Get documents about "National Electrical Code® Committee Report on Proposals
Document Sample
National Electrical Code® Committee Report on Proposals
This Report on Proposals is published for public review and comment prior to consideration at the NFPA May
Association Technical Meeting in Anaheim, CA, May 14–18, 2001.
All members and others interested are urged to read this Report and submit their comments on the forms
provided in the Report prior to the end of the comment period which closes October 27, 2000.
Each comment received on or before the closing date of the comment period will be considered and acted
upon by the National Electrical Code Committee. The results of the committee action will be published in
the National Electrical Code® Committee Report on Comments which will be available to all who request it.
Announcement of its availability will be made in NFPA News. Commentors will receive the Report
automatically.
The National Electrical Code® Committee Report on Proposals and the National Electrical Code® Committee Report on
Comments will be presented at the May Association Technical Meeting for action. An amendment to the
National Electrical Code Technical Committee Report will not be considered at the meeting unless it is one
that has been submitted as a proposal before the National Electrical Code Committee prepared its Report on
Proposals or a comment made on the Report and acted upon by the National Electrical Code Committee.
i
Note: An NEC preprint incorporating the proposed changes published in
the ROP is available in electronic form and in print copy per request by
calling Customer Service at 1-800-344-3555. It may also be downloaded
from NFPA’s (and NEC’s) website, www.nfpa.org.
ARTICLE PAGE 362 Metal Wireways and Nonmetallic Wireways.........................627
363 Flat Cable Assemblies: Type FC...........................................635
90 Introduction..................................................................................20 364 Busways......................................................................................639
365 Cablebus....................................................................................641
Chapter 1. General 370 Outlet Device, Pull and Junction Boxes,
Conduit Bodies and Fittings ................................................642
100 Definitions...................................................................................45 373 Cabinets, Cutout Boxes, and Meter
110 Requirements for Electrical Installations..............................66 Socket Enclosures...................................................................655
374 Auxiliary Gutters ......................................................................662
Chapter 2. Wiring Design and Protection 380 Switches......................................................................................663
384 Switchboards and Panelboards .............................................668
200 Use and Identification of Grounded Conductors ..............96
210 Branch Circuits........................................................................108 Chapter 4. Equipment for General Use
215 Feeders.......................................................................................169
220 Branch-Circuit, Feeder, Service Calculations.....................172 400 Flexible Cords and Cables ....................................................676
225 Outside Branch Circuits and Feeders..................................189 402 Fixture Wires ............................................................................693
230 Services.......................................................................................203 410 Lighting Fixtures, Lampholders, Lamps, and
240 Overcurrent Protection...........................................................231 Receptacles..............................................................................695
250 Grounding.................................................................................263 411 Lighting Systems Operating at 30 Volts or Less..................719
280 Surge Arresters..........................................................................338 422 Appliances ................................................................................721
424 Fixed Electric Space-Heating Equipment ...........................728
Chapter 3. Wiring Methods and Materials 426 Fixed Outdoor Electric Deicing and
Snow-Melting Equipment......................................................730
300 Wiring Methods........................................................................340 427 Fixed Electric Heating Equipment
305 Temporary Wiring....................................................................373 for Pipelines and Vessels.......................................................731
310 Conductors for General Wiring............................................382 430 Motors, Motor Circuits, and Controllers ............................732
318 Cable Trays................................................................................418 440 Air-Conditioning and Refrigerating Equipment.................761
320 Open Wiring on Insulators....................................................431 445 Generators.................................................................................765
321 Messenger Supported Wiring.................................................436 450 Transformers and Transformer Vaults................................765
324 Concealed Knob-and-Tube Wiring......................................438 455 Phase Converters ....................................................................768
325 Integrated Gas Spacer Cable..................................................441 460 Capacitors .................................................................................769
326 Medium Voltage Cable: Type MV.......................................445 470 Resistors and Reactors.............................................................770
328 Flat Conductor Cable: Type FCC........................................447 480 Storage Batteries.......................................................................770
330 Mineral-Insulated, Metal-Sheathed Cable...........................451 490 Equipment, Over 600 Volts, Nominal..................................772
331 Electrical Nonmetallic Tubing: Type ENT........................457
333 Armored Cable.........................................................................464
334 Metal-Clad Cable......................................................................469
336 Nonmetallic-Sheathed Cable.................................................476 Chapter 5. Special Occupancies
338 Service-Entrance Cable............................................................499
339 Underground Feeder and Branch-Circuit Cable: 500 Hazardous (Classified) Locations, Class I, II, and III,
Type UF.....................................................................................503 Divisions 1 and 2.......................................................................777
340 Power and Control Tray Cable: Type TC..........................508 501 Class I Locations .....................................................................809
342 Nonmetallic Extensions..........................................................513 502 Class II Locations ....................................................................852
343 Nonmetallic Underground Conduit with Conductors: 503 Class III Locations ..................................................................874
Type NUCC...............................................................................518 504 Intrinsically Safe Systems.........................................................878
345 Intermediate Metal Conduit: Type IMC.............................560 505 Class I, Zone 0, 1, and 2 Locations.......................................884
346 Rigid Metal Conduit: Type RMC.........................................568 511 Commercial Garages, Repair and Storage..........................930
347 Rigid Nonmetallic Conduit: Type RNC ............................577 513 Aircraft Hangars.......................................................................941
348 Electrical Metallic Tubing: Type EMT................................586 514 Gasoline Dispensing and Service Stations...........................951
349 Flexible Metallic Tubing: Type FMT..................................598 515 Bulk Storage Plants...................................................................960
350 Flexible Metal Conduit: Type FMC.....................................602 516 Spray Application, Dipping, and Coating Processes.........969
351 Liquidtight Flexible Metal Conduit: Type LFMC.............606 517 Health Care Facilities..............................................................976
352 Surface Metal Raceways and Surface 518 Places of Assembly...................................................................996
Nonmetallic Raceways...........................................................617 520 Theaters, Audience Areas of Motion Picture and
353 Multioulet Assembly................................................................624 Television Studios, and Similar Locations.......................1003
354 Underfloor Raceways..............................................................625 525 Carnivals, Circuses, Fairs, and Similar Events..................1008
356 Cellular Metal Floor Raceways..............................................626 530 Motion Picture and Television Studios
358 Cellular Concrete Floor Raceways........................................626 and Similar Locations ........................................................1019
540 Motion Picture Projectors....................................................1025
ii
545 Manufactured Building.........................................................1026 830 Network-Powered Broadband Communications
547 Agricultural Buildings...........................................................1027 Systems......................................................................................1333
550 Mobile Homes, Manufactured Homes, and
Mobile Home Parks.............................................................1036 Chapter 9. Tables
551 Recreational Vehicles and Recreational Vehicle Parks..1051
552 Park Trailers............................................................................1061 Tables................................................................................................1348
553 Floating Buildings..................................................................1065 Appendix A......................................................................................1375
555 Marinas and Boatyards..........................................................1066 Appendix B......................................................................................1378
Appendix C......................................................................................1382
Chapter 6. Special Equipment Appendix D......................................................................................1386
Appendix E.......................................................................................1388
600 Electric Signs and Outline Lighting....................................1071
604 Manufactured Wiring Systems..............................................1080
605 Office Furnishings (Consisting of Lighting
Accessories and Wired Partitions)......................................1082
610 Cranes and Hoists..................................................................1082
620 Elevators, Dumbwaiters, Escalators, Moving Walks,
Wheelchair Lifts, and Stairway Chair Lifts......................1085
625 Electric Vehicle Charging System Equipment..................1095
630 Electric Welders......................................................................1096
640 Audio Signal Processing, Amplification, and
Reproduction Equipment....................................................1099
645 Information Technology Equipment ................................1109
650 Pipe Organs............................................................................1117
660 X-Ray Equipment...................................................................1118
665 Induction and Dielectric Heating Equipment.................1118
668 Electrolytic Cells.....................................................................1120
670 Industrial Machinery.............................................................1121
675 Electrically Driven or Controlled Irrigation Machines...1122
680 Swimming Pools, Fountains, and Similar Installations..1124
685 Integrated Electrical Systems................................................1185
690 Solar Photovoltaic Systems...................................................1185
695 Fire Pumps..............................................................................1212
Chapter 7. Special Conditions
700 Emergency Systems................................................................1222
701 Legally Required Standby Systems......................................1228
702 Optional Standby Systems....................................................1231
705 Interconnected Electrical Power Production Sources....1236
710 Over 600 Volts, Nominal—General....................................1238
720 Circuits and Equipment Operating at Less
than 50 Volts...........................................................................1239
725 Class 1, Class 2, and Class 3 Remote-Control, Signaling,
and Power-Limited Circuits ...............................................1240
727 Instrumentation Tray Cable: Type ITC............................1265
760 Fire Alarm Systems ...............................................................1268
770 Optical Fiber Cables and Raceways ..................................1282
780 Closed-Loop and Programmed
Power Distribution .............................................................1293
Chapter 8. Communications Systems
800 Communications Circuits ...................................................1293
810 Radio and Television Equipment.......................................1316
820 Community Antenna Television and Radio
Distribution Systems ............................................................1318
iii
Information on NFPA Codes and Standards Development
1) Applicable Regulations. The primary rules governing the processing of NFPA documents (Codes,
Standards, Recommended Practices, and Guides) are the NFPA Regulations Governing Committee Projects
(RGCPs). Other applicable rules include: NFPA Bylaws, NFPA Technical Meeting Convention Rules, NFPA
Guide for the Conduct of Participants in the NFPA Standards Development Process, and the NFPA Regulations
Governing Petitions to the Board of Directors from Decisions of the Standards Council. These Rules and
Regulations are contained in the NFPA Directory. For copies of the Directory contact Codes and
Standards Administration at NFPA Headquarters; these are also available on the NFPA Homepage at
“www.nfpa.org”.
