HONDA CIVIC TYPE R KIT

Document Sample
HONDA CIVIC TYPE R KIT Powered By Docstoc
					                     GALLOWS FARM, HULL ROAD,ALDBROUGH,HU11 4RE

                           HONDA CIVIC TYPE R ROAD SPECIFICATION KIT
   Contents
   1. Tubular front subframe
   2. Inboard front shockers and springs in aluminium and adjustable for ride height/damping
   3. Bottom wishbones in CDS steel with rose joints
   4. Top wishbones in aluminium with left and right hand rose joints adjustable for caster and
       camber on the car
   5. Set of rose jointed push rods and levers
   6. Aluminium throttle pedal adaptor and bearing
   7. Battery brackets
   8. Aluminium fuel tank
   9. Aluminium and plastic radiator
   10. Gear lever and two gear cables
   11. Full tubular roll cage
   12. Engine mounting brackets to accept original Honda VTech rubber engine mountings
   13. Standard manifold with stainless steel exhaust system and silencer
   14. Rear suspension arms in CDS steel with rose joints adjustable for camber and toe
   15. Two race spec drive shafts (original VTech joints required)
   16. Rear aluminium shock absorbers and springs adjustable for ride, height and damping
   17. Rear brake discs, pads, calipers and handbrake cable
   18. Powder coated in satin black as standard or pearlescent colours add £100
                                     Cost of the above is £5450

PERFORMANCE MODIFICATIONS VTech KIT
Stage 1
HYDRA ENGINE MANAGEMENT this is a plug in aftermarket Engine Management system and
wiring loom, developed by ZCars for their V Tech kits. It comes complete with its own wiring loom
which only then requires 12 volt feed and earth to make it run. With the standard kit exhaust and
silencer, the results are a 10% increase in top end bhp to 220 but the real gains are to be found in the
mid range torque. This is achieved by careful mapping of the VTech system and operating it earlier in
the rev range, something that other systems struggle to cope with.
ECU and LOOM complete £1220
Stage 2
Four into two into one stainless steel performance exhaust manifold gives another 15 bhp if used in
conjunction with above HYDRA system £720
Stage 3
46mm individual throttle bodies and inlet manifold increase power by a further 20bhp to give a total
of 255 bhp £750

STAGE 4 SUPERCHARGER KITS AVAILABLE TAILORED TO SUIT YOUR NEEDS WITH
                  UP TO 400BHP AND 275 lb ft TORQUE
                        PRICE ON APPLICATION

 All prices are exclusive of VAT and correct at the time of going to press, subject to alteration at any time without notice
  Please feel free to visit our website at www.zcars.org.uk or call us on 0844 414 0624 for a chat. Factory visitors are
always welcome. Demo rides are available by appointment only. We are open most weekends, just email or call for details


                     TEL: 0844 414 0624/01964 527725 – FAX: 05601 536168
                                      sales@zcars.org.uk

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:73
posted:3/2/2010
language:English
pages:1