Fiber Optic Cabling System In-Door Fiber Optic Cable by myx17334

VIEWS: 102 PAGES: 15

									Fiber Optic Cabling System                                                 DINTEK
                                                                           LAN Cabling Systems


In-Door Fiber Optic Cable
In-Door Fiber Optic Cable:
	      Standard 04, 06, 08, 12C
	      Extremely flexible, tight buffer cable design
	      ATM, FDDI, Fiber channel cable performance guarantee
	      LSOH jacket


Mechanical Specification:
	      Storage Temperature: -40°C to 70°C
	      Operating Temperature: -40°C to 70°C

Application:
	      LAN
	      Drop ceiling
	      Internal- building
	      Backbone premise pathways


Fiber Count          Weight           O.D(mm)               Tensile Load    Bending Radius

  4C                23kg/ km          4.8mm                1000N/ 225lbs          48mm
  6C                37kg/ km          6.5mm                1000N/ 225lbs          65mm
  8C                41kg/ km          6.8mm                1400N/ 315lbs          68mm
  12C               47kg/ km          7.0mm                1800N/ 405lbs         70mm

	      Flame rating:OFNR

Transmission Performace:

                                Single-mode          Multi-mode            Multi-mode
            Item
                          9/125um(1310/1550nm) 50/125um(850/1300nm) 62.5/125um(850/1300nm)
Max. attenuation(dB/km)             0.7/0.7                    3.5/2.0       3.5/1.0
Min. bandwidth(MHz/km)              - / -                   500/500         200/500


      P/N                  Description                   Std Pkg Qty

2101-02001         4C, Multi-Mode, 50/ 125um        2km/reel
2101-02002         6C, Multi-Mode, 50/ 125um        2km/reel
2101-02003         8C, Multi-Mode, 50/ 125um        2km/reel
2101-02004         12C, Multi-Mode, 50/ 125um       2km/reel
2101-03002         4C, Multi-Mode, 62.5/ 125um      2km/reel
2101-03003         6C, Multi-Mode, 62.5/ 125um      2km/reel
2101-03004         8C, Multi-Mode, 62.5/ 125um      2km/reel
2101-03005         12C, Multi-Mode, 62.5/ 125um     2km/reel

	      Single-mode 9/125um cables are available upon request.




 48                                                                        www.dintek.com.tw
Fiber Optic Cabling System                                                        DINTEK
                                                                                   LAN Cabling Systems


Indoor/Outdoor Fiber Optic Cable
Feature:
	     Standard 04, 06, 08, 12C
	     Central code tube design
	     Color-coded fiber for easy identification
	     LSOH for outside jacket material


Application:
	     Drop ceiling
	     Internal- building
	     Outdoor back bone for Duct applications

Mechanical Specification:
      Storage Temperature: -40°C to +70°C
      Operating Temperature: -30°C to +70°C


       Fiber Count            Weight       O.D(mm)        Tensile Load           Bending Radius

           04-12             65kg/km       8.7±0.4        2700N/603lbs    20 x O.D during installation


Transmission Performace:

                               Single-mode          Multi-mode            Multi-mode
           Item
                         9/125um(1310/1550nm) 50/125um(850/1300nm) 62.5/125um(850/1300nm)

Max. attenuation(dB/km)             0.5/0.4                     3.5/2.0              3.5/1.0
Min. bandwidth(MHz/km)                 - / -                500/500                 200/500


     P/N                    Description               Std Pkg Qty

2102-02002 4C, Multi-Mode, 50/ 125um,LSOH            2km/reel

2102-02003 6C, Multi-Mode, 50/ 125um,LSOH            2km/reel
2102-02001 8C, Multi-Mode, 50/ 125um,LSOH            2km/reel
2102-02004 12C, Multi-Mode, 50/ 125um,LSOH           2km/reel
2102-03001 4C, Multi-Mode, 62.5/ 125um,LSOH          2km/reel
2102-03002 6C, Multi-Mode, 62.5/ 125um,LSOH          2km/reel

2102-03004 8C, Multi-Mode, 62.5/ 125um,LSOH          2km/reel
2102-03003 12C, Multi-Mode, 62.5/ 125um,LSOH         2km/reel
	     Single Mode 9/ 125um cables are available upon request




www.dintek.com.tw                                                                                 49
Fiber Optic Cabling System                                                              DINTEK
                                                                                         LAN Cabling Systems


