing, evaluation and characterization,
         Insight - Non-Destructive Testing and Condition Monitoring, Vol.45(1), January 2003,
         pp15-30, ISSN: 1354-2575

         Times Cited (without self citation): 1

130_1.       R Sandström, P Langenberg, H Sieurin
             New brittle fracture model for the European pressure vessel standard,
             Intl. Jnl. of Pressure Vessels and Piping, Vol.81, Issues 10-11, November 2004, Pages
             837-845

131.         Mukhopadhyay, CK; Jayakumar, T; Baldev Raj; Ray, KK;
             Acoustic emission-stress intensity factor relations for tensile deformation of notched
             specimens of AISI type 304 stainless steel
             Materials Science and Engineering A-Structural Materials Properties Microstructure and
             Processing, 293 (1-2): 137-145 NOV 30 2000

             Times Cited (without self citation): 1                     Times Cited :    1

131_1.       Park JH
             Formation mechanism of spinel-type inclusions in high-alloyed stainless steel melts
             Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing


   Source: Web of Science & Google Scholar (As on 03-03-2009)                           Page 62 of 65
                               Citations of Dr. Baldev Raj
                             Distinguished Scientist & Director, IGCAR

            Science 38 (4): 657-663 AUG 2007


132.        NDE methodologies for characterisation of defects, stresses and microstructures in
            pressure vessels and pipes
            Raj B, Jayakumar T
            International Journal of Pressure Vessels and Piping
            73 (2): 133-146 SEP 1997

            Times Cited (without self citation): 1               Times Cited :   2

132_1.      Cheng WY, Nagahigashi S, Shiwa M, et al.
            Investigation of the micro-structural dependence of the magnetic properties of SQV2A
            steel for NDE
            International Journal of Applied Electromagnetics And Mechanics 25 (1-4): 145-149
            2007

133.    Jha BB, Khanna AS, Baldev Raj
        Study Of The Oxidation Behavior Of 9 Cr-1 Mo Steel Using The Acoustic-Emission
        Technique, JOURNAL OF MATERIALS SCIENCE 22 (8): 2823-2827 AUG 1987

        Times Cited (without self citation): 1                             Times Cited:     3

133_1.     SAUNDERS SRJ, NAGL MM, SCHUTZE M
           Measurement Methods For The Determination Of Fracture Strain
           MATERIALS AT HIGH TEMPERATURES 12 (2-3): 103-109 1994

134.    V. Moorthy, S. Vaidyanathan, T. Jayakumar and Baldev Raj
        Evaluation of post-weld heat treatment in 2.25Cr-1Mo steel tube to tube sheet welded joints
        using magnetic Barkhausen noise measurements
        MATERIALS SCIENCE AND TECHNOLOGY 13 (7): 614-617 JUL 1997

        Times Cited (without self citation): 1                  Times Cited :    3

134_1.    Singh M
          Developments in instrumentation and automation for NDE applications: in-house
          experience in the Department of Atomic Energy
          INSIGHT 45 (1): 73-86 JAN 2003

135.     S. Murugan, P.V. Kumar, T.P.S. Gill, Baldev Raj and M.S.C. Bose
         Numerical modelling and experimental determination of temperature distribution during
         manual metal arc welding
         SCIENCE AND TECHNOLOGY OF WELDING AND JOINING 4 (6): 357-364 1999

         Times Cited (without self citation): 1

135_1    Tusek J, Tomc J, Radkovic M
         New approach to determination of maximum temperatures in welding using travelling
         heat sources
         SCIENCE AND TECHNOLOGY OF WELDING AND JOINING 7 (1): 42-46 FEB 2002

136.      Singal KK, Singh B, Baldev Raj
          Cycloaddition reactions of N-sulphinylanilines and N-(alpha-cyano-alpha-aryl)-
          methylanilines
          SYNTHETIC COMMUNICATIONS 29 (6): 911-915 1999

          Times Cited (without self citation): 1

136_1     Clerici F
          Thiazole and thiadiazole S-oxides
          ADVANCES IN HETEROCYCLIC CHEMISTRY 83: 71-115 2002




   Source: Web of Science & Google Scholar (As on 03-03-2009)                        Page 63 of 65
                                Citations of Dr. Baldev Raj
                              Distinguished Scientist & Director, IGCAR

137.    MOORTHY V, JAYAKUMAR T, BALDEV RAJ
        Acoustic-Emission During Pre-Yield Deformation in Solution Annealed And Cold-Rolled Aisi-
        Type-316 Austenitic Stainless-Steel
        TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS 48 (5): 383-387 OCT 1995

        Times Cited (without self citation): 1

137_1     Cakir A, Tuncell S, Aydin A
          AE response of 316L SS during SSR test under potentiostatic control
          CORROSION SCIENCE 41 (6): 1175-1183 JUN 1999


138.     B. Venkataraman, C. Babu Rao, D.K. Bhattacharya and Baldev Raj
         Radiography Of Medieval Investment-Cast Idols Of India
         BRITISH JOURNAL OF NON-DESTRUCTIVE TESTING 35 (10): 557-561 OCT 1993