The following is general information on the NFPA process. All participants, however, should refer to the
actual rules and regulations for a full understanding of this process and for the criteria that governs
participation.
2) Technical Committee Report. The Technical Committee Report (TCR). The TCR is defined as “the
Report of the Technical Committee and Technical Correlating Committee (if any) consisting of the
Report on Proposals (ROP), as modified by the Report on Comments (ROC) published by the
Association” (see 1-4 of RGCPs).
3) Report on Proposals (ROP). The ROP is defined as “a report to the Association on the actions taken
by Technical Committees and/or Technical Correlating Committees, accompanied by a ballot statement
and one or more proposals on text for a new Document or to amend an existing Document” (see 1-4 of
RGCPs). The ROP and the ROC together comprise the Technical Committee Report.
4) Report on Comments (ROC). The ROC is defined as “a report to the Association on the actions taken
by Technical Committees and/or Technical Correlating Committees accompanied by a ballot statement
and one or more comments resulting from public review of the Report on Proposals (ROP) “ (see 1-4 of
RGCPs). The ROP and the ROC together comprise the Technical Committee Report.
5) Association Amendments. The Technical Committee Reports, consisting of the ROP and ROC, will be
presented at a May or November Association Technical Meeting for action. Amending motions made to
the Technical Committee Reports may only be made at the Association Technical Meeting in accordance
with 4-5 and other applicable sections of the RGCPs.
6) Council Appeals. Anyone can appeal to the Standards Council concerning procedural or substantive
matters related to the development, content, or issuance of any Document of the Association or on
matters within the purview of the authority of the Council, as established by the Bylaws and as determined
by the Board of Directors. Such appeals shall be in written form and filed with the Secretary of the
Standards Council (see 1-6 of RGCPs). Time constraints for filing an appeal shall be in accordance with
1-6.1 of the RGCPs.
7) Document Issuance. The Standards Council is the issuer of all documents (see 8.1(a) of Bylaws). The
Council acts on the issuance of a Document within sixty days from the date of the recommendation from
the Association Technical Meeting, unless this period is extended by the Council (see 4-7 of RGCPs).
8) Petitions to the Board of Directors. The Standards Council has been delegated the responsibility for
the administration of the codes and standards development process and the issuance of documents.
However, where extraordinary circumstances requiring the intervention of the Board of Directors exist,
the Board of Directors may take any action necessary to fulfill its obligations to preserve the integrity of the
codes and standards development process and to protect the interests of the Association. The rules for
petitioning the Board of Directors can be found in the Regulations Governing Petitions to the Board of
Directors from Decisions of the Standards Council and in 1-7 of the RGCPs.
9) Public Notice. The program for the Association Technical Meeting should be consulted for the exact
date when each report will be presented for action. Copies of the meeting program are available from
NFPA. Copies of the ROP and ROC, as well as any applicable regulations, are available from NFPA, and
can also be reviewed on the NFPA Homepage at “www.nfpa.org”.
Report of the Committee on David L. Hittinger, IEC of Greater Cincinnati, OH [IM]
Rep. Independent Electrical Contractors
NATIONAL ELECTRICAL CODE Don B. Ivory, Idaho Electrical JATC, ID [L]
Rep. International Brotherhood of Electrical Workers
Technical Correlating Committee Antonio Macias, AMERICO AC, DF [U]
Lyman L. Parks, PA [UT]
Rep. Alliance for Telecommunications Industry Solutions
D. Harold Ware, Chair [IM] Ralph C. Prichard, Hercules, Inc., DE [U]
Libra Electric Co., OK Rep. Chemical Manufacturers Association
Rep. National Electrical Contractors Association H. Brooke Stauffer, Nat’l. Electrical Contractors Assn., MD
[IM]
Mark W. Earley, Secretary Rep. National Electrical Contractors Association
National Fire Protection Assn., MA John W. Troglia, Edison Electric Institute, WI [UT]
(nonvoting) Rep. Edison Electric Institute
Merton W. Bunker, Jr., Assistant Secretary Alternates
National Fire Protection Assn., MA
(nonvoting) David P. Brown, Baltimore Gas & Electric Co., MD [UT]
Rep. Edison Electric Institute
Jean A. O'Connor, Recording Secretary (Alt. to J. W. Troglia)
National Fire Protection Assn., MA Timothy Lee Emory, Emory Electric, Inc., NC [IM]
(nonvoting) Rep. Independent Electrical Contractors
(Alt. to D. L. Hittinger)
Richard Berman, Underwriters Laboratories Inc., IL [RT] Russell J. Helmick, Jr., City of Irvine, CA [E]
James E. Brunssen, Telcordia Technologies, Inc., NJ [UT] Rep. International Association of Electrical Inspectors
Rep. Alliance for Telecommunications Industry Solutions (Alt. to P. H. Cox)
Michael I. Callanan, Nat'l. Joint Apprentice & Training Mahbub Hoque, Telcordia Technologies, NJ [UT]
Committee, PA [L] (Alt. to L. L. Parks)
Rep. International Brotherhood of Electrical Workers Donald H. McCullough, II, Westinghouse Savannah River Co.,
Philip H. Cox, Int'l. Association of Electrical Inspectors, TX SC [U]
[E] Rep. Institute of Electrical & Electronics Engineers, Inc.
Rep. International Association of Electrical Inspectors (Alt. to H. L. Floyd, II)
William R. Drake, Marinco, CA [M] Larry Miller, Nat'l. Electrical Manufacturers Assn., VA [M]
Antonio Macias, AMERICO AC DF [U] Rep. National Electrical Manufacturers Association
James T. Pauley, Square D Co., KY [M] (Alt. to J. D. Minick)
Rep. National Electrical Manufacturers Association Ricky L. Oakland, IBEW, WY [L]
Joseph E. Pipkin, U.S. Dept. of Labor OSHA, DC [E] (Alt. to D. B. Ivory)
John W. Troglia, Edison Electric Institute, WI [UT]
Rep. Edison Electric Institute Nonvoting
Craig M. Wellman, DuPont Engineering, DE [U]
Rep. Chemical Manufacturers Association William Wusinich, U.S. Dept of Labor, PA [E]
Alternates
PANEL NO. 2
Jeffrey Boksiner, Telcordia Technologies, Inc., NJ [UT]
Rep. Alliance for Telecommunications Articles 210, 215, 220, Chapter 9, Appendix D Examples 1
(Alt. to J. E. Brunssen) through 6
David P. Brown, Baltimore Gas & Electric Co., MD [UT]
Rep. Edison Electric Institute James W. Carpenter, Chair
(Alt. to J. W. Troglia) North Carolina Dept. of Insurance, NC [E]
James M. Daly, BICC General, NY [M] Rep. International Association of Electrical Inspectors
Rep. National Electrical Manufacturers Association
(Alt. to J. T. Pauley) Richard W. Becker, Engineered Electrical Systems, Inc., WA
John R. Kovacik, Underwriters Laboratories, IL [RT] [U]
(Alt. to R. Berman) Rep. Institute of Electrical & Electronics Engineers, Inc.
Edward C. Lawry, WI [E] Lawrence Brown, Nat'l. Association of Home Builders
Rep. International Association of Electrical Inspectors (NAHB), DC [IM]
(Alt. to P. H. Cox) Rep. National Association of Home Builders
William M. Lewis, Eli Lilly & Co., IN [U] Thomas L. Harman, University of Houston , TX [SE]
Rep. Chemical Manufacturers Association Bernard Mericle, IBEW, Local Union 236, NY [L]
(Alt. to C. M. Wellman) Rep. International Brotherhood of Electrical Workers
Robert E. Moore, TECO Energy, FL [UT]
Nonvoting Rep. Edison Electric Institute
Donald A. Nissen, Underwriters Laboratories, Inc., IL [RT]
Richard G. Biermann, Biermann Electric Co. Inc., IA James T. Pauley, Square D Co., KY [M]
Rep. National Electrical Manufacturers Association
Joseph Patterson Roché, Celanese Acetate, SC [U]
Rep. Chemical Manufacturers Association
PANEL NO. 1 Albert F. Sidhom, U.S. Army Corps of Engineers, CA [U]
Michael D. Toman, MEGA Power Electrical Services, Inc., MD
Articles 90, 100, 110 [IM]
Rep. National Electrical Contractors Association
John D. Minick, Chair Robert G. Wilkinson, Independent Electrical Contractors of
Nat'l. Electrical Manufacturers Assn., TX [M] Houston, Inc., TX [IM]
Rep. National Electrical Manufacturers Association Rep. Independent Electrical Contractors
Michael A. Anthony, University of Michigan, MI [U] Alternates
Rep. The Association of Higher Education Facilities Officers
Philip H. Cox, Int'l. Association of Electrical Inspectors, TX Ernest S. Broome, City of Knoxville, TN [E]
[E] Rep. International Association of Electrical Inspectors
Rep. International Association of Electrical Inspectors (Alt. to J. W. Carpenter)
David A. Dini, Underwriters Laboratories Inc, IL [RT] Charles G. Crawford, TXU Electric, TX [UT]
William T. Fiske, Intertek Testing Services N.A. Inc., NY [RT] Rep. Edison Electric Institute
H. Landis Floyd, II, The DuPont Company, DE [U] (Alt. to R. E. Moore)
Rep. Institute of Electrical & Electronics Engineers, Inc
ix
Ernie Howell, IEC, Rocky Mountain Chapter, CO [IM] Robert H. Wills, Advanced Energy Systems Inc., NH [U]
Rep. Independent Electrical Contractors Rep. Solar Energy Industries Association
(Alt. to R. G. Wilkinson) (VL 690)
James R. Jones, University of Alabama at Birmingham, AL (Alt. to W. I. Bower)
[U]
Rep. Institute of Electrical & Electronics Engineers, Inc.