Out-Door Dielectric Fiber Cable
Feature:
	      Central code tube design
	      Color-coded fiber for easy identification
        during installation
	      4 to 12 fiber available                                                            MDPE jacket
        MDPE outer jacket                         Aramid yarns
	
	      Conform with IEC 793, EIA/TIA-492
                                                                                           Water blocking type
                                                     Core tube
Mechanical Specification:
	      Storage Temperature: -40°C to +70°C
	      Operating Temperature: -40°C to +70°C

Application:
	       Outdoor back bone for aerial and duct applications
	     Indoor back bone for open tray and conduit applications



        Fiber Count           Weight       O.D(mm)               Tensile Load          Bending Radius

            04-12            60kg/km       8.7±0.4           2700N/603lbs       20 x O.D during installation


Transmission Performace:

                                Single-mode                 Multi-mode                 Multi-mode
            Item
                          9/125um(1310/1550nm)        50/125um(850/1300nm)      62.5/125um(850/1300nm)
                                                                                         3.5/1.0
Max. attenuation(dB/km)              0.5/0.4                       3.5/2.0               3.5/1.0
                                                                                        200/500
Min. bandwidth(MHz/km)                 - / -                      400/400               200/500



      P/N                  Description                 Std Pkg Qty
2103-02001          4C, Multi-Mode, 50/ 125um            2km/reel

2103-02002          6C, Multi-Mode, 50/ 125um            2km/reel

2103-02003          8C, Multi-Mode, 50/ 125um            2km/reel
2103-02004          12C, Multi-Mode, 50/ 125um           2km/reel
2103-03007          4C, Multi-Mode, 62.5/ 125um          2km/reel
2103-03004          6C, Multi-Mode, 62.5/ 125um          2km/reel
2103-03009          8C, Multi-Mode, 62.5/ 125um          2km/reel
2103-03010          12C, Multi-Mode, 62.5/ 125um         2km/reel
	      Single Mode 9/ 125um cables are available upon request




 50                                                                                     www.dintek.com.tw
Fiber Optic Cabling System                                                       DINTEK
                                                                                  LAN Cabling Systems


Out-Door Armor Fiber Optic Cable
Feature:
	      Central code tube design
	      Color-coded fiber for easy identification
        during installation
	      4 to 12 fiber available
	      MDPE outer jacket
	      Conform with IEC 793, EIA/TIA-492


Mechanical Specification:
	      Storage Temperature: -40°C to +75°C
	      Operating Temperature: -40°C to +70°C
	      Installation Temperature: -30°C to +60°C

Application:
	      Outdoor back bone for aerial and duct applications
	    Indoor back bone for open tray and conduit applications


 Fiber Count            Weight          O.D(mm)         Tensile Load        Bending Radius

     04-12             155kg/km         11.6±0.4        2700N/603lbs   20 x O.D during installation


Transmission Performace:
                                Single-mode               Multi-mode              Multi-mode
             Item
                          9/125um(1310/1550nm)      50/125um(850/1300nm)   62.5/125um(850/1300nm)

Max. attenuation(dB/km)                                      3.5/2.0               3.5/1.0
                                                                                  3.5/1.0
                                   0.5/0.4
Min. bandwidth(MHz/km)                                      500/500                200/500
                                                                                  200/500
                                    - / -



     P/N                    Description             Std Pkg Qty

2103-02005          4C, Multi-Mode, 50/ 125um         2km/reel
2103-02006          6C, Multi-Mode, 50/ 125um         2km/reel
2103-02007          8C, Multi-Mode, 50/ 125um         2km/reel
2103-02008          12C, Multi-Mode, 50/ 125um        2km/reel
2103-03012          4C, Multi-Mode, 62.5/ 125um       2km/reel
2103-03001          6C, Multi-Mode, 62.5/ 125um       2km/reel
2103-03002          8C, Multi-Mode, 62.5/ 125um       2km/reel
2103-03013          12C, Multi-Mode, 62.5/ 125um      2km/reel

	      Single Mode 9/ 125um cables are available upon request




www.dintek.com.tw                                                                                51
Fiber Optic Cabling System                                                            DINTEK
                                                                                      LAN Cabling Systems


