DIGITAL PRESSURE SENSOR
DP-100 SERIES OPTIONS
MS-DP1-F Flat attachment
Sensor mounting bracket MS-DP1-5
Conversion bushing MS-DP1-7
DP-100 is made even easier to use!
Accommodate to various kinds of mounting and piping.
Switch-over of the pressure port or flat mounting
on the wall is possible For short pressure port type
Dual 3-color display!
By mounting the flat
attachment to DP-10 -M,
pressure port and cable Flat attachment
can now be pulled out in
downward, left or right
directions. Flat mounting
Short pressure port type on surfaces such as the
DP-10 -M wall is made possible.
Previous model DP2/DP3 series
Short pressure port can be switched over to 3 possible directions to mount
(M5 female thread) DP-100 series.
30 mm Model No. Pressure port
MS-DP1-FM M5 female thread
MS-DP1-FR Rc1/8 female thread
MS-DP1-FN NPT1/8 female thread
Rear mounting is possible For all models 20 mm
0.787 in pitch
0.787 in pitch MS-DP1-FE G1/8 female thread
Sensor mounting bracket for rear DP-10 -M works even for piping
mounting MS-DP1-5 is available. arrangements on the wall.
Rc1/8 conversion bushing improves compatibility
with the previous model For short pressure port type
By equipping the push-in M5 female thread Rc1/8 female thread
converter with DP-10 -M,
pressure port can be converted
Model No.: MS-DP1-5
from M5 female thread to
* This illustration shows
the connection using Rc1/8 female thread.
Sensor mounting an elbow joint. Please Bore diameter conversion to the
bracket for installation have your own elbow
joint ready based on DP2/DP3 series is possible.
on the ceiling or the desired length. Conversion bushing
flooring is available. MS-DP1-7
Model No.: MS-DP1-1 Ceiling mounting Flooring mounting
Enriched panel installation For all models
Tight installation Replacement from DP2/DP3 series
is possible By using panel mounting bracket DP2/DP3 DP2
MS-DP1-4, existing panel mounting
Easy panel installation Front protection
can be completed with MS-DP1-3 holes can be used as they are to Front protection cover Remove
the use of a panel replace the existing model with MS-DP1-4
mounting bracket. DP-100 series. Only DP-100 series is Can be installed as is. Insert
able to unify the needed spare parts. DP-100
for DP2/DP3 series
* For newly designed set-up, please can be used as is.
bracket Panel mounting bracket MS-DP1-4
use panel mounting bracket
A single mounting hole! MS-DP1-2 for panel mounting.
PRECAUTIONS FOR PROPER USE
• This product has been developed / produced for industrial use.
• Never use this product as a sensing device for personnel protection.
• In case of using sensing devices for personnel protection, use products which meet regulations and standards, such as
OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country.
• DP-100 series is designed for use with non-corrosive gas. It cannot be used with liquid or corrosive gas.
DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the SUNX website (sunx.com).
MS-DP1-FM Flat attachment (Optional) MS-DP1-FR MS-DP1-FE Flat attachment (Optional)
Mounting drawing with DP-10 -M MS-DP1-FN
44.5 Mounting drawing with DP-10 -M
( 1.752 ) 37 1.457 52.5
24 ( 2.067 ) 37
30 11 30 11
1.181 0.433 1.181 0.433
1.752 24 24
0.945 2.067 0.945
6.5 0.256 6.5 0.256
5.5 0.217 5.5 0.217 13.5
2-"4.3 "0.169 0.787
24 0.551 8.5
0.945 0.689 2-"4.3 "0.169 20 0.335
30 0.787 Product distinguishing mark 17.5
1.181 24 MS-DP1-FR: 0 line 0.689
0.945 MS-DP1-FN: 1 line
30 MS-DP1-FE: 2 line
M5 female thread Material: Enclosure Polybutylene terephthalate (PBT) 1.181
(Glass fiber reinforced) Pressure port Material: Enclosure Polybutylene terephthalate (PBT)
Pressure port Stainless steel (SUS303) G1/8 female thread (Note) (Glass fiber reinforced)
O-ring Hydrogenated Nitrile Pressure port Stainless steel (SUS303)
Butadiene Rubber (H-NBR) O-ring Hydrogenated Nitrile
Weight: 15 g approx. (flat attachment only) Note: MS-DP1-FR has a Butadiene Rubber (H-NBR)
8.5 0.335 Two M3 (length 8 mm 0.315 in) screws, two M4 Rc1/8 female thread. Weight: 25 g approx. (flat attachment only)
(length 20 mm 0.787 in) screws are attached. MS-DP1-FN has a Two M3 (length 8 mm 0.315 in) screws, two M4
NPT1/8 female thread. (length 20 mm 0.787 in) screws are attached.
MS-DP1-5 Sensor mounting bracket (Optional) MS-DP1-7 Conversion bushing (Optional)
Mounting drawing with DP-10 -M
( 0.622 )
0.138 0.307 M5 male thread
1.181 ( 0.5
11 0.433 10 0.394 8
20 49.5 Rc1/8 female thread
0.787 28.5 1.949
1.5 Material: Brass (Nickel plated)
"4.5 "0.177 0.059 28 t 1.5
20 4.5 Weight: 10 g approx.
0.787 0.177 1.102 t 0.059
1.181 For details on sensor mounting bracket MS-DP1-1 and panel
mounting bracket MS-DP1-2 / MS-DP1-4, please refer to “SUNX
general catalog” or “DP-100 series catalog”.
All information is subject to change without prior notice.
2431-1 Ushiyama-cho, Kasugai-shi, Aichi,
Overseas Sales Dept.
http://www.sunx.com FAX: +81-568-33-8591
No. PCE-MSDP1F November, 2007