(Alt. to R. W. Becker) PANEL NO. 4
Daniel J. Kissane, Pass & Seymour/legrand, NY [M]
Rep. National Electrical Manufacturers Association Articles 225, 230
(Alt. to J. T. Pauley)
Charles D. Marshall, Jr., IBEW Local 948, MI [L] C. John Beck, Chair [UT]
Rep. International Brotherhood of Electrical Workers Pacific Gas and Electric Co., CA
(Alt. to B. Mericle) Rep. Edison Electric Institute
Susan W. Porter, Underwriters Laboratories Inc., NY [RT]
(Alt. to D. A. Nissen) Malcolm Allison, Ferraz Shawmut, MA [M]
J. Morris Trimmer, University of Florida, FL [SE] K. W. Carrick, Electrical Engineering Professional Services,
(Alt. to T. L. Harman) Inc., MS [U]
Joseph E. Wiehagen, Nat'l. Assn. of Home Builders, MD Rep. Institute of Electrical & Electronics Engineers, Inc.
[IM] Floyd C. Ferris, New York Board of Fire Underwriters, NY
Rep. National Association of Home Builders [E]
(Alt. to L. Brown) Howard D. Hughes, Hughes Electric Co. Inc., AR [IM]
Rep. National Electrical Contractors Association
William M. Lewis, Eli Lilly & Co., IN [U]
PANEL NO. 3 Rep. Chemical Manufacturers Association
Junior L. Owings, State of Oregon, OR [E]
Articles 300, 305, 690 Rep. International Association of Electrical Inspectors
Robert J. Pollock, Underwriters Laboratories Inc., IL, RT
Raymond W. Weber, Chair Mark H. Sumrall, IBEW Local 527, TX [L]
Dept. of Commerce, WI [E] Rep. International Brotherhood of Electrical Workers
Rep. International Association of Electrical Inspectors John W. Young, Siemens Energy & Automation, Inc., GA [M]
Rep. National Electrical Manufacturers Association
Joseph J. Andrews, Electrical Safety Resources, Inc., SC [U] Vincent Zinnante, Advantage Electric, Inc., TX [IM]
Rep. Institute of Electrical & Electronics Engineers, Inc. Rep. Independent Electrical Contractors
Charles W. Beile, Allied Tube & Conduit/Tyco, IL [M]
Rep. National Electrical Manufacturers Association Alternates
Ward I. Bower, Sandia Nat'l. Laboratories, NM [U]
Rep. Solar Energy Industries Association Thomas L. Adams, Commonwealth Edison, IL [UT]
(VL 690) Rep. Edison Electric Institute
Paul Casparro, Scranton Electricians JATC, PA [L] (Alt to C. J. Beck)
Rep. International Brotherhood of Electrical Workers Terry D. Cole, Hamer Electric/ Associated Electrical
Charles W. Forsberg, OH [M] Consultants, Inc., WA [IM]
Rep. Society of the Plastics Industry Inc. Rep. Independent Electrical Contractors
Jack A. Gruber, Wheatland Tube Co., PA [M] (Alt. to V. Zinnante)
Rep. American Iron and Steel Institute Dennis Darling, Ayres, Lewis, Norris, & May, Inc., MI [U]
Dennis B. Horman, PacifiCorp, UT [UT] Rep. Institute of Electrical & Electronics Engineers, Inc.
Rep. Edison Electric Institute Alt. to K. W. Carrick
George M. Kreiner, Underwriters Laboratories Inc., IL [RT] Timothy Owens, City of San diego, CA [E]
Ronald E. Maassen, Lemberg Electric Co., Inc., WI [IM] Rep. International Association of Electrical Inspectors
Rep. National Electrical Contractors Association (Alt. to J. L. Owings)
Steven J. Owen, AL [IM] Philip M. Piqueira, General Electric Co., CT [M]
Rep. Associated Builders and Contractors, Inc. Rep. National Electrical Manufacturers Association
David A. Pace, Olin Corporation, AL [U] (Alt to J. W. Young)
Rep. Chemical Manufacturers Association John A. Sigmund, PPG Industries, Inc., LA [U]
Rep. Chemical Manufacturers Association
Alternates (Alt. to W. M. Lewis)
William J. Tipton, IBEW, OH [L]
Martin J. Brett, Jr., Wheatland Tube Co., NJ [M] Rep. International Brotherhood of Electrical Workers
Rep. American Iron and Steel Institute (Alt. to M. H. Sumrall)
(Alt. to J. A. Gruber)
James D. Erwin, Celanese, Ltd., TX [U]
Rep. Chemical Manufacturers Association PANEL NO. 5
(Alt. to D. A. Pace)
Palmer L. Hickman, Williard Inc., PA [L] Articles 200, 250, 280, Appendix E
Rep. International Brotherhood of Electrical Workers
(Alt. to P. Casparro) Ronald J. Toomer, Chair [IM]
David H. Kendall, Carlon, Lamson & Sessions, OH [M] Toomer Electrical Co. Inc., LA
Rep. Society of the Plastics Industry Inc Rep. National Electrical Contractors Association
(Alt. to C. W. Forsberg)
Mark C. Ode, Underwriters Laboratories, Inc., NC [RT] Jeffrey Boksiner, Telcordia Technologies, Inc., NJ [UT]
(Alt. to G. M. Kreiner) David T. Brender, Copper Development Association, Inc., NY
Richard P. Owen, City of St. Paul, MN [E] [M]
Rep. International Association of Electrical Inspectors Rep. Copper Development Association Inc.
(Alt. to R. W. Weber) Martin J. Brett, Jr., Wheatland Tube Co., NJ [M]
Roger S. Passmore, Davis Electrical Constructors, Inc., SC Rep. American Iron and Steel Institute
[IM] Elio L. Checca, U.S. Dept. of Labor, VA [E]
Rep. Associated Builders and Contractors, Inc. Loren Diaz, Underwriters Laboratories Inc., CA [RT]
(Alt. to S. J. Owen) Paul Dobrowsky, Eastman Kodak Co., NY [U]
George E. Richey, Consumers Energy, MI [UT] Rep. Chemical Manufacturers Association
Rep. Edison Electric Institute Gerald L. Hadeen, Alflex Corp., CA [M]
(Alt. to D. B. Horman) Rep. The Aluminum Association
Ken A. Rogers, Thomas & Betts Corp., TN [M] Dan Hammel, Int'l. Brotherhood of Electrical Workers, IA
Rep. National Electrical Manufacturers Association [L]
(Alt. to C. W. Beile) Rep. International Brotherhood of Electrical Workers
Melvin K. Sanders, Things Electrical Co., Inc. dba (TECo., Michael J. Johnston, Int’l. Association of Electrical Inspectors,
Inc), IA [U] Inc., TX [E]
Rep. Institute of Electrical & Electronics Engineers, Inc Rep. International Association of Electrical Inspectors
(Alt. to J. J. Andrews)
x
Charles F. Mello, Electro-Test, Inc., OR [IM] Rep. Copper Development Association Inc.
Rep. InterNational Electrical Testing Association Inc. (Alt. to J. Zimnoch)
Elliot Rappaport, Electro Technology Consultants, Inc., MI Danny P. Liggett, DuPont Engineering, DE [U]
[U] Rep. Chemical Manufacturers Association
Rep. Institute of Electrical & Electronics Engineers, Inc. (Alt. to D. W. Pettigrew)
Ted G. Robertson, Robertson Electric, Inc., TX, [IM] Lowell S. Lisker, American Insulated Wire Corp., RI [M]
Rep. Independent Electrical Contractors Rep. National Electrical Manufacturers Association
William F. Saffell, MD [M] (Alt. to S. B. Friedman)
Rep. Power Tool Institute, Inc. Harry J. Sassaman, Forest Electric Corp., NJ [IM]
Melvin J. Schiff, M J Schiff & Associates, CA [SE] Rep. National Electrical Contractors Association
Rep. American Water Works Association (Alt. to S. J. Thorwegen, Jr.)
(VL 250) John Stacey, City of St Louis, MO [E]
Gregory J. Steinman, Thomas & Betts Corp., TN [M] Rep. International Association of Electrical Inspectors
Rep. National Electrical Manufacturers Association (Alt. to O. P. Post)
C. Douglas White, Reliant Energy, TX [UT] Fred Truban, American Electric Power, OH [UT]
Rep. Edison Electric Institute Rep. Edison Electric Institute
(Alt. to D. G. Komassa)
Alternates
Martin D. Adams, Adams Electric, Inc., CO [IM] PANEL NO. 7
Rep. National Electrical Contractors Association
(Alt. to R. J. Toomer) Articles 320, 321, 324, 325, 326, 328, 330, 333, 334, 336, 338,
David A. Dini, Underwriters Laboratories Inc, IL [RT] 339, 340, 342, 363
(Alt. to L. R. Diaz)
Timothy Edwards, Alcan Cable Co., GA [M] Thomas E. Trainor, Chair
Rep. The Aluminum Association City of San Diego, CA [E]
(Alt. to G. L. Hadeen) Rep. International Association of Electrical Inspectors
Garfield B. Gwyn, Gwyn Electrical & Plumbing Co., NC [IM]
Rep. Independent Electrical Contractors James M. Daly, BICC General, NY [M]
(Alt. to T. G. Robertson) Rep. National Electrical Manufacturers Association
Ronald Lai, FCI Electrical, NH [M] Brian Ensign, Intertek Testing Services, N.A. Inc., NY [RT]
Rep. National Electrical Manufacturers Association Chris Fahrenthold, MH Technologies, TX [IM]
(Alt. to G. J. Steinman) Rep. Independent Electrical Contractors
Dennis E. Lammert, Ameren Services, MO [UT] Robert L. Gotham, Rose City Electric Co., Inc., OR [IM]
Rep. Edison Electric Institute Rep. National Electrical Contractors Association
(Alt to C. D. White) Thomas J. Guida, Underwriters Laboratories Inc., NY [RT]
Daleep C. Mohla, Union Carbide Corp., TX [U] Ronald G. Nickson, Nat'l. Multi Housing Council, DC [U]
Rep. Institute of Electrical & Electronics Engineers, Inc. Bruce W. Nutt, TU Electric, TX [UT]
(Alt. to E. Rappaport) Rep. Edison Electric Institute
Thomas E. Moore, City of Norton, OH [E] John E. Propst, Equilon Enterprises LLC, TX [U]
Rep. International Association of Electrical Inspectors Rep. Chemical Manufacturers Association
(Alt. to M. J. Johnston) Thomas G. Rodgers, Dickens & Assoc. Inc., FL [L]
David Peot, Ryobi, SC [M] Rep. International Brotherhood of Electrical Workers
Rep. Power Tool Institute, Inc. David E. Schumacher, All County Electric Co., IA [IM]
(Alt. to W. F. Saffell) Rep. Associated Builders and Contractors, Inc
Thomas J. Shea, IBEW Local 405, IA [L] H. R. Stewart, HRS Consulting, TX [U]
Rep. International Brotherhood of Electrical Workers Rep. Institute of Electrical & Electronics Engineers, Inc.