Fiber Optic Patch Cord
	      Standard ST/ST, ST/SC and SC/SC fiber optic             	   Fully tested prior to shipment
        patch cables                                            	   Customized length also available.
	      Simplex and Duplex type                                 	   LC. MT-RJ and FC is also available


      P/N                 Description                 Std Ctn Qty

2104-01006       ST/ST, duplex,,2M, 62.5/125um            300

2104-01008       ST/ST, duplex,,3M, 62.5/125um            240

2104-01009       ST/ST, duplex,,5M, 62.5/125um            200



2105-01003       STpigtail,1M, 62.5/125um                1000




2104-03006       SC/SC, duplex,,2M, 62.5/125um            300

2104-03008       SC/SC, duplex,,3M, 62.5/125um            240

2104-03009       SC/SC, duplex,,5M, 62.5/125um            200




2105-02001       SCpigtail,1M, 62.5/125um                1000




2104-02003       SC/ST, duplex,,2M, 62.5/125um            300

2104-02004       SC/ST, duplex,,3M, 62.5/125um            240

2104-02005       SC/ST, duplex,,5M, 62.5/125um            200




2104-06001       MTRJ/MTRJ, duplex, 5M, 62.5/125um        200




2104-07003       LC/LC, duplex, 3M, 9/125um               240




2104-05002       FC/FC, simplex, 5M, 62.5/125um           200




2104-04011       SC/FC,duplex, 2M, 62.5/125um             300

2104-04010       SC/FC,duplex, 3M, 62.5/125um             240

2104-04002       SC/FC,duplex, 5M, 62.5/125um             200
	      Please contact us for any customized requirements.



 52                                                                                   www.dintek.com.tw
Fiber Optic Cabling System                                                             DINTEK
                                                                                       LAN Cabling Systems


Wall Mount Fiber Optic Enclosure
     Accepts up to 12 ports in either ST or SC configuration
     ST and SC connectors are available separately to load into the enclosure

     P/N                  Description                   Std Pkg Qty



                 12 ports ST coupler wall enclosure
2202-12001                                                         10
                 include 2 pieces of 6 port ST panel




                  Wall mount fiber enclosure .6 port dual
2202-12007        SC type. Equipped with splice tray,              10
                  holder and snap-in panel accordingly


                  Wall mount fiber enclosure. 12 port ST
2202-12006        type. Equipped with splice tray, holder          10
                  and snap-in panel accordingly



19” Fiber Optic Rack Mount Enclosure
	     Termination panel that slides out for easy access
	     Splice tray, sleeves and ST/SC connectors are available separately to load into panel
	     Can be mounted on 19” EIA racks
     P/N                  Description                   Std Pkg Qty

              19” 1U space, 24 ports ST coupler
2201-24014                                                     6
              rack mount enclosure with sliding tray,
              includes 2 pieces of 12 port ST panel

              19” 1U space, 12 ports duplex SC rack
2201-24015    mount enclosure with sliding tray,
                                                               6
              includes 2 pieces of 6 port duplex SC
              panel

              19” 2U space, 48 ports ST coupler
2201-48001    rack mount enclosure with sliding tray,          4
              includes 8 pieces of 6 port ST panel


              19” 1U. space, 12 port duplex SC rack
2201-24013    mount enclosure,includes 2 pieces of 6          10
              ports duplex SC panel

              19” 1U. space, 24 port ST coupler rack
2201-24012    mount enclosure,includes 2 pieces of 12         10
              ports ST panel



2204-02001    12 ports of splice tray                         10




2205-02002    12 ports of splicing holder                     10
     P/N                                                Description

2206-00001    Fusion splice protector sleeve                  25




www.dintek.com.tw                                                                                     53
Fiber Optic Cabling System                                                            DINTEK
                                                                                      LAN Cabling Systems


Fiber Optic Connectors
	     For connecting fiber links, choose from simplex or duplex, multi-mode or single-mode and so on.
	     Customized length also available.

Performace specifications:
	 Insertion Loss (dB): <=0.20 (single-mode), <=0.20 (multi-mode)
	 Return Loss (dB): >=55 (single-mode), >=40 (multi-mode)




      P/N           Description             Std Pkg Qty   Std Ctn Qty

2107-01003     ST coupling receptacle            50       500




2107-03001     SC duplex type coupling           50       500
               receptacle


2107-03002     SC simplex type coupling          50       500
               receptacle


2107-05001     FC coupling receptacle,square     50       500
               flange type.


