Welding Technology

Document Sample
Welding Technology Powered By Docstoc
					Dusty Baker
Faculty Advisor/Program Director                            Student Name                                      Academic Advisor Name

575.624.7318
Telephone Number                                         Student I.D. Number                                                        Date

                                       Welding Technology
                        Associate of Applied Science Degree Plan Checklist
Please refer to page 61 of the 2009-2011 Catalog for detailed degree plan information.
Advisor’s Notes/Recommendations:
     The A.A.S. Degree in Welding Technology transfers into a Bachelor of Applied Arts and Science (BAAS) Degree program or
         Bachelor of Occupational Education (BOE) Degree program at ENMU. Please check all Core Courses for transferability into this
         degree plan.
     Student must have an ENMU Campus System cumulative grade point average of 2.0 in order to meet graduation requirements.
     Submit a Graduation Application before the close of the semester preceding the expected completion date.
Program Requirements:
     This program requires students to purchase their own tools. To obtain a list of the required tools, contact the program instructor.

                                                                                             Credit           Grade           Semester
University Skills Requirement
                                                                                             Hours
ENG        100L      Basic English Skills                                                    4 hrs.
ENG        101       Developmental Writing                                                   3 hrs.
                     Prerequisite/Corequisite: UNIV 101 or UNIV 102
MATH       100 / L   Basic Math Skills and Lab                                               4 hrs.              /
MATH       101       Basic Algebra                                                           3 hrs.
                     Prerequisite: Satisfactory ACT score or MATH 100/L
RED        100       Basic Reading Skills                                                    4 hrs.
RED        101       College Reading Skills                                                  3 hrs.
                     Prerequisite/Corequisite: UNIV 101 or UNIV 102

General Course Requirements
UNIV      101     Success Skills for College and Career                                      3 hrs.
CAS       135     Computer Applications for Technical Education                              3 hrs.
BUS       151     Introduction to Business                                                   3 hrs.
COMM      101     Interpersonal Communication                                                3 hrs.
ENG       102     English Composition                                                        3 hrs.
                     Prerequisite: ENG 101 and READ 101 or ACT scores
MATH       105       Technical Math                                                          3 hrs.
                     Prerequisite: Satisfactory ACT score MATH 101
_____      ____      Elective (BUS, CAS, ACCT, MGT, MKT) ____________                         3 hrs.
                                                                                             21 hrs.
Program   Course Requirements
CTE        210     Employability Skills                                                      3 hrs.
WELD       110     Introduction to Welding                                                   4 hrs.
WELD       115     Print Reading                                                             3 hrs.
WELD       118     Basic Metallurgy and Weld Testing Applications                            3 hrs.
                     Prerequisites: WELD 110, WELD 115, and MATH 105
WELD       125       Gas Metal Arc/Flux Core                                                 6 hrs.
WELD       131       Beginning Arc I                                                         4 hrs.
WELD       132       Beginning Arc II                                                        4 hrs.
WELD       135       Gas Tungsten Arc                                                        6 hrs.
WELD       210       Intermediate Arc/Cutting                                                6 hrs.
                     Prerequisites: WELD 125, WELD 131, WELD 132, and WELD 135
WELD       221       Advanced Arc/Pipe I                                                     4 hrs.
                     Pre/Corequisite: WELD 210
WELD        222       Advanced Arc/Pipe II                                                       4 hrs.
                      Pre/Corequisite: WELD 221
WELD        232       Pipefitting for Welders                                                    4 hrs
       OR             Prerequisite: WELD 221, WELD 222 or consent of instructor.
IET         220       Machine Tool Technology with lab                                           3 hrs
                      Prerequisite: IET 110 or WELD 110 or WELD 115
WELD        294       Co-op/Internship Training                                                 3-6 hrs.
                      Prerequisite: WELD 110, 115, 125, 131, 132, and 135 or consent of
                                                                                                54 hrs.
                      instructor

Total Hours Required for Associate of Applied Science Degree                                    75 hrs.