(Alt. to D. Hammel) George A. Straniero, AFC Cable Systems, Inc., NJ [M]
Rep. Copper Development Association Inc.
Robert S. Strength, Product Safety Management Inc., FL [M]
PANEL NO. 6 Rep. Society of the Plastics Industry Inc.
Richard Temblador, Alflex Corporation, CA [M]
Articles 310, 400, 402, Chapter 9 Tables 5 through 9 Rep. The Aluminum Association
Stephen J. Thorwegen, Jr., Chair [IM] Alternates
Fisk Electric Co., TX
Rep. National Electrical Contractors Association Harry C. Brown, IBEW Local #606, FL [L]
Rep. International Brotherhood of Electrical Workers
Julian R. Burns, Burns Electrical Contractors, Inc., NC [IM] (Alt. to T. G. Rodgers)
Rep. Independent Electrical Contractors Arthur Buxbaum, San Diego Building Inspection Dept., CA
William C. Ferrell, IBEW, OH [L] [E]
Rep. International Brotherhood of Electrical Workers Rep. International Association of Electrical Inspectors
Samuel B. Friedman, BICC General, RI [M] (Alt. to T. E. Trainor)
Rep. National Electrical Manufacturers Association James V. Fitzgerald, The Okonite Co., NJ [M]
Steven Galan, Underwriters Laboratories Inc., NY [RT] Rep. National Electrical Manufacturers Association
Ravindra H. Ganatra, Alcan Cable, GA [M] (Alt. to J. M. Daly)
Rep. The Aluminum Association Ravindra H. Ganatra, Alcan Cable, GA [M]
David G. Komassa, Wisconsin Electric Power Co., WI [UT] Rep. The Aluminum Association
Rep. Edison Electric Institute (Alt. to R. Temblador)
L. Bruce McClung, Union Carbide Corp., WV [U] Herman J. Hall, TX [M]
Rep. Institute of Electrical & Electronics Engineers, Inc. Rep. Society of the Plastics Industry Inc.
Dale W. Pettigrew, Cognis Corp., OH [U] (Alt. to R. S. Strength)
Rep. Chemical Manufacturers Association Greg Hall, Better-Way Electric, Inc., CO [IM]
Oran P. Post, City of Cuyahoga Falls, OH [E] Rep. Independent Electrical Contractors
Rep. International Association of Electrical Inspectors (Alt. to C. Fahrenthold)
Joseph Zimnoch, The Okonite Company, NJ [M] John Thomas Thompson, A.B.C. Marathon Electrical Co.,
Rep. Copper Development Association Inc. Inc., AL [IM]
Rep. Associated Builders and Contractors, Inc.
Alternates (Alt. to D. E. Schumacher)
David B. West, Duke Energy Inc., NC [UT]
Kenneth L. Brotherton, IBEW Local # 683, OH [L] Rep. Edison Electric Institute
Rep. International Brotherhood of Electrical Workers (Alt. to B. W. Nutt)
(Alt. to W. C. Ferrell) Thomas H. Wood, Cecil B. Wood Inc., IL [IM]
G. W. "Jerry" Kent , Kent Electric Systems, TX [IM] Rep. National Electrical Contractors Association
Rep. Independent Electrical Contractors (Alt. to R. L. Gotham)
(Alt. to J. R. Burns)
Robert L. Konnik, BICC Brand-Rex, CT [M]
xi
PANEL NO. 8 Dale R. Deming, Am Electric Co. (T&B), MI [M]
Frederic P. Hartwell, Hartwell Electrical Services, MA [SE]
Articles 318, 331, 343, 345, 346, 347, 348, 349, 350, 351, 352, Jeffrey H. Hidaka, Underwriters Laboratories, IL [RT]
353, 354, 356, 358, 362, 365, 374, Robert J. Kaemmerlen, Kaemmerlen Electric Co., MO [IM]
Chapter 9 and Tables 1 through 4, and Appendix C Rep. National Electrical Contractors Association
Thomas J. LeMay, LeMay Electric, Inc., GA [IM]
Kenneth E. Jannot, Chair [UT] Rep. Independent Electrical Contractors
Detroit Edison, MI Anthony Montuori, The New York Board of Fire
Rep. Edison Electric Institute Underwriters,
NY [E]
Richard Berman, Underwriters Laboratories Inc., IL [RT] Rep. International Association of Electrical Inspectors
John S. Corry, Corry Electric Inc., CA [IM] Ronald H. Reed, Square D Company, KY [M]
Rep. Associated Builders and Contractors, Inc. Rep. National Electrical Manufacturers Association
Robert W. Cox, Astra Zeneca, DE [U] Sukanta Sengupta, FMC Corp., NJ [U]
Rep. Chemical Manufacturers Association Rep. Institute of Electrical & Electronics Engineers, Inc.
George R. Dauberger, Thomas & Betts Corporation, TN [M] Paul Welnak, IBEW Local 494, WI [L]
Rep. National Electrical Manufacturers Association Rep. International Brotherhood of Electrical Workers
James Dollins, AFC Cable Systems, MA [M]
Rep. The Aluminum Association Alternates
M. Shan Griffith, Brown & Root, Inc., TX [U]
Rep. Institute of Electrical & Electronics Engineers, Inc. Jeff Bernson, IBEW, IL [L]
David H. Kendall, Carlon, Lamson & Sessions, OH [M] Rep. International Brotherhood of Electrical Workers
Rep. Society of the Plastics Industry Inc. (Alt. to P. Welnak)
Wayne A. Lilly, City of Harrisonburg, VA [E] Donald Offerdahl, ND State Electrical Board, ND [E]
Rep. International Association of Electrical Inspectors Rep. International Association of Electrical Inspectors
W. Terry Lindsay, Duncan Electric Co., Inc. TN [IM] (Alt. to A. Montuori)
Rep. NECA Bradford D. Rupp, Allied Moulded Products, Inc., OH [M]
Richard E. Loyd, R & N Associates, AR [M] Rep. National Electrical Manufacturers Association
Rep. American Iron and Steel Institute Alt. to R. H. Reed
C. Ernest Reynolds, Hatfield-Reynolds Electric Co., AZ [IM] Jerome W. Seigel, FL [U]
Rep. Independent Electrical Contractors Rep. Institute of Electrical & Electronics Engineers, Inc.
Dennis L. Rowe, NY Board of Fire Underwriters, NY [E] (Alt. to S. Sengupta)
Rep. New York Board of Fire Underwriters William R. Stalker, ComEd Division of Unicom, IL [UT]
Ray R. Simpson, Int'l. Brotherhood of Electrical Workers, IN Rep. Edison Electric Institute
[L] (Alt. to T. M. Croushore)
Rep. International Brotherhood of Electrical Workers Michael W. Wedel, Phillips Petroleum Company, TX [U]
Rep. Chemical Manufacturers Association
Alternates (Alt. to B. H. Culp)
Jimmy R. Bonds, Oklahoma State Dept of Health, OK [E]
Rep. International Association of Electrical Inspectors PANEL NO. 10
(Alt. to W. A. Lilly)
Kenneth E. Christ, Solutie, Inc., MO [U] Articles 240, 780
Rep. Chemical Manufacturers Association
[Alt. to R. W. Cox] James T. Dollard, Jr. Chair [L]
Joseph G. Dabe, City of St. Paul, MN [L] IBEW, PA
Rep. International Brotherhood of Electrical Workers Rep. International Brotherhood of Electrical Workers
(Alt. to R. R. Simpson)
Ron Duren, PacifiCorp, WA [UT] Charles K. Blizard, American Electrical Testing Co., Inc., MA
Rep. Edison Electric Institute [IM]
(Alt. to K. E. Jannot) Rep. International Electrical Testing Association Inc.
Charles W. Forsberg, OH [M] Madeline Borthick, MH Technologies, TX [IM]
Rep. Society of the Plastics Industry Inc. Rep. Independent Electrical Contractors
(Alt. to D. H. Kendall) John E. Brezan, Lehigh Valley Electrical Inspection Service,
Jack A. Gruber, Wheatland Tube Co., PA [M] PA [E]
Rep. American Iron and Steel Institute Rep. International Association of Electrical Inspectors
(Alt. to R. E. Loyd) Robert J. Deaton, Union Carbide Corp., TX [U]
Alan Manche, Schneider Electric/Square D Company, KY Rep. Institute of Electrical & Electronics Engineers, Inc.