2107-05004     FC coupling receptacle            50       500
               MM,round flange (D-type) type.


2106-01002     ST connector, multi-mode,for      50       500
               cable O.D:3.0mm


2106-01003     ST connector, multi-mode,for      50       500
               cable O.D:0.9mm


2106-01004     ST connector, single-mode,for     50       500
               cable O.D:3.0mm



2106-02001     SC connector, single-mode,        50       500
               for cable O.D.:3.0mm


2106-02002     SC connector, multi-mode, for     50       500
               cable O.D.:3.0mm


2106-03001     FC connector, single-mode,for     50       500
               cable O.D:3.0mm


2106-03002     FC connector, multi-mode,for      50       500
               cable O.D:3.0mm


2106-03003     FC connector, multi-mode,for      50       500
               cable O.D:0.9mm




 54                                                                                   www.dintek.com.tw
Fiber Optic Cabling System                                                                DINTEK
                                                                                          LAN Cabling Systems


19” Rack-Mount Media Converter Chassis
Overview:
The 19-inch rack mount chassis is designed to accommodate 18 or 19 line cards of various types of
media converters for easy operation and management. The compact 2U height saves the space of
central offices. The redundant power system can be DC or AC to meet your different needs.


Key Features:
    19-inch standard chassis with 2U height

    Supports up to 19 line card converters

    2 power supplies, AC or DC interchangeable

 1 cooling fan
 1 display card indicating the status of powers and fan
 FCC Class A, CE Mark

Technical Specification:
 Mechanical                                       Physical Characteristics
    Standards: 19-inch chassis                        Applicable line cards: CS-110 line card series
    Height :2U                                        Operating Temperature: 0°C to 70°C
    18 standard slots for media converter             Operating Humidity: 10% to 90% (Non-condensing)
    line cards and 1 dual-function slot for           AC Power Supply Input: 100~250VAC 50~60Hz,
    a media converter line card or an LED                              Output: 12VDC 8.5A
    diagnostic card                                   DC Power Supply Input: 18~56VDC,

                                                                       Output: 12VDC 8.5A




                                        L2 Switch Hub




                              19” Rack Chassis




                 1000Base-SX/LX Fiber
                                         100Base-Fx Fiber
                                                                 100Base-Fx Fiber




                                                                                     Fiber Optic Cable




     P/N                  Description                              Std Pkg Qty

                  19” rack mount chassis for media conversion
2609-02005                                                              1
                  modules with redundant power


www.dintek.com.tw                                                                                        55
Fiber Optic Cabling System                                                          DINTEK
                                                                                     LAN Cabling Systems


10/100M TP to 100Base-FX Converter
Overview:
10/100Base-TX/FX media converter provides you with various optional connectors for your fiber optic
cable and RJ-45 ports (straight through and crossover) for your 10/100Base-TX cable connection. Eight
LED indicators signal the detailed operating status of the converter for easier fault identification.
10/100Base-TX/FX is provided in two package forms.The stand-alone unit is powered by external
adaptor, while the slide-in card is used in 19-inch rack mount chassis.

Key Features:
			Complies with IEEE 802.3 10Base-T, IEEE802.3u 100Base-TX and 100Base-FX standards
			Fiber connectivity up to 2km for multimode fiber, 60km for single-mode fiber
			Optional SC, FC, ST, LC or Bi-directional SC(single mode only) fiber connectors
			Full-Duplex, Half-Duplex, or Auto-Negotiation
			Supports packet length up to 1600 bytes

Technical Specifications:
	  Standards IEEE 802.3 10Base-T, 802.3u 100Base-TX and 100Base-FX
	  Protocol CSMA/CD
			Cable:
        Cat.5 UTP Cable: support distance up to 100M
        Fiber: 850/1300nm multi-mode support distance up to 2km
           1310/1550nm single-mode support distance up to 60km
			Connector:
    RJ-45: 10/100 Mbps auto-negotiation
    ST/SC/LC: 100 Mbps
	      External Power Supply for Stand-alone unit:
        Input rating: 100 ~ 240 VAC, 50-60 Hz
        Output rating: 5 VDC, 1A
	      Operating temperature: 0 to 70°C
	      Humidity: 10% to 90%
	      Dimensions:
        Stand-alone unit:21.4(H) x 63.6(W) x102(D)mm
        Slide-in card:22.2(H) x 87(W) x 113.5(D)mm

