TECHNICAL SPECIFICATION
Blower-German make Pre Filter Hepa Filter VOC Filter: Unit capacity: Mounting: Power consumption: Filter replacement Electrical supply : : : : : : : : Backward impeller type Synthetic PU washable Efficiency 99.97% @ 0.3 microns Unique blend of activated carbon and alumina 350 CFM To be done outside VF Lab on any Wall 90 Watts maximum as per auto indication 100/110 volts OR 220/240 volts 50/60 Hz
Lab Guard
Positive Pressure System
specifications subject to change without notice
Ordering information
Lab Guard LG 300 Lab Guard LG 300 Spare Filter Set Return Blower 100 120 Volts 60 Hz order code 220 240 Volts 50 Hz order code order code order code FX FX FX Fx 2045 2046 2047 2048
LG 300
Dimensions
590 mm 470 mm
C Q
Traceability calibration in accordance with national and international standards, NIST USA
For more details go to
www.shivaniscientific.com
Individual and expressive quality control certificate
Shivani Scientific Industries (P) Ltd
26A Raju Industrial Estate, Penkar Pada Road Near Dahisar Check Naka, Mira-401104 Dist. Thane (Mumbai) Maharashtra, INDIA e-mail sales@shivaniscientific.com ssipl@bom5.vsnl.net.in
Distributor
Tel - + 91 22 2845 6768 + 91 22 2845 6769 + 91 22 2845 6770 Fax - + 91 22 2845 7140 + 91 22 2845 6766
800 mm
We make it possible
Guard Lab Pressure System Positive
LAB GUARD
Positive Pressure System
DESIGN
The LAB+GUARD has been designed with State of the Art technology using 4 stage filtration system. The unique filter combination filters out air and gas contaminant thus by giving most suitable air for gametes and embryos. LAB+GUARD system contains a unique 4 stage filtration system containing Prefilter, Hepa Filter and unique blend of activated carbon and alumina, which ensures wide variety of Gases, particular contaminants are oxidized or are absorbed. The LAB+GUARD has been designed to reduce the microbial air flora to the minimum level.
CONCEPT
The LAB+GUARD is developed to improve the laboratory air quality making it nearly equal to clean air. Thus replenishing and subsequently nourishing the entire laboratory, making it safe for the sensitive procedures to be executed. This is achieved by a number of inclusions and their applications all of which are simple, cost effective and user friendly. The positive pressure system uses the basic principle of “Over Pressure or positive pressure in a room which restricts the entry of outside air”. This is achieved by absorbing the circulating air outside the IVF Lab (Room) and then subsequently passing the same through a series of 4 stage filters thus making it quite IVF friendly. Thus ultimately the effective, circulating air in the IVF lab reaches a near clean air status, provides a positive pressure, reduces the CFU count, eliminates the SPM, VOCs and CACs.
Return Blower
LAB GUARD
LG 300
IVF LAB
UTILITY ROOM
Fresh Air
OPERATING SECURITY
Every care has been taken in designing to make sure that air absorbed is thoroughly cleaned for contaminants and to reduce bacterial count in IVF Lab. The LAB+GUARD design also facilitates introduction of fresh air into the air circuit which gives maximum safety from Carbon dioxide released into the IVF Lab by CO2 Incubators and also it protects embryologists from gas mixtures released on work stations.
RETURN BLOWER
The return blower is utilised to circulate back the air of IVF lab to room where LAB+GUARD has been fitted.
REDUCES CFU, REDUCES VOC
The unique design and the concept of LAB+GUARD positive pressure system not only reduces VOC content in the air but also the CFU count in the IVF Lab. The LAB+GUARD not only protects embryos and gammas but also protects embryologists who is the most affected otherwise.
UPGRADING, EXPANDING OR SETTING UP NEW IVF LAB?
The LAB+GUARD team helps you in evaluation of possibilities to improve air quality in your lab. If you are upgrading, expanding or setting up new lab contact us for technical assistance.
CHANGE FILTERS AS PER USAGE
The LAB+GUARD also houses a unique automatic indication system whereby the user is informed when to change the filters, and not “every quarterly”. This feature not only gives tremendous relief to the user for tracking the stipulated time of change but also saves lot of money.
WHO BREATHS CO2 IN YOUR IVF LAB ?
If your lab does not have regulated fresh air intake or positive pressure design, there are every chances that your embryologists are breathing out CO2 tanks emptied ever year. Since CO2 can not be absorbed or filtered by Indoor air purifiers or filters. The LAB+GUARD facilitates introduction of fresh air and reduces the risk of high CO2 concentration into the IVF Lab.
ENSURE NET FLOW OUT
In any HVAC/air flow design it is essential that net flow is going out of the room. This means room air volume and pressure should be slightly higher than adjoining areas/rooms. This will keep out any toxic fumes trying to come in. IVF labs which are not having adequate positive pressure are suceptible to risk of contamination.
MAINTENANCE
The LAB+GUARD has automatic indication for Filter change and the design facilitate extremely easy replacement of filters even by non technical staff. Other than filter change it is virtually maintenance free.
Split A/C
Lab Guard