[M] Charles K. Eldridge, Indianapolis Power & Light Co., IN
Rep. National Electrical Manufacturers Association [UT]
(Alt. to G. R. Dauberger) Rep. Edison Electric Institute
Von Dewayne Stelljes, Jr., Wayne's Electric, Inc., CO [IM] Carl J. Fredericks, The Dow Chemical Co., TX [U]
Rep. Independent Electrical Contractors Rep. Chemical Manufacturers Association
(Alt. to C. E. Reynolds) Don W. Jhonson, Interior Electric, Inc., FL [IM]
Richard Temblador, Alflex Corporation, CA, [M] Rep. National Electrical Contractors Association
Rep. The Aluminum Association Clive W. Kimblin, Cutler-Hammer, Inc., PA [M]
(Alt. to J. Dollins) Rep. National Electrical Manufacturers Association
Ronald J. Toomer, Toomer Electrical Co. Inc., LA [IM] Arden L. Munson, Hussmann Corp., MO [M]
Rep. National Electrical Contractors Association Rep. Air Conditioning and Refrigeration Institute
(Alt to W. T. Lindsay) George J. Ockuly, MO [M]
James Van Den Heuvel, West Electric Inc., WI [IM] John A. Zaplatosch, Underwriters Laboratories Inc., IL [RT]
Rep. Associated Builders and Contractors, Inc.
(Alt. to J. S. Corry) Alternates
William C. Wagner, Underwriters Laboratories, Inc., NY [RT]
(Alt. to R. Berman) David E. Chartrand, Middle Department Inspection Agency,
Inc., NY [E]
Rep. International Association of Electrical Inspectors
PANEL NO. 9 (Alt. to J. E. Brezan)
George D. Gregory, Square D Co., IA [M]
Articles 370, 373, 380, 384 Rep. National Electrical Manufacturers Association
(Alt. to C. W. Kimblin)
Timothy M. Croushore, Chair [UT] Roderic L. Hageman, Prit Service, Inc., IL [IM]
Allegheny Power Service Corp., PA Rep. International Electrical Testing Association Inc.
Rep. Edison Electric Institute (Alt. to C. K. Blizard)
Boyd H. Culp, Phillips Petroleum Co., OK [U]
Rep. Chemical Manufacturers Association
xii
Charles D. Hughes, Westinghouse Savannah River Co., SC Leo H. Haas, Jr., Reliant Energy HLP, TX [UT]
[U] Rep. Edison Electric Institute
Rep. Institute of Electrical & Electronics Engineers, Inc. (Alt. to M. E. Thomas)
(Alt. to R. J. Deaton) Robert J. Keough, U.S. Electrical Motors, MO [M]
Randy Jones, IBEW Local 934, TN [L] Rep. National Electrical Manufacturers Association
Rep. International Brotherhood of Electrical Workers (Alt. to J. R. Wright)
(Alt. to J. T. Dollard, Jr.) George J. Ockuly, MO [M]
Kris Mantravadi, La Roche Industries, LA [U] (Alt. to V. J. Saporita)
Rep. Chemical Manufacturers Association Carl Radcliffe, Underwriters Laboratories Inc., NC [RT]
(Alt. to C. J. Fredericks) (Alt. to R. A. Rasmussen)
Paul J. Notarian, Underwriters Laboratories Inc., NY [RT] John A. Schultz, Minnesota Board of Electricity, MN [E]
(Alt. to J. A. Zaplatosch) Rep. International Association of Electrical Inspectors
Vincent J. Saporita, Cooper Bussmann, MO [M] (Alt. to T. J. Garvey)
(Alt. to G. J. Ockuly) Arthur J. Smith, III, Waldemar S. Nelson and Co., Inc., LA [U]
Steve A. Struble, Freeman's Electric Service, Inc., SD [IM] Rep. Institute of Electrical & Electronics Engineers, Inc.
Rep. Independent Electrical Contractors (Alt. to L. F. Saunders)
(Alt. to M. Borthick)
John Tolbert, Bristol Compressors, VA [M]
Rep. Air Conditioning and Refrigeration Institute PANEL NO. 12
(Alt. to A. L. Munson)
Leslie R. Zielke, South Carolina Electric and Gas Co., SC Articles 426, 427, 610, 620, 625, 630, 645, 660, 665, 668, 669,
[UT] 685, and Appendix D Examples D9 and D10
Rep. Edison Electric Institute
(Alt. to C. K. Eldridge) Charles M. Trout, Chair [IM]
Maron Electric Co., FL
Nonvoting Rep. National Electrical Contractors Association
Rick C. Gilmour, Canadian Standards Assn., ON Thomas M. Burke, Underwriters Laboratories Inc., CA [RT]
Andre R. Cartal, Borough of Princeton, NJ [E]
Rep. International Association of Electrical Inspectors
PANEL NO. 11 James F. Cook, Eagle Electric Manufacturing, NY [M]
Rep. National Electrical Manufacturers Association
Articles 430, 440, 670, Appendix D, Example D8 Ralph E. Droste, United Technologies/Otis Elevator Co., CT
[M]
Thomas H. Wood, Chair Rep. National Elevator Industry Inc.
Cecil B Wood Inc., IL [IM] (VL 610, 620 and 630)
Rep. National Electrical Contractors Association Bill Hanthorn, BICC General Pyrotenax Cables Ltd., ON [M]
Rep. Copper Development Association Inc.
Rick L. Bunch, Tecumseh Products Co., MI [M] Robert A. Jones, Independent Electrical Contractors, TX [IM]
Rep. Air Conditioning and Refrigeration Institute Rep. Independent Electrical Contractors
Louis D. Closson, Intertek Testing Services, N.A. Inc., NY William J. Kelly, Eastman Kodak Co., NY [U]
[RT] Rep. Institute of Electrical & Electronics Engineers, Inc.
Joe David Cox, Eastman Chemical Co., TN [U] Richard H. Laney, Siecor Corp., NC [U]
Rep. Chemical Manufacturers Association John H. Mortimer, Inductotherm Corp., NJ [M]
Thomas J. Garvey, State of Wisconsin, WI [E] (VL 665)
Rep. International Association of Electrical Inspectors C. L. Pittman, Alcoa, Inc., TN [M]
Paul S. Hamer, Chevron Research & Technology Co.. CA Rep. The Aluminum Association
[U] ( VL 427, 610, 625, 630, 645, 646, 660, 665, 668, 669, and 685)
Rep. American Petroleum Institute Norbert Poch, IBM Corp., MN [U]
Michael D. Landolfi, Landolfi Electric Co. Inc., NJ [IM] Rep. Information Technology Industry Council
Rep. Associated Builders and Contractors, Inc. (VL 645)
James M. Naughton, IBEW Local 103, MA [L] Ronald L. Purvis, Georgia Power Co., GA [UT]
Rep. International Brotherhood of Electrical Workers Rep. Edison Electric Institute
Richard A. Rasmussen, Underwriters Laboratories, Inc., NC David R. Quave, Int'l. Brotherhood of Electrical Workers, MS
[RT] [L]
Vincent J. Saporita, Cooper Bussmann, MO [M] Rep. International Brotherhood of Electrical Workers
Lynn F. Saunders, GM Worldwide Facilities Group, MI [U] Robert H. Reuss, Morris Material Handling, LLC, WI [M]
Rep. Institute of Electrical & Electronics Engineers, Inc. (VL 610)
Charles B. Schram, Scottsdale, AZ [SE] T. Neil Thorla, Inland Steel Co., IN [U]
M. Edward Thomas, Alabama Power Co., AL [UT] Rep. Association of Iron & Steel Engineers
Rep. Edison Electric Institute (VL 610, 620, and 630)
Ron Widup, Shermco Industries, Inc., TX [IM] Craig B. Toepfer, Ford Motor Co., MI [U]
Rep. International Electrical Testing Association Inc. Rep. Society of Automotive Engineers
James R. Wright, Siemens-Furnas Controls, IL [M] (VL 625)
Rep. National Electrical Manufacturers Association Kenneth P. White, Olin Corp., NY [U]
Rep. Chemical Manufacturers Association
Alternates Bernard W. Whittington, Whittington Engr. Inc., WV [SE]
Frederick Bried, Equilon Enterprises LLC, TX [U] Alternates
Rep. American Petroleum Institute
(Alt. to P. S. Hamer) Scott Cline, McMurtrey Electric, Inc., CA [IM]
Michael D’Amico, IBEW Local 488, CT [L] Rep. National Electrical Contractors Association
Rep. International Brotherhood of Electrical Workers (Alt. to C. M. Trout)
(Alt. to J. M. Naughton) J. Kevin Curtis, Virginia Power, VA [UT]
Elwood J. Dodge, Magic Aire, TX [M] Rep. Edison Electric Institute
Rep. Air Conditioning and Refrigeration Institute (Alt. to R. L. Purvis)
(Alt. to R. L. Bunch) Jeffrey H. Hidaka, Underwriters Laboratories, IL [RT]
Stanley Folz, Folz Electric, Inc., IL [IM] (Alt. to T. M. Burke)
Rep. National Electrical Contractors Association Robert E. Johnson, Motorola , MA [U]
(Alt. to T. H. Wood) Rep. Information Technology Industry Council
William D. Glover, PPG Industries, Inc., WV [U] (Alt. to N. Poch)
Rep. Chemical Manufacturers Association (VL 645)
(Alt. to J. D. Cox) Mark G. Kosowski, General Motors Advanced Technology, MI
Paul E. Guidry, Fluor Daniel, Inc., TX [IM] [U]
Rep. Associated Builders and Contractors, Inc. Rep. Society of Automotive Engineers
(Alt. to M. D. Landolfi) (Alt. to C. B. Toepfer)
(VL 625)
xiii
Nick Marchitto, Otis Elevator Co., CT [M] Ivan L. Winsett, Ronk Electrical Industries, GA [U]
Rep. National Elevator Industry Inc. Rep. American Society of Agricultural Engineers
(Alt to R. E. Droste) (Alt. to L. E. Stetson)
(VL 610, 620, and 630) Lou G. Willoughby, ALCOA Inc., OH [M]
Harold C. Ohde, Int'l. Brotherhood of Electrical Workers, IL Rep. The Aluminum Association
[L] (Voting Alt. To AA Rep.)