      P/N                           Description                                       Std Pkg Qty

2610-01005      10/100Base-TX/FX. RJ-45/ST. Duplex multi-mode. 2km. Stand-alone unit              1

2610-01005C     10/100Base-TX/FX. RJ-45/ST. Duplex multi-mode. 2km. Slide-in card                 1

2610-02011      10/100Base-TX/FX. RJ-45/SC. Duplex multi-mode. 2km. Stand-alone unit              1

2610-02011C     10/100Base-TX/FX. RJ-45/SC. Duplex multi-mode. 2km. Slide-in card                 1

2610-05002      10/100Base-TX/FX. RJ-45/LC. Duplex single-mode. 30km. Stand-alone unit            1

2610-05002C     10/100Base-TX/FX. RJ-45/LC. Duplex single-mode. 30km. Slide-in card               1

2610-02010      10/100Base-TX/FX. RJ-45/SC. Duplex single-mode. 30km. Stand-alone unit            1

2610-02010C     10/100Base-TX/FX. RJ-45/SC. Duplex single-mode. 30km. Slide-in card               1

2610-05003      10/100Base-TX/FX. RJ-45/LC. Duplex single-mode. 60km. Stand-alone unit            1

2610-05003C     10/100Base-TX/FX. RJ-45/LC. Duplex single-mode. 60km. Slide-in card               1

2610-02012      10/100Base-TX/FX. RJ-45/SC. Duplex single-mode. 60km. Stand-alone unit            1

2610-02012C     10/100Base-TX/FX. RJ-45/SC. Duplex single-mode. 60km. Slide-in card               1

	      The other simplex single-mode types and US power plug are available upon request.


 56                                                                                 www.dintek.com.tw
    Fiber Optic Cabling System                                                              DINTEK
                                                                                            LAN Cabling Systems


    10/100/1000Base-T to 1000Base-SX/LX Converter
    Overview:
    10/100/1000Base-TX/FX media converter provides you with optional connectors for your fiber optic
    cable and RJ-45 ports (straight through and crossover) for your 1000Base-T cable connection. The media
    conversion is accomplished without any complex setting. LED indicators signal the detailed operating
    status of the converter for easier fault identification. 10/100/1000Base-TX/FX is provided in two package
    forms. The stand-alone unit is powered by external adaptor, while the slide-in card is used in 19-inch rack
    mount chassis.
    Key Features:
   			Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX/FX, IEEE 802.3ab 1000Base-T and
      			IEEE 802.3z 1000Base-SX/LX
   			Fiber connectivity up to 550m for multi-mode fiber, 60km for single-mode fiber
   			One auto-MDIX RJ-45 connector interface
   			Full-Duplex, Half-Duplex, or Auto-Negotiation
   			8 diagnostic LEDs (power, duplex/collision, TP 1000 Mbps, TP 100 Mbps, TP 10 Mbps, fiber link,
               transmitting, receiving)
   			Provides fault propagation function for easy cable fault detection
    Technical Specifications:
    	     Standards IEEE 802.3 10Base-T, 802.3u 100Base-TX/FX, 802.3ab 1000Base-T and 802.3z
           1000Base-SX/LX
    	  Protocol CSMA/CD
    			Cable:
           Cat.5 UTP Cable: support distance up to 100M
           Fiber: Up to 550 m with 50/125 or 62.5/125 μm multimode fiber
                  Up to 60 km with 9/125 μm single-mode fiber
    			Connector:
           RJ-45: 10/100/1000 Mbps auto-negotiation
           SC, FC, ST, LC or Bi-directional SC (single mode only): 1000 Mbps
    	     External Power Supply for Stand-alone unit:
           Input rating: 100 ~ 240 VAC, 50-60 Hz
           Output rating: 5 VDC, 1A
    	     Operating temperature: 0 to 70°C
    	     Humidity: 10% to 90%
    	     Dimensions:
           Stand-alone unit:21.4(H) x 63.6(W) x102(D)mm
           Slide-in card:22.2(H) x 87(W) x 113.5(D)mm
         P/N                              Description                                        Std Pkg Qty
    2615-02001         10/100/1000Base-TX/1000Base-FX. RJ-45/SC. Duplex MM. 550m. Stand-alone unit           1