Additional Welding Technology Course Offerings:
WELD       293     Special Topics                                                               1-3 hrs.
WELD       201     Practical Applications for Welding                                           1-3 hrs.
                      Prerequisite: consent of instructor


Course Descriptions:
CAS 210/CTE 210 - Employability Skills and Customer Service. Three credit hours. This course is designed to help students/potential
employees recognize and develop positive personal qualities in preparation for successful employment. It also focuses on the
communication skills, customer service skills, effective interpersonal skills, productivity, ethical standards, and career development that are
in demand by employers.
WELD 110 - Introduction to Welding. Four credit hours. Provides an introduction and orientation to the welding industry and the various
cutting processes used. The course provides an in-depth study of welding hazards and discusses material data sheets along with common
safety procedures. Weld joints and weld positions are studied. Students learn the proper names of the parts of a weld and are able to
identify good welds and point out defects in bad welds. Students learn basic metal identification and metallurgy. Students learn the names
of common metal shapes. The course studies weld and metal testing techniques used in industry along with discussion of welding
certification, job opportunities, business opportunities and state and contractor licensing requirements.
WELD 115 - Print Reading. Three credit hours. Provides students with the knowledge to read and interpret blueprints and welding symbols
and transfer this knowledge to the workplace with layout tools and measuring instruments.
WELD 118 - Basic Metallurgy and Weld Testing Applications. Three credit hours. This course is designed to give students a basic
understanding of metal science and its relation to testing and design. The course will cover mechanical and chemical properties that are
crucial to any person dealing with metals as a profession. Students will also learn to interpret welding procedure qualifications and
specifications based upon American Welding Society standards. Prerequisites: WELD 110, WELD 115, and MATH 105.
WELD 125 - Gas Metal Arc/Flux Core. Six credit hours. Provides students with the basic theory of the MIG and Flux Core welding
processes along with safety requirements. Acquaints students with the various types of MIG gasses and machine settings that are used to
change from one type of metal transfer to another. Study the electrode classification system. Weld a variety of metal types and thicknesses
with the KIG, Flux core, and self-shielded wire. Welding will be done in all positions. Along with practice exercises, students must
participate in shop projects.
WELD 131 - Beginning Arc Welding I. Four credit hours. Provides students with the basic techniques of arc welding. Includes electrode
classification and welding nomenclature. Teaches the necessary metallurgy for these procedures and emphasizes the safety requirements
of these techniques. Students will weld common joints in all positions using a variety of different steel thicknesses and electrodes. Welding
skill will be developed through the use of practice welding along with shop projects.
WELD 132 - Beginning Arc Welding II. Four credit hours. A continuation of WELD 131.
WELD 135 - Gas Tungsten Arc. Six credit hours. Provides knowledge of the principles, terminology, gases, electrodes, and polarities used
in Gas Tungsten Arc Welding along with proper safety. Welding in all positions on a variety of metal thicknesses, shapes, and types.
Welding skills are applied toward shop projects.
WELD 210 - Intermediate Arc/Cutting. Six credit hours. Continuation of WELD 132 with a strong emphasis on WELD testing, testing
procedures, and code welding. Certification in the vertical and overhead position is expected. Arc metal cutting procedures such as
Advanced OFC, CAC-A, and PAC will also be covered. Along with practice exercises, students must participate in shop projects.
Prerequisites: WELD 125, WELD 131, WELD 132, and WELD 135.
WELD 221 - Advanced Arc/Pipe I. Four credit hours. Pipe welding theory, terminology and procedures will be studied. Students will weld
carbon steel pipe according to the API, ASME, and AWS codes with emphasis on welder qualification. Pre/Corequisite: WELD 210.
WELD 222 - Advanced Arc/Pipe II. Four credit hours. A continuation of WELD 221. Pre/Corequisite: WELD 221.
WELD 232 - Pipefitting for Welders. Four credit hours. Overviews fabrication of piping systems used in real life mechanical and facility
applications. Students will build and test pipeline from blueprints using a variety of fittings and offsets. Prerequisite: WELD 221, WELD 222
or consent of instructor.
IET 220 - Machine Tool Technology w/Lab. Four credit hours. Provides training and experience in the operation of drill presses, pedestal
grinders, band saws, lathes, milling machines, and precision grinding procedures. Instruction also covers shop safety, machine
construction, repair and nomenclature, speeds and feeds, cutting tool physics, and abrasives. Prerequisite: IET 110 or WELD 110 or
WELD 115.
WELD 294 - Co-op/Internship Training. Three credit hours. Practical applications in a welding industry/work environment only offered
during summer session. Prerequisite: WELD 110, 115, 125, 131, 132, and 135 or consent of instructor.
WELD 193/293 - Special Topics in Welding. One to nine credit hours. As announced. (May be repeated for credit with consent of instructor
and administrative approval.)
WELD 201 - Practical Applications for Welding. Practical Applications. Three credit hours. Provides welding students additional
opportunities to work in the lab. Assigned projects, approved by the instructor, will allow students to enhance current skills while learning
new skills. Prerequisite: consent of instructor.

				
DOCUMENT INFO