Rep. International Brotherhood of Electrical Workers
(Alt. to D. R. Quave)
Robert C. Oldham, Jr., Reynolds Metals Co., VA [M] PANEL NO. 14
Rep. The Aluminum Association
(Alt. to C. L. Pittman) Articles 500, 501, 502, 503, 504, 505, 510, 511, 513, 514, 515 and
(VL 427, 610, 625, 630, 645, 646, 660, 665, 668, 669, and 685) 516
Merritt D. Redick, M. Redick & Associates, CA [U]
Rep. Institute of Electrical & Electronics Engineers, Inc. Donald R. Cook, Chair
(Alt. to W. J. Kelly) Shelby County Bldg. Inspections, AL [E]
James J. Rogers, Massachusetts St. Board of Electrical Rep. International Association of Electrical Inspectors
Examiners, MA [E]
Rep. International Association of Electrical Inspectors Edward M. Briesch, Underwriters Laboratories Inc., IL [RT]
(Alt. to A. R. Cartal) Kevin P. Earley, Earley Electric, PA [IM]
George S. Tidden, IEC, TX [IM] Rep. Independent Electrical Contractors
Rep. Independent Electrical Contractors Al Engler, Appleton Electric, LLC, IL [M]
(Alt. to R. A. Jones) Rep. International Society for Measurement and Control
Robert C. Turner, Inductotherm Corp., NJ [M] Mark Goodman, ARCO Products Co., CA [U]
(Alt. to J. H. Mortimer) Rep. American Petroleum Institute
(VL 665) Doug Jagunich, Intertek Testing Services, N.A., Inc., MN
[RT]
Joseph H. Kuczka, Killark Electric Mfg. Co., MO [M]
PANEL NO. 13 Rep. National Electrical Manufacturers Association
William G. Lawrence, Jr., FM Global, MA [I]
Articles 450, 455, 460, 470, 490 Mark G. Saban, Saban Electric, IL [IM]
Rep. National Electrical Contractors Association
William T. O'Grady, Chair [RT] Harold B. Smith, Wunderlich-Malec Eng., MN [U]
Underwriters Laboratories Inc., NY Rep. Grain Elevator & Processing Society
Lawrence C. Strachota, Mid American Energy Co., IA [UT]
Tarry L. Baker, Broward County Board of Rules and Appeals, Rep. Edison Electric Institute
FL [E] David Wechsler, Union Carbide Corp., WV [U]
Rep. International Association of Electrical Inspectors Rep. Chemical Manufacturers Association
William A. Brunner, IBEW, ND [L] James A. Weldon, IBEW Local 728, FL [L]
Rep. International Brotherhood of Electrical Workers Rep. International Brotherhood of Electrical Workers
James C. Carroll, Square D Co., TN [M] Donald W. Zipse, Zipse Electrical Engineering Inc., PA [U]
Rep. National Electrical Manufacturers Association Rep. Institute of Electrical & Electronics Engineers, Inc.
William B. Crist, Houston Stafford Electric Company, TX
[IM] Alternates
Rep. Independent Electrical Contractors
O. L. Davis, Manzano Western, Inc., NM [IM] Alonza W. Ballard, Crouse-Hinds , NY [M]
Rep. National Electrical Contractors Association Rep. National Electrical Manufacturers Association
Richard P. Fogarty, Jr., Consolidated Edison Co. of N.Y., Inc., (Alt. to J. H. Kuczka)
NY [UT] James D. Cospolich, Waldemar S. Nelson & Co. Inc., LA
Rep. Edison Electric Institute [U]
Milton D. Robinson, Milt Robinson Engineering Co., IN [U] Rep. Institute of Electrical & Electronics Engineers, Inc.
Rep. Institute of Electrical & Electronics Engineers, Inc. (Alt. to D. W. Zipse)
LaVerne E. Stetson, U.S. Dept. of Agriculture, NE [U] William T. Fiske, Intertek Testing Services N.A.Inc., NY [RT]
Rep. American Society of Agricultural Engineers (Alt. to D. Jagunich)
Ralph H. Young, Eastman Chemical Co., TN [U] Larry E. Fuhrman, City of Titusville, FL [E]
Rep. Chemical Manufacturers Association Rep. International Association of Electrical Inspectors
(Alt. to D. R. Cook)
Alternates Paul T. Kelly, Underwriters Laboratories Inc., IL [RT]
(Alt. to E. M. Briesch)
Douglas Elkins, Exxon Chemical Co., TX [U] Harold C. Kronz, IBEW Local 308, FL [L]
Rep. Chemical Manufacturers Association Rep. International Brotherhood of Electrical Workers
(Alt. to R. H. Young) (Alt. to J. A. Weldon)
Timothy D. Holleman, AC Corp., NC [IM] Michael E. McNeil, FMC Corp/Bio Polymer, ME [U]
Rep. Independent Electrical Contractors Rep. Chemical Manufacturers Association
(Alt. to W. B. Crist) (Alt. to D. Wechsler)
Barry N. Hornberger, PECO Energy Co., PA [UT] Mike O'Meara, Arizona Public Service Co., AZ [UT]
Rep. Edison Electric Institute Rep. Edison Electric Institute
(Alt to R. P. Fogarty, Jr.) (Alt. to L. C. Strachota)
Richard Lofton, IBEW Local 280, OR [L] Peter T. Schimmoeller, FM Global, MA [I]
Rep. International Brotherhood of Electrical Workers (Alt. to W. G. Lawrence, Jr.)
(Alt. to W. A. Brunmer) Ted H. Schnaare, Rosemount Inc., MN [M]
Arthur Mastromarino, Underwriters Laboratories Inc., NY Rep. International Society for Measurement and Control
[RT] (Alt. to A. Engler)
(Alt. to W. T. O'Grady) Francis M. Stone, Jr., Shell Deepwater Development Systems,
Gene Morehart, Acme Electric Corp., NC [M] Inc., LA [U]
Rep. National Electrical Manufacturers Association Rep. American Petroleum Institute
(Alt to J. C. Carroll) (Alt. to M. Goodman)
Robert L. Simpson, Simpson Electrical Engineering Co., GA David L. Vrana, MH Technologies, TX [IM]
[U] Rep. Independent Electrical Contractors
Rep. Institute of Electrical & Electronics Engineers, Inc. (Alt. to K. P. Earley)
(Alt. to M. D. Robinson) Mark C. Wirfs, R & W Engineering Inc., OR [U]
Monte Szendre, Wilson construction Co., OR [IM] Rep. Grain Elevator & Processing Society
Rep. National Electrical Contractors Association (Alt. to H. B. Smith)
(Alt. to O. L. Davis)
Gerald W. Williams, County of Ventura, CA [E] Nonvoting
Rep. International Association of Electrical Inspectors
(Alt. to T. L. Baker) Fred K. Walker, U.S. Air Force, FL [U]
Rep. TC on Airport Facilities
xiv
PANEL NO. 16
PANEL 15
Articles 640, 650, 720, 725, 727, 760, 770, 800, 810, 820, 830,
Articles 445, 480, 518, 520, 525, 530, 540 695, 700, 701, 702, 705 and Chapter 9 Tables 11(a) and (b) and 12 (a) and (b)
Robert C. Duncan, Chair [E] Stanley D. Kahn, Chair [IM]
Reedy Creek Improvement District, FL Tri-City Electric Co., Inc., CA
Rep. International Association of Electrical Inspectors Rep. National Electrical Contractors Association
Peter W. Amos, Consolidated Edison Co. of N.Y., Inc., NY James E. Brunssen, Telcordia Technologies, Inc., NJ [UT]
[UT] Rep. Alliance for Telecommunications Industry Solutions
Rep. Edison Electric Institute Orren E. Cameron, III, United States Dept. of Agriculture, DC
James L. Boyer, Firetrol, Inc., NC [M] [UT]
Rep. National Electrical Manufacturers Association Loren M. Caudill, The DuPont Company, DE [M]
Brian Burrows, IBEW Local 98, PA [L] Rep. Society of the Plastics Industry Inc.
Rep. International Brotherhood of Electrical Workers Gerald Lee Dorna, Belden Wire & Cable, IN [M]
Tom Dunn, Butler Amusements, CA [U] Rep. Insulated Cable Engineers Association Inc.
Rep. Outdoor Amusement Business Association, Inc. S. E. Egesdal, Honeywell International, MN [M]
(VL 525) Rep. NEMA
George W. Flach, Flach Consultants, LA [SE] C. Jeff Goins, Quarry Electric, Inc., FL [IM]
Michael V. Glenn, Longview Fibre Co., WA [U] Rep. Independent Electrical Contractors
Rep. Institute of Electrical & Electronics Engineers, Inc. Roland W. Gubisch, Intertek Testing Services, N.A. Inc., MA
Marcelo M. Hirschler, GBH Int'l., CA [SE] [RT]
George Thomas Howard, George Thomas Howard & Lee C. Hewitt, Underwriters Laboratories Inc., IL [RT]
Associates, NV [SE] Robert L. Hughes, DuPont, TN [U]
Gordon S. Johnson, Dundee, FL [M] Rep. Chemical Manufacturers Association
Rep. Electrical Generating Systems Association Steven C. Johnson, Time Warner Cable, CO [UT]
Robert J. Kakalec, Telcordia Technologies, NJ [UT] Rep. National Cable Television Association
(VL 445, 480, 700, 701, 702, and 705) Ronald G. Jones, Ronald G. Jones, TX [U]
Jack W. Kalbfeld, Kalico Technology Inc., NY [SE] Rep. Institute of Electrical & Electronics Engineers, Inc.