         Times Cited (without self citation): 1

138_1.       Balasubramaniam R
             Mixed potential theory analysis of the corrosion resistance of Delhi iron pillar
             Transactions Of The Indian Institute Of Metals 50 (1): 23-35 FEB 1997


139.     KANMANI S, RAO CB, BALDEV RAJ
         On the Computation of the Minkowski dimension using Morphological Operations
         JOURNAL OF MICROSCOPY-OXFORD 170: 81-85 Part 1 APR 1993

         Times Cited (without self citation): 1

139_1        Ahammer H, DeVaney TTJ
             The influence of edge detection algorithms on the estimation of the fractal dimension
             of binary digital images
             CHAOS 14 (1): 183-188 MAR 2004


140.      M. Thavasimuthu, C.V. Subramanian, D.K. Bhattacharya and Baldev Raj
          Crack Closure And Ultrasonic Examination - A Few Practical Observations
          British Journal of Non-Destructive Testing 35 (3): 125-128 MAR 1993

          Times Cited (without self citation): 1

140_1        Ditchburn RJ, Burke SK, Scala CM
             NDT of welds: State of the art
             NDT & E INTERNATIONAL 29 (2): 111-117 APR 1996

141.     B.P.C. Rao, T. Jayakumar, D.K. Bhattacharya, Baldev Raj
         Cross–correlation technique for precise ultrasonic velocity measurements, J. Acoust. Soc.
         Ind. XX (1-4), 90 (1992)

         Times Cited (without self citation): 1

141_1.       Rajendran, V. Begum, A. Nishara, Azooz, M.A. El-Batal, F.H.
             Effect of thermal treatment on elastic properties of SiO2–Na2O–CaO–P2O5 glasses for
             biomedical applications
             Materials Letters, Vol.58(1&2), p.211-215, 2004

142.      Rao BPC, Shyamsunder MT, Kalyanasundaram P, Bhattacharya D K and Baldev Raj
          Development Of Eddy-Current Test Techniques For Condition Monitoring Of Pressure Tube
          Calandria Tube Assemblies Of Indian Pressurized Heavy-Water Reactors
          British Journal of Non-Destructive Testing 33 (9): 437-440 SEP 1991

          Times Cited (without self citation): 1


   Source: Web of Science & Google Scholar (As on 03-03-2009)                           Page 64 of 65
                                Citations of Dr. Baldev Raj
                             Distinguished Scientist & Director, IGCAR


142_1.       Bhattacharya DK
             NDT for residual life assessment in Indian industry
             INSIGHT 45 (1): 31-40 JAN 2003

143.      Baldev Raj, Jha, B.B., Khanna, A.S. and Bhattacharya, D.K.
          Acoustic-Emission Studies Towards Better Understanding Of High-Temperature Oxidation
          in Cr-Mo Steels
          International Journal of Pressure Vessels and Piping 45 (3): 301-326 1991

          Times Cited (without self citation): 1

143_1       SCHMUTZLER HJ, GRABKE HJ
            Application Of An Acoustic-Emission Technique To The High-Temperature Oxidation Of
            Fe-Cr-Al Alloys
            OXIDATION OF METALS 39 (1-2): 15-29 FEB 1993

144.      PALANICHAMY P, KALYANASUNDARAM P, Baldev Raj
          Couplant Correction For Ultrasonic Measurements
          British Journal Of Non-Destructive Testing 32 (5): 241-243 MAY 1990

          Times Cited (without self citation): 1

144_1.      MAK DK
            Ultrasonic Phase-Velocity Measurement Incorporating Couplant Correction
            British Journal Of Non-Destructive Testing 35 (8): 443-449 AUG 1993

145.     P. Kalyanasundaram, T. Jayakumar, Baldev Raj, C.R.L. Murthy and A. Krishnan
         Acoustic-Emission Technique for Leak Detection in an End Shield of a Pressurised Heavy-
         Water Reactor
         International Journal of Pressure Vessels And Piping 36 (1): 65-74 1989

         Times Cited (without self citation): 1

145_1      Benz AEG
           Use of acoustic emission techniques for detection of discontinuities
           Materials Evaluation 56 (10): 1215-1222 OCT 1998

146.    T. Jayakumar, Baldev Raj, D.K. Bhattacharya, P. Rodriguez and O. Prabhakar
        Effect Of Heat-Treatment Onc Nimonic Alloy Pe-16 During Tensile Deformation
        Transactions of the Indian Institute of Metals 40 (2): 147-150 APR 1987

        Times Cited (without self citation): 1

146_1       Valsan M, Parameswaran P, Rao KBS, Sandhya R And Mannan S L
            High-Temperature Low-Cycle Fatigue Behavior Of A Nimonic Pe-16 Superalloy
            Correlation With Deformation And Fracture
            Metallurgical Transactions A-Physical Metallurgy and Materials Science 23 (6): 1751-
            1761 JUN 1992




   Source: Web of Science & Google Scholar (As on 03-03-2009)                       Page 65 of 65

								
To top