    2615-02001C        10/100/1000Base-TX/1000Base-FX. RJ-45/SC. Duplex MM. 550m. Slide-in card              1

    2615-02004         10/100/1000Base-TX/1000Base-FX. RJ-45/SC. Duplex SM. 10km. Stand-alone unit           1

    2615-02004C        10/100/1000Base-TX/1000Base-FX. RJ-45/SC. Duplex SM. 10km. Slide-in card              1

    2615-02005         10/100/1000Base-TX/1000Base-FX. RJ-45/SC. Duplex SM. 20km. Stand-alone unit           1

    2615-02005C        10/100/1000Base-TX/1000Base-FX. RJ-45/SC. Duplex SM. 20km. Slide-in card              1

    2615-02006         10/100/1000Base-TX/1000Base-FX. RJ-45/SC. Duplex SM. 40km. Stand-alone unit           1

    2615-02006C        10/100/1000Base-TX/1000Base-FX. RJ-45/SC. Duplex SM. 40km. Slide-in card              1

    2615-02007         10/100/1000Base-TX/1000Base-FX. RJ-45/SC. Duplex SM. 60km. Stand-alone unit           1

    2615-02007C        10/100/1000Base-TX/1000Base-FX. RJ-45/SC. Duplex SM. 60km. Slide-in card              1

    	      The other simplex single-mode types and US power plug are available upon request.

    www.dintek.com.tw                                                                                      57
Fiber Optic Cabling System                                                              DINTEK
                                                                                        LAN Cabling Systems



1000Base-T to 1000Base-SX/LX Media Converter
Overview:
1000Base-TX/FX media converter provides you with optional connectors for your fiber optic cable and
RJ-45 ports (straight through and crossover) for your 1000Base-T cable connection. LED indicators
signal the detailed operating status of the converter for easier fault identification.
1000Base-TX/FX is provided in two package forms. The stand-alone unit is powered by external adaptor,
while the slide-in card is used in 19-inch rack mount chassis.

Key Features:
			Easy installation without adjustment and configuration setting
			Support of full duplex transmission
			Cut-through operation mode for very low latency
			6 diagnostic LEDs (Power, Full Duplex /Collision, Fiber Link, Fiber Receiving, TPLink and
            Fiber Transmitting)
			Optional stand-alone unit and slide-in card

Technical Specifications:
	  IEEE Compliance 802.3z 1000Base-SX/LX, 802.3ab 1000Base-T
			Cable:
        Cat.5 UTP Cable: support distance up to 100M
        Fiber: Up to 550 m with 50/125 or 62.5/125 μm multimode fiber
               Up to 60 km with 9/125 μm single-mode fiber
			Connector:
        RJ-45: 1000Base-T supported
        SC: 1000Base-SX/LX supported
	      External Power Supply for Stand-alone unit:
        Input rating: 100 ~ 240 VAC, 50-60 Hz
        Output rating: 5 VDC, 1A
	      Operating temperature: 0 to 70°C
	      Humidity: 10% to 90%
	      Dimensions:
        Stand-alone unit:21.4(H) x 63.6(W) x102(D)mm
        Slide-in card:22.2(H) x 87(W) x 113.5(D)mm
			Electromagnetic Compliance: FCC Class A, CE Class A

      P/N                              Description                                       Std Pkg Qty

2611-02004          1000Base-TX/FX. RJ-45/SC. Duplex multi-mode. 550m. Stand-alone unit              1

2611-02004C         1000Base-TX/FX. RJ-45/SC. Duplex multi-mode. 550m. Slide-in card                 1

2611-02005          1000Base-TX/FX. RJ-45/SC. Duplex single-mode. 10km. Stand-alone unit             1

2611-02005C         1000Base-TX/FX. RJ-45/SC. Duplex single-mode. 10km. Slide-in card                1

2611-02006          1000Base-TX/FX. RJ-45/SC. Duplex single-mode. 20km. Stand-alone unit             1

2611-02006C         1000Base-TX/FX. RJ-45/SC. Duplex single-mode. 20km. Slide-in card                1

2611-02007          1000Base-TX/FX. RJ-45/SC. Duplex single-mode. 40km. Stand-alone unit             1

2611-02007C         1000Base-TX/FX. RJ-45/SC. Duplex single-mode. 40km. Slide-in card                1

2611-02008          1000Base-TX/FX. RJ-45/SC. Duplex single-mode. 60km. Stand-alone unit             1

2611-02008C         1000Base-TX/FX. RJ-45/SC. Duplex single-mode. 60km. Slide-in card                1

	      The other simplex single-mode types and US power plug are available upon request.