(VL 518, 520, 525, 530, and 540) Stanley Kaufman, Lucent Technologies, GA [M]
Michael B. Klein, Consentini Associates DC, LLP, MD [IM] Michael A. Lanni, Universal Studios, CA [U]
Rep. Illuminating Engineering Society of North America Rep. Motion Picture Association of America, Inc.
John R. Kovacik, Underwriters Laboratories, IL [RT] (VL 640, 720, 725, 760, 810, and 820)
Edwin S. Kramer, Radio City Music Hall, NY [L] John Mangan, Medford City Hall, MA [E]
Rep. Int'l. Association of Theatrical Stage Employees Rep. International Association of Electrical Inspectors
Michael A. Lanni, Universal Studios, CA [U] J. Jeffrey Moore, Industrial Risk Insurers, OH [I]
Rep. Motion Picture Association of America, Inc. Rep. HSB Industrial Risk Insurers
Dennis W. Marshall, T.D.B., Inc., TX [IM] James W. Romlein, MIS Labs, WI [M]
Rep. Independent Electrical Contractors Rep. Building Industry Consulting Service International
Richard Sobel, Quantum Electric Corp., NY [I M] Arthur E. Schlueter, Jr., A. E. Schlueter Pipe Organ Co., GA
Rep. National Electrical Contractors Association [M]
Kenneth E. Vannice, NSI Corp., OR [M] (VL 640, 650, 720, and 725)
Rep. US Institute for Theatre Technology Steven M. Speer, IBEW Local 640, AZ [L]
Rep. International Brotherhood of Electrical Workers
Alternates Kyle E. Todd, Entergy – GSU, TX [UT]
Rep. Edison Electric Institute
Mike Grunwald, IBEW Local 76, WA [L] Inder L. Wadehra, IBM Corp., NC [U]
Rep. International Brotherhood of Electrical Workers Rep. Information Technology Industry Council
(Alt. to B. Burrows) Melvin J. Wierenga, Wierenga & Associates, MI [IM]
Mitchell K. Hefter, Rosco Entertainment Technology, OR
[IM] Alternates
Rep. Illuminating Engineering Society of North America
(Alt. to M. B. Klein) Ronald P. Cantrell, IBEW Local 72, TX [L]
Natalie J. McCord, Central & South West, CSW, OK [UT] Rep. International Brotherhood of Electrical Workers
Rep. Edison Electric Institute (Alt. to S. M. Speer)
(Alt. to P. W. Amos) Larry Chan, City of New Orleans, LA [E]
Ronald H. Minter, Emergency Lighting Technical Center, SC Rep. International Association of Electrical Inspectors
[M] (Alt. to J. Mangan)
Rep. National Electrical Manufacturers Association Chrysanthos Chrysanthou, Telcordia Technologies, Inc., NJ
(Alt. to J. L. Boyer) [UT]
Michael D. Skinner, CBS Studio Center, CA [U] Rep. Alliance for Telecommunications Industry Solutions
Rep. Motion Picture Association of America, Inc. (Alt. to J. E. Brunssen)
(Alt. to M. A. Lanni) A. William Coaker, A. W. Coaker and Associates, Inc., OH
Steven R. Terry, Production Resource Group LLC, dba [M]
Production Arts, NJ [U] Rep. Society of the Plastics Industry Inc.
Rep. US Institute for Theatre Technology (Alt. to L. M. Caudill)
(Alt. to K. E. Vannice) Gilbert J. Diaz, Intertek Testing Services, N.A. Inc., TX [RT]
Herbert V. Whittall, Electrical Generating Systems Assn., FL (Alt. to R. W. Gubisch)
[M] William K. Hopple, Simplex Time Recorder Co., CA [M]
Rep. Electrical Generating Systems Association Rep. National Electrical Manufacturers Association
(Alt. to G. S. Johnson) (Alt. To S. E. Egesdal)
Harold F. Willman, City of Lakewood, CO [E] Richard S. Houghten, MI [M]
Rep. International Association of Electrical Inspectors (Alt. to A. E. Schluster, Jr.)
(Alt. to R. C. Duncan) (VL 640, 650, 720, and 725)
Steven H. Pasternack, Intertek Testing Services, N.A. Inc., NY Robert Jensen, Telecommunication Infrastructure Design, TX
[RT] [M]
(Voting Alt. to Intertek Testing) Rep. Building Industry Consulting Service International
Dale A. Triffo, Equilon Enterprises LLC, TX [U] (Alt. to J. W. Romlein)
Rep. Chemical Manufacturers Association William J. McCoy, GTE Technology Organization, TX [U]
(Voting Alt. to CMA) Rep. Institute of Electrical & Electronics Engineers, Inc.
(Alt. to R. G. Jones)
W. D. Pirkle, Pirkle Electric Co., Inc., GA [IM]
Rep. National Electrical Contractors Association
(Alt. to S. D. Kahn)
xv
Joseph W. Rao, RAO Electric Co., FL [RT] PANEL NO. 18
Rep. Independent Electrical Contractors
(Alt. To C. J. Goins) Articles 410, 411, 600, 605
Bradley C. Rowe, Underwriters Laboratories Inc., IL [RT]
(Alt. to L. C. Hewitt) Wayne Brinkmeyer, Chair [IM]
Oleh Sniezko, AT&T Broadband and Internet Services, CO Biddle Electric Corp., TX
[UT] Rep. National Electrical Contractors Association
Rep. National Cable Television Association
(Alt. to S.C. Johnson) Michael N. Ber, IEC, Houston, TX [IM]
Sondra K. Todd, Western Resources Co., KS [UT] Rep. Independent Electrical Contractors
Rep. Edison Electric Institute Robert L. Cochran, City of Costa Mesa, CA [E]
(Alt. to K. E. Todd) Rep. International Association of Electrical Inspectors
Lawrence J. Wenzel, Industrial Risk Insurers, CT [I] Rudy T. Elam, Systems Engineering Services, TN [U]
(Alt. to J. J. Moore) Rep. Institute of Electrical & Electronics Engineers, Inc.
Kevin D. Wilhelm, Eli Lilly and Co., IN [U] Kenneth F. Kempel, Underwriters Laboratories Inc., NC
Rep. Chemical Manufacturers Association [RT]
(Alt. to R. L. Hughes) Thomas J. Lynch, IBEW Local 99, RI [L]
Rep. International Brotherhood of Electrical Workers
Nonvoting Bernard J. Mezger, American Lighting Assn., NY [M]
Rep. American Lighting Association
Irving Mande, Edwards Systems Technology, CT (UL 410 and 411)
James F. Pierce, Intertek Testing Services NA Inc., OR [RT]
Saul Rosenbaum, Leviton Mfg. Co. Inc., NY [M]
PANEL NO. 17 Rep. National Electrical Manufacturers Association
Carl T. Wall, Alabama Power Co., AL [UT]
Article 517 Rep. Edison Electric Institute
Jack Wells, Pass & Seymour/Legrand, NY [M]
Robert E. Bernd, Chair [RT] Randall K. Wright, Wright Sign Co., PA [M]
Underwriters Laboratories Inc., IL Rep. International Sign Association
(VL 600)
Stephen Benesh, Square D Co., WI [M]
Rep. National Electrical Manufacturers Association Alternates
Thomas C. Clark, Clark Electrical Construction, Inc., TX
[IM] Mark R. Berner, PP&L, Inc., PA [UT]
Rep. Associated Builders and Contractors, Inc. Rep. Edison Electric Institute
James R. Duncan, Sparling, WA [U] (Alt. to C. T. Wall)
Rep. Institute of Electrical & Electronics Engineers, Inc. Robert T. Carlock, R. T. Carlock Co., TN [IM]
Douglas S. Erickson, American Society for Healthcare Rep. Independent Electrical Contractors
Engineering, IL [U] (Alt. to M. N. Ber)
Rep. American Society for Healthcare Engineering Howard D. Hughes, Hughes Electric Co. Inc., AR [IM]
James W. Hillebrand, Byron Electric Co., KY [IM] Rep. National Electrical Contractors Association
Rep. National Electrical Contractors Association (Alt. to W. Brinkmeyer)
James A. Meyer, Pettis Memorial VA Hospital, CA [C] Stephen G. Kieffer, Kieffer & Co., Inc., WI [M]
Rep. American Society of Anesthesiologists Rep. International Sign Association
Hugh O. Nash, Jr., Nash Lipsey Burch, LLC, TN [SE] (Alt. to R. K. Wright)
J. Randall Perdue, Entergy Services Inc., AR [UT] (VL 600)
Rep. Edison Electric Institute Steven A. Larson, Lockheed Martin Energy Systems, TN [U]
Jim M. Schmer, Boise City Building Dept., ID [E] Rep. Institute of Electrical & Electronics Engineers, Inc.
