BIS-CODE--INDIAN-STANDARD-for-Structural-Engineering by asafwewe

VIEWS: 16,803 PAGES: 5

More Info
									   BIS CODE : INDIAN STANDARD for Structural Engineering

IS: 800-1984                 Code for practice for general
                             construction in steel.

SP6 (1)                      Handbook for structural steel
SP:6(5)-1980                 Hand book for Cold formed, Light
                             Gauge steel structures.

SP:6(6)-1972                 Handbook for application of
                             plastic theory in design of steel
SP:6(4)-1969                 Project & Construction
                             Management for Large Industrial
IS: 206 -1992 (4th Rev)      Tee & strap hinges - Specification.

IS: 459 -1992 (3rd Rev)      Corrugated & non-corrugated
                             asbestos cement sheets -
IS: 730 -1978 (2nd Rev)      Hook bolts for corrugated sheet
                             roofing - Specification.

IS: 801 -1975 (1st Rev)      Code of Practice for use of cold -
                             formed light gauge steel structural
                             members in general building
IS: 802 -1977 (2nd Rev)      Code of Practice for use of structural
                             steel in (Part-1) overhead
                             transmission line towers - Loads
                             and permissible stresses.

IS: 804 -1967 (1st Rev)      Rectangular pressed steel tanks -

IS: 806 -1968 (1st Rev)      Code of Practice for use of steel
                             tubes in general building
IS: 808 -1989 (3rd Rev)      Dimension for hot rolled steel beam,
                             channel and angle sections.

IS: 811 -1987 (2nd Rev)      Cold formed light gauge structural
                             steel section - Specification.

IS:813 -1986 (1st Rev)       Scheme of symbols for welding.
IS: 814 -1991 (5th Rev)    Specification for covered electrodes
                           for manual metal arc welding of
                           carbon & carbon manganese steel.

IS: 822 -1970              Code of procedure for inspection of

IS: 875 -1987(2nd Rev)     Code of Practice for design loads for
                           buildings & structures.
                (Part 1)
                           Dead loads
                (Part 2)
                           Imposed loads.
                (Part 3)
                           Wind loads.
                (Part 4)
                           Snow loads.
                (Part 5)
                           Special loads & load combinations.
IS:1024 -1979 (1st Rev)    Code of Practice for use of welding
                           in bridges and structures subjected
                           to dynamic loading.

IS:1038 -1983 (3rd Rev)    Specification for steel doors,
                           windows & ventilators.

IS:1081 -1960              Code of Practice for fixing & glazing
                           of metal doors, windows and
IS:1148 -1982 (3rd Rev)    Specification for hot rolled steel
                           rivet bars (Up to 40 mm diameter).

IS:1161 -1979 (3rd Rev)    Specification for steel tubes for
                           structural purposes.

IS:1182 -1983 (2nd Rev)    Recommended practice for
                           radiographic examination of fusion
                           welded butt joints in steel plates.

IS:1254 -1991 (3rd Rev)    Specification - Corrugated
                           aluminium sheet.

IS:1323 -1982 (2nd Rev)    Code of Practice for oxyacetylene
                           welding for structural work in in
                           mild steel.

IS:1361 -1978 (1st Rev)    Specification for steel windows for
                           industrial buildings.
IS:1363 -1992 (3rd Rev)            Hexagon head bolts, screw and nuts
(Parts 2 & 3)                      of product grade C-Screw (M5 to

IS:1364 -1992 (3rd Rev)            Hexagon head bolts, screws and nuts
(Part 4)                           of product grade A and B - Thin nuts
                                   (M1.6 to M64)

IS:1395 -1982(3rd Rev)             Specification for low & medium
                                   alloy steel covered electrode for
                                   metal arc welding.

IS:1477 -1971(1st Rev)             Code of Practice for painting
                                   offerrous metal in buildings.

               (Part 1)            Pretreatment

               (Part 2)            Painting

. IS:2062 -1992 (4th Rev)          Specification for steel for general
                                   structural purposes.

IS:3443 -1980(1st Rev)             Specification for crane rail section

IS:3548 -1988(1st Rev)             Code of Practice for glazing in
IS:3600                            Method of testing fusion welded
Part 1 -1985                       joints and weld metal in steel.
Part 3 -1984
Part 4 -1984
Part 5 -1983
Part 6 -1983
Part 7 -1985
Part 8 -1985

IS:3757 -1985(2nd Rev)             Specification for high strength
                                   structural bolts.

IS:3964 -1980(1st Rev)             Specification for light rails.

IS:4000 -1992 (1st Rev)            High strength bolts in steel

IS:4049 -1988 (2nd Rev) (Part 1)   Specification for formed ends for
                                   tanks and pressure vessels.

IS:4260 -1986(2nd Rev)             Recommended practice for
                                   ultrasonic testing of butt welds in
                                   ferritic steel.
IS:4351 -1976(1st Rev)       Specification for steel door frames.

IS:5504 -1969                Specification for spiral welded
IS:5872 -1990(2nd Rev)       Specification for cold rolled steel


IS:6533 -1989(1st Rev)       Code of Practice for design and
                             construction of steel chimney.
             (Part 1)
                                       Mechanical aspect
             (Part 2)
                                       Structural aspect
IS:6623 -1985(1st Rev)       Specification for high strength
                             structural nuts.
IS:6649 -1985(1st Rev)       Specification for hardened and
                             tempered washers for high strength
                             structural bolts and nuts.

IS:7205 -1974                Safety code for erection of
                             structural steelwork.
. IS:7215 -1974              Tolerances for fabrication of steel

IS:8500 -1991(1st Rev)       Specification for micro-alloyed
                             structural steel.

IS:8629 -1977 Part (1 & 3)   Code of Practice for protection of
                             iron and steel structures from
                             atmospheric corrosion.
IS:9172 -1979                Recommended design practice for
                             corrosion prevention of steel

IS:9178 -1979                Criteria for design of steel bins
                             for storage of bulk materials.
             (Part 1)
                             General requirements & assessment
             (Part 2)        of loads.

                             Design criteria.
IS:9417 -1989 (1st rev)      Welding of cold rolled steel
                             bars for reinforcement concrete
IS:12040-1987                             Guidelines for development of
                                          vendor rating systems.

IS:12843-1989                             Tolerances for erection of steel
                Free Engineering Services by IIT Alumni Ranchi Chapter

To top