 58                                                                                     www.dintek.com.tw
Fiber Optic Cabling System                                          DINTEK
                                                                    LAN Cabling Systems


Gigabit Ethernet Multi-mode to Single-mode Converter
Key Features:
	     Supports 1000Base-SX/LX multi-mode to
       single-mode conversion
	     Good for application to extend network
       distances up to 10Km
	     Standalone or compositioh applications


Technical Specifications:
	     Multi-mode 1000SX----Single-mode 1000LX
	      SC:220m 850nm ----SC: 10Km 1310nm
	     Fiber cable:
	      50/125, 62.5/125, or 100/140um multi-mode
	      8.3/125, 8.7/125, or 9/125um single-mode
	     Data Transfer Rate: 2,000Mbps at full-duplex
       mode
	     LED Indicators:
	      power, SD (signal detect ) for multi/single
       mode fiber port
	     Power requirement: 1A@5VDC
	     Ambient temperature: 0 to 50°C
	     Humidity: 5% to 90%
	     Dimensions: 26.2(H) x 70.3(W) x 94(D)mm
	     FCC Part 15 Class A, CE Mark & UL




     P/N                    Description               Std Pkg Qty

                Gigabit SX multi-mode to LX single-
2612-01001                                               1
                mode. SC/SC. US power plug.
                10KM, 100~240VAC


                Gigabit SX multi-mode to LX single-
2612-01002                                               1
                mode. SC/SC. UK power plug.
                10KM, 100~240VAC




www.dintek.com.tw                                                                  59
 Fiber Optic Cabling System                                                       DINTEK
                                                                                  LAN Cabling Systems


 6-Port 10/100Base-TX + 2 10/100Base SFT ports Switch
 Overview:
 The fast Ethernet switch equipped with 6 Copper
 and 2 SFP ports, which can be promptly set by DIP
 switches.2 Fiber (SFP) ports are for the connection
 with distant Intranet or FTTH service provider. It also
 can be deployed as a media converter with Copper to
 Fiber or Single-mode to Multimode applications. It
 is fully compliant with IEEE802.3, IEEE802.3u, and
 IEEE802.3x standards.




 Key Features:
  			Auto MDI-MDIX for all Copper ports
 			Supports auto-polarity for 10 Mbps
 			Supports 802.3x Flow Control for Full-Duplex mode and Back Pressure for Half-Duplex mode
 			Supports 1k MAC addresses
 			512k bits packet buffer memory
 			Supports Smart Cable Analysis (SCA) for easy cable fault diagnosis
 			Supports Aging Timer of queuing packets
 			Supports the options of filtering or forwarding special addresses
 			Supports port base VLAN groups
 			Supports power saving mode for 10 Mbps operation
 			Supports Link Down Power Saving (LDPS) mode
 			Supports MLT3 detection for switching from 10 Mbps to 100 Mbps
 			Supports Broadcast Storm protection
 			Supports Aggressive Back-off mode to get higher priority in a collision event
 			Supports higher priority for Fiber (SFP) ports
 			Supports two-level Class of Service (CoS)
 			Supports optional maximum packet size of 1536 or 1552 bytes
 			3 diagnostic LED’s for each port (Link, Speed and Duplex)



 Technical Specifications:
 			IEEE Compliance: 802.3 Ethernet, 802.3u Fast Ethernet, 802.3x Flow Control
 			Switch Fabric:1.6 Gbps
 			Forwarding Rate:14880 pps at 10 Mbps, 148800 pps at 100 Mbps
 			MAC Address Table Size:1k
 			Packet Buffer Memory:512k bits
 			Copper Interface:6 10Base-T/100Base-TX supported RJ-45 ports
 			SFP Interface:2 100Base-FX supported ports
 			LED Indicators:Power, Link (per port), Speed (per port), Duplex (per port)
 			Control Interface:10 DIP switches, 1 RESET button switch
 			Power Supply:Input: 100 ~ 240 VAC 50 ~ 60Hz, Output: 5VDC, 2A
 			Dimensions:107.4 mm x 173.2 mm x 27.1 mm
 			Weight:500g
 			Operating Temperature:0 ~ 50ºC
 			Operating Humidity:10% ~ 90% RH
 			Electromagnetic Compliance:FCC Class B, CE Class B 2/4