Rep. International Association of Electrical Inspectors (Alt. to R. T. Elam)
Jeffrey L. Steplowski, U.S. Dept. of Veterans Affairs, DC [U] John J. Mahal, Underwriters Laboratories Inc., IL [RT]
Duane J. Telecky, Washoe Medical Ctr., NV [U] (Alt. to K. F. Kempel)
Rep. NFPA Health Care Section Don Miletich, Cooper Lighting, IL [M]
Mike Velvikis, High Voltage Maintenance Corp., WI [IM] Rep. National Electrical Manufacturers Association
Rep. InterNational Electrical Testing Association Inc. (Alt. to S. Rosenbaum)
Walter N. Vernon, IV, Mazzetti & Associates Inc., CA [U] Michael S. O'Boyle, Lightolier, Div. of Genlyte Thomas
Rep. Consulting Engineers & Land Surveyors of CA Group, MA [M]
Andrew White, WFJEATC Local Union 3 IBEW, NY [L] Rep. American Lighting Association
Rep. International Brotherhood of Electrical Workers (Alt. to B. J. Mezger)
(VL 410 and 411)
Alternates Donald W. Shields, Town of Normal, IL [E]
Rep. International Association of Electrical Inspectors
Steve Campolo, Leviton Mfg. Co., Inc., NY [M] (Alt. to R. L. Cochran)
Rep. National Electrical Manufacturers Association David O. Thomas, IBEW Local 208, CT [L]
(Alt. to S. Benesh) Rep. International Brotherhood of Electrical Workers
Matthew B. Dozier, Smith Seckman Reid, Inc., TN [U] (Alt. to T. J. Lynch)
Rep. Institute of Electrical & Electronics Engineers, Inc. Charles M. Trout, Maron Electric Co., FL [IM]
(Alt. to J. R. Duncan) Rep. National Electrical Contractors Association
Stephen D. Hewson, Underwriters Laboratories Inc., IL [RT] (Alt. to W. Brinkmeyer)
(Alt. to R. E. Bernd)
Stanley D. Kahn, Tri-City Electric Co., Inc., CA [IM]
Rep. National Electrical Contractors Association PANEL NO. 19
(Alt. to J. W. Hillebrand)
David K. Norton, U.S. Dept. of Veterans Affairs, DC [U] Articles 545, 547, 550, 551, 552, 553, 555, 604, 675
(Alt. to J. L. Steplowski)
Gaylen D. Rogers, DFCM, UT [E] Robert A. McCullough, Chair [E]
Rep. International Association of Electrical Inspectors Ocean County Construction Inspection Dept., NJ
(Alt. to J. M. Schmer) Rep. International Association of Electrical Inspectors
Thomas L. Ryder, IBEW Local 692, MI [L]
Rep. International Brotherhood of Electrical Workers Barry Bauman, Alliant Energy, WI [U]
(Alt. to A. White) Rep. American Society of Agricultural Engineers
Richard H. Smith, OG&E Electric Services, OK [UT] James W. Finch, Kampgrounds of America, Inc., MT [U]
Rep. Edison Electric Institute (VL 550, 551, 552, and 555)
(Alt. To J. R. Perdue) Bruce A. Hopkins, Recreation Vehicle Industry Assn., VA
[M]
Rep. Recreation Vehicle Industry Association
(VL 550, 551, and 552)
Steven Johnson, IBEW, CA [L]
xvi
Rep. International Brotherhood of Electrical Workers Anthony Sardina, Carrier Corp., NY [M]
Robert L. LaRocca, Underwriters Laboratories Inc., NY [RT] Rep. Air Conditioning and Refrigeration Institute
Timothy P. McNeive, Thomas & Betts Corp., TN [M] (VL 422, 424, and 426)
Rep. National Electrical Manufacturers Association Donald J. Talka, UL Intrnational Germany GmbH [RT]
Leslie Sabin, San Diego Gas & Electric Co., CA, UT John T. Weizeorick, IL [M]
Rep. Edison Electric Institute Rep. Association of Home Appliance Manufacturers
Charles F. Shy, AC Corp./Electrical Division, NC [IM] (VL 422, 424, and 426)
Rep. Independent Electrical Contractors Lee L. West, Balboa Instruments, CA [M]
Dick Veenstra, Fleetwood Enterprises, Inc., CA [M] Rep. National Spa and Pool Institute
Rep. Manufactured Housing Institute (VL 680)
(VL 550, 551, and 552) Robert M. Yurkanin, Electran Process Int'l. Inc., NJ [U]
Kenneth Weakley, Mountain Electric, Inc., CA, [IM] Rep. Institute of Electrical & Electronics Engineers, Inc.
Rep. National Electrical Contractors Association
Michael L. Zieman, RADCO, CA [RT] Alternates
(VL 545, 550, 551, and 552)
Xen George Anchales, San Bernardino County/Dept. of Bldg.
Alternates & Safety, CA [E]
Rep. International Association of Electrical Inspectors
Glenn H. Ankenbrand, Conectiv Power, MD [UT] (Alt. to R. M. Milatovich)
Rep. Edison Electric Institute Dennis L. Baker, Springs & Sons Electrical Cont. Inc., AZ
(Alt. to L. Sabin) [IM]
Steven Blais, EGS - Electrical Group, IL [M] Rep. Independent Electrical Contractors
Rep. National Electrical Manufacturers Association (Alt. to M. Ramirez)
(Alt. to T. P. McNieve) Bruce R. Hirsch, Baltimore Gas & Electric Co., MD [UT]
James K. Hinrichs, St. of Washington, WA [E] Rep. Edison Electric Institute
Rep. International Association of Electrical Inspectors (Alt. to N. F. LaBrake, Jr.)
(Alt. to R. A. McCullough) Mark Leimbeck, Underwriters Laboratories, Inc., IL [RT]
John Mikel, Skyline Corporation, IN [M] (Alt. to D. J. Talka)
Rep. Manufactured Housing Institute Tom McDonald, Hubbell, Inc., CT [M]
(Alt. to D. Veenstra) Rep. National Electrical Manufacturers Association
(VL 550, 551, and 552) (Alt. to J. N. Pearse)
John Pabian, Underwriters Laboratories Inc., IL [RT] Stephen P. Schoemehl, Int'l. Brotherhood of Electrical
(Alt. to R. L. Larocca) Workers, MO [L]
Kent Perkins, Recreation Vehicle Industry Assn., VA [M] Rep. International Brotherhood of Electrical Workers
Rep. Recreation Vehicle Industry Association (Alt. to R. J. Egan)
(Alt. to B. A. Hopkins) Robert E. Wisenburg, Coates Heater Co., Inc., WA [M]
(VL 550, 551, and 552) Rep. National Spa and Pool Institute
Homer Staves, Kampgrounds of America, Inc., MT [U] (Alt. to L. L. West)
(Alt. to J. W. Finch) (VL 680)
(VL 550, 551, 552, and 555) Scott Cline, McMurtrey Electric, Inc., CA [IM]
LaVerne E. Stetson, U.S. Dept. of Agriculture, NE [U] Rep. National Electrical Contractors Association
Rep. American Society of Agricultural Engineers (Voting Alt. to NECA Rep.)
(Alt. to B. Bauman)
David N. Tilmont, IBEW Local Union 952, CA [L] Nonvoting
Rep. International Brotherhood of Electrical Workers
(Alt. to S. Johnson) Rick C. Gilmour, Canadian Standards Assn., ON
Raymond F. Tucker, RADCO, CA [RT] William H. King, Jr., U.S. Consumer Product Safety
(Alt. to M. L. Zieman) Commission, MD
(VL 545, 550, 551 and 552) Andrew M. Trotta, U.S. Consumer Product Safety
David Gorin, Nat'l. Assn. of RV Parks & Campgrounds, VA Commission, MD
[U] (Alt. to W. H. King, Jr.)
Rep. Nat'l. Assn. of RV Parks & Campgrounds
(Voting Alt. to ARVC rep.)
(VL 550, 551, and 552) The National Electrical Code Committee proposes for
adoption its Report on Proposals to NFPA 70, National
Electrical Code. NFPA 70-1999 is published in Volume 3 of the
PANEL NO. 20 2000 National Fire Codes and is in separate pamphlet form.
This Report has been submitted to letter ballot of the Code-
Articles 422, 424, 680 Making Panels of the National Electrical Code Committee and
the results of the ballot can be found in the Report.
Robert M. Milatovich, Chair [E] This Report has also been submitted to letter ballot of the
Clark County, NV Technical Correlating Committee which consists of 11 voting
Rep. International Association of Electrical Inspectors members. It was voted unanimously affirmative to release this
Report.
Robert J. Egan, Int'l. Brotherhood of Electrical Workers, MO
[L]
Rep. International Brotherhood of Electrical Workers
Walter Koessel, Intertek Testing Services, N.A. Inc., MO [RT]
Neil F. LaBrake, Jr., Niagara Mohawk Power Corp., NY [UT]
Rep. Edison Electric Institute
James N. Pearse, Leviton Mfrg. Co. Inc., NY [M]
Rep. National Electrical Manufacturers Association
Marcos Ramirez, Mr. Electric Service Co., Inc., NY [IM]
Rep. Independent Electrical Contractors
William F. Ryan, Jr., New York Board of Fire Underwriters,
NY [E]
xvii
The following classifications apply to Committee members and represent their principal interest in the activity
of the Committee.
1. M Manufacturer: A representative of a maker or marketer of a product, assembly, or system, or portion
thereof, that is affected by the standard.
2. U User: A representative of an entity that is subject to the provisions of the standard or that voluntarily
uses the standard.
3. IM Installer/Maintainer: A representative of an entity that is in the business of installing or maintaining a
product, assembly, or system affected by the standard.
4. L Labor: A labor representative or employee concerned with safety in the workplace.
5. RT Applied Research/Testing Laboratory: A representative of an independent testing laboratory or
independent applied research organization that promulgates and/or enforces standards.
6. E Enforcing Authority: A representative of an agency or an organization that promulgates and/or
enforces standards.
7. I Insurance: A representative of an insurance company, broker, agent, bureau, or inspection agency.
8. C Consumer: A person who is or represents the ultimate purchaser of a product, system, or service
affected by the standard, but who is not included in (2).
9. SE Special Expert: A person not representing (1) through (8), and who has special expertise in the scope
of the standard or portion thereof.
NOTE 1: “Standard” connotes code, standard, recommended practice, or guide.
NOTE 2: A representative includes an employee.
NOTE 3: While these classifications will be used by the Standards Council to achieve a balance for Technical
Committees, the Standards Council may determine that new classifications of member or unique interests need
representation in order to foster the best possible Committee deliberations on any project. In this connection, the
Standards Council may make such appointments as it deems appropriate in the public interest, such as the
classification of “Utilities” in the National Electrical Code Committee.
NOTE 4: Representatives of subsidiaries of any group are generally considered to have the same classification as
the parent organization.
xix
Related docs