  60                                                                              www.dintek.com.tw
Fiber Optic Cabling System                                                            DINTEK
                                                                                      LAN Cabling Systems

Applications:
  FTTH




                                                                                      FTTH
            10/100Base-TX Auto Sensing                     100Base-Fx Fiber


  LAN-to-LAN Fiber Link




           10/100Base-TX Auto Sensing                      100Base-Fx Fiber



  Add/Drop Converter




         1000Base-SX/LX Fiber                  100Base-Fx Fiber



                          Intelligent Switch                      SNMP MANAGER


  Daisy Chain




                                                    Daisy Chain
                    100Base-Fx Fiber             100Base-Fx Fiber         100Base-Fx Fiber



  Fiber Extender / Single-mode to Multimode Converter




            Singlemode or Multimode                                Singlemode or Multimode
                    100Base-Fx Fiber                         100Base-Fx Fiber


www.dintek.com.tw                                                                                    61
 Fiber Optic Cabling System                                                              DINTEK
                                                                                          LAN Cabling Systems
FUNCTIONAL DESCRIPTION
Flow Control
The fast Ethernet switch Supports 802.3x Flow Control for Full-Duplex mode and Back Pressure for Half-
Duplex mode. Furthermore, it provides an additional protection function. When it issues continuous 16
Pause ON frames (network abnormal), no more Pause ON frame will be sent.
SCA (Smart Cable Analysis)
This function is valid only under point-to-point Ethernet connection with SCA implemented on both end
apparatuses. The cable status will be shown by LED indicators.
Aging Timer
The longest time for packets queuing in the buffer can be set to 300 seconds. This can prevent the buffer
from being occupied by outdated packets.
Reserved Address Forward Filter
The fast Ethernet switch supports the ability to drop 802.1d specified reserved group MAC address
(01-80-C2-00-00-04 to 01-80-C2-00-00-0F). Frames with group MAC address 01-80-C2-00-00-01 (802.3x
Pause) and 01-80-C2-00-00-02 (802.3ad LACP) will always be filtered.
Port Base VLAN
Port 7 (one of the SFP ports) can be set to be VLAN-grouped with each of other ports. This feature is
convenient for the FTTH application as Port 7 is set to be the uplink port.
Power Saving Mode
The 10M transmit amplitude is depressed in this mode.
LDPS (Link Down Power Saving) Mode
When the system link down, it will automatically switch to this mode once this function is enabled. In this
mode, the system will save power by decreasing the frequency of FLP (fast link pulse).
MLT3 Detection
When this function in enabled, it supports the ability to detect MLT3 (for 10 Mbps switch to 100 Mbps).
Broadcast Storm Protection
A port begins to drop packets if it receives broadcast packets more than the defined threshold.
Aggressive Back-off Mode
The fast Ethernet switch adopts modified (aggressive) back off algorithm if this function is enabled.
The maximum back off period is limited to 8-slot time. It makes the fast Ethernet switch have higher
transmission priority in a collision event.
High Priority Fiber Ports
Packets received from Fiber ports (SFP ports, port 6 and 7) are handled as high priority packets if the
function is enabled.
CoS (Class of Service)
Packets with high priority tag are handled as high priority packets to share more bandwidth if the function
is enabled.
Maximum Packet Size Options
The fast Ethernet switch will drop packets with length longer than 1536 bytes if enable the function. On the
contrary, it will drop packets with length longer than 1552 bytes




    P/N                             Description                                         Std Pkg Qty

 2903-07001                   6-Port 10/100Base-TX + 2 100Base SFP ports Switch                1

 2903-07002                   Multimode 100Base-FX SFP Transceiver, 2 km                       1

 2903-07003                   Single-mode 100Base-FX SFP Transceiver, 30 km                    1

 2903-07004                   Single-mode 100Base-FX SFP Transceiver, 60 km                    1

 2903-07005                   Single-mode 100Base-FX SFP Transceiver, 80 km                    1




   62                                                                                    www.dintek.com.tw